Material qantity
hi every body
can anybody help me? from which table i can get
opening stock/qty,
JW Cons. Qty,
JW Waste. Qty,
IH Waste. Qty,
Receipt Qty,
Issue Qty,
Mat. Trans Qty,
Mat. Cons Qty,
Jobwork Qty,
Others Qty,
Closing Stock Qty,
Net_Wt ,
Wunit ,
Production Qty ,
Sam. Prod. Qty ,
Sal. Trans Qty ,
Sales Dom Qty ,
Sales RTD Qty ,
Sales EXP Qty,
plz plz help me its very urgent.
thank you.
hi all,
There is one formula to calculate Average quantity of total stock.
beginning stock + n stock at month´s end
n + 1
and consignment stock for total stock.
For this formula I need beginning stock and stock at month end .
from which table i can get value for this two stock.
thank you
Similar Messages
-
Account determination Error during material posting
hi
when i try to post the stock through MB1C, it shows an error that Account determination for omb1 (company Code)GBP_BSA not possible.
please help me out and where i exactly i missed the configuaration
thanksHi Friend,
Goto Transaction code OMS2 and click on the Qantity update for your plant and material combination.
This will help
regards,
santosh -
Question about material reservation
Here is my scenario:
Initially there are 100 kg stock for material A,then I created reservation of material A for 10kg with movement type 201, then in md04 ,there is a row with reservation number 20276 for 10kg,then I use migo to good receive for it 2kg,now current stock is 98 kg which is correct,then I changed reservation from 10 kg to 8kg, then I looked it in md04 again, now reservation quantity changed to 6 kg,I am wondering why it isn't 8 kg instead, because I had issued 2 kg before? Even that When I go to mb23, requirement quantity is 8 kg and qantity withdrawn is 2kg, can anyone explain that?Hi,
What you written is absolutely correct.
first you created reservation for 10kg that time the requirement qty was 10kg.
then you changed it to 8kg so it will show 8kg as requirement even if you withdrawn all 8kg.
because there is 3 measurements in your reservation list details:
1.Requirement Qnty 2.Difference Qnty 3.Removed Qnty
In your case, after changed reservation, Requirement Qty - 8kg
Difference Qty - 6kg
Removed Qty - 2kg -
What are the mandatory fields while creation of material master in differen
what are the mandatory fields while creation of material master in different views?
Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram -
Refresh/Update data in a materialized view
Hi,
I have question about the data in a materialized view and how it is refreshed. My mat view has all my dimension-ids and my (for my specialize needs) aggregated measures from my fact table. I used the mat view wizard to create my view - which works perfectly. But now I wonder if I have to create some sort of mapping(?) or some sort of trigger to refresh the data in the mat view. Or is the data automatically refreshed when I start my fact table mappings. I use OWB 11gR2
thxMVs have properties for refresh - you an refresh based on schedules or when dependent data is committed or manually.
Cheers
David -
Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
JeetuHi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier. -
Material Number is not in table PLPO
Gurus,
I need to pull Material Production standard Time (Setup, Labor and Machine time) data from table PLPO into BW, however i do not see the field MATNR(Material) in this table. There is material group and BOM though. In this scenario, what are my options to identify/map these fields to MATNR in the DSO or Cube. Btw, theDSO/Cube has MATNR infoobject ZMATERIAL. Thanks in advance.Hi,
Check out the thread -
Re: Activity Value in PLPO table
Regards,
Geeta -
Report listing Material and Open PO Qty
Hello,
Is there a standard report that can give me the following?
Material | Open PO Qty
This would be specified for a particular purchasing organization, they are just looking for what is currently on order amongst all of their materials and they do not want to see the purchase order # in the report...just a total of what is on order. Any help would be greatly appreciated. I have tried looking into transaction ME2M but unfortunately WE101 scope of list isn't a selectable option for us.
Thank you,
AndyThank you for the responses. I solved this by going into transaction ME80FN, specifying a specific purchasing organization and all purchase orders over a fixed period for document date (I used the beginning of this year to today). I then execute this, select the "Delivery Schedule" layout and export this into Excel. Subtract Quantity Delivered from the Scheduled Quantity via a PivotTable, and this can give me a list of open PO's for a specific material.
