Material number as receiver file name in XI

hi experts,
here iam doing IDoc to file scenario, when i push data from BD10 the data will come to XI and i want that material number as file name.
can any one explains me how to do that dynamic configuration.
thanks in advance.
JOHN

hi john
make use of VARIABLE SUBSTITUTION
checkn this blog for reference
An interesting usage of Variable Substitution in XI
An interesting usage of Variable Substitution in XI
SAP NetWeaver XI: Variable Substitution with Adapter-Specific Message Attributes via DynamicConfigurationBean
SAP NetWeaver XI: Variable Substitution with Adapter-Specific Message Attributes via DynamicConfigurationBean
regards
kummari

Similar Messages

Sequence number/counter in File name using FTP

Hi
I have to add sequence number in the file name. How can i do that? everytime file generates it should pick up the latest file number.
Example File1 File2 File3. 1,2 and 3 are the sequnce number.
Regards

Hi ria,
You can do this by dynamic file creation. Use this following code and cretate an UDF. The map the required file format to the target header structure as below;
UDF
sequence number:
IDENTIFIER is the parameter
Import com.bp.xi.util.*;
Code:
return ServiceUtil.getSequenceValue( IDENTIFIER, container, false );
Dynamic file:
Key & Value is the parameter
Code:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get( StreamTransformationConstants.DYNAMIC_CONFIGURATION );
DynamicConfigurationKey confkey = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", Key );
conf.put( confkey, Value );
return "";
Input parameter "Key" is given a constant value"FileName"
Second parameter "Value" is the file pattern
Mapping
Constant(File)concat function sequence numberUDF ==> Dynami File udf ==>target header record.
In the receiver communication channel check the adapter specific function, filename
points if useful
regards,
Murugavel

Receiver file name with counter

While working on proxy to file scenario. I have to maintain receiver file name as ddmmyyyyxxx_nnn.xml,where xxx is constant and nnn is a counter which is suppose to be reset everyday.Anybody can help me on how to achive this...?

Hello Amit,
Yes. You can achieve this but only using File - NFS Protocol.
A new file is created for each document. The file name is extended with a counter, which is inserted before the file name extension (for example, default002.file). This selection is only available for the File System (NFS) transport protocol.
Make specifications for Counter Definition:
Prefix
Specify one or more characters that you want to add before the counter in the file name.
Format
Specify the first counter to be used. It must be a valid integer number. Leading zeros are permitted.
Step
Specify the counter increment.
Mode
Specify when the counter is to be added.
After First File
The counter is added when the file name is used unaltered for the first time.
Thanks
Pothana

Dynamic Receiver file name in AS2 adapter

Hi Experts,
How to get dynamic receiver file name in AS2 adapter. We need receiver file name same as of sender file name.
We tried selecting dynamic attributes file name but we are getting followin error in CC.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.seeburger.xi.connector.queue.TaskBuildException: Mandatory attribute dtAS2FileName is not present in XI message., Mandatory attribute dtAS2FileName is not present in XI message.
Thanks,
Hari

hi hari,
You can't do it manually. As both adapter are in different context.
You can go with UDF to slove ur problem.
Just extract the input file name using Dynamic configuration
Store that in some variable.
Use same name in the dynamic file name in AS2 receiver. Below code might be useful.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://seeburger.com/xi/common/dtAS2FileName", "DYNFILENAME");
conf.put(key,strfilename);
Thanks
Jai
Edited by: Jaideep Baid on Apr 9, 2010 9:16 AM

Setting up the File Name of email Attachment from Received File Name

Hello All,
I have to send the Received File in attachment to an Email if there is any exception. Here I can attach the file, but I cannot set the file name of attachment as the Received File Name. Is there anyway of doing this without using custom pipeline component.
Here I am using the Orchestration and SMTP Adapter.Any help is greatly appreciated.
Thanks

