Material Number mandatory for PR exceptP for Service Purchase Requisition

Hi All,
     Our client's new requirement is we need to give material number mandatory for Purchase Requisition. But it should not affect for Service Purchase Requisition (as we don't have material number with material type DIEN. Till now, we were using Acc Assignment Category K and Item Category D with only Short Text description). We have separate document type for Service Purchase Requisition(ZSRV).
    In order to make Material number mandatory, in PR, we need to give in "Define Screen Layout  at Document Level for PR",right? Is there any way to give, "Material Number Mandatory at Document Type Level"?
Please suggest.
Regards,
rosh

hi sridhar,
  Thank you for your answer. So as you said, there is no possibility to make material number as mandatory at DOCUMENT TYPE level through Customzining, right?
Regards,
Rosh

Similar Messages

  • To fill in the material number with item category u201CBu201D for Framework Order.

    The use of framework orders (also referred to as blanket purchase orders)  enables you to procure a variety of materials or services from a vendor up to a predefined maximum value (the value limit).
    Instead of a specific delivery date, you specify a validity period for the order.
    Goods receipts or the entry and acceptance of services performed are not necessary in the case of a framework PO and limit items.
    The invoices are posted directly with reference to the purchase order, provided that the specified value limit is not exceeded. When the value limit of the PO is reached, or the validity period is exceeded, the system issues a warning message. It is possible to book the invoices, but these are blocked for payment.
    During the phase of service performance, the cumulative u201Cactual" values (for the services actually performed) are continually updated in the underlying purchase. This enables you to monitor the progress of a procurement project on an ongoing basis. By comparing the "actual" value with the total value, you can always obtain an overview of the degree to which a budget for unplanned services or materials has been exhausted (i.e. see whether predefined limits have been reached or nearly reached).
    So with the Framework Order type (FO) and item category u201CBu201D you get the error that it is not allowed to fill in the material number with item category u201CBu201D.
    Please suggest me the possible solution to fill in the material number with item category u201CBu201D for Framework Order.
    Best Regards,
    Harisha

    The Framework order type is specialy defined for lesser value procurements (ex: stationeries, cleaning services ....) which are all not worthy to create Material Master at all.
    If you are very sure to fill the Material number, then proceed with some other document type.
    In what circumstances you want to put material number in FO order?
    Karthi.

  • Material number is blank in FBL3N for doc type SA

    Hi,
    If posting is coming from SD or MM module, the material number is reflected in FBL3N for GL acct "Material price variance".  But when the posting is coming from FI, the material field is blank. 
    But in another company code, when  postings are from FI, the material field is correctly populated.  
    I have already checked and verified that BSEG-MATNR was defined as a special field.  I have also ran RFPOSXEXTEND and BALVBUFDEL but the material field from FI posting is still blank.
    The FI posting involves filling up the material or product number in the profitability segment amongst other fields and then system will do a derivation.
    Can someone point me to the right direction on how to get the material field populated by an FI posting?
    Thanks and regards,
    Thess

    Hi,
    The material field should appear in FBL3N for all types of postings, provided it got populated.  Can you please check, whether material field  is getting populated in BSEG table for that document # ?  If the material is not getting derived, then it won't appear in the report.
    Best Regards,
    Madhu

  • How to de-activate Qty and Price fields for Service purchase requisition

    Dear all,
    We have a request to de-activate (leave it as "Display") the fields of quantity and gross price when changing a service purchase requisition of a specific document type.
    In example: We want that purchase requisition type NB, allows in change mode (ME52 or ME52N) to change the quantity and gross price of the services. On the other hand, these two fields must be only visible for order type ZNB. Besides this must be happening only for services.
    Changing PT9 or PT9B will affect also the creation, and if we only configure based on transacction and document type does not work.
    Any help will be highly appreciatted.
    Cheers

    Hi,
    You may have to write a output requirement routine and assign the same to the output type in NACE.
    But i don't think you will get the old and new data of Purchase order in requirement routine (program : SAPLV61B).  You may have to export the data into memory from either a BADI method or User exit and then import the same in requirement routine.
    Regards
    Vinod

  • Service Purchase Requisitions not being transferred

    Dear Experts,
    I'm not able to transfer the service purchase requisitions with service master but it is working fine for standard purchase requisitions with material master in SRM 7.0 using report bbp_exttransfer_req. Also how to address different purchasing organization and purchase groups with different company codes and plants, as the transferred PR is being defaulted by the channel values in the srm organizational structure. For Service purchase requisitions I'm receiving error as " Define Transaction type for local system" in the srm system and in ecc it is as ANOENTRY.
    Note : Apart from using BBP_DOC_CHANGE BADI looking for a standard way of meeting this requirment.
    Thanks and Regards,
    Venkata Koppisetti.

