Material related Question ..

There are terms like ITEM CATEGORY GROUP and GENERAL ITEM CATEGORY GROUP.
what is the differance in both??
what is the use of the GENERAL ITEM CATEGORY GROUP?

hello again, friend.
in the material master, Sales Org2 view, you will find General Item Category Group and Item Category Group.
there are situations when the material behaves differently depending on the sales organization/distribution channel/plant. Let's say your material R1100 was created with item category group NORM in the following sales areas:
sales organization/distribution channel/division
1000/01/01
1000/02/01
now let us say that R1100 has a BOM created, and which should explode in the sales order for sales area 1000/02/01 only. you also want pricing and inventory relevance to be at Higher level and not at component level.
you will now execute MM02, enter Sales organization/Distribution Channel 1000/02, and go to Sales Org2 view. the entry in General Item Category Group can remain as NORM. you now change the entry in Item Category Group to ERLA.
after you save the material master, you make the necessary pricing condition records. now process sales order in sales area 1000/02/01. the material BOM will be exploded.
but if you process sales order for the same material in sales area 1000/01/01, there will be no BOM explosion.
hope this helped.
regards.

Similar Messages

Material Ledger Question with "Individual PO" process

Hello All,
I have a material ledger question related to the individual PO process in SAP where a Sales Order is Created, which automatically generates a Req/PO. The materials from the Req/PO are received into the plant for which the Req/PO was created, and the Stock type of this material becomes Sales Order Stock. Then a outbound delivery is created to issue the goods to the customer on the original sales order that started this whole process.
The issue is that the material ledger is not reflecting the goods receipt at the time we do the goods receipt against the PO, as it does with all other goods receipts. It will only be reflected once the outbound delivery to the sales order is created. Therfore the general ledger and the material ledger subsidary are not in balance. This will not be a problem as long as the sales delivery is created within a few hours as expected, but if the receipt and sales delivery crosses a month end, this will cause an issue. This would also be a problem for us at physical inventory.
Is this supposed to happen in this process? Is there a report to show where the outbound deliveries need to still be created for sales orders in this process that can be used for us at month end? Any help you could provide would be greatly appriciated. Thank you.

Interesting issue.
Just curious... I feel you have done this, but in CKM3, can you key in the Sales Order number in the field provided and then see what the result is? What does it show?
Cheers.

PM/EAM related questions posted in PLM forum

Hi,
I was going through some of the threads available in PLM forum, but to my surprise, most of the threads posted are related to PM, which should have been posted in EAM forum. It was clearly mentioned by the moderator in one of the sticky thread [PLM-Forumsplit - Please ensure you are using the right forum|PLM-Forumsplit - Please ensure you are using the right forum;
Questions regarding Plant Maintenance (PM) or Customer Service (CS) are discussed in the Enterprise Asset Management (EAM) forum
forums - posts will be moved to the right forum.
Please ensure your are opening a new thread in the right forum
Despite the clear instructions given my the moderator, PM related questions are still posted to PLM forum and some of the active participant of EAM forum answers these questions in PLM forum. It would be nice if those threads are moved to appropriate forum, so that the relevant informations are available under one forum, also, PLM forum should be monitored regularly and inappropriate threads are to be moved to their respective forum.
Few PM related threads posted recently in PLM forum:
[Change PR for External order|Change PR for External order;
[BAPI or Function Module to Complete Maintenance calls in IP10|BAPI or Function Module to Complete Maintenance calls in IP10;
[delete material from PM order|delete material from PM order;
[Message no. IW056 Work center change --> default data redefined|Message no. IW056 Work center change --> default data redefined;
[Component in Task list not reflecting in maintenance order|Component in Task list not reflecting in maintenance order;
[Deleted functional location/equipments|Deleted functional location/equipments;
[PM orders not listing components from material BOM|PM orders not listing components from material BOM;
[Completion date in Maintenance Plans in IP10|Completion date in Maintenance Plans in IP10;
I had used abuse reports for some, but numbers of such posts are many.

I hate to say this, but I often see the same thing, and I've never been able to figure out exactly what triggers selectability vs. non-selectability, but I suspect some of it has to do with tranparency flattening in particular, and possibly text wrap in cases where that comes into play. ID optimizes the PDF it creates, I think, and that might cause text, or even images, to be broken into chunks in funny ways. It occurs to me that turning off optimzing for fast web view might help in this regard.

