Material on idoc
hi experts,
can any body provide me gud material on idocs.......
i am new to idoc...
Hi Shyam,
Please look into the following links
http://searchsap.techtarget.com/sDefinition/0,,sid21_gci852485,00.html
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/ale,IDOC&
Suggest you also look into help.sap.com to get more information
Thanks
Janani
award points if helpful
Similar Messages
-
Error while creatting the Material Master IDOC in ERP 2005
Hello All,
I am trying to create scenario from RFID-Enabled Outbound Processing - Conf Guide (SAP AII 4.0).
I am using Auto ID 4.0 on a NW04s system. The backend is a ERP2005 system.
The scenario requires that I need to create a material in the backend and send it to the NW04s system using IDOCs.
After completing the configuration on the backend, I tried sending the Material Master IDOC to Auto ID from the transaction AIDMM. I get a message that IDOC is just being created. But I could not find it in the transaction WE02.
On debugging I found that the function MARD_GENERIC_READ_MATNR_PLANT resulted in error.
Thanks for any kind of input.
Regards,
Rahul
Message was edited by:
Rahul GavandeDear,
Check ABAPer for file settings.
- CANNOT_SKIP_ATTRIBUTE_RECORD : The attributes could not be read in the EPS parcel. The file cannot be opened for reading, because it may have been deleted in the meantime.
- CANNOT_DETERMINE_EPS_PARCEL : The EPS parcel is not in the EPS Inbox, because it may have been deleted. You must download the relevant patch again (for example, Hot Package).
- CANNOT_DETERMINE_DATA_FILES : The name of a data file could not be determined, because a profile parameter was not correctly configured. Check the settings using the report RSPARAM.
- CANNOT_DISASSEMBLE_R_DATA_FILE : An R3trans data file could not be unpacked. A possible error source is that the relevant EPS parcel was not found. The data file could not be opened for writing. An error occurred when transmitting a 20K block from the EPS Inbox to the directory /usr/sap/trans/data (UNIX).
- CANNOT_DISASSEMBLE_D_DATA_FILE : An ADO data file could not be unpacked. The reasons are the same as with the message CANNOT_DISASSEMBLE_R_DATA_FILE .
- CANNOT_CREATE_COFILE : The cofile could not be created from the relevant data file. One possible error source is that <sys>adm does not have write authorization for the directory /usr/sap/trans/cofiles (UNIX).
Check Note: 70752.
Regards,
Syed Hussain. -
Help to Create a Generic Material from Idoc
Hi everyone, We have a problem to create a variant from Idoc, our problem is which segments to fill and how to do this?, For create an individual material is ok, we create a material from Idoc Artmas3 without any problem, but when we want to create a variant we had the following error
Message MH197
"No value assignment transferred for the variant-creating characteristic..."
Someone of you had created generic materrials? How do you fill the segments? Which Idoc do you use?,please help us
RegardsHi,
Initially create a view or identify the table to create generic extractions, remaining process is same in all data bases such as CRM........
GENERIC EXTARCTIONS:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/generic%2bextraction
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
Generic Delta:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Assign points if these are useful.
Rgs,
I.R.K -
Need to send BOM material in Idoc WMMBXY - WMMBID02
Hi All,
I have a requirement, the inbound GR gets posted into SAP from third party system, here they will send the BOM details with the main material. Pls let me know which segment the BOM value can be passed? so that the GR gets posted with BOM components.
Pls note, If I send the main material from Idoc the component are picked from SAP and the GR posted with BOm components. My requirement is, If the BOM qty changes the will send the BOM and new qtys. I need to post the GR with the new BOM qty.