Not the easiest way to find the information, but it does work using a standard report. For more consistent reporting ABAP development would probably be recommended. -
Report for material with sloc,qty available, and production order
hi friends, i need advice on getting this report for material with qty and specific sloc with the corresponding Prodn order numbers. in mb51 i could get all these details except the prodn order no. could you advice me please?
to make sure you know how to do this.
In the material document list, hit "Ctrl+F8" on your keyboard.
A window will pop up. Click on the button position and look for "order" in the list of available fields. That should do it.
Rgds. -
Report for Comparison of Material Qty
Hi All,
I need to Develop an Interactive report for Comparison of Material Qty. ordered through Purchase requisition, ordered material through PO and corresponding Material Receipt report.
Can Someone Give a brief description about this & fields tcode & tables regarding this report.A sample code would be much appreciated.
Thanks & regards,
Ravi STo get the material number combined with the PO text you will need the help of an ABAP programmer. The programmer can create a report for you using the function module READ_TEXT in the function group STXD. The tables to use are:
STXH - STXD SAPscript text file header
STXL - STXD SAPscript text file lines
The selection screen should have at least the following:
OBJECT - STXH-TDOBJECT
NAME - STXH-TDNAME
LANGUAGE - STXH-TDSPRAS
TEXTID - STXH-TDID
You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header. For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST. You can use this program to get long text in lots of places like information records, purchase order texts, etc.
Hope this helps. -
Report for Material at subcontract AND PO number
We are preparing for Inventory verification at subcontractors.
My boss believes it would be easier for the SC vendor if we could supply the PO number for which the material was shipped.
I haven't found such a report. Is there one?
If you know the tables and links, I can write a ABAP query
Thank you for any help that can be provided.
AltheaHi,
ME2O works fine if you want to track which subcontracting PO's are still open and what is the current stock at vendor.
ME2ON is another version of the same basic ME2O report.
Try also MBLB - Stocks at subcontractor.
As far as PO to 541 link is concerned, I do not think it is possible to find it unless there is some specific business process being followed which is supported by custom code.
The reason is that when you issue against 541, you are simply providing materials to vendor that the vendor needs.
There might be multiple open SC POs for same material/batch and there is no point in tracking against a particluar PO. Its the same material/batch the vendor receives.
When you post a PGR for a SC PO, then the stock from vendor premises is consumed by 543 and the track to your SC PO is maintained.
I tried maintaining EBELN as required in OMJJ for 541 but still no MSEG-EBELN is populated. Maybe I am missing something. -
Report for Req Material and Issue Material for Project/WBS
Dear All,
My client need a report for a WBS element-wise material required and material issue with value.
Let me know if any standard report avialble for same??
Or Incase of devlopment which are the tables we can use to Get req qty and issue qty of materials?
Thanks and Regards,
Atul R. RajmaneDear Shirkant,
Thanks for your input. I am using CN52N report.
I this I have selected Req Qty, Qty Received, Qty Withdrawn, Shortfall Qty. I am getting figures in Req Qty, Qty Withdrawn, Shortfall Qty but I am not able to get Qty Received figure. Let me know how I can get it i.e. for this any Note is required or any other configuration??
If I can get this figure than I can use this report for requirement.
Thanks and Regards,
Atul R. Rajmane -
Hi,
I need to search the material X for wich in field 'follow-up material' of material master data, I inserted the code Y.
Is there a transaction , standard report or search help in mm03 that can help me?
Regrds
Sabrina PaoliniHi,
It can be searched with SE16 => MARC => filed to select NFMAT it might help you...
Regards,
Ninad Kshirsagar -
Material Transaction Open Interface Error
Hi,
I'm getting following Error in Cost Manager after running the Transaction Open Interface,
Interface work well to update the stocks, but it returns error Layer Cost Worker Concurrent.
