Material once issued thru' PM order,Should not be Deleted From The PM Order

Dear all,
IN PM ORDER, ONCE MATERIAL IS ISSUED THROUGH IT, SYSTEM ALLOWS TO DELETE MATERIAL. THIS SHOULD NOT
HAPPEN AS IT WOULD LEAD TO WRONG COST CALCULATION.
Order Status : gmps,cnf
can anybody give me solution to restrict the deletion of component in PM Order.
From
Vishal

Hi,
You cannot control this through Auth.
You can prevent this by assigning the message type for message number 750(cn) to "E= Error" through the config for message control.
Regards
Narasimhan

Similar Messages

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

After "Replace with clip" the original clip can not be deleted from the project - why?

After using "replace with clip" to replace clip A in the timeline with a new clip B , clip A can not be deleted from the project anymore.
If you try to delete clip A, you get a warning, that it still has references in one or more sequences.
If you continue and delete clip A, it seems to be deleted - at first!
Unfortunately if you save and reopen the project, clip A is restored to folder "Recovered clips".
It's not possible to really delete it.
I also did not find a way to unlink clip B from A .
The only thing you can do, is to revert the change by "Restore Unrendered" in the clip context menu. But that's obviously not helping
I dont know if this is a bug or a feature. I understand, that it can be useful to undo the "replace clip" function, but why would anyone not want to be able to delete the original clip at all?
help how to fix this problem is greatly appreciated!
I use Premiere Pro CC 2014.2 (Win7 64bit)

I'm sure it has nothing to to with other sequences.
You can easily reproduce this behaviour:
1. create a new project
2. import 2 clips and name them "A" and "B"
3. put "A" in the timeline
4. ALT-drag "B" over "A" in the timeline (or right-click "A" in the timeline while selecting "B" in the project files and select "replace with clip ... from bin")
5. delete "A" from the project files
6. save and close project
7. reopen project
=> "A" reappears in "Recovered clips" and can not be deleted.

Sytem should not allow to save the sales order based on risk category

Hi,
My user want to control the creation of sales orders based on risk category in credit control area.
We created a new risk category - 30 Not authorized.
And we made necessary configs also , like assignment of risk category and company code in OVFL.
We assigned 30 risk category in FD32 for customers also.
But while creation of sales order system is allowing to save the order.
My user requirement system shoud not allow to save the sales orders for those are customers belongs to 30 risk category.
How can we config. this
thanks
Sateesh

hi,
dont want to save the sales order if the credit limit exist ?
then maintain block in OVA8
choose
your credit control area risk categories credit group
1000 30 Not authorized 01
checks tab
choose static and maintain B
this will give you error message and it will not allow you to save the sales order
regards
senya
Edited by: senya_1111 on Oct 1, 2009 2:26 PM

My messages are not being deleted from the server

Hi,
Mail is not removing messages from the server. Every now and than I have to remove messages from my server manually. I went through all the settings ... it works as intended on 2 out of 3 machines ... am I missing something? I can use "delete now" in Mail preferences ... not a big deal, just a nuisance.
Thanks, Stephan

Are the Mail settings sticking between reboots on that one Mac?

Good Issue date in the Sales order should 1 day difference from the MBDAT

For the particular customer, i want to have difference of 1 day in between the material availability date & good issue date in the schedule line. As per standard i can't made any changes in route and shipping point. Suppose material availability date in sales order is 22.09.2010 than my good issue date should be 23.09.2010 in the sales order. Any body having any idea how can we handle this case and what are things we need consider impact of this change.
Regards,
Srinivas.

Hi,
I think you can easily enable this in Route scheduling /Delivery scheduling. You have to maintain the load time and pick/pack time as the total of 8hours. If this is done, then after material availability date, one more day will be added and the final day will be considered as GI date.
If you dont want to do this, you only have to enable this by Z by using a user exit where you can add one day to the MBDAT and update that in GI date.

Conditions Tab should not be displayed in the sales order.

Dear Gurus,
My client wants to hide the conditions tab (header & item) in the sales order while in display mode.
Because his dealers should be in a position to see the pricing strucutre.
Pl guide me how to do this with transaction variant.
Thanks & Regards,
Sreehari

You can create a transaction variant for VA03 and hide the tabs using SHD0. You can also assign it to a separate transaction code if it meets your requirements.