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
ible?
(2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
(3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
(4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?

Hi Vishal,
I'll try to answer your questions as best I can.
1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
Ron

ABAP programing material related to BW.

Hi Experts,
Im new to BW/BI. Can anyone please tell me where I can find ABAP programing material related to BW.
Thank in advance.

I can also recommend my book [http://www.sap-hefte.de/katalog/hefte/titel/gp/titelID-1273]. It contains all the often used exits with practical examples, a long sample of the transformation and I received a lot of positive feedback. A second reworked edition that also contains the BPS and Integrated Planning is currently in work and will probably appear this fall.
Best regards
Dirk
Edited by: Dirk Herzog on Jul 20, 2008 8:38 PM

MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS

Dear Experts,
Is there any separate t code available to MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS ?
I got this POINT from ECC 6.0 features in Solution browser.
Please help me on this.
MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS:
Functionality Enhancements
Provides a specific transaction for mass maintenance of material related excise duties fields
Business Benefits
Mass maintenance can now be performed in one step for material-relevant excise duties fields, instead of maintaining the excise duties fields in each material master record separately.
Regards
Soundar.G

Dear Ravi,
I have already created LSMW for this in Material master and J1ID.
But i have checked in ECC 6.0 feature, there they are mentioning New t code is available for MASS maintenance of excise duty fields.
Regards
Soundar.G

MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS - T CODE

Dear Experts,
Is there any separate t code available to MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS ?
I got this POINT from ECC 6.0 features in Solution browser.
Please help me on this.
MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS:
Functionality Enhancements
Provides a specific transaction for mass maintenance of material related excise duties fields
Business Benefits
Mass maintenance can now be performed in one step for material-relevant excise duties fields, instead of maintaining the excise duties fields in each material master record separately.
Regards
Soundar.G

Dear Ravi,
I have already created LSMW for this in Material master and J1ID.
But i have checked in ECC 6.0 feature, there they are mentioning New t code is available for MASS maintenance of excise duty fields.
Regards
Soundar.G

In which Board we need to post cRIO related Questions?

sir,
In which board do i need to post cRIO related Questions and doubts regarding my application with cRIO .Please help me previously i have posted in motion control drives as my application is related to motor control using cRIO.bu i am not getting any reply .i couldnt find any cRIO related board in select board option.
Solved!
Go to Solution.

Hi illa,
You can post your query under the Real Time Measurement and Control
http://forums.ni.com/t5/Real-Time-Measurement-and/bd-p/280

Bill of material related data.

Dear experts,
I want to know is their any standard datasources to extract Bill of material related data(Material,Component) to BI.As the data in standard tables like MAST,STPO,STKO.
Pts will be assigned.
With Regards,
Meiyappan

Hi,
Check these links:
Hope these links would be of some help
http://help.sap.com/saphelp_erp2005/helpdata/en/ea/e9b7234c7211d189520000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/2e4114a61711d2b423006094b9d648/frameset.htm
http://www.sap-img.com/sap-sd/sales-bom-implementation.htm
http://www.sap-basis-abap.com/sappp007.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/40b8aeaa5bba4d9a81c7332119a4b4/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d9/6eeedf6d44f242902eafc361924026/content.htm
Sasi

Two related questions: ColdFusion 10/Java applications and J2EE supported servers

I have two related questions:
1. CF10 and integration with Java Web applications
We have a couple of Java applications running on JRun and interfacing with CF9 applications. The JRun clusters were created through the JRun Admin and, apart from lack of Axis 2.0 support, have served us well for years now. And, as would be the case, the ColdFusion9/Java/Flash application is a critical public-facing application that the business uses for bidding on projects.
It appears that with ColdFusion 10 on Tomcat, we will not be able to run those Java applications on a Tomcat-CF10 JVM cluster. Is this correct? IF so, what are our options?
2. J2EE Application Servers supported by Adobe for CF10
Which of these is correct?
A. This URL (http://www.adobe.com/products/coldfusion-enterprise/faq.html) states "ColdFusion 10 supports IBM® WebSphere, Oracle® WebLogic, Adobe JRun, Apache Tomcat, and JBoss."
B. This URL (http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/cf1 0/coldfusion10-support-matrix.pdf) states:
"J2EE application servers: WebLogic Server 10.3, 11.1, WebSphere Application Server 7, ND 7 JBoss 5.1, 6.0, 7.1.0"
I *think* "A" above is wrong re. support for Adobe JRun. It does not specify a version of Apache Tomcat unless it is simply referring to the custom version the comes with CF10.
Option "B" above shows no support of Adobe JRun or 'standard' Apache Tomcat.
Thanks,
Scott

