Material Quantity difference document line item for HU

Dear Experts,
When I try to clear differences in LI21,  i get the error message as above.
Error Message : 'Material Quantity difference document line item for HU'
Any idea why this error occurs?
Regards,
Shetty

Hello Shetty,
It may be due to some stock inconsistency. You may try iin case of  a non HU managed storage location HU to run LX23 and it can fix discrepancy overwrting MM-IM with LE-WM data. But if it is a HU managed then you can run HUDIFF transaction but only to see if there is stock differences not to fix anything, usually SAP Support (Development Support) does that job.
Have a nice day !!

Similar Messages

  • SD - Accounting document line items are generating for each item

    Hi all of you,
    We have done account determination for SD. Accounting documents are also generating, but with in the invoice accounting document, number of line items are generating for each item with in the sales order, standard invoice type is F2 like -
    Item 001 - X Material
    Item 002 - Y Material
    Item 003 - Z Material
    The accounting document is -
    Line Item 001 - Customer Ac Dr
    Line Item 002 - Discount A/c Dr
    Line Item 003 - Sales revenue
    Line Item 004 - Discount A/c Dr
    Line Item 005 - Sales Revenue
    Line Item 006 - Discount A/c Dr
    Line Item 007 - Sales revenue
    Line Item 008 - VAT
    Even, in my experience I did not find this type of entry and the sales revenue and discount accounts are same with in the COA and is posted with in the plant.
    Please give me your valuable suggestion to rectify the above issue.
    Regards,
    Ramki
    Edited by: Ramki on Nov 5, 2009 10:06 AM

    Dear Ramki,
    This is SAP Standard. System generates Accounting document line item for each Line items in Invoice.
    This is standard & also required bacuase say you have different Material types in single Invoice (e.g.Material & Service items, Trading Goods, etc). The valuation class assigned to these Material Types may be different & you might want to post revenues from these Line items in different GL Accounts.
    Hope this helps. .
    Thanks,
    Jignesh mehta

  • Material document line item - inventory valuation affected ?

    Hello
    In the framework of building a stock report, I'm trying to know if a material document line item has affected inventory valuation that is to say if a corresponding accounting document line item has been posted.
    Explored solutions :
    - there is no link between MSEG and BSEG
    - I tried to look at Quantity string (BUSTM) in MSEG and looked at Quantity strings parameters in T156M but couldn't find a parameter of the value string mentionning if it affects inventory valuation or not
    Thanks a lot in advance for your inputs
    Regards

    Hi,
    MKPF is for material document header table MSEG is for material document item table
    Creation date will be at the header table, use document number to link both the tables.
    Regards
    Merwyn

  • More than 999 line items for an FI Document

    Hello All,
    Per SAP standard, an accounting document can only contain up to 999 line items. However, we have Logistics posting (Backflush) that would yield more than 999 line items in FI. We can't opt for setting summarization in transaction OBCY (FI Summarization based on Object Type) since this would affect GR/IR clearing. We can select reference transaction key MKPF (Material Doc Table) and table BSEG (Field MENGE <Qty>) but GR/IR clearing would be affected since definition of clearing is at Purchasing Doc (EBELN) and Item (EBELP).
    Do you have other recommendations?
    Thanks.

    Dear scorpio0485,
    Yes ! I have already done posting for morethan 999 line items. but in the standard program we cant do it. We need to go for Z process.
    In Zprocess we need to put one cut off line item for ex : 900 or 950. After that hardcode one GL code(clearing GL Code) in program to split the line items. Means the system generates 2 documents.
    Please give the following Code to ABAPer
    AT END OF xblnr.
          mtab[] = ttab[].
          CLEAR v_count1.
          DESCRIBE TABLE ttab LINES v_lines.
          LOOP AT ttab INTO wa_ttab.
            v_tabix = sy-tabix.
            v_count = v_count + 1.
            IF v_count EQ 900.
              count = count + 1.
              v_count1 = v_count + v_count1.
              MOVE-CORRESPONDING wa_ttab TO wa_xtab.
              IF v_wtotal < 0.
                wa_xtab-newbs = '40'.
                wa_xtab-newko = '00003100001'.
              ELSE.
                wa_xtab-newbs = '50'.
                wa_xtab-newko = '00003100001'.
              ENDIF.
              IF v_dtotal < 0.
                wa_xtab-newbs = '40'.
                wa_xtab-newko = '0003100001'.
              ELSE.
                wa_xtab-newbs = '50'.
                wa_xtab-newko = '0003100001'.
              ENDIF.
              IF v_dtotal LE 0.
                v_dtotal = v_dtotal * -1.
              ENDIF.
              IF v_wtotal LE 0.
                v_wtotal = v_wtotal * -1.
              ENDIF.
              wa_xtab-prctr = '0000900008'.
              wa_xtab-dmbtr = v_dtotal .
              wa_xtab-wrbtr = v_wtotal .
    If you need anymore,please let us know

  • Same material can exist on multiple line items for the same order.

