Material repacement from Store/ QC

Hi Friends
I have one requirement ,
i.e
1. Material issue to the production against production order for 10 qty(5 rejected in production)
2. sent to QC for reinspection for 5 qty
3. How to move this qty to qc
4. QC will take 1 week to complete re inspection
5. How production guy replace this 5 qty immediatley from store
Please let me know the settings,
Thanks & Regards
Gajendranath

Hi
1. Material issue to the production against production order for 10 qty(5 rejected in production)
2. sent to QC for re inspection for 5 qty
3. How to move this qty to qc
When you issue the material it is 261 against the Production order.
So when 5 material is rejected in the production ,you will actually make the Confirmation of 5 Qty in CO11.Rest of the Quantity you can do 262.
Now Move this material to "QUARANTINE STORAGE location" like QRNT( only for rework ) .storage location where you will physically & in system ..carry out the rework.This can be done by Mvt type-311 in MB1B.
4. QC will take 1 week to complete re inspection
If Material After rework is ok then only again move material back.
5. How production guy replace this 5 qty immediatley from store
He can reissue material by 261 against reservation MB21 & then by MB1A against the reservation.
I hope this will help
Regards
Sujit

Similar Messages

Dilemma around material issue from stores

Hello
A national water management authority is replacing their paper-based systems with Oracle. They have sufficient licenses of Oracle Purchasing but not enough of Inventory and none of Order Management.
Departments send in their material requests for approval to their departmental managers. After approval, a departmental representative picks up the material from stores. This process is entirely now on paper. In my opinion, Move Orders is the "best" Oracle solution for this? Am I right?
However, our hands are tied by the constraint of fixed Inventory licenses. The number of requesters is many times more. To get around, we plan to have departmental batch user IDs in Oracle e.g. ACCOUNTING_DEPARTMENT_STORES_REQUESTER. Employees will enter their Move Order requests with their departmental user IDs and use the Reference field for their internal employee numbers. Is this the only option?
Regards,
Sanjib

Hello,
If you are open for customization you can try following.
0. create a dummy subinventory ..say DEPT ...(or u can also create multiple subinventories for each department ..)
1. Let the users create Internal Requisitions using their named user name ... here source organization and destination organization will be same but source subinventories will be stores and destination subinventory will be the DEPT subinventory.
2. Let it go for approval to department heads.
3. Once approved, write a custom concurrent program that will look for the approved IRs with destination subinventory = DEPT, and create Approved Move Orders of type Move Order Issue ...here Issue-To-Account should be derived based on Department. You can populate some DFF field on move order header with the reference of the Internal Requisition Id (This link will also be used in the IR selection criteria).
There are Public APIs available to create Move Orders.
(Requisition Approval workflow can also be modified to call the custom procedure, instead of scheduled concurrent program)
4. Now Stores user (an Inventory user) will allocate and transact the material to department against the issue
Thanks,
Hrishi

Single time receiving material from stores for diff process order.

Dear all,
I am creating 5 different process order for 5 different FG material.
But for all 5 fg material one bill of material is common to all.
While receiving material from stores that particular bom i need to get single time only from stores for all five process order.
Kindly please let me know how to process.
Regards
Rajasekaran

Hi Raja,
As replied to your earlier threads, unique reseration is created against each process order. Accordingly issue also takes place againt unique reservation/process order. Use MB1A/MIGO for individual issue or pick list COIK where issue an be done by stores for all process orders in on go.
In SAP Mill Products once DIMP is activated there is combination order functionallity available where if operations/ BOM of 5 orders are same then combination order (New order) can be created by combining the qty of 5 individual orders. Here Goods issue is done against the new combined order which is single order for total 5 orders qty. This functionality i used in Discrete Maufacturing.
Have a look.
Combined Production Order Processing (DIMP)
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7c/ea814440ce11d385c70000e8200b4c/content.htm
Thanks & Regards,
Ramagiri

How faulty material from stores send to supplier & take back from refurbish

Daer Gurus
I have one scenario where the faulty material lying in stores c3 is to send to supplier which tranasctiontired 541 but not getting (Pr is generated through control key)
then how to withdraw the c3 from stores & again c2 back to stores
Can you focus more on this issue
Regards
chndrashekhar Ingole

hi chandrasekhar,
see wether this information is helpful or no
1. PR / Reservation slip generation is controlled at item category level.
2. For refurbishment, items are stocked , if items are ther in store once u release the order, reservation no is generated,you can issue the material using MB11 T Code and you can receive it using MB8W Tcode.
regards
pushpa

