Material Quantity Decimal Places

Dear Gurus,
Curreantly I am using MCF unit of measure and supplies are recorded in 3 decimal, but in one scenario supplies are maintain in four decimal, but system cant allow me to do that.
Can any one advise me that how should I can achieve the objective.
Regards

Hi,
If in future you want to control the decimal points, you can go to tcode: CUNI and find your UOM to set your prefer decimal points.
Thanks.

Similar Messages

BOM Component quantity decimal places

Hi... All..
how & where to maintain settings for decimal places for component quantity in a BOM..??
eg., Base unit of measure is KG n base quantity is 1KG
component quantity is o.5KG... at present system is not accepting decimal places....
waiting for reply,
with rgrds
L Narayana

Hi,
enter the no of decimal places in CUNI .
then , in CS02 - enter the qty as 0,05 and not as 0.05 (use comma instead of fullstop and it will not throw any error) pls check.
you can change this using this path also
in the SAP user menu System->User profile-> Own data in the Default value tab page you can find the decimal notation
The same topic was discussed earlier in this forum.
How to maintain BOM quantity in decimal (i.e.0.5 kg) instead of Round valu
Regards,
Sheik
Edited by: sheik abdulla on Apr 14, 2008 2:25 PM

Error at Quantity Decimal Places Updation

Hello Guyz
The scenario is when i am trying to update the decimal place of Quantity then at the time of update its showing the error i.e client is already Connected to Company and I have checked that no client is connected with the Company.
Thanks
Ankit

Hi,
Please check whether there is any instance or SQL process which is in sleeping mode. Even sleeping process can block the transaction of updating the decimal settings.
Also, please be aware that once the decimals are increased, it is irreversible. You cannot decrease the decimal places afterwards.
Kind Regards,
Jitin
SAP Business One Forum Team

Change of the quantity field to 5 decimal places in SAP

Hi Gurus,
The quantity field is appearing with 3 decimal places in BOM, Process Order, etc. Is it possible to make the decimal places to 5.
All the decimal digits from SAP are 3 digits. We have an interface through which the data flows from another legacy system (Fow system) to SAP. And the Fow system setting was 5 digits. The issue is some of the raw material requirement qty was really minor and it might be below the decimal 3 digits.
In that case, when the data flows to SAP from Fow system it will cause the material stage failure. so please help me to investigate how to let the SAP also could have the 5 digits decimal. Thanks.
Regards
Brijesh

Dear ,
Its SAP standard ,to put and use decimal places in BOM qty .You can use upto 3 decimal places in BOM qty.
At SE11 you need to see what measure field is linked to the quantity field.Then goto tranaction CUNI and chage the decimal places of the unit of measure for the qty field unit , it will not allow you more than 3 decimal places in case of BOM qty.
You have following choice :
1. With the access key make changes in the standard program and take help from ABAPer
SAPLCSDI, Table Name-RC29P, Field Name- MENGE.
2) Change the base quantity in BOM header to 1000 aand accordingly change the component quantity.
Hope this is clear
Regards
JH

Decimal place in Quantity field

Hello experts,
Got a query regarding decimal places in the quantity field of a sales order.
The material UOM is maintained as EA. I have checked the transaction CUNI, where the decimal place is maintained as ZERO. Still , Sales order / Delivery documents which i am creating is allowing decimal places for in the quantity.
For eg: material quantity of 50 EA in sales order, during the delivery batch splitting is getting splitted as 25.095 EA and 24.050 EA. Can you pleae advise the reason for this and how to go about this...
Thanks,
Safeer Rahman

Thanks for your reply....
But , as i have already told the decimal place field is maintained as 0(zero) in CUNI for the UOM EA.... Still its allowing me to enter decimal values... for eg:. its allowing me to enter 50.038 EA. I don't know why its not giving an error message prompting me not to enter decimal values...
Any idea?
Thanks,
Safeer Rahman

2 decimal places Quantity field in Sales Order

Hi expert
sales orders qty has two decimal points, which is not supposed to be the unit of measure is EA, and I have checked tcode CUNI its zero decimal places can anybody please help.
Thanks in anticipation of your response.

Hi,
You can control by attaching rounding profile attached in material master -> MRP1 view or at customer material info record. If it is not working, please check whether the below solution helps.
Restrict the Sales Order Quantity in Integer
Regards,
P Gomatheeswaran

Decimal places in quantity depending on currency

hi
i m doing an alv list display in which i need to display a quantity field with 3 decimal places for some currencies, but for one particular currency such as 'AED'
that field should display only 2 decimal places in the output.
regards
Zarina

Hi Zarina,
Populate decimals_out with 2 for this field while building the fieldcatalog.
g_t_fieldcat-decimals_out = 2.
Note: don't declare the field as currency which will overwrite above setting.
i.e., don't use g_t_fieldcat-cfieldname in this case.
==============================================
g_t_fieldcat-seltext_s = 'USD Equi'.
g_t_fieldcat-seltext_m = 'USD Equi'.
g_t_fieldcat-seltext_l = 'USD Equivalent'.
g_t_fieldcat-cfieldname = ' '.
<b>g_t_fieldcat-decimals_out = 2.</b>
g_t_fieldcat-just = 'R'.
modify g_t_fieldcat index zindx.
==============================================
Hope this helps you.
Regards,
Vicky
PS: Award points if helpful

Increase decimal places in the PO quantity and Price

Hi All,
Can the decimal places in the PO( ME21N) creation be increased more than 3 decimal places in quantity and price?
I did changes in UOM's in CUNI, I increased the decimal places upto 14 but still it does not take more than three i-e., 0.001 maximum.
Is there any other way to handle this?
Request inputs on this.
Note 569326 - ME9F: Customized decimal places are not taken into account........ found this OSS but this correction instruction is not for our pack level ECC 6.0
Best regards,
Sridhar

hi
In case if you are already working in production remember that decimal places should not change. It will affect all previous data.
For your problem best solution is make order unit as 1000. So that your problem will solve
e.g. instead of 2.009 inr for 1 Unit use 2009 inr for 1000 unit.