    Hi
    Is there any specific customising setting or web shop setting through which we can restrict user to add same material on multiple line items for the same order ?
    Regards

    No.
    But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
    Eawar Ram
    http://www.parxlns.com

  • Help on GOA screen control at line item for only material

    Hello All
    scenario:-
    1. create a GOA
    for a material with has alternative UOM ( CAR - ORDER UNIT ; 1 CAR - 34 ea) . So i created GOA FOR MATERILA LINE ITEM.
    FOR CAR .
    2. I released GOA and distributed GOA for CAR as Oeder Unit UOM.
    3. now my buyer  go to GOA and change UOM as EA and price I AND CHANGE THE PRICE IN THE SAME  LINE  ITEM.
    4. No PO released against the COntract in the ECC 
    5. Unfortunately buyer could change this UOM from CAR to EA. now GOA shows as EA in the line item
    6. this info taken to ECC via IDOC but this info  never updated in ECC contract.
    7. my PO release as CAR forever rather than EA since my ECC contract always shows  as CAR
    i can lock this item i can create  a new line item, no issues.
    how buyer knows each time ? if the system allows buyer always try to change rather than entering new item. it is not buyer fault. it is srm fault.
    Now ican u suggest some code in ui control badi , if the PO not releases system should not allow to change  the UOM in the GOA line item for a material.
    PS:- once PO released against contract  . srm will not allow to change the UOM . that is fine.
    SAP has to correct this problem and release the note.
    Muthu

    Hi Donald/SCot/ kiran/ jay...
    are you having the same problem in SRM 700. front end validation is required here toooooo...
    please help me.
    I could not accept this functionality ..
    why SRM allows to change the UOM by the buyer after  release the GOA for the same line item
    if srm allows to do edit, SAP SRM and ECC has to update the same UOM in the existing purchasing contract. IDOCs carry all new uom but why not updated in ECC purchasing contract.
    decided to write own logic in ui badi to protect this. what to do
    Muthu

  • Remove symbol # for long text in document line item

    Dear Experts,
    I enter some information in the long text field in document line item. For the area that I use "Tab" button, system will display as # symbol. Therefore when we print the information, the output will include the #### symbol which is not correct.
    Please help.
    Thanks.
    -Syaban-

    Dear Gaurav Aggarwal,
    Thanks for the reply, can you guide me the step to perform the suggested solutions? currently, we are using ECC6.
    Thanks.
    syaban

  • Separate line item for taxes in accounting document of MIGO

    All SAP Gurus,
    As we can have separate line item for Freight amount (Freight amt credited) in accounting document for MIGO.
    Similarly is it possible to have separate line item for tax amount which is inventoried.
    Regards,

    Hi Rajan,
    Freight is from pricing procedure whereas tax is from taxing procedure.
    Tax cannot be shown in separate g/l in MIGO.
    Reason:
    If u wanna show tax as separate item then we need to debit tax a/c in migo as well as it has to go to inventory which is not possible(double accounting enrty on debit side).
    I too tried to do the same by specifying 2 for posting indicator and selecting non deductible for the nonsetoff account key used in the taxing proceudre in OBCN but it is behaving like setoff tax.
    U can also try doing the same and then check.
    Reg
    Raja

  • Post long text for document line item via FI-GL Inbound IDoc

    Hi guru,
    I am trying post extension ZFIDCP02 linked basic type FIDCCP02 and message type FIDCC2 IDoc in R/3 (4.6c) via IBM Websphere (Inbound IDoc),
    I am use inbound function module IDOC_INPUT_FIDCC2 and activate exit 008 (EXIT_SAPLF050_008) and exit 002 (EXIT_SAPLF050_002),
    In the extension ZFIDCP02 and under E1FISEG, I am add my segment  ZITEXT include field TDSPRAS, TDID, TDOBJECT, TDLINE.
    I am send  ZFIDCP02 IDoc via IBM Websphere no error  but all field TDSPRAS, TDID, TDOBJECT, TDLINE in my segment  ZITEXT not post in FI-GL.
    How can I  post long text for document line item (ZITEXT) in FI-GL ?.
    and I'm mean post ZITEXT to bank statement via IDOC.
    Please throw light on this  and  may be I  'm want solution or example ABAP code for exit 002 (EXIT_SAPLF050_002).
    Thanks in advance,
    Akkapong Pirachai
    CAT Telecom
    Edited by: Akkapong Pirachai on Aug 20, 2008 7:40 AM

    Close question because long time for answer.

  • Table for line items for parked documents

    Hello all,
    Do anyone know what is the table for line items for parked documents(fbv3)?
    Because I check bseg and these doc. aren't there.
    Thanks a lot!