    Hi
    Follwoing is what I can think in your scenario:
    1. Check if the service master is replcated from ECC to SRM, if at all you have service master in your ECC PR.
    2. Maintian all the Org. structre elements of ECC(PUR org, Pur grp and Co.Code) of ECC in SRM using transaction PPOCA_BBP. This will take care the same Pur. Group you have on PR of ECC will also moved into SRM documents(RFx or SC sent to SOCO).
    3. Since your syaing you are getting an error for define transaction type, check in the attribute "Define transaction"  has been mainiantiend.
    with regards
    Manjunath

  • Create a Service Purchase Requisition using BAPI_PR_CREATE

    Hi Everyone,
    I am using BAPI_PR_CREATE.
    I am able to create Standard Purchase requisition.
    But while creating Service Purchase Requisition, i am not able to create.
    I am getting no errors for the PR Item, but even after entering Services for the PR Item i am getting error message in return table of bapi "Please Maintain Services or limits'.
    Do i have to pass value to Package_No field in the item level table of BAPI_PR_CREATE.
    Please help.
    Regards,
    Akash

    Hi,
    Check this link for creation of services.
    Bapi_pr_change in services
    PO Upload through BAPI_PO_CREATE1 - Problem in Service Item
    BAPI_PO_CREATE1 Error
    Hope it helps
    Sujay

  • Converting Service Purchase requisition to Purchase order

    Hi,
    In our scenario the service requsitions are generating from Project order (PS module). We have to give multiple purchase orders against this service purchase requisition. System is not allowing to do so.
    Viv

    Hi,
    ***As you creates purchase orders in ME21N  WRT Purchase requisitions
    ***Use t.code:ME5A & execute by entering u201CProcessing status u2013 B u201Cin dynamic selection--> Purchase requisition.
    ***As you needed restrict PO creation with more than PR Quantity and set error message follow path: 
    SPRO->Materials Management->Purchasing->Environment Data-->Define Attributes of System Messages
    06 076 as Error messages.
    when all the PR quantity already converts to PO, system will not allow to create a another PO from that same PR again.
    Regards,
    Biju K

  • Making old material number mandatory for mm02

    hi,
       how to make  old material number(mara-bismt) mandatory for mm02 transaction.
    regards

    Hi,
    You can do the validation using enhancement "MGA00001", component "EXIT_SAPLMGMU_001".
    Regards
    Vinod

  • Material number mandatory (field selection) based on acc. ***. category

    Hy Folks,
    i am looking for a solution to define the Material Number as a mandatory field if the Account Assignment Category "Q" is used in a Purchase Order Item. Field Selection of Account ASsignment category Q is not sufficient as the material number is not included.
    Any ideas for a solution in SAP standard customizing? (sure, user exit will be possible...)
    THX!
    Gregor

    Hi dear,
    With settings in SPRO this is not possible you have to go for exits or BADI take help of ur ABAP er.

  • Service Number is not getting updated in the Purchase Requisition

    Hi All,
    When i create a Service PR using bapi BAPI_REQUISITION_CREATE FM , service details ( Service number, Qty, Gross price, ) are not getting updated in Service tab of Purchase requisition transaction. I am passing all the services related parameters in the FM.
    Please clarify this.
    Thanks for the help.
    Vinoth

    Hi Vinoth,
    Are you getting any error in the return table?Can you show your coding?
    Regards,
    ravi

  • Service purchase requisition/order with Material group optional

    Is it possible to create a purchase requisition/order with item category D (services) without entering any material group?
    We would like to enter only the G/L account but not the material group.

