Material replication errors - SRM 5.0

Hi all,
Iam getting error when i replicate material master from r3 to srm.
i successfully done service replication in to srm system, but material not.
error is :
Allocation of the tax for country IN