Material not subject to inventory management

Hi all,
While creating Stock transort order through SD route, it says material not maintained in inventory managemntment, though the material is very well maintained in the particular plant, and in the view Plant / Storage data as well. Also the plant parameters have been maintained.
Please advise.

hi
Please check the material type. is it is for value and quantity update is ticked.
Regards,
vijay

Similar Messages

Error "Material not subject to inventory management in Plant " on the STO

I want to create a Stock tansport order ( plant to plant transfer) with stock & non-stock item and non stock item is giving an error "Material not subject to inventory management in Plant". Please tell me how to clear this error. Plant / SLOC view is already maintained and no qty/value update selected on the material type because of non stock item. Please tell me how to overcome this error on the STO

Hello,
As you said you want to move nonstock item through STO.
It seems that in your case say for example your plant 1000 has material ABC which is maintained as stock item.
Now you have another plant 2000, whaich has same material ABC which is maintained as non-stock item (generally used in third party sales or cross docking).
If your material ABC is nonstock in plant 2000 where no stocks are mainatined, then how can you move the stock to plant 1000 where it is stock item.
Could you please confirmthat can you see the stock in MMBE for plant where that material is maintained as non stock item.
If so, then you have chnage the plant specific material status for that plant from non stock item to stock item.
This is maintained in material master in purchasing view.
The other way out is you have to third party sales with ship to party as the plant where that item is maintained as stock item.
In this case flow is
Sales order>>Purchase requistion>>Purchase order>>(Vendor supplies material directly to customer (which is you plant where that item is stock item))
Br,
Tushar
Instead you can acheive

Error: material not subjected to inventory management in a plant

While creating a STO . I am getting the following error
Error: material not subjected to inventory management in a plant
What should be done??????????/

Dear anamicabhardwaj ,
You need to check transaction OMS2 for the material type you use for the material.
Basically for STO which need to inventorized, the quantity updating need to check
for the material type, then only it can be inventorized. There is no other option but check
the quantity update indicator.
Regards,
ian, Wong Loke Foong

Material not subjected to inv. management

hai
this is regarding po.when we r raising po system showing following error. material not subjected to inv. management
in plant(x).
regards
jayakar

Hi,
Use T.code: OMS2 & selct ur materail type ( used for creation of materil), click quantity updating and value updating , in Next screen, select ur plant plant(x). & select check box of quantity updating and value updating and save.
Now try ur transaction
Regards,
Biju K

Material is subject to inventory management in care unit storage facility

Dear All,
when using Transaction NMM5 for material requisition the system displays the message
"Material is subject to inventory management in care unit storage facility"
what steps are required to overcome this error.
I have already assigned storage location and plant to the nursing OU in NB20 for which the
material is required.
Please assist.
Regards
Ramit

Go to MM02, select the Purchasing view of that material and check whether any value is maintained for the field Plant specific matrl status
thanks
G. Lakshmipathi

Material not subj. to inventory mgmt. in plant F315 (Pl. check your input)

Sir,
i am facing an issue while making sto's
the error is as follows "Material not subj. to inventory mgmt. in plant F315 (Pl. check your input)"
do i need to customise some settings
ply help
regards
amey

Hi
Go to OMS2 click material type for this material you have taken..
Then click quantity/value updating, then for your valuation area ( i.e plant), click the quantity updating and value updating indicator.
Regards,
Raman

Material not subj. to inventory mgmt. in plant

Dear All,
During stock transfer, while creating PO I am gettinh an error "Material not subj. to inventory mgmt. in plant " msg no.- ME124.
though i have maintained all parameters. Please help me to find where I am missin??
Regards-
Ram

Hi Ram,
Go into IMG > Logistics general > material master > Basic Settings > material type > Define Attributes of Material Types
Select your material type and click Quantity/Value update.
Please do the above necessary customization, Hope this helps.
Regards
MT

Listing material not in the inventory

Hi everyone.
I want to know if there is a transaction or a report that allows us to list all the material not in the inventory since a date that the user will input.
I'm a programmer but before starting developping a specific program for that i need to be sure that nothing like that already exists in the standard.
Thanks for your suggestions.