Change decimal places in PO quantity

Hi,
How can I set the number of decimal places in PO quantity?
Thanks so much!
Regards,
Paula

Dear Angela,
Is the decimal place in the GR quantiy also set here?
For example.. the uom % was set to 3 decimal places.. Will the GR qty also be 3 dec places?
Once you have set your decimal points in CUNI, it will be replicated in all your transactions.
Is the decimal place in the GR quantiy also set here? Yes
Regards
Utsav

Quantity column display upto 2 decimal places in ALV

I've created an ALV for dynamic columns. For this i've first created the fieldcatalog and then the internal table.
The problem that i'm facing in this is that the user wants the quantity column to be displayed upto 2 decimals. For this i tried the following:
1.)     wa_fldcat-decimals_o = '2'
         wa_fldcat-decimals    = '3'.
         wa_fldcat-datatype     = 'QUAN'.
with this i tried that let the calculation be to 3 decimal places but on output it should show 2 decimal places.
But this doesnot gets reflected on ALV. It still shows 3 decimal places.
eg: 3 decimal places: 16.667 + 16.667 + 66.667 = 100.001
2.)     wa_fldcat-decimals_o = '2'
         wa_fldcat-decimals    = '2'.
         wa_fldcat-datatype     = 'CURR'.
I also tried doing the calculation with 2 decimal places with datatype CURR but with this the last digit gets rounded.
eg: 2 decimal places: 16.67 + 16.67   + 66.67   = 100.01
Now we are taking total as 100 %. So tha calculative total cannot be more than 100.
On seeing 100.001 user says show it to me to 2 decimal places i.e. 100.00
On seeing 100.01 user says how can the total be more than 100 & this is .01 more than 100.
Therefore how can the 1.) option be achieved.
PLZ HELP!

Hi,
Can u check this one
DATA: gv_packed TYPE p DECIMALS 2.
CATCH SYSTEM-EXCEPTIONS conversion_errors = 6.
MOVE char_field TO gv_packed.
ENDCATCH.
IF sy-subrc = 6.
error handling
ENDIF
Try to move ur char field to a type p field. If char field is other than numeric then u will get error that can be handled in try...chatch..endtry block.
data: l_val type p decimals 2.
parameter my_val type char20.
try .
l_val = my_val.
catch cx_root.
Do ur error handling here
endtry.
you can work with search and concatenate.
value1 = 3601152
search value1 for '.' .
if sy-subrc eq 0.
concatenate value1(5) '.' value1(2)+5 into text.
Or value1 = value1 / 100.
endif.
Thanks.
Ashok.

Rounding a quantity field to one decimal place. PLEASE URGENT

I have a quantity field with three decimal places. I have to print this field with only one decimal place. This is in a smartform.
suppose: qty = 45.678
I want it to be printed as 45.7
Thanks in advance.

Hi Riki,
I think you can use Function Module ROUND to round off the value...
REPORT ZTEST_SHAIL4 .
data: out type p decimals 1,
inp type f.
inp = '45.678'.
CALL FUNCTION 'ROUND'
EXPORTING
DECIMALS =
input = inp
SIGN = ' '
IMPORTING
OUTPUT = out
EXCEPTIONS
INPUT_INVALID = 1
OVERFLOW = 2
TYPE_INVALID = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Now use the variable 'out' to display the rounded off value...
Regards,
SP.

Quantity field to one decimal place. PLEASE URGENT

I have a quantity field with three decimal places. I have to print this field with only one decimal place. This is in a smartform.
suppose: qty = 45.678
I want it to be printed as 45.7
Thanks in advance.

Create one more variable in Global definitions with only 1 decimal place.
Assign value of qty to this new variable.
SAP automatically takes care of the rounding.
And then print this new variable rather than qty.
You can write all these in a code block.

Increase in decimal places in unit of material

Dear All,
Please let me know the procedure for increasing the decimal places in a material unit.
regards,
GHS.

Transaction CUNI. Select the UOM and click on the magnifier of function key F5. You can find the place where the decimal places are mentioned. Consider impact that may affect, before changing.

Change the decimal places in screen MIGO field Order quantity - MENGE

Gurus
the scenario is in Screen MIGO , when gettin inside posting MIGO the functinal consultants need to give order quantity in the second screen and the technical name of that field is MENGE which can accept only 2 decimal places after point...now the requirement is we need to have 5 decimal places after point in that field...
how to achieve this....

still not solved.
impact analysis

Routing - decimal places for unit of measure conversion quantity

Hello all,
in the change routing screen in SAP (CA02), when going to a operation detail screen, a unit of measure conversation value can be defined. A value for header and operation can be made.
Currently we cannot set any decimal values for operations, I get the error message: "decimal places are not permitted."
Where in customizing can I change that?
Thanks
Anne

Hello,
thanks for the answers.
The UoM is LB.
I've already checked CUNI, but I can not find LB..?
Also I've noticed other places in SAP, for example the base quantity of some operations in the routing have a numbers with 3 decimal places and the same UoM LB, so this looks like the UoM is setup fine, maybe there are just problems with this special screen?
Thanks
Anne

Material Quantity Decimal Places

Similar Messages

Maybe you are looking for