    Hi,
    Please Check table "VBSEGS" you will get parked document ine items .please check below link it will clear...
    Find tables for GLs on Parking Documents by FB60
    Thanks in advance
    Chakri

  • Separate line item for each invoice in payment document

    Dear Experts,
    while making payment for a vendor through F-58 for multiple invoices, the system grouping the invoices on Business Area basis and giving the line items.
    For example there are 2 invoices for 5000 and 6000 in one BA and another 2 for 4000 and 9000 in second BA, the system is generating the entry as follows
    Vendor  A/c Dr   BA1  11000
    Vendor A/c  Dr   BA2  13000
    Bank    A/c  Cr            24000
    I want the system to generate separate line item for each invoice instead of 2. How do i do it?
    But this is not happening when i am making partial payment and in that case it is generating 4 line items.
    regards
    Suresh

    Thanks for the reply
    Checked it but still it is working in the same way.
    It is a requirement for the client, is there anyway to do it?
    Regards
    Suresh

  • FB60 - Two line items for tax amount (Posting Key - 50)

    Hi,
    I am facing some issue in FB60 invoice posting. For the same vendor(say V1) I am posting 2 different invoices for 100 USD - the <u>company code, G/L, CostCenter & Tax Jursdiction code are different</u> in both the cases. Once I do FB60 and got to document overview screen this is what I see...
    <b>Case1</b> - in the document overview screen I see a Posting key(PK) 31(invoice amount), PK50(tax amount) & PK40(total amount)...which is fine.
    <b>Case2</b> - in second case the document overview shows two line items for PK50(credit - tax amount) and tax amount is different.
    Two questions...
    1) Why there are two tax items (PK50 items) - is that dependent on tax rule or vendor or company code?
    2)My client says the tax amount should be same in both cases - but I am wondering how can it be, when tax codes are different in both the cases? Where can I check how these tax values are getting calculated.
    Any adivse/hints will be greatly appreciated/rewarded.
    Thanks
    Kiran

    AKu
      I got the same scenario also
      this second document display because of material price change u can double click that document

  • SD document line items Vs FICA accounting document line items

    Hello All,
    What is the interface we use in SAP,  between the SD and FICA which will determine line items in FICA document with regard to SD line items.
    SD : How we do configuration or mapping between sd sales order and billing document to determine billing document line items  based on sales order line items ( for example : material group, profit center, cost center ?)
    FICA: what interface / Configuration we use to determine how many line items should appear in the FICA document based on billing document line items.
    Regards,
    John.

    Integeration of SD to FICA is based on the img settings done under the node - SPRO - Financial accounting ( new ) - Contract accounts receivable and payable - integration - Sales and distribution .
    Creation of FICA document based on SD is routed through the event 4000 and the details are detrived through event 4030 .
    Would suggest you to go through events 4000 and 4030 .
    Regards ,
    Dewang

  • Document line item text in Clearing document

    Dear All,
    Document line item text
    My client want the vendor invoice line item text(BSIK-SGTXT) to be captured in the corresponding clearing document line item text field(BSAK-SGTXT).
    (i.e) The vendor invoice and its payment clearing document should have the same text in the document line item text filed.
    According to me i can use  a substition rule and a user exit to assign the values. but here comes a problem* i have one clearing document against 3 to 4 vendor invoice documents* so my programming logic has got stucked here? like which vendor invoice line item text the clearing document should pick up?
    is there any other enhancements possible or can some one help me with the programming logic to be applied here.
    Thank you
    Regards,
    Vasanth D

    like which vendor invoice line item text the clearing document should pick up?
    is there any other enhancements possible or can some one help me with the programming logic to be applied here
    Why don't you discuss the issue with your client?  As you said, if you pay 5 invoices in a single run, the payment document item text can't carry all of those texts unless you use the long text.  What is the reason for the requirement?  Perhaps there's another solution.

  • Single line item for multiple line item payment.

    Hi
    I have booked the 3 vendor invoices (in FB60) for a single vendor. Now today i paid (with F-53) all the three invoices together. One payment document number was generated.
    However when i saw the vendor line item, i saw that three debit line items was generated for the clearing the open invoices (i..e 3 credit line items). so when i say vendor line item report, there were total 6 cleared line items (3 for credit i.e invoice and 3 for debit i.e. payments)
    But is it possible to get  single debit line item for all the three invoices cleared. If yes, please let me know how i can get it.
    If i will have one single line item for payment, vendor report would be simpler. Please help

    Hi,
    1. If you do payment through F-53, then each invoice have separate payment line item. This is not avoidable. If you do payment through F110, then you can group the line items for payment, so there only one payment line item for many number of invoices.
    2. While clearing through F-44, system is generating automatic line items because, there are exchange rate fluctuations. You can't avoid these line items, as these automatic line items only match Debit and Credit amounts in order to post the document.
    Rgds
    Murali. N

Maybe you are looking for