Error1
Bills of Material: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
CMCLCW module: Layer Cost Worker
Current system time is 10-OCT-2012 14:16:32
debug_level = 0
CM_EXTENDED_DEBUG = 2
CSTPLCIN.COST_INV_TXN:CSTPLVCP.interorg (160): ORA-00001: unique constraint (INV.MTL_CST_TXN_COST_DETAILS_U1) violated
Failing Transaction ID is 28227
Start of log messages from FND_FILE
Standard costing org : -1
Interorg transfer send org: (consume layers) ...
84:5
28227:1
Entering get_layers_consumed for transaction 28227 and a required quantity of 2 with a consumption mode of NORMAL
Trying custom layers
There are 0 custom layers
General consumption
Using SQL SELECT inv_layer_id,layer_quantity FROM cst_inv_layers WHERE layer_id = :i AND inv_layer_id <> :j AND NVL(transaction_source_id,-2) <> :k AND layer_quantity > 0 ORDER BY creation_date, inv_layer_id with 1,-1,-1
End of log messages from FND_FILE
No completion options were requested.
Output is not being printed because:
The print option has been disabled for this report.
Deleting output file.
Concurrent request completed
Current system time is 10-OCT-2012 14:16:32
Error2
Bills of Material: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
CMCLCW module: Layer Cost Worker
Current system time is 10-OCT-2012 14:16:32
debug_level = 0
CM_EXTENDED_DEBUG = 2
CSTPLCIN.COST_INV_TXN:CSTPACDP.insert_account (10) ORA-01400: cannot insert NULL into ("INV"."MTL_TRANSACTION_ACCOUNTS"."BASE_TRANSACTION_VALUE")
Failing Transaction ID is 28228
Start of log messages from FND_FILE
Standard costing org : -1
----------l_to_method---------
=5
Interorg transfer receiving org: (create layers) ...
90:5
28228:2
i_txn_id 28228
1 records updated in mclacd for 15005
1 records copied from mclacd for 15005
interorg_cost_txn(..)
transaction_id:28228
org_id:90
i_txn_org_id:90
i_txf_org_id:84
i_txf_txn_id:28227
i_exp_item:0
i_fob_point:0
l_snd_rcv:2
l_from_org:84
l_to_org:90
Sending org distributions
Receiving org distributions
l_intransit:0
Calling Inventory acct
In Inventory_accounts
In insert accounts
l_ussgl_tc :
Payable amount(l_value): acct: 414240
In insert accounts
l_ussgl_tc :
DS - others Exception, sqlcode = -1400
End of log messages from FND_FILE
No completion options were requested.
Output is not being printed because:
The print option has been disabled for this report.
Deleting output file.
Concurrent request completed
Current system time is 10-OCT-2012 14:16:32
My Coding
insert into mtl_transactions_interface
(transaction_type_id, --------------1
transaction_uom, --------------2
transaction_date, --------------3
organization_id, --------------4
transaction_quantity, --------------5
last_update_date, --------------6
last_updated_by, --------------7
creation_date, --------------8
created_by, --------------9
transaction_mode, --------------10
process_flag, --------------11
source_header_id, --------------12
source_line_id, --------------13
source_code, --------------14
transaction_header_id, --------------15
inventory_item_id, --------------16
transaction_interface_id, --------------17
subinventory_code, --------------18
distribution_account_id, --------------19
transaction_cost, --------------20
transaction_reference, --------------21
transfer_organization, --------------22
transfer_subinventory, --------------23
-- transfer_cost, --------------24
primary_quantity, --------------25
lock_flag,
transaction_action_id,
transaction_source_type_id,
dst_segment1,
dst_segment2,
dst_segment3,
dst_segment4,
dst_segment5,
dst_segment6)
values
(v_trx_type_id, --------------1 ------transaction type id
i.uom_code, --------------2 ------transaction_UoM
sysdate, i.creation_date, ------------3 ------trasnsaction date
i.from_organization_id, --------------4 ------org id
nvl(i.quantity_delivered, i.quantity), --------------5 ------quantity
sysdate, --------------6 ------Last update date
-1, --------------7 ------last updated by
sysdate, --------------8 ------creation date
-1, --------------9 ------creation by
3, --------------10 ------transactio mode
1, --------------11 ------process flag
1, --------------12 ------source_header_id
1, --------------13 ------source_line_id
i.mrn_trx_number, --'MRN Interface', --------------14 ------source code
'999999', --------------15 ------transaction header id
v_item_id, --------------16 ------inventory item id
xx_mrn_mtl_trx_int_seq.nextval, --------------17 ------transaction_interface_id
i.from_subinventory_code, --------------18 ------sub inventory
v_code_id, --------------19 ------code compbination
v_item_cost, --------------20 ------cost
'MRN Interface', --------------21 ------reference
i.organization_id, --------------22
i.to_subinventory_code, --------------23
-- (nvl(i.quantity_delivered, i.quantity) * v_item_cost) --------------24
nvl(i.quantity_delivered, i.quantity),
2,
v_trx_action_id,
v_trx_source_type_id,
'01',
'00',
'000',
'141013',
'000000',
'00000');
ThanksCan you get the following for the errored transaction?