Admin Console should not be accessible from the Internet

Hi!
I am using WebLogic 6.1 and by default the Admin Console runs under the same port
like the deployed web applications. As a matter of fact, the Admin Console can
been seen from the Internet! :(
Is there a way to start the Admin Console with another port? Or is there any other
solution that the Admin Console is only accessible from the Intranet but not from
the Internet??
I couldn't find anything in the documentation related to this topic.
Thanks in advance.
Markus Richter

One solution I use is to place an Apache WebServer in front of the BEA HTTP server and use the Apache/WebLogic module to proxy requests.
Apache is much more configurable, robust etc etc as a webserver. If you configure a specific Apache Virtual Server for connections to your Weblogic server you can use Apache ACL's to control access to the console via specific IP addresses only.
The ACL in the Apache Virtual Server configuration could like something like this.
<Location /console/>
order deny,allow
deny from all
allow from 10.0.0.1
</Location>
hope this helps.
Mark P

Purchase Req Should not be created if the order is Delivery blocked

Hello All,
I have a requirement in third party sales where the Purchase requistion should not be created if the sales order is delivery Blocked, as and when the delivery block is removed then only the PR should be created.
Please help to fulfill the requirement
Regards
kiran

Hi,
Please check the field purchase req with delivery scheduling in scheduling line configuration.
thanks
Kuntla

When I delete emails in gmail, the emails should not get deleted in thunderbird. Please advise. Thank you.

Thank you for taking out time to help. I have thousands of emails in gmail which I keep on deleting. I have configured thunderbird for this email account and it is sunchronized and upto date. If I delete the emails in gmail now, I do not want them to get disappeared from thunderbird. Basically, whatever the emails I delete in gmail and it's trash should not be deleted from thunderbird. Please advise on what steps should be taken. Thanking you once again.

'''If you have a IMAP mail account:'''
You are remotely viewing the folders and emails on the server.
You subscribe to see folders. but this only downloads emailsheaders and downloads the emails upon selection to a temp cache for viewig. They are not stored in your profile.
If you also synchronise then a copy of the server folder is downloaded and stored in the Thunderbird Profile, but synchronised folders keep synchronising so that the server and TB folders are the same.
IT does not matter whether you delete emails via Thunderbird or webmail, you are deleting from the same folders. So, if you delete off server and then discover it has been deleted from Thunderbird, everything is working perfectly.

Profile Imanges are not getting deleted from Profile Image library

Hi,
If I go mysite and edit my profile and set a profile images and save the changes. Image is uploaded to profile Image library in the root of the mysite.
I Edit my profile again and this time I remove the profile image and save the changes. Image is not getting deleted from the profile Image library.
as per my understanding it should get deleted. My site clean job is running. user profile is active in AD.
Thanks
Omkar

My first question would be is it a big deal if the picture doesnt get deleted from the libarary? My understanding is that the profile picture field is a URL link, the first time you add a picture it will provision 3 copies of differing sizes to the
library. When you "remove" the picture, it just empties out the picture URL field. Which is a nice hidden recovery if someone accidently deletes a profile photo they really wanted (Or if your company really locks down picutures so you only get
a choice of a couple avatars instead of a personal photo).
Similar issue:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17bc8538-568f-4fff-8933-458fdba4b701/delete-user-profile-picture-in-sharepoint-2010-when-account-is-deactivated-or-deleted-from-ad?forum=sharepointadminprevious
and response:
Since the user photo library follows certain standards OOB:
http://iedaddy.com/2010/12/sharepoint-2010photo-management-for-social-mysites/
I would say just create a small script that will periodically read the UPS and make sure there are no photos sitting in the library not associated to an account... here's an example of accessing the User Profiles w/ Powershell:http://iedaddy.com/2010/06/sharepoint-2010-updating-user-profile-properties-with-powershell/
You would just modify it to delete image files whose name is not associated to an existing NTName in the UPS.
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

My deleted emails on iPhone 4s are not being deleted from server

I'm facing a problem with my iPhone 4s when deleting emails. Unfortunately, they are not being deleted from the server. I tried setting the account in pop and imap with settings to delete from server and trash ticked. Still they keep on appearing in Outlook which is a double work to do. Please advise.

