Material num and Plant is not displaying in Output

hi
i have written this code to get all inspection types...
while compiling im getting the correct output...
it is displaying only inspection types ....
Material num and Plants are not displaying..
form PROCESS_DATA .
CLEAR: WA_FINAL,
WA_QMAT.
MOVE IT_FINAL TO I_FINAL.
REFRESH IT_FINAL.
LOOP AT I_FINAL assigning <fs_fin>.
LOOP AT IT_QMAT INTO WA_QMAT where MATNR = <fs_fin>-MATNR.
P_werks = <fs_fin>-werks.
IF SY-SUBRC EQ 0.
<fs_fin>-ART = WA_QMAT-ART.
APPEND <fs_fin>-ART TO it_final.
CLEAR WA_QMAT.
CLEAR wa_final.
ENDIF.
ENDLOOP.
ENDLOOP.

Hi
ya im getting correct values to <fs_fin>
now its displaying correct values bt in improper format
Mat num Plant insp type
100001 1210 05
100002 1320 01
 02
 03
 05
bt i want the output as below
Mat num Plant insp type
100001 1210 05
 02
 03
100002 1320 01

Similar Messages

Value and quantity is not displaying in Tcode MC.9 for some materials

Dear Sir,
For the material XYZ Material Type is FERT but when I check the stock in MC.9 with material type FERT, it is not displaying any value and quantity but when I donu2019t put any Material Type it is showing me the value with quantity. Even I tried to change the material type to FERT there also it gave me message as "No data exists for chosen selection". Why this massage is showing like this ?
Please suggest.
Regards,
Sandip Sahu

Hi,
Some times there are some issues with S032 info structure. Check report RMCBMBEW and see if you can locate your material,
Thanks

Excise Duty, Cess and Secondary Cess not displaying in J1IIN

Dear Frnds,
I need a solution for Excise Duty, Cess and Secondary Cess not displaying in J1IIN ( WHILE EXCISE ) but in Invoice it is calculated correctly., ( ie., i need CENVAT Posted, not utilized
after excise invoice generated )
kindly suggest me...
Thanks & Regards
T.Arulvanan

HI.
Plz check the forllowing settings,
IMG - Logistic General - Tax on Goods Mvt - India - Basic Settings -
1. Maintain Excise Registrations -
Check Proper Indicator for Cess and other settings.
2. Maintain Company Code Settings
3. Maintain Plant Settings
4. Maintain Excise Groups
5. Maintain Series Groups
6. Maintain Excise Duty Indicators
-- Determination of Excise Duty
7. Select Tax Calculation Procedure
--Condition-Based Excise Determination
8. Define Tax code and assign it to company code
Properly maintiain fallowing settings and try again..
Prashant

How can i get the open sale orders for given material no and plant

Hi,
I have to retrieve the open sale orders depending on the material number and plant.
For only open sale orders at header level and item level.
I want to use VBUK-GBSTK to find open sale order at header level and
                      VBUP-GBSTA at item level.
Can any one suggest me the best logic as performance is concerned?
Thanks,
Kumar.

hi Prasanth,
select werks matnr from ZVSCHDRUN into table it_plant.
sort it_plant by matnr werks.
select
        vbeln
        posnr
        matnr
        werks
        erdat
        kbmeng
        vrkme
        from vbap
        into table it_vbap
        for all entries in it_plant
        where matnr = it_plant-matnr and
              werks = it_plant-werks.
and again i have to write one more select query for vbup.
am i right?

I purchased a movie via Itunes and it does not display as a purchased item on my Apple TV yet A TV show I bought does.

I purchased a movie via Itunes and it does not display as a purchased item on my Apple TV yet A TV show I bought does. The only way I can view it is if I turn on home sharing and the movie is downloaded to my PC. Is this normal?

Welcome to the Apple Community.
Perfectly normal, purchased items only applies to TV shows, the studios have not licensed movies for redownloading.

Chinese and Korean characters not displaying in navigation pane

I have an issue with Chinese and Korean characters not displaying on the tabs in the navigation pane:
I have 2 RoboHelp projects (using RoboHelp 8 with the updates installed) to generate WebHelp, one in Simplified Chinese, the other Korean. The HTML files, .HHC and .HHK were sent out for translations. I have set the appropriate language in the project settings, everything almost works, except for the text on the Contents, Index, and Search tabs. (I'm not using a skin.) I have read in various threads that the lng file should be edited using the RoboHelp interface, and this seems to be the crux of the problem. The characters do not display correctly through the RoboHelp UI.
The computer on which I generate the WebHelp is Windows Server 2003, and I do not have the language packs installed. (And am having problems getting hold of the language packs to install to see if this fixes the problem.)
Aside from installing the language packs, is there anything else I can try to help resolve the problem? (The characters in the content are displaying as expected.)
Any assistance is greatly appreciated

Perhaps something in the Translation Info section of this page might help? (The specifics are for Japanese, but I believe the issue would apply to all double-byte languages).
http://helpware.net/FAR/far_faq.htm#JapComp

HT1430 my iphone 4 has suddenly ceased to work with a full battery and switch will not display slider. How can I reactivate it?

My iphone 4 has suddenly ceased to operate with a full battery and switch will not display slider. How can I reactivate it? Is the memory gone? Will T Mobile replace the memory or the phone if necessary?