Thanks in Advance.Hi Pavithra,
How to Guide for sending mails:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0964d7c-e66e-2910-24bb-ac535e4a5992
Use StrictXML2PlainBean in the module processor to convert the data to CSV:
/people/pooja.pandey/blog/2009/02/23/xml-to-text-conversion-made-easy-by-strictxml2plainbean
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/748d595dab6fb5e10000000a155369/content.htm
Regards,
Aravind -
Pls send material for idocs in ECC 6.0
Pls send material for idocs in ECC6.0
Hi sitaram s ,
IDoc
- IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
A large enterprise's networked computing environment is likely to connect many geographically distributed computers to the main database. These computers are likely to use different hardware and/or operating system platforms. An IDoc encapsulates data so that it can be exchanged between different systems without conversion from one format to another.
IDoc types define different categories of data, such as purchase orders or invoices, which may then be broken down into more specific categories called message types. Greater specificity means that an IDoc type is capable of storing only the data required for a particular transaction, which increases efficiency and decreases resource demands.
An IDoc can be generated at any point in a transaction process. For example, during a shipping transaction process, an IDoc may be generated that includes the data fields required to print a shipping manifest. After a user performs an SAP transaction, one or more IDocs are generated in the sending database and passed to the ALE communication layer. The communication layer performs a Remote Function Call (RFC), using the port definition and RFC destination specified by the customer model. The IDoc is transmitted to the receiver, which may be an R/3, R/2, or some external system.
Archiving Processed IDocs
IDoc archiving is a two-step process:
1. Archive the IDoc.
2. After that another job will be generated. You can see in your SARA for your trigger to delete those archived IDocs.
Have a look at transaction WE47, set "Archiving - Possible" for all statuses to be archived. Use transaction SARA with object IDoc to archive. If the above is set then all IDocs are archived the same way.
Transaction SARA works in the following way:
On the main screen enter IDoc as the object. Click on Customising -> Technical settings. This shows the logical filename (configured via transaction FILE & SF01) that will be used to get a filename when writing the archive files. It also shows the document type (that links to an archive via transaction 0AC0) or the archive, depending on SAP version. You can also set the size of the archive files and whether the deletion and storage jobs should execute automatically or not.
On the main screen there are, amongst others, buttons for ARCHIVE, DELETE and MANAGEMENT. When you click on ARCHIVE you will go to a screen where you can create variants, and set the parameters for the archiving job. The EXECUTE button will schedule this job. If the "start automatic" tic for the deletion program was not set in customising, you will need to go to the DELETE button on the main screen to schedule the deletion jobs, after the archive job has finished. This schedules a job per archive file. In MANAGEMENT you will be able to see the statuses of each archive run.
SAP Integration Using ALE(Application Linking and Enabling)
- IDOCS -
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
Updating IDoc data in segments,Changing a control record of an IDoc,Getting IDocs linked to Application documents,
Displaying and IDoc in a report,Read IDoc from Database,Creating and sending an IDoc,Update IDoc status on the database
ALE Inbound Pre-Processing
http://www.erpgenie.com/sapedi/idoc_abap.htm
cheers!
gyanaraj
reward points if u find this helpful -
Upload material using idoc in lsmw
hi ,
i m trying to upload material using idoc inbound processing in lsmw. but whnever i m giving partner name as lsmw & port name as lsmw (even i tried with different name also ). it gives error like port does not exits.
regards,
swapnilHi ,
Please foloow Link:[Check|http://****************/Tutorials/LSMW/IDocMethod/IDocMethod1.htm]
Regrads
Jana -
Material Master IDOC MATMAS05 and unit of measure
Hi
We are using SAP standard material master IDOC type MATMAS05 to trigger IDOC. Our material master is having base unit of measure as "G". We are not using ISO unit of measurement. But Material master IDOC, segment E1MARM is populating base unit of meaurement (MEINS) as "GRM".
Any idea why IDOC is picking ISO unit of measurement instead of material master base unit of measurement.
Any idea how to send base unit of measurememt as "G" instead of "GRM" in DOC segment.
Thanks
NileshThats the way it works. In any interfacie to or from external sys. , it uses the ISO code from CUNI instead of the UOM .