Material return to store?

hi
i have made a maintenance order and i want to return a component to store.so i have put -1 in the
component quantity and reservation no(movement type 262) is automatically created.now i want to post the material through mb1a but when i put the reservation number and item and it should adopt automatically,but it does not.but when i am doing through maintenance order it is ok.can anybody explain.
regards
sanjay

hi sanjay
I think u confused.
see when u issue material from store u first create reservation & then post material to ur order through MB1A or MIGO
But while returning material to store u first return material & then cancel reservation.
so just directly return material to store by MB1A or MIGO with movement type 262.(will be done by store person )
and when u complete order reservation will be automatically deleted.
Hope u understand
Regards,
Prasad

MM01 material copy from at plant levele

Hi,
I have a simple but very important question to ask about MM01 material "copy from" function.
When you copy a material at an organisational level other than general data (at plant level for exemple), SAP copies some data and left some others blank
For exemple, in "Work Scheduling" material views, it copies "Prod.Sched.Profile" data but not "Unit of issue" nor "Prod.stor.loc." data.
What make the difference between these data ? Why all isn't copied ?
Thanks for help
regards
Morgan

storage locations are plant specific customizing.
SAP cannot assume that the second plant would use the same keys like the first plant.
If SAP would copy the storage location, then it would result in an error if it is not customized for the target plant - better not to copy it.

Confirmation should not be allowed till materials issued from store

Hello friends,
I have a production order in which one material is issued automatically by Backflush function in confirmation and other material is issued manually. I want that confirmation must not be happen till materials are issued from store.
Waiting for reply!
Thanks!

HI
Check these BAdis for your requirement:
WORKORDER_GOODSMVT
RM_BFLUSH_GOODSMVT
also if working in REM then check REM profile for incorrect goods MVt in OSP2 and in Discrete check OPK4 with your oreder type for termination of incorrect goods MVt
Check and revert
Regards
Anupam Sharma

Various Goods issues from stores

Hi SAP gurus,
WE have implemented PS, MM , FICO, SD, Modules only
Now to issue goods from Stores what are the Criteria to be followed
based on what reference the goods issue should take place
the PS are creating Reservations and goods issue can be done to reservations
and for GI to Cost center, network, WBS, Project, Sales related, and for other requirement,
how will the SAP system notify the Stores for Goods issue as done iBY resevations,
Can goods be issued on Planned orders or Purchase requisitions also.
iam confused can any one throw light on Inventory management. and Goods issue.
any precautions while doing initial entry of goods to SAP should only be done BY MT 561?
Thanks and Regards
Sathish Kumar

Can goods be issued on Planned orders or Purchase requisitions also.
no u cant issue the goods Can goods on Planned orders or Purchase requisitions also.
u can issue it on Production order
iam confused can any one throw light on Inventory management. and Goods issue.
Goods Issue is a small part of inventory managenment
in Inv Mgt u have GR GI transfer posting Physical inventory etc
any precautions while doing initial entry of goods to SAP should only be done BY MT 561?
Its very imp part of implem is stock upload
u have to take care that the right price have to be upload in accounting view of those materials having S price indiacteo generally semifinased and finished material
As value of material with MAP ie V can be taken care at 561 but Material with S indactoer price in acounting view is very important. so before uploading stock check the prices of material with S
and u can put value in MB1A 561 for matrials with V indicator (u will have to activate amount field for 561 movement in OMJJ and make Ext. GA amount in LC field as opt entry
hope this helps
Reward if useful

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Just re-installed itunes and want to down load an app from store.Itunes informs me that my apple I/D has been disabled. Is there any way of re-enabling it, or do I have to create another apple I/D

Just re-installed itunes and want to download app from store. Itunes imforms me that my appleI/D has been disabled. Is there any way that I can keep my I/D by re-enabling it or do I have to create a new apple I/D

Read the tips in this article and see if any of them work for you. You may need to contact iTunes Support in order to get this resolved.
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/apple-id- disabled

