Material Prices extraction problem

Hi Experts,
I need to extract the data of the material prices not only the present and previous but all the history data of the Material Prices, so i used the datasource 0CO_PC_ACT_05. The Problem is that when i check the PSA table i see only the last 2 months records i.e(Fiscal Year 11.2007 and 12.2007) and the no of records i am getting is nearly 2 lakhs. Then i checked the datasource 0CO_PC_ACT_05 in the R/3 system with RSA3 and got the same values. But i think this datasource 0CO_PC_ACT_05 extracts the data from the table MBEWH or MBEW and these tables have nearly 35 lakhs records. So Please can anyone help me to extract the all history data of the material prices, am i using the wrong datasource? Is there any problem with the extractor if so how can i solve it? There is no restriction in extracting the data.
Please help me to solve this problem its very urgent.
Thanking you
Regards
Mrudul.

This is the process:
1.      Go to transaction code RSA3 and see if any data is available related
to your DataSource. If data is there in RSA3 then go to transaction code
LBWG (Delete Setup data) and delete the data by entering the application
name.
2.      Go to transaction SBIW --> Settings for Application Specific
Datasource --> Logistics --> Managing extract structures --> Initialization
--> Filling the Setup table --> Application specific setup of statistical
data --> perform setup (relevant application)
3.      In OLI*** (for example OLI7BW for Statistical setup for old
documents : Orders) give the name of the run and execute. Now all the
available records from R/3 will be loaded to setup tables.
4.      Go to transaction RSA3 and check the data.
5.      Go to transaction LBWE and make sure the update mode for the
corresponding DataSource is serialized V3 update.
6.      Go to BW system and create infopackage and under the update tab
select the initialize delta process. And schedule the package. Now all the
data available in the setup tables are now loaded into the data target.
7.      Now for the delta records go to LBWE in R/3 and change the update
mode for the corresponding DataSource to Direct/Queue delta. By doing this
record will bypass SM13 and directly go to RSA7. Go to transaction code RSA7
there you can see green light # Once the new records are added immediately
you can see the record in RSA7.
8.      Go to BW system and create a new infopackage for delta loads. Double
click on new infopackage. Under update tab you can see the delta update
radio button.
9.      Now you can go to your data target and see the delta record.
Assign points if useful.
Regards
Gajendra

Similar Messages

Any data source to extract material price or Standard cost history

Hi All,
Currently we are using data source 0CO_PC_ACT_05 for material price extraction.
But it seems this will only extract current period, previous period and previous year last period.
But my requirement is to extract the material price history for any old periods.
Do we have any table from where we can extract this details? or any standard data source through which we can extract this details?
Thanks,
Muruganand.K

Hi
Check MBEWH (Material Valuation: History)
Thanks
Kalyan

Extracting PIR (material prices) Data into BW

Hi Experts,
I am working on a BI Integrated Planning project. Product cost will be calculated in CO-PC. During cost roll-up system can pick material prices from any of 5 fields i.e. Standard price, Future Price and Planned price 1,2,3. I have a requirement to update the current material prices from purchase info records to one of the planned prices fields.
My initial solution was as follows:
1. To rely on the users to download the PIR or contract prices into Excel
2. Apply % uplift to the prices in Excel
3. Then use an ABAP to update the uplifted prices to the material master future or planned price fields.
However my client is not happy with this solution.
Another option I am looking at is:
1. Extract the prices from the PIR's into BW and then download to Excel s
2. Apply % uplift to the prices in Excel
3. Then use an ABAP to update uplifted prices to the material master future or planned price fields.
Is this feasible? If yes, how can I get the prices into BW.
Thanks in advance,
Milind

Hi,
Pls chk this link could help you:
http://help.sap.com/bp_biv335/BI_EN/html/BW/ManufactAnal.htm
Regards
CSM Reddy

Peculiar problem with Material price change in previous period

Hi All,
We have changed the material price in previous period using MR21. Ideally it should update MBEWH table only but it had updated MBEW table as well. The posting had been done on 4th Sep for the month of August.
Price carry over check box is not checked in the configuration for this company code.
Please help me out why it is happening for current period.