It might work if you use a custom pipeline component on your send port and in the Execute method populate the MIME.FileName property of the body part.
Something like:
public IBaseMessage Execute(IPipelineContext pc, IBaseMessage inmsg)
string filename = inmsg.Context.Read("ReceivedFileName", "http://schemas.microsoft.com/BizTalk/2003/file-properties");
inmsg.BodyPart.PartProperties.Write( "FileName", "http://schemas.microsoft.com/BizTalk/2003/mime-properties", "filename);
return inmsg;
You can take reference from similar post here
SMTP - Setting attachment filename
Anther good article with MIME is here
Setting attachment filename with the SMTP Adapter
For MIME case your SMTP message construct statement would be like below
multipartMessage.MessagePart_1= InMSG;
multipartMessage.MessagePart_2="This is message part2 as a string";
multipartMessage(SMTP.Subject) ="Email From Dynamic Port";
multipartMessage(SMTP.From) ="[email protected]";
multipartMessage(SMTP.SMTPHost) ="yoursmypserver.com";
multipartMessage.MessagePart_2(MIME.FileName) = "Attachment_Name";
multipartMessage(SMTP.SMTPAuthenticate) =0;
Thanks
Abhishek

Change in time stamp format in receiver file name

Hi,
We have a scenario as AS2 - PI - FTP Server (AS/400). We want target file name as BMMDDHHSS where B is constant and
MM (month e.g., 01), DD (day e.g., 12), HH (hour e.g.,11), SS (seconds e.g., 12). Is there standard way of doing this, just by changing some configuration in receiver file adpter?
Please let me know, how could we do this using PI. If script is optional, keeping as back-up only.
How come, naming dynamic receiver file names are so difficult in PI. I have been trying to get the answers for our another requirement like to name receiver file as C1.YYMMDD.C2 in a file pass through scenario for more than a month.
It is just file through scenarios, so we can't use variable substitution as we are not going to read content/payload of file
Thanks in advance,
- Riya Patil

Hi Shabarish
Thanks for your reply. I have trying to make this UDF work since almost a month with no luck. Can you please check where am I doing wrong?
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String SourceFileName = "C1." + a + ".C2";
conf.put(key, SourceFileName);
return " ";
In the above code, I am passing date as "a". And mapping CurrentDate (formatted) --> UDF --> Target root node.
I am getting the following error in SXMB_MONI:
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Lockbox_Filename_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_Lockbox_Filename_: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:Stack>
Your help would be much appreciated.
Thanks,
Riya Patil

Getting Receive File Name and status of application from Biztalk database.

Hello all,
I want to retrieve Receive file name and status of application (started, partially started) in a stored procedure
querying Biztalk databases.
Please share if anybody have an Idea.
Thanks

Hi Nilesh,
Status of BizTalk application can be obtained using ExplorerOM API provided by product. It's Application class has a Status property that returns one of Not Applicable, Started, Stopped, Partially Started.
using Microsoft.BizTalk.ExplorerOM;
private string GetApplicationStatus(string applicationName)
BtsCatalogExplorer catalog = new BtsCatalogExplorer();
string status = "";
try
//connection string to BizTalk management database
catalog.ConnectionString = "SERVER=.;DATABASE=BizTalkMgmtDb;Integrated Security=SSPI";
Microsoft.BizTalk.ExplorerOM.Application app = catalog.Applications[applicationName];
if (app == null)
throw new Exception(String.Format("Application '{0}' cannot be found.", applicationName));
status = app.Status.ToString();
catch (Exception ex)
//Handle exception
System.Diagnostics.EventLog.WriteEntry("MyMonitoryingApp", "Exception call stack: " + ex.ToString());
finally
if (catalog != null) { catalog.Dispose(); }
return status;
UPDATE: Found the thread from where I got this code. Thanks to Ashwin for providing it.
Refer:
Reg Stored Procedures for BizTalk Application Status in BizTalk Admin Console
Rachit
Please mark as answer or vote as helpful if my reply does

Configure receiver file name as Sender file name

Hi All,
In PI7.1. We have scenario(file to file). Here the sender system send multiple files and In the receiver system we need to populate the same filenames as Sender file Names.
Could you please let me know is there a configuration to have Receiver file schem name As like sender file names.
Thanks in Advance,
Naga.