Hello,
MB51 will list all material movements that's why you may have several records for one materials (it depends how busy the WH staff was...:) )
You can create a report with uniq materialID through PIVOT table but of course it isn't the exact solution I think...
One more idea:
There's a report MB5B where it is possible to give both date and MVT as filter criteria and if you choose 'Ttls only' you will get one 'section' per material.
(Sorrowfully the format of the output of this report is very poor and I haven't succeded in running it with MVT)
BR
Csaba

ATE does not display SAP Inventory Manager 4.0 screens properly

We're implementing SAP Inventory Manager 4.0 running on SMP 3.0 SP3 PL3. Testing the application in Agentry Test Environment is not possible as screens do not get rendered properly regardless of the platform selected. We've tried with multiple versions of ATE from SMP 3.0 SDK SP1 through SP4. None of those works. Because no buttons are rendered there is no way to interact with the app in ATE.
Could some prerequisites be missing? We've tried on a Windows 7 machine as well as the SMP server itself (Win Server 2008) getting the same exact results.

Lukasz,
Win32 screens were removed from the newest IM release because the WPF uses Tablet (iPad) screens. You can test in the ATE using the PPC screens by making a change to your screensets.ini file that sits in your application directory. We use this trick in product development to test using ATE:
Change your Win32 section in screensets.ini to be as follows:
[Win32]
1=PPC
After bouncing the server, using the above will allow you to debug the PPC screens. We do this for all our testing.
Jason Latko - Senior Product Developer at SAP

Non-cumulative Values not showing in Inventory Management Queries

Hi:
Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

Found the problem. It had to do with the compression variant in the delta process chain. The compression was set to 'no marker update'. Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up. Reinitalized and the deltas are working correctly now.

Inventory management in plant

Dear All,
I am facing problem while performing STO, It is showing error that BAPI Material not subject to inventory management in Plant XYZ.
Please help me out.
Thanks in advance for ur valuable input.
Regards
AJIT K SINGH

Dear
Pls Check your setting for the materila type for this material in OMS2, is Qty updation & Value updation is activated ( ticked),
and also for your plan XYZ extend the materila master for Purchasing view..
Amin.

Material Subject to Batch Management

Dear All,
In production client, the user by mistake has put the tick for batch management while creating material.Actually, the material was not subject to batch management.
Later, PO was created. At the time of GR against this PO, the store clerk could not recognise that the batch has been created while doing MIGO.
Afterwards the store incharge found this. We reversed the material document and tried to correct the material by removing the tick.
Now issue is the batch mangement tick in material master is not getting removed though we have reversed/cancell the material document.
We have no stocks of the material. This was the first time created material. This was the only GR which happened and that we have already reversed. No goods issue has been done. There is no subsequent document to it. No invocie has been done.
This problem was identifed immediately after the MIGO.
We have tried everything the batch management tick is not getting removed.
Pl provide solution.
Regards

Hi,
DF - deletion flag (the trush bin in ME22N)
It is interesting that you did GR and you have no stock... No stock means that not only 'no stock' at the moment, but any day from the last day of the previous period till now.
If you did GR 2 days ago you had stock on that day.
In this case you'd better cancel the goods movement. And it was also told that no stock is not enough (e.g. your batch master exists and it has to be archived).
Please try to change and check what SAP says.
Regards,
Csaba
Edited by: Csaba Szommer on Sep 18, 2008 10:45 AM
Edited by: Csaba Szommer on Sep 18, 2008 10:46 AM