Dear,
Not to answer and solve your issue, but what I get information wish to inform you as:
MBWEH shows data only in those periods where there are material movements for this material.
And there is no automatic copy of all the MBEW data to MBEWH while performing MM period opening.
There is no program available to populate data in MBEWH, nor is it required.
You can searh for the last relevant data available in MBEWH if the period you search is not available. Hope this solves your problem.
Also check out the documentation for field MBEW-VMKUM (ie. data element VMKUM) in SE11 - it contains a decent description with examples.
Please let us know the solution other than this you get.
Regards,
Syed Hussain.

Material price is not coming in PO print out

Hi
I am facing a problem for a cost cenetr PO material price is not coming in print preview as welll as in print out for a particular PO what can be the problem.
regards,
zafar

Solution in this link Print priview of Purchase Order

How to Calculate Freight and Acquisition Overheads on Material Price

Hi Gurus,
currently i am working in Product costing. my requirement is to calculate Freight and Acquisition overheads on Material Price.i have maintaind rates for condition types ZFRA , ZA2H and ZAOH by using MEK1 transaction code. eventhough system is not calculating this overheads while running CK11n. system showing only material price no other oveheads.
my intension is to estimate the cost for Purchased parts not for Manufacturted parts. for that i have given the priority in the Valuation Variant is Price from purchase record.
can anybody resolve my problem?
Thanks&Regards
Prasad

Hi
Thanks for your reply.According to my clients requirement i need to do material cost estimates for purchased materials thru ck11n.for this i have given priority as price from purchase info record in the Valuation Variant. my mm friends maintaind price in the purchase info record ME11.
In additions to this i also maintained rates for Freight,Acquisition and Customs condition types in MKE1.
Now if i run CK11n, system showing only Material Price which is in the Purchase inforecord but system not calculating any required overheads.
I need to calculate Overheads thru Condition types not thru Costing sheet.
If you see Price Simulation system calculating the Overheads accordingly.but same is not getting populating while running the CK11n.
In Valuation Variant under the Deivery Costs tab I have assign all required Condition types to Valuation Variants and Controlling area accordingly.
I hope that i explained my current problem clearly.can anybody give me the solution
Thanks&Regards
Prareddy

NMCOL Report material price

First at all, Happy new year!
Please, my question is about the report NMCOL, it seems that the material price showed is correct for
every material consumption, but divided by 100. For example, in mm03 (acounting view) the variable price is 60
for a material and the report shows 0.60. What do I need to configure in order to adecuate the report?
I figure it could be something about the currency used or something like that....
I've found a method IF_EX_ISH_MM_MAT_PRICE~DETERM_MATPRICE in which I thought I could modify the
price using the example class but it didn´t work.
Thanks in advance.
All the best in 2012.
ISH 6.0 Release 604 SAPK-60414INISH

Thanks Christos, price in NMATV was right. This was a problem with a previous client, even in my actual proyect the price in table and in NMCOL is right. The unique difference I can see, these was a different country but the same apparently SAP standard version.
Best regards.

Material Price Analysis-CKM3N

Dear Gurus,
I'm new in material ledger and need advise for material price analysis in CKM3N.
There is a value from receipt from next level 13,282,838.
where cause value change 1,383,641 and new price change 365,125.
How to analyse this casue of single and multilevel price different could happen and what report can explain this different.
Thank you,
IS