Question 1 above was answered: "No support for Java web applications under CF10's custom version of Tomcat"
Question 2: No answer yet: Is Apache Tomcat (NOT Adobe's customized version) supported for CF10 J2EE deployment? I do not see any installation instructions on how to install CF10 on Apache Tomcat 6 or 7.
Is anybody using Apache Tomcat as their J2EE app servers and, again, NOT Adobe's customized/limited version?
Thanks,
Scott

Can any body provide me CO Certificatioin material and question papers.

Dear Experts,
Can any body provide me CO Certificatioin material and question papers.
Regards,
Ramesh.

Ravi,
If you allow, this is what I would suggest -
1) First focus on the concepts. Understand how MDM goes beyond the traditional database concepts of master child relationship and uses concepts of Hierarchy Table, Taxonomy/Attributes tables, Qualified Lookups etc. RKT material exercises are good enough for quick ramp-up on these concepts. Once you have got the concepts, you will be able to easily create a XLS file yourself. Also the fun is not in importing an XLS file that has been created specifically for import into MDM. Any logical data structure in xls should be importable into MDM by using the functionality of MDM Import Manager
2) In the RKT material you should find an exercise called Case Study. I am emailing a Spreadsheet that created to use with this exercise. It is basically a Products Main Table, with Manufacturers coming from a Hierarchy Look table and Categories and Attributes table to store product classifications.
Let me know if this was helpful.
Vinay

Material relating to ALV

Hi folks,
plz send me the material relating to ALV, to my mail id [email protected]
it's very urgent.
Thanks & Regards
pabitra

Hi,
I am sending sample program for alv.
Kindly check it.
REPORT:
REPORT YMS_COLOURALV NO STANDARD PAGE HEADING.
TYPE-POOLS: SLIS, ICON.
DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: BEGIN OF IMARA OCCURS 0,
          LIGHT(4) TYPE C,
          MATNR TYPE MARA-MATNR,
          MTART TYPE MARA-MTART,
          MAKTX TYPE MAKT-MAKTX,
          COLOR_LINE(4) TYPE C,
          TCOLOR TYPE SLIS_T_SPECIALCOL_ALV, "cell
      END OF IMARA.
DATA: XCOLOR TYPE SLIS_SPECIALCOL_ALV.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM WRITE_REPORT.
Get_Data
FORM GET_DATA.
WRITE ICON_GREEN_LIGHT AS ICON TO IMARA-LIGHT.
      IMARA-MATNR = 'ABC'.
      IMARA-MTART = 'ZCFG'.
      IMARA-MAKTX = 'This is description for ABC'.
APPEND IMARA.
WRITE ICON_YELLOW_LIGHT AS ICON TO IMARA-LIGHT.
      IMARA-MATNR = 'DEF'.
      IMARA-MTART = 'ZCFG'.
      IMARA-MAKTX = 'This is description for DEF'.
APPEND IMARA.
WRITE ICON_RED_LIGHT AS ICON TO IMARA-LIGHT.
      IMARA-MATNR = 'GHI'.
      IMARA-MTART = 'ZCFG'.
      IMARA-MAKTX = 'This is description for GHI'.
APPEND IMARA.
LOOP AT IMARA.
    IF SY-TABIX = 1.
      IMARA-COLOR_LINE = 'C410'.     " color line
    ENDIF.
    IF SY-TABIX = 2.                " color CELL
      CLEAR XCOLOR.
      XCOLOR-FIELDNAME = 'MTART'.
      XCOLOR-COLOR-COL = '3'.
      XCOLOR-COLOR-INT = '1'.       " Intensified on/off
      XCOLOR-COLOR-INV = '0'.
      APPEND XCOLOR TO IMARA-TCOLOR.
    ENDIF.
    MODIFY IMARA.
ENDLOOP.
ENDFORM.                    "get_data
WRITE_REPORT
FORM WRITE_REPORT.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV.
LAYOUT-COLTAB_FIELDNAME = 'TCOLOR'.
LAYOUT-INFO_FIELDNAME = 'COLOR_LINE'.
PERFORM BUILD_FIELD_CATALOG.
CALL ABAP LIST VIEWER (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FIELDCAT
    TABLES
      T_OUTTAB    = IMARA.
ENDFORM.                    "write_report
BUILD_FIELD_CATALOG
FORM BUILD_FIELD_CATALOG.
DATA: FC_TMP TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
CLEAR: FIELDCAT. REFRESH: FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC    = 'Status'.
FC_TMP-FIELDNAME = 'LIGHT'.
FC_TMP-TABNAME   = 'IMARA'.
FC_TMP-OUTPUTLEN = '4'.
FC_TMP-ICON       = 'X'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC    = 'Material Number'.
FC_TMP-FIELDNAME = 'MATNR'.
FC_TMP-TABNAME   = 'IMARA'.
FC_TMP-OUTPUTLEN = '18'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC    = 'Material Type'.
FC_TMP-FIELDNAME = 'MTART'.
FC_TMP-TABNAME   = 'IMARA'.
FC_TMP-OUTPUTLEN = '10'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC    = 'Material'.
FC_TMP-FIELDNAME = 'MAKTX'.
FC_TMP-TABNAME   = 'IMARA'.
FC_TMP-OUTPUTLEN = '40'.
FC_TMP-EMPHASIZE = 'C610'.   " color column
APPEND FC_TMP TO FIELDCAT.
ENDFORM.                    "build_field_catalog
Thanks,
Shankar