Error message rgd. Material Movements / Inventory Management

Hello,
We have Problem to load Material Movements data in Inventory Management InfoCube.
On BW-Side we had deleted Inventory Management InfoCube content completely before we started with opening stock, Material Movements.
We have filled set up tables for opening stocks, Material Movements and Revaluation successfully on R/3 Side. We have also filled archive data for Material Movements and Revaluation in set up tables.
We have loaded the opening stock balance into InfoCube. The request containing the opening
stock has been compressed.
We are trying to load the material movements (Initialize delta) into Cube. We get the error message:
u201CThe material XXXXXXXX does not exist or is not activatedu201D.
We have analyzed these materials (from error message) and find out that these materials are already archived on R/3 side but these materials are in Master Data table on BW-Side.
How we can deal with this problem? The BW-System is SAP NetWeaver 2004s (Support
Package SAPKW70016). The SAP R/3-System is SAP ECC 6.0.
We had same proceeding in March 2008 with BW 3.0B and R/3 4.7 and had no problem at all.
Many thanks

Hi,
Hope u have loaded the master data in BW side and also activated the Master data i.e i assume that u have done Attribut change run.
Rgds
SVU123

Integration SMP 3.0 and Inventory Manager 3.2 / 4.0

Hello,
I have a Little doubt. For an Implementation of Inventory Manager after I have installed/configured the SMP 3.0 or SMP 2.3, in order to actívate the Agentry for Inventory Manager, Do I have to install the Inventory manager server (Agentry Server) which I had downloaded with Inventory Manager Package from services marketplace? or Do I have to install Agentry server which came with SMP, and after that just configure the deployment package as application within the SMP? ... I'm a Little bit confused because I think these deployment files (bundle) are on the agentry server that came with the Inventory Manager package (that is why the question was raised) and if I do not install the Inventory Manager Server I wont be able to get this bundle. Another questions is: In case the inventory manager server must be installed in order to make the agentry / SMP integration work for this standard app, If after this implementation We want to develop /configure another agentry apps, Can I do this with the agentry server installed for Inventory Manager (Inventory Manager Server) and not the "generic" one that came with the SMP?
Please Help Manju Venkatesha Michael Appleby Steve Streeter Jason Latko
Best Regards,
Mariana

Hi Manju Venkatesha & Stephen Streeter
Let me see if I understood what you guys answered me on this post...
1.- The agentry server is built on SMP 3.0 & SMP 2.3 and the standalone server on SMP 2.3 is only configure for development. Now, I have a another question about this...
Q.- if I need to configure the agentry's development environment besides Inventory Manager Mobile App, Does the SMP 2.3 developer server need two agentry server (The one built within SMP and the standalone for development process)? or just standalone server? or just SMP Server with Agentry generic server built within?. I understood production environment only will have one... the "generic" agentry server... as Steven said "SMP 2.3 needs to be use for QA and production", but i have this question regarding development server.
2.- Manju, We can install either IM 3.2 or IM 4.0, the thing is we are reviewing what versión is better to implement So I need to clarify my doubts for implementation process on both versions. The steps you mentioned put me in context and gives me some lights about the process, now, when you wrote: "Download Inventory Manager from service marketplace (it comes exe file)", is this the mobile server called "Inventory Manager 3.2.0 Sever" for IM 3.2 / "SAP Inventory Manager 4.0.1 Deployment" for IM 4.0?. The confusion raised here because the wizard for the mobile server that comes with mobile application implementation package, it is almost the same of Agentry standalone server, besides the SAP Backend information, it's pretty much the same wizard. In fact I think it will create a file system directory similar to standalone agentry server... So, my question about this is:
Q.- If the answer to my previous question: Does the SMP 2.3 developer server need two agentry server (The one built within SMP and the standalone for development process)? , is yes… and as you remark on your steps I need to install this mobile server (exe file), Is this mean that I need to install three agentry server on the development server (generic, standalone, mobile server)?, What happen with the file system directory for the agentry standalone dev server and inventory manager mobile server? Do they will merge in one??? And if I need to modify the inventory manager mobile app: which agentry server will be my development environment?
The SMP 3.0 which has the agentry component integrated and does not need a standalone one will need the "mobile server", does it? (exe file within SAP Inventory Manager 4.0.1 Deployment I guess or Inventory Manager 3.2.0 Server) and what about if I need to customize something on IM 4.0? The changes will be publish directly to the agentry component within SMP 3.0?
Another thing, is the Inventory manager server (mobile server) will give me the jar file from which I can get the IM agentry project for Inventory manager mobile app customization?
I know I can be confusing on my questions but please help me understand
Thank you both for the information / help you could give me ...
Best Regards,
Mariana