Hi Iwan.
+ CKMLQS is the way to analize the price diff from lower levels. In your screenshot the pride diff come from 0414 F3PCS ( the same header material), thats why i ask if you have rework process.
+ Strategy 20 in the standard is a non-valuated sales order stock process, and its easy to verify because in CKM3N you dont write the Sales Order.
I never see a proyect with non-val sales order stock because SAP recomendation:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/90/ba6cfb446711d189420000e829fbbd/content.htm
In the same page, also check the constrains of non-val sales order stock.
+ Also check this old thread, UDO say ML dont work with NonValuated sales order stock (UDO work in ML development).
Material Ledger Functionality with Non Valuated Sales Order Stock
As i told you, i i couldn't give you an accurate opinion without see your system, but i guess the problem is the non valuated sales order stock.
Question:
+ You are in a productive system or in a test system ?
+ Who decide to work with strategy 20? PP boys ?
Arturo.

Pr price and Material price("Urgent")

Dear MM experts
Here in our plant, earlier we purchased one material from the foreign vendor with a price of 12000.00 INR each.
Now the same material is avilabe in Indian with a price of 150.00 INR earch.
My problem is:
When Im trying to create a PR, im getting the message
" PR rate cannot be less than material rate, material rate 12000.00, Pr rate is 150"
So how can I over come this problem, please suggest me any configuration is required.
For the same problem when I tried to create a pr in IDES version, It is allowing me to create pr lesser than the previous purchase.
Thanks in advance,

Hi Mr.Ranganath,
Accountin view 1 in MM02 transaction, is in non ediatable form, we cannot change the price in that field.
And as I told, In Ides version it is allowing to enter the price which is lower than that of the material price.
thanks for your response,
regards,
Govardhan,V.

Volatile raw material price and actual costing

Hello,
We are investigating the use of material ledger / actual costing in SAP. We have multiple production plants and multiple distribution warehouses that would be modeled as a plant.
We are worried that due to the extreme volatility of our raw material prices and the fact that some of our products have low volume or slow turnover in some warehouses, our cost of goods sold in SAP using material ledger / actual costing will be difficult to explain and not reflective of actual conditions.
For example, if a product is placed in Warehouse A in month 1, receives very little new product in months 2-4, and then we sell a lot of that product from warehouse A in month 4, the cost of those goods will be very close to the month 1 cost. We are worried about how that will affect our cost of goods sold.
We would like to hear from other companies that have similar conditions to see if this really causes any problems using actual costing / material ledger.
Thanks,
Jimmy

Hello,
Thank you for your response. We would like to understand why other companies do not have a problem with this behavior. Our company is concerned that this will reduce visibility of raw material price fluctuations in COGS (and reports that use COGS data), and make it more difficult to explain COGS behavior. Note that we have some reports on COGS data by material.
In our current system, COGS consumes inventory at the average price accross all warehouses.
Thanks,
Jimmy

Error:C+ 131 (Error message) material price will be negative

Dear Team,
While cancellation of GRN document system is showing the message like C+ 131 (Error message) material price will be negative.
As per the analysis the concern Po was belongs to 2008 the material price was 85 MAP.Gooda receipt completed on 22.04.2010.The qty of the gr document is 51.
Now we are unable to cancel the GRN document systemis showing the error message like the above mentioned.
Note: My MAP price 11 rs.I need to know howthe system is reduced this level.where i can see that.Kindly advice to proceed further.
Priority is high for us.Your replay is most valuable for us.Thanks for the consideration
Regards,
Suma Nalluri
Edited by: SUMA NALLURI on Apr 24, 2010 2:09 PM

Hi,
could you explain how solve this problem?
Thanks
Beste

How to Load Historical values from Material Prices

Hi
I have to load historical values from Material Prices.
I'm using extractors 0CO_PC_ACT_02 and 0CO_PC_ACT_05.
Do you know how I can do this in a easy way?
Help is appreciated.
thanks in advance.
best regards

Hi Joao,
This extractor0CO_PC_ACT_05 takes the data from table MBEW. ( data for the current period, previous period and last period of the previous year )
If material ledger is active, then it takes the information from table ckmlhd for those materials.
It does not look like fetching from MBEWH.
Please validate my above comments with sample extraction for a material and plant.
If that is the case, I would suggest you have to create a custom extractor based on MBEWH to get the historic price data and with 0CO_PC_ACT_05 you can get the prices for the previous period as they get completed .
0CO_PC_ACT_02 gets you the inventory value and not the price in the same way.
You might have to think about 0CO_PC_ACT_06 and 0CO_PC_ACT_07, if you have project stock and sales order stock in your business scenario.
Please let me know, how this goes.
Thanks,
Krishnan.