Want to have Training material and question to crack SAP XI certification

Hi,
This is hemant.
I want to do XI certification . Can u plz give me the training material and question to do that.
My email id is <b>[email protected], [email protected]</b>.

Hi Hemant,
Do you have Marketplace access? If yes, you can go to the following links:
https://service.sap.com/%7Esapidp/011000358700005902252004E
https://service.sap.com/~sapidp/011000358700003595762004E
If no:
Important topics are mentioned with +++
SAP Consultant Certification
Development Consultant SAP NetWeaver 04 Exchange Infrastructure & Integration Technology
Software components: SAP XI 3.0
Certification ID (Booking code): C_TBIT44_04
Certification duration: 3 hours
Number of certification questions: 80
Required certificates for participation in this certification test: none
Courses for certification preparation: TBIT40 (XI foundations), TBIT41 (Mapping Concepts), TBIT42 (Adapters Concepts), TBIT43 (Business Process Management Concepts), TBIT44 (Mapping, Adapters and BPM)
Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
The certification test Development Consultant SAP NetWeaver 04 Exchange Infrastructure & Integration Technology verifies the knowledge in the area of SAP NetWeaver for the consultant profile Exchange Infrastructure & Integration Technology. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
The certification test consists of questions from the areas specified below:
Topic Areas
1. Overview
Positioning
Architecture overview
Key functionality
2. Design and Configuration (++)
System Landscape Directory
Integration Repository
Integration Directory
Business Process Management
Adapters
3. Runtime
Integration Engine
Runtime Workbench
Basic server administration
Security
4. Mapping (+++)
Concepts / Overview
Test / Debug Environment
Standard functions
User-defined Functions
Message mapping patterns
Multi-mapping
ABAP, Java, XSLT mapping overview
5. Business Process Management (+++)
Basic concepts
BP Modeling
BP Engine
6. Adapters (+++)
Overview and basic concepts
J2EE Adapter framework
Partner Connectivity Kit basics
Individual Technical Adapters
Advanced Concepts
Amount of questions by topic (as percentage of test):
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
Also go through the following links:
SAP XI
/message/908786#908786 [original link is broken]
/people/sap.user72/blog/2005/12/22/new-to-xi
/message/908786#908786 [original link is broken]
https://websmp202.sap-ag.de/nw04-kt
/people/sap.user72/blog/2005/12/22/new-to-xi
Here are a few sample questions:
Remember there will 80 question in exam that u need to finish in 180 minutes.
1. Which of the following is not a component of Exchange Infrastructure.
a. Integration Server
b. Adapter Engine
c. Business process management
d. Master data management
2. SAP XI is the integration technology and platform for
a. A2A and B2B Applications
b. Cross Component Business process management.
c. SAP and Non-SAP applications
d. Asynchronous and Synchronous Communication
e. All the above
3. Which of the following is not benefit of XI?
a. Pre delivered Contents
b. Total cost of ownership
c. Openness and Interpretability
d. Cross Component Business process management
e. Integration of all modules MM,SD,FI,PI etc.
4. Which of the mapping is not available in XI By default
a. Message Mapping
b. ABAP Mapping
c. Java Mapping
d. XSLT Mapping
e. None of the above.
5. Choose the true about types of mapping XI supports
a. Structure Mapping
b. Node mapping
c. Value Mapping
d. Functional Mapping
6. During Mapping the attribute or element is already assigned mapping, but mapping is not complete. What is the color of ICON for the element/attribute?
a. Red
b. White
c. Yellow
d. Green
7. Which of the following is not generic function?
a. concat
b. CopyValue
c. DateTrans
d. ifWithoutElse
8. Which of the following in not true about user defined Simple functions
a. process individual input filed values for each function call
b. Expect string as input parameter
c. Takes the object of GlobalContainer class
d. Return a string
9. Which of the following are required to create a user defined function
a. Name
b. Description
c. Argument Count
d. Label
10. Which of the following package are by default imported in user defined functions
a. java.lang
b. java.io
c. java.reflect
d. All the above
e. None of the above
11. Mapping trace does not support following function. Choose one
a. addWarning
b. addDebugMessage
c. addDebugInfo
d. addInfo
12. In Mapping Trace addWarning function which of the following is true.
a. Supports trace level 1,2 and 3 .
b. Supports trace level 1,2 .
c. Supports trace level 1 .
d. Supports trace level 1,2 ,3 and 4 .
13. Which of the following is not true about multi mapping
a. Multimapping supports m:n transformation
b. Use Abstract interfaces
c. Can be implemented without ccBPM
d. Development is same as Message mapping
14. Mapping template can be defined for structure mapping for the following structure. Chose the wrong one.
a. Data type
b. Complex types in IDOC and RFCs
c. Complex types in external definitions
d. Message types
e. Reference types used in multiple templates can be located in any software component.
Regards,
Abhy
Message was edited by: Abhy Thomas