Inventory management: posting block : material master field

Hi,
In het material master you have a field Physical Inventory Blocking Indicator, but when I create a counting document (MI01) with posting block. The field in the material master is still blank. How can this happen?
Best regards,
Eric.

Hi Eric,
I guess there is some inconsistency in your system,
Please refer to the SAP Note 355939 & 192571 and you might be able to fix the bug..
Note 355939
Summary
Symptom
This note is only of importance for you if you execute physical inventory functions using the R/3 System. The inconsistencies can usually be adequately eliminated using Note 192571. This note is only intended for customers who did not discover the inconsistency in the first period of the new fiscal year and who now have problems with the physical inventory indicators.
Additional key words
RMMMPERI, MMPV, physical inventory, PIINKON, MARD-KZILL, MARD-SPERR
Cause and prerequisites
See Note 192571.
Solution
To eliminate the inconsistencies, carry out the following steps in the corresponding sequence:
1. Implement the corrections from Note 192571
2. Also implement the attached correction instructions
3. Start program ZREPPI_FLAGS (from Note 192571)
4. Start program ZINVUT30 (from Note 67072)
Source code corrections
Note 192571
Summary
Symptom
Preliminary note:
This note only applies to you if you execute physical inventory functions in the R/3 System.
In the log of the period closing program running during the fiscal year change, the number of the records closed does not correspond to the actual number of records in the corresponding stock table on the database.
As a result, the physical inventory indicators were not moved from the current fiscal year to the previous year in the records that are not closed. This means that materials, for which a physical inventory was carried out in the previous year, are dealt with by the system as if a physical inventory has already been carried out in the current year.
This problem can affect materials created before the upgrade to Release 4.5.
Additional key words
RMMMPERI, MMPV, inventory, PIINKON, MARD-KZILL, MARD-SPERR
Cause and prerequisites
The problem is caused by a program error.
Solution
If you have not yet carried out the fiscal year change (for example, if you have a fiscal year variant with non-calendar fiscal year), the attached correction can correct the error.
If you do not yet use Release 4.5B with at least Hot Package 09, in the four following form routines you must implement the deletion/insertion sequence listed in the attachment only once. Do not implement them twice each time as described in the "Corrections" section.
- Form MARD_UPDATE_JW_DB2DB4
- Form MCHB_UPDATE_JW_DB2DB4
- Form MSKA_UPDATE_JW_DB2DB4
- Form MSKU_UPDATE_JW_DB2DB4
Caution: Implement the corrections WITHOUT comment lines or added comments !!!
Comments between EXEC SQL and ENDEXEC can lead to the 'DBIF_DSQL2_SQL_ERROR' at the fiscal year change.
If you carried out the fiscal year change in Release 4.5 or 4.6A and use R/3 Physical Inventory Management, you can, after implementing the attached correction in your system, repair the affected records as follows:
Run correction report ZREPPI_FLAGS.
After the execution of report ZREPPI_FLAGS, you should implement report ZINVUT30 mentioned in Note 67072 in your system and execute the report for those materials for which a physical inventory has already been executed in the current fiscal year.
If you recognize the inconsistency only in a later period, also refer to Note 355939.
Trust this helps
Regards
Merwyn

Material not subject to inventory management

Similar Messages

Maybe you are looking for