-
Error while sending Material Master IDOC to Auto ID 2.1
Hello All,
I am using Auto ID 2.1 with SP1 on NW04.
Integration server is XI 3.0 with corresponding XI Content for Auto ID.
The backend is ERP2004.
I am using the config guide for Auto ID 2.1.
After completing the configuration, I tried sending the Material Master IDOC to Auto ID.
IDOC gets created successfully. XI says the message transfer is successfully.
In the log of Auto ID. I am getting the following error while importing the Material Master product:
Product ID AUTOIDAII_MAT has an invalid format
Internal error in /AIN/DM_PROD_COMMIT
Message no. COM_PRODUCT897
The description says that it may be a program error.
Or the program expects some variable to be filled which has not occured.
Any idea what could be the error. Or where should I try looking for to get more detail info.
Do some one knows what should be the patch levels for the different components in all three servers for Auto ID 2.1 SP1.
Thanks for any kind of input.
Regards,
Arundeep SinghHI Arundeep,
use the following
1) XI 3.0 SP level 12
2) AII 2.1 SP2
3) check in rfid outbound configuration guide for any customising for product to be done in AII
regards,
ashit singh -
MATERIAL ON IDOC,ALE AND EDI
hi,
IF U HAVE ANY MATERIAL ON IDOC,ALE AND EDI PLZ SEND TO MY MAIL ID([email protected]) OR GIVE ANY SITE ADDRESS?hi,
for ALE/IDOC
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
For ALE -- IDoc's
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
ALE/ IDOC/EDI
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
http://www.sapgenie.com/ale/why_ale.htm
http://www.sapdevelopment.co.uk/training
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
for EDI
check these links.....
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.onestopsap.com/interview-Question/ale/
http://www.onestopsap.com/interview-Question/edi/
http://www.allsaplinks.com/idoc_sample.html
http://www.sap-img.com/abap/ale-bapi.htm
http://www.sap-img.com/basis/difference-between-edi-and-idoc.htm
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
Please check this link for EDI/ALE/IDoc online documentation.
http://www.easymarketplace.de/online-pdfs.php
good link
http://myweb.dal.ca/hchinni/sap/idocs/IDoc%20Cookbook%20for%20EDI%20and%20Interfaces.doc
If you need further info shoot me a test mail to [email protected]
Regards,
GNK -
im trying to transfer material with dimensions not maintained,
gross weight , net weight , volume is initial, that means filled with 0,000 , and so weight unit is initial. But when i transfer material , the idoc created containes weighted unit as KG.
I want to know how this KG is filled, where can i see in customization to see KG is set as default.Hi Bharat,
All the 3 requirements can be processed by the same Idoc type message type WMMBXY & extension WMMBID02. The field BWART differs.
Hope this helps
Regards
Raju -
Updating Cnfigurable Material through IDOC to AFS material master
Hi Guru's,
Well i am trying to create a afs material through IDOC, i created all the views in the afs material master using /AFS/MATMAS type in WE19 and i got the result as well all the master data views came. But the thing is i am not able to pass the configurabile material in MRP3. As of , SDN or OSS note is saying that it is not possible to do that.
I hope there will be some possiblities to get done it. It will be greatfull if any one provide the information about it.
Thanks and Regards,
Madhu.GHi Gurus,
Well my previous question about the creating configurable material through IDOC.?
At last we find the solution for that, as in SAP OSS note says there is nopossibility in some way and also said that STD PD field was added wrongly in /AFS/MATMAS05.
But the ultimate solution is we need to add a segment in the IDOC which contains the characteriastics will be updated automatically and add up the segment E1CUCFG.
Here is the solution:
*add up the segment E1CUCFG
Thanks & Regards,
Madhu.G
Edited by: madhu333mac on Aug 25, 2011 1:07 AM -
Post material master idoc with class and characteristic values
Hi,
I need to post the class and characterstic values of material while posting the material using idoc of basic type matmas05 . Can anyone suggest me the fields and segment details to fill the class, class type and characteristic values in matmas05.