Returns after material price change

Hi,
Ive posted a goods issue for material A and the posting was valuated at material master price (standard price 50). Ive posted the invoice and the payment. Afterwards I did a material revaluation (new standard price 75). A month later the customer returned the goods and I created a sales order return and posted the goods receipt. The problem was that the goods receipt posting was valuated at the material master price (75) and not with the sales order costing (50). I need that the returns process has the same behavior as the goods issue reversal, i.e, the system should into consideration the original values and not the actual material price.
Can someone please help me?
Regards
MR

hi Miguel Reis
You have a good point about sales return, first let me tell you if you are creating sales return with reference to original billing or sales order all the billing entries will exact reverse posting of the original one.
But if i understood your question correctly what you want is the exact reversal of COGS A/c Dr to Inventory A/c Cr and with the same original value. This is not possible and not correct for following reasons
1.Because you have revalued your inventory and now your stock should will be valueated at latest price.
2. and your price control is "S" which itself siginifies that you want to have that mateial at the latest standard price.
I think it is more over a concept issue you need to understand from accounting point of view. In case you have any further doubt please let me know.
Regards
Message was edited by:
Mahesh Kore

Getting a material Price change in a certain period

Hi everyone,
I would like to seek your help regarding a problem I have in MM module. I am not an MM person but I need something that came from MM module.
What I need is the price change of a material in a certain period. Is there any FM that I can use to do this? I need it to compute the ratio how a component material affects the price change of the header BOM material. So if we check the FI document posted for the header BOM material price change, explodes it and check if the components of that material had also undergone a price change in that period. So how will I check the price change done on that component material?
Thank you.

Hi,
I need to compute ratio so I need the price change. In the report, you need to drilldown first to see the document.
thank you.

Material price change information

Hi,
Is there any table which provides the material price change information in company code currency and group currency value? I need to findout list of materials which has price discrepencies. I can use MBEW and CKMLCR but the problem is some materials doesn't have the cost estimates and CMLCR is not much usefull in this scenario
I really appreciate your input.
Thanks
Reddy
Edited by: beri reddy on Jan 27, 2011 9:38 PM

Hi Beri Reddy,
You can check with the below:
"S_ALR_87013182- Transaction History for a Material". You will be able find the Standard and Actual Price, MM Material Price Change, Price change by rleasing of new standard price, ML Settlement, etc.
"S_ALR_87013181- Material Ledger Data Overal Several Periods". You will be able find the Standard Price, Actual Price, Price Varinace absolute, Price variance %.
You try with Query using tables (CDHDR & CDPOS) or Z development.
The logic for the development:
CDHDR-OBJECTCLAS = MATERIAL
CDHDR-OBJECTID (Material No)
There are other fields like User id, date and time, t-code, etc.
By passing the above details pick CHANGENR from the same table CDHDR.
And pass the above value in table CDPOS-CHANGENR
CUKY
New value
Old value
You have mentioned that "some materials doesn't have the cost estimates".
Are these materials are RM, SFG & FG?
Are these materials are part of BOM or not?
If my understanding is correct that few of materials which has price discrepencies, to analyze these type of issues the better to use the below t-codes:
-CKMTOPPRICEDIF - Materials with Largest Moving Price Difference
-CKMTOPSTOCKVAL - Materials with Highest Inventory Value
Let me know if you need more details.
Thanks & Regards,
ADI

Material Prices extraction problem

Similar Messages

Maybe you are looking for