ERROR -WHILE LOADING MATERIAL MASTER FROM A FLAT FILE

HI GUYS ,
I AM TRYING TO CREATE MATERIAL MASTER FROM A FROM FLAT FILE
IAM GETTIGN AN ERROR MESSAGE
'YOU HAVE NOT FULLY MAINTAINED THE DESCRIPTIONS'
REQUIRE HELP ON THIS
THANKS

Hello Nishant
All the inputs that are required to create a material in dialog (MM01) should be mandatory as well if you are going for LSMW or BAPI. Obviously your material requires a description (which will end up in MAKT). If you have this description in your flat file then there are additional (perhaps language-dependent) descriptions required.
You could try to use BAPI_MATERIAL_SAVEDATA in your test environment to find out the minimum input that is required to create a material in R/3.
You may also have a look at thread what are the parameters have to pass to bapi material creation?
Regards
Uwe

Replication of Customer and Material master from R/3 to CRM

Hi
Recently in our quality server basis administrator has made a client copy from production server after that customer master and material master are not flowing from R/3 to CRM, even sales orders were not getting copied from CRM to R/3 , i went through C71 BB config document and fixed the sales orders updation from CRM to R/3 but not able to resolve the problem of customer master and material master from ECC to CRM.
I went to B09 BB document and all settings are fine.
Using R3AS I have loaded following objects DNL_CUST_PROD0, PROD1, PROD3, SPROD , DNL_PLANT. and Material.
I went to R3AM1 and checked the status as running or wait for each object.
There are no filters in R3AC1 .
Queue name withR3AD_MATERIA0000000001 has status SYSFAIL in SMQ2 .
What can i do to resolve this problem.
Please advice.
Thanks,
Vaishnavi

Hello Vaishnavi,
After the client copy , have you run txn:BDLS in order to change the LOGSYS in all relevant tables?
You can run this txn in test mode as well to see the affected tables.
Are you getting any dump on these load ?Check it in txn:ST22.
Hope this helps!
Best Regards,
Shanthala Kudva.

Windows 8.0 to 8.1 64bit update failed from store

Hi,
I am trying to update windows 8.0 64bit to windows 8.1 from store but update get failed is there a way I download windows 8.1 manually and update it
Thanks
Ehsan

Hi,
Which version of Windows 8 did you use? Which error message did you encounter when you attempt to update from Windows Store? Is it in checking process or installation process?
Meanwhile, upload your CBS log file to OneDrive, post the shared the link in your next reply.
It could be found in below path:
C:\Windows\Logs\CBS\CBS.log
Karen Hu
TechNet Community Support

Windows 8.1 Pro upgrade from store on win-8 hangs at "preparing to restart" 98%

Hi,
I tried to upgrade win-8.1 Pro from store and it run more than 12 hrs and does not move after 98% "Preparing to restart".
I tried few times after restart also same.
why
Tks
hari

Hi，
By analyzing the error log, operating system did not have correct privileges to perform the upgrade.
Did your computer join the domain?
If your computer joined the domain,we suggested you to remove the machine from Domain and move it to a workgroup
Did you have multi-bootable partitions? If yes, mark your Windows partition as "Active".
http://windows.microsoft.com/en-us/windows/mark-partition-active#1TC=windows-7
If the issue persists,Run CMD as Administrator, type following command：
Repair-WindowsImage -Online -RestoreHealth
Also, find the following location,and update the ownership of this directory to the Administrators group and granted Administrators Full Control to the directory.
C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys
Hope this helps.
Regards,
Kelvin hsu
TechNet Community Support

Material Updates from ECC to CRM

Hi Experts,
We recently had application of Enhancement Pack4 on our ECC system. After the application EHP4 pack, we have started getting some material updates from ECC to CRM. And those updates are failing in CRM as we do not have any material set up in CRM. Due to these failed updates, lot of dumps are getting created in CRM. So can u please advice where/how in ECC i can restrict these updates to go to CRM. Any help in this will be highly appreciable.
Regards
Charitha

Hello Charitha,
In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
for your RFC destination (ECC).
This would prevent any automatic data flow for this object from R/3 to CRM.
Hope this helps!
Best Regards,
Shanthala Kudva.

Material repacement from Store/ QC

Similar Messages

Maybe you are looking for