Note : the class and characteristic values are already created in the system, my purpose is to assign them to material while creating. so please give me the field and segment details in idoc basic type matmas05.
thanks
KiranI try to do the samething. I see the fields E1CUVAL : CU: Characteristic valuation in the structure of MATMAS05 but when I run the IDOC, these fields never appear even they exist for the material.
Did you find an answer to your question that can help me? -
Hi,
i want to create a MAterial master idoc, whenever a material is created ( it should happen automatically).
1. is it calling BD10 transaction in user exit for building IDOC
2. Can it be done through Change pointers even in the case of Creatin gthe material.
CheersHi Kumar,
i have done change pointers method for a ztable,not used for standard table,but i can share the configurations which i did in my case.
1>we81
2>we31
3>we30
4>we82
5>bd61
6>scdo
7>bd52
8>bd51
9>bd60
10>we20
11>bd64
basically in ur case u have to create an object in SCDO,check the field matnr,go to dataelement and in further characteristics tabb u will find one chek box ,as its standard it will be check for zdataelement u need to check it.
i have created one function module and wrote the logic for generating an idoc.
chek all the tcodes .
regards,
Nagaraj -
How can i change the Material by IDOC
Hello.
I have a question in change Material by IDOC. I config the output bound & input bound in 2 system.And create a program to distribute Material using
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
MASTER_IDOC_CONTROL = G_IDOC_CTL
OBJ_TYPE = ''
CHNUM = ''
TABLES COMMUNICATION_IDOC_CONTROL = GI_RET_CTL
MASTER_IDOC_DATA = GI_IDOC_DATA
i fill the GI_IDOC_DATA with material detail.
At first I create a new material.It's ok. But i change samething detail and excute the program again. I can not change the material.......the result status of Output bound and Input bound is both OK.
Please help ...thanks.No one can help me?? I am been puzzled for several days...Who had solve things like this can discuss about me in here.
Best Regards -
Error while sending Material Master IDOC to Auto ID
Hello All,
I am using Auto ID 4.0 on NW04s.
The backend is ERP2005.
I am trying scenario from RFID-Enabled Outbound Processing - Conf Guide (SAP AII 4.0)
After completing the configuration on the backend, I tried sending the Material Master IDOC to Auto ID.
I get a message that IDOC is just being created. I could not find it in the transaction WE02.
Also, they are not appearing in the AII system.
Thanks for any kind of input.
Regards,
Message was edited by:
Rahul GavandeHi Rahul,
I have not worked on these version of products. And I don't know what changes have been done in the new versions.
But still, can you let me know, what is the exact configuration that you have done and also
which partner are you trying to send the IDOC. And if you are trying to send the IDOC then I will suggest to debug the transaction and see till what level it proceeds.
Best of luck,
Arundeep
Maybe you are looking for
-
Seems to have been covered elsewhere, but not quite the same issue. Updated to latest verison of Snow Leopard on my MacBook Pro and Mac Pro in preparation for installing Lion. Installed Lion on MBP which all went perfectly and been using it for a wee
-
I cannot create an Apple ID username or manage my Apple ID account
Hi! I'm lucky to be able to ask these questions at all: I'm using my father's apple ID at the moment. I tried to ask a question (concerning another problem I'm having) using my own account, but I get stuck in some sort of strange loop: I have to choo
-
I recently updated my MacBook Pro to the new software, and now my iMessage and my FaceTime are not connected with my phone number like it is supposed to be. How do I get them to match so that I would be able to use my cellphone number on my notebook?
-
I would like to give my switch-statement a string, but that does not seem to work, is it possible in any way? public void test(String str) { switch(str){ case "Green":{ System.out.println("The color is green");} case "Blue":{
-
We are using 2012r2 RDS session hosts, with Group policy mapped printers.. and some people have getting errors when trying to print a test page sporadically. It seems like all of the printers are brand specific occurring to our Canon Printers. We ar