Hello,
If you're in a country where there's an apple shop (unfortunately not mine), go check it and ask the employee about it: he's gonna check your Iphone on a "device"
I've got an iphone 5 and it's working very well with me but I have to admit that its battery lasts (slower) than my Ipad 2.
Still i can help with some tips that may improve your iohone's battery by an hour in addition (hopefully):
- close all apps by multitasking....
- do NOT keep the brightness to the max
Believe me you're gonna regret changing your phone to a samsung
Hope i've helped and sorry for my bad english (has english as 3rd language)

HT4157 I have an iPad 2 and it does not display the cellular data button under settings

I have an iPad 2 and it does not display the cellular data button under settings. It does display a Bluetooth button in its place. I have tried the reset but no luck

Is the iPad the Cellular version? Does it have an active Data plan? Does it have a Sim card installed in inside it?

Firefox and Twitter and Finder does not display

I have recently upgraded to Lion recently. The Transition was way rougher compare to the Snow Leopards.
I am running a MBP 15", 2009 Mid-2009 version.
It has 2 graphic cards on board, 9400m and 9600GT.
When I first launched Lion, I was quite shock that my Firefox and Twitter do not display at all.
After tweaking the system preferences, I realized that when the 9400m graphic card is activated, there isn't any display on several of the Applications,
including the popular ones like Finder, Twitter and Firefox. The issues are fix when I switch to my 9600GT graphic card.
Do any of you have the same issues that I am facing?
I do hope Apple resolves these issues quickly.
As using my 9600GT graphic translate to very bad battery life and a very warm laptop! I am not happy at paying $29.99 for something that breaks.

Hey kennychan,
I've had the same problem. I've done a clean re-install on a reformatted drive and the problem was gone. If you can do a clean reinstall I recommend you give it a shot.
Best wishes,
Dmitry

I have placed a photoshop file within a new picture and it will not display

i have placed a psd file within a new psd file and it will not display. It flashed on the screen for a moment and then disappeared, and no matter how many times I try, it will not show

I started a new file, placed the image and the screen went into a bizarre pattern. I ended up closing the program and starting fresh and it worked properly. Something went wonky during the session I guess.

Street and Country are not displaying on the Form

Hi all,
Does anyone know why the STREET and COUNTRY is not displayed on form?
I have debugged into SAPscript, the value for REGUH-STRAS and LV_REGIO is there, but somehow it just cannot display on the form.
/ &REGUH-NAME1&</></>
/ &REGUH-STRAS&</></></></>
/ &REGUH-ORT01&</></></></></></>
/ &REGUH-PSTLZ&</></></></></></></></>
/ &LV_REGIO&</></></></></></></></></></>
Please advice and thanks in advance.

Hello,
Use Condence symbol 'C' in the respective fields.
&REGUH-STRAS(C)& / &REGUH-ORT01& / &REGUH-PSTLZ& / &LV_REGIO(C)&
Regards,

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

PSE11 and 12 will NOT display a JPG i open..... this just occured- have no idea why - please help??

PSE11 and 12 will NOT display a JPG i open..... this just occured- have no idea why - please help??

All JPEGs or a particular one?

F1 and screen painter not display in IE 7.0

F1 and screen painter not display in IE 7.0
my CRM infomation
basis 610 sp 39
kernel 640_ex2
my notebook
window XP sp2
Internet Explorer 7.0
SAP GUI 640 patch 31
SAP GUI 710 patch 7
I try GUI 640 and GUI 710
but sap help and screen painter not display
I aleady apply vbscript http://support.microsoft.com/default.aspx/kb/556050
how can i solve the problem ?
Edited by: Lee Jun Seok on May 21, 2008 1:41 PM
Edited by: Lee Jun Seok on May 21, 2008 1:41 PM

Hi,
Yes, even I had lot of problems with IE7 finally i had to instal windows XP all over again with IE6. Please note that even if you downgrade from IE7 to IE6 without installing windows all over again you will still get problem. the best and only solution is to instal windows from scratch and please ensure that the CD that you have instals IE6 and not IE7 because the CD that I had installed IE7 with XP therefore I had to get another windows XP with IE6 and had to create recovery disk before so that I do not have to run around for drivers later.
Hope this helps
Regards,
Deepak

Error Plant in reference document and plant do not match

Hi,
I have a problem where in the a shopping created and been approved but the backend communication error shows " 06730 Plant in reference document and plant do not match". The user has used the plant before without having any problem. Please let me know if any root causes.
Thank you,
Manyam

Hello Manyam,
R/3 is raising this message because you are trying to create a PO or PR with a plant that does not match the item reference document.
Reference document can be for example a R/3 contract or a R/3 source list.
It is not possible to change the plant when creating a purchase order with regard to a contract.
Are you using R/3 contract reference in SRM shopping cart ? (maybe coming from catalog item ?)
Did you checked the SOS tab in SRM SC item, to see if the system assigned automatically a SOS (this is the case if only one R/3 SOS is found) ? But in this case, the plant is used as a filter so you could not have SOS from wrong plant.
Rgds
Christophe

Material num and Plant is not displaying in Output

Similar Messages

Maybe you are looking for