Hi Naga,
This can be achieved using either variable substitution or Dynamic Configuration by enabling Adapter Specific Message Attributes in sender and receiver file channels.
If the sender file name and receiver file name needs to be exactly same then just check Adapter Specific Message Attributes in advanced tab of both sender and receiver channels. Check on File Name under that.
Lot of help over this is already available in sdn, kindly serach and you will get lot of helpful blogs and wikis
Regards,
Gautam Purohit
Edited by: Gautam Purohit on Apr 16, 2010 11:26 AM

Receiver File Name assign dynamically

Hi friends,
          In our scenario, receiver file name is assigned to dynamically. Example Inventory_Current date. Inventory is static, but CurrentDate is changed on runtime.
I was tried to Variable substitution method and UDF method. In this type dynamic value is mapped to target structure, so Receiver payload shows the dynamic value in output file. But we don't need that dynamic value. So, in variable substitution method and UDF method is not achived to my requirement.
       Please any one help me how to change file name at runtime (receiver communication channel). If using any module program pls forward to me.
Thanks & Regards
Vijay

Hi,
if we want to get the Output file name as One of the Field value from Payload and Current dase with it means,
1) Write one UDF & map Like this
      Name(giri)-----UDFCurrent Date----MT_Target
2) Check the ASMA Option in Receiver Adapter Aloneu2026..
3)No need to check the ASMA Option in the Sender side
UDF Code:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
String Outputfile = conf.put(key,a);
return Outputfile;
Regards
Seshagiri

How to give field name to Receiver File Name.

Hi ,
In my source target structure there is a field name
"job id" .
I need that value coming in that field name to be given to
Receiver File Name.
Thanks in Advance

Hi,
You could use the field name to the File Name. For that you could go ahead with variable substituiton in receiver communication channel.
In receiver Communication channel use variable substitution as
In file name -- %Var1%
In Variable substitution parameter give Var1 ---> payload:<field Name>
Refer
SAP Network Blog: An interesting usage of Variable Substitution in XI
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
variable substitution
http://help.sap.com/saphelp_nw2004s/helpdata/en/8e/464442c1a1c253e10000000a1550b0/content.htm
Also see the below links to use the dynamic variable substitution
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Also
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
Thanks
swarup

Receiver File Name Writting

Hi All,
I want to write the receiver file name like test20091216.txt
I tried with Add Timestamp, but it is adding with time also which i dont require.
Here i want to say is iam not using any mapping to use Dynamic file name concept.
Please suggest me on this.
REgards

>
Vamsi Krishna wrote:
> Sarvesh,
>
> iam not sure about the target FTP Server OS.
>
> i have one thought here, the process is as follows....
>
> ECC will generate a text file to XI Shared path, XI will pick up and deliver it to target FTP server path.
>
> Now this is doing with out any mapping, we can't do Dynamic Config. t=in this case.
>
> So my thought is i can ask ECC while writing the file with file name followed by date. EX: test20091216.txt
>
> so that in XI, can i just use the sender file name to receiver file name???
>
> REgards
Yes, if ECC can do this then problem solved. Just use ASMA setting in both sender and receiver adapter to write the same file name at receiver side.
There is ablog written by Michal, just search it..

Received File Name in Map

How to get the Received File Name(using FILE.ReceivedFileName property) in BizTalk Map. Kindly provide with suggestions.
Regards, Vivin.

try this
http://blogit.create.pt/blogs/tiagooliveira/archive/2009/02/02/Using-xpath-function-in-orchestrations.aspx
xpath(msgOut,"string(xpathquery)")=msgIn(FILE.ReceivedFileName)
You can't promote that field which occurs multiple times so in that case we use xpath()
Regards

Same Sender and Receiver File Name. Pls advice urgent

Hi All,
My sender file name is auto generated number so
it is dynamic in nature.
ex. "abc1.txt"
     "abc2.txt"
Now In my Sender File Adapter I cannot give
File Name hard coded as my sender file name is auto generated number.
Also I want same file name received at receving end.
File Sender --   "abc1.txt"
File Receiver -- "abc1.txt"
File Sender --   "abc2.txt"
File Receiver -- "abc2.txt"
Pls advice.
Regards