    Hi,
    It is not possible to create PR/PO without material / Service group & Item catagory D.
    Better create service groups like material group which will help you for reports also.
    Regards,
    Manish Jain

  • FM or BAPI for  date and time for the creation of a Purchase Requisition

    Hi people:
    Does anybody knows about a FM, BAPI or table in which i have de detail for the date and hour of the creation of a Purchase requisition?
    Points for helpfull answers.
    Thanks in advanced

    Hi,
    If you want to get the time along with the creation date then use the tables CDHDR and CDPOS, but be careful while passing the data need to pass the entire primary fields data else it will fail in the performance test.
    Reward points if useful.
    Regards,
    Suman

  • Problem in Calling URL for Line Item of Perticular Purchase Requisition.

    Hi Experts,
       I am calling a external window from the web dynpro which is working fine. I am trying to open transaction ME53 in the browser and i am successful in that. But now when i open that transaction there were two requirements:
    *1) It should open the purchase requisition directly bypassing the initial screen {which is completed while posting this query}*
    *2) and it should open the purchase requisition according to the specific line item. eg. for PR 1234569 Line Item 0010 should only be visible.
    Please help me out with this.
    Thanks in advance.
    Regards Saurabh Kerkar
    Edited by: saurabh s kerkar on Dec 20, 2010 12:45 PM

    Currently the URL is as follows:
    lv_url = 'http://p10dev.ril.com:8000/sap/bc/gui/sap/its/webgui?~TRANSACTION=ME53%20EBAN-BANFN='.
      concatenate  lv_url lv_banfn into lv_url.
      concatenate  lv_url '&~OKCODE=/00' into lv_url.
    this is opening transaction ME 53 skipping the initial screen with all the line item.
    i want to use it for specific line item how to do it?
    Edited by: saurabh s kerkar on Dec 21, 2010 8:23 AM

  • Mismatched data for "Created By" in generated Purchase Requisitions

    Hi,
    Just wanted to ask question to all gurus that, I see some mismatched data for ‘created by’ for system generated Purchase requisitions. As if I do MRP run using MD40(MPS scheduling run) then system is showing PR created by 'MRP controller' but if I run MRP using MD41(single item multi level), then system is showing the user ids name(the person on whose id MRP run is executed) is showing in the PR.
    As both the MRP runs being executed in the same user id, then there should not be such kind of diffrent data. Due to this mismathced data we are gettting some difficulties in the reporting. 
    Thanks in advance.
    Regards
    Amit

    Hi!
    It's solved. The mistake was on the connection of the tables:
    BUT000 - BUT020 - ADRC
    Thanks and regards,
    Mon

  • ME59N - Service Purchase Requisition..is it possible ?

    Dear friends,
    I'd like to know if is possible to create PO automatically via ME59N (job scheduled) from a purchase requisition with item category D-services.
    After to enter a sorce in the Purch.Requisition we are trying to create POs automatically to this service PR, same way we do this for materials.
    We got the error message saying that PR doesn't exist ...when we try that via ME59N , we only is allowed to create it via ME21N.
    best regards,
    Alessandro

    Hi,
    Yes, possible to create automatic Service PO from Service PR.You need to activate for  Service auto- PO,  Automatic Purchase order creation for Service requisitions in ML91. Create info record based on Material Group. For Automatic PO , info record is mandatory{ with other setting as material auto PO like example like  all setting we do  in material master & vendor master etc...).
    Also check OSS note 635511
    Regards,
    Biju K

Maybe you are looking for

  • Partitioning w/out Losing Data on External HDD

    Hello All, I have a WD My Studio External HDD of 500GB. It contains invaluable data, however I need to temporarily create a bootable partition. The main goal is NOT to lose any data. Is this feasible through Disk Utility? Many thanks!

  • Infix to postfix expression

    Hi all! I'm currently trying to finish up an assignment that is due in a few hours. Here's my delimma, according to the text book and the professor the following algorithm to convert an infix to postfix is as follows: 1. Two stacks will be used in th

  • No Audio problem with HP Pavilion dv6

    I have an HP Pavilion dv6 Notebook PC running on Windows 7 Home Premium. It is a 64-bit Operationg System. Recently I noticed I lost audio from my speakers and I have no idea what has caused it. I tried testing the speakers and I recieved a message r

  • Netweaver Mobile 7.2

    Would anyone have indications of when/if Netweaver Mobile 7.2 would be released ?

  • Apps stop working

    I've had some problems with apps randomly stopping working.  My kindle app is one that often does.  I'll reboot the tablet and try again.  I get the message that the app has stopped working.  I've looked for updates to the app and I've even removed u