Deafult search engine on a new tab-this thread was closed but I have a related question. Once you put the new url in, what then? Close? When tried, did not work

"deafult search engine on a new tab" - this thread was closed but I have a related question. [the word “default” is spelled as it on the thread] Once you put the new url in, what then? Close it? When tried, it did not work. The closest answer is noted here. Instructing to go to about:fig. Specifically, I installed the accuweather add=on and it took over my tab home page - the one that comes up when you click for a new tab. I didn't like it so I clicked the button to remove it and the page went blank. I searched to see out to restore the tab page, tired the reply at this page :
http://support.mozilla.org/en-US/questions/753256?s=install+search+box+on+new+tabs&r=3&as=s
But it did not work. Can some on help me? Just want to know how to make google or some page open on a new tab.
Many thanks

Thanks so much for your support. As I said I am not a professional, so I by chance saw a friend who is and this is what he suggested and it worked.
We googled for an answer and found this site: http://www.guidingtech.com/8004/have-new-tab-page-open-specific-website-firefox-chrome/
It says to Download and install Download and install''' NewTabURL''' and gives instructions on how to. Now when I open the tab it goes to my preferred search page!

Please post documentation-related questions or comments on the

Please post documentation-related questions or comments on the Performance Management Applications {forum:id=1318} forum
http://forums.oracle.com/forums/forum.jspa?forumID=1318

I just got a call today that I reached my 300GB limit for the month. I called and got a pretty rude response from the security and data usage department. The guy told me in so many words that if I do not like or agree with the policy that I should feel free to find another service provider.!!! I tried to explain that we watch Netflix and XFinity on-demand alot and I was told that that can not be anywhere close to the data usage. I checked my router and watching a "super HD, dolby 5.1" TV show on Netflix will average about 5-6 GB per hour (1.6MB/s) ... sp this means that I can only watch no more than 1-2 Super HD TV shows a day via Netflix before I run out of my data usage. This seems a bit redicilous doesn't it? Maybe the TV ads about the higher speed than the competition should be accompanied with "as long as you don't use it too often" Not a good experience ...

Material related Question ..

Similar Messages

Maybe you are looking for