Hi Rider,
All your sender files have .txt extension but the name is not constant(dynamic in nature).Than in this case to pick ur file u can use the *.txt as ur sender file name.Than all the files with .txt extension in the source folder specified would be picked.
Than u can proceed in the same way given in this blog
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Please let me know if u need any information
Thanks,
Bhargav
Note:Award points if found useful

Receiver file name should contain the same plant value as sender filename

Hi All,
I have a requirement in PI 7.0 and the scenario is synchronous which is as follows:
- XI will read a flat file which has the naming convention Plant_100.txt where 100 is the plant number , after reading the file XI will trigger standard BAPI call to ECC system.
- ECC system will return an response message back to XI , XI need to need write this message in to a log file and the file name should be Plant_100_logs.txt.
- Here plant value 100 is neither passed to ECC system nor this value will be returend back from ECC system . So , is there anyway where we can make sure that plant value can be added to the log file without using an BPM in between ??
Regards
Vinay P.

Hi,
Using Dynamic configuration in Message mapping you can read the source file name and creta the target file name as same as source file.
For BAPI call in Mapping you can use RFC lookup.
So crete a scenario FILE to log FILE
In mapping using RFC lookup make a BAPI call.
And use dynamic configuration to set the file name.
Refer this
http://www.****************/Tips/XI/ASMA/Index.htm

Dynamic receiver file name C1.yyMMdd.C2

PI Experts,
Is it so difficult to acheive in SAP PI? I hope I made the requirement clear.
Scenario: Sender AS2 adapter --> PI --> Receiver File (NFS) Adapter. Just a file pass through, no mapping
Requirement: Irrespective of sender adapter in a file pass through scenatio where we wont read the file (payload just contains the flat file), I want to delivery the same file with the naming convention C1.yyMMdd.C2 where C1, C2 are constants and yyMMdd is cuurent date. So sum up, need to have current date in a file name on receiver side with out reading the payload.
1) Variable substituation works on if we are are receiving the variable value from the payload.
2) Looks like ASMP works only same filename from a sender to a receiver file adapter, because if you are not using sender adapter or using sender adapter without selecting ASMP - File Name, there no way you can receive DynamicConfiguration under SOAP Header. Please correct me if I am worng.
3) Running the OS command after file processing to re-name the file, may be its the last resort, but I would expect and would like to do in PI.
What is the best possible solution?
- Riya Patil

Hi Shabarish
Please find below the my UDF code:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String SourceFileName = "C1." + a + ".C2";
String TargetFileName = SourceFileName;
conf.put(key, TargetFileName);
return TargetFileName;
And mapping trace:
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 54, 45, 53(:main:, row:1, col:3) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:187) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:174) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:118) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor1102.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy182.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor12384.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:254) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 54, 45, 53(:main:, row:1, col:3) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:157) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) Root Cause: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 54, 45, 53(:main:, row:1, col:3)(:main:, row=1, col=3) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 54, 45, 53(:main:, row:1, col:3) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2787) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2832) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) -
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 54, 45, 53(:main:, row:1, col:3) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2787) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2832) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) ... 4 more</Trace>
<Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_Lockbox_Filename_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 54, 45, 53(:main:, row:1, col:3)</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_Lockbox_Filename_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 54, 45, 53(:main:, row:1, col:3) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor1102.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy182.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor12384.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:254) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 54, 45, 53(:main:, row:1, col:3) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:187) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:174) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:118) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor1102.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy182.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor12384.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:254) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 54, 45, 53(:main:, row:1, col:3) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:157) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) Root Cause: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 54, 45, 53(:main:, row:1, col:3)(:main:, row=1, col=3) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 54, 45, 53(:main:, row:1, col:3) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2787) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2832) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) -
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 54, 45, 53(:main:, row:1, col:3) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2787) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2832) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) ... 4 more</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
Thanks for helping me on this.
- Riya Patil

Material number as receiver file name in XI

Similar Messages

Maybe you are looking for