I'm no expert by far, but have had issues with this before.
IMAP should allow your iPhone to remove messages from the server.
But have you made sure both the iPhone and Outlook are connecting via IMAP?
If your iPhone does remove the messages from the server, but your computer is using POP, then the computer may download the email before it is removed form the server by your iPhone.
This was my issue, that my computer had already downloaded the message, and POP does not check later if it is deleted.
If you delete a message from Outlook does it disappear on the iPhone?
Alternativly you may need to check the email server settings.
Who is your email provider?
They may be able to check if IMAP allows you to remove emails.

File not deleted from the folder

Hi All,
Im executing file to idoc scenario.
my file processing mode is "delete" . But the file is not getting deleted from the folder but im getting success message in moni..
other communication channels which are using the same ftp parameters are executing fine ( i.e files are getting deleted and success msg in moni ).
the following is the error msg that i found in communication channel monitoring ...
Failed to delete file 'IF416AQ1n.dat' after processing. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 421 Timeout (120 seconds): closing control connection.'. For details, contact your FTP server vendor.
please help me in this issue..
deepu.

Hi all,
Thanks for your replies..
Im using a file of size 230744 bytes of type dat.
time out: 600
poll interval: 300
retry interval : 120
i communication chanell monitering i can see the following message ..
Failed to delete file 'IF416AQ1.dat' after processing. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 421 Timeout (120 seconds): closing control connection.'. For details, contact your FTP server vendor
file is not getting deleted.. what are the changes that i need to make ???

Duplicate entry is not deleted from the TCA tables

Hi
We are using Oracle Customer Online to find the duplicate data and Oracle Data Librarian to remove the duplicacy. The request to remove the duplicates is taken up by ODL and the task is performed. When checked from OCO it shows that the duplicate entry has been erased but when checked in the TCA table HZ_PARITES, the entry is still there. Can anyone please help regarding this as why this is so... after removing the duplicate entry why is it still there in the table or if the entry is still there then why cant you access it through OCO
Regards
Sourav Biswas

Hi,
Did you check the value for "STATUS" column in HZ_PARTIES table for the deleted records? It must be "D" which reperesents "Deleted". See the "REGISTRY_STATUS" AR lookup which validates the Party Statuses.
When duplicates are eliminated using Data Librarian/Party Merge, the records are not actually deleted from the database, instead the party status will be changed to "D". This must be the reason for not being able to see the records from Customers Online.
I guess, the same case might have occurred to your entries.
Wishes,
RK Goud

Mails are not getting deleted from server

Hi
I am reading a mail from using java mail from my mail server.
When i am setting the message.setFlag(Flag.DETELED,true);
the mail is not getting deleted from the server.
I am not able to trace the problem, please help me solving this problem. It's a bit urgent.
store = session.getStore("pop3");
store.connect(hName, portNo, uName, pWord);
folder = store.getFolder("INBOX");
folder.open(Folder.READ_WRITE);
Message message[] = folder.getMessages();
System.out.println("Unread Msg Count : " + folder.getUnreadMessageCount());
int n = message.length;
for (int i = 0; i < n; i++) {
fromMsg = (message.getFrom()[0]).toString();
subMsg = (message[i].getSubject()).toString();
if (folder instanceof POP3Folder) {
POP3Folder pf = (POP3Folder) folder;
Part messagePart = message[i];
content = messagePart.getContent();
if (content instanceof Multipart)
messagePart = ((Multipart) content).getBodyPart(0);
String contentType = messagePart.getContentType();
Part messagePart = message[i];
content = messagePart.getContent();
if (content instanceof Multipart){
messagePart = ((Multipart) content).getBodyPart(0);
String contentType = messagePart.getContentType();
message[i].setFlag(Flag.DELETED, true);
store.close();
Thanks and Regards,
Luv Amieee...
xx

yeah true...
i did not close the folder.
i got to know from sun faq only later on yesterday.
but still.. thanks a lot...
luv amieee..
xx

Material once issued thru' PM order,Should not be Deleted From The PM Order

Similar Messages

Maybe you are looking for