SELECT transaction_id txnid, transfer_transaction_id txfrtxnid
, organization_id orgid, transfer_organization_id txfrorgid, subinventory_code subinv
, transfer_subinventory txfrsubinv, cost_group_id cgid
, transfer_cost_group_id txfrcgid , prior_costed_quantity
, transfer_prior_costed_quantity , rcv_transaction_id rcvtxnid
, transaction_action_id txnactid , transaction_source_type_id txnsrctypid
, transaction_type_id txntypid , costed_flag cstdflg
, transaction_group_id , inventory_item_id invitmid
, transaction_source_id wip_entity_id , transaction_cost txncst
, shipment_number shipnum , new_cost , prior_cost
, actual_cost , project_id , transaction_uom txnuom
, transaction_quantity txnqty , primary_quantity priqty , prior_costed_quantity priorqty
, currency_code altcurr , currency_conversion_rate currconvrt , currency_conversion_date currconvdt
, TO_CHAR (mmt.creation_date, 'dd-mm-yyyy hh24:mi:ss') creation_date
, TO_CHAR (mmt.last_update_date, 'dd-mm-yyyy hh24:mi:ss')last_upd_date
, ERROR_CODE errcode
, error_explanation errexpl
FROM mtl_material_transactions mmt
WHERE transaction_id IN (&Trx_Id) -- Error transaction_id
ORDER BY transaction_id DESC -
Material opening and closing stock for a given day- Tables or FM
Dear Friends
i have to make a report , related to Material opening and closing stock for a given day , i check the T-Code- MB5B ,
it is not giving correct date . is any functional module is available ? . i checked some table like mbew , mard . it is also not giving correct requirement . Please helpHi
Goto transaction MC.9, Give your Material and,Plant and the date which you need to know the closing stock. Do make sure that in the high and low values you are giving the same date there. I guess no such FM are available for this. You can refer the [Link|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=15856] for some help.
Regards
Vinodh
Edited by: Vinodh_AN on Dec 15, 2010 9:19 AM
Edited by: Vinodh_AN on Dec 15, 2010 9:25 AM
Maybe you are looking for
-
How can I transfer a back up file to an external drive?
I need to create space in my computer. But, I need to transfer a back up of my image to an external that is not my time capsule. How can I do this?
-
Hello all, I apologize if this topic has already been discussed, but I have a problem in IE when I click a URL that links to a pdf document. I have acrobat reader 8 installed, and I also have Adobe Acrobat installed on my PC. When I click links on we
-
Lion install listed in Finder Left pane Can't find it Don't know how to get rid of it
The Lion install app seems stuck in the left pane of my Finder app. I have searched for the location of this app and cannot find it. I also cannot get rid of it ... stuck there on my left hand screen. Clicking on it does nothing. Why is it there? How
-
Hello all, I tried a lot with the user exit EXIT_SAPLMEQR_001and EXIT_SAPMM06E_005 for me01 so the i can insert the material number and plant number to the ztable when ever i am making changes or creating source list for a material. Can any once tell
-
Can't install MacBook Air Flash Storage Firmware Update 1.1
My macbook air is mid 2012 And I just update the mac on Oct 15 And today I heard about the ssd failure thing. I head to appstore and find 0 updates there. Then I download the MacBook Air Flash Storage Firmware Update 1.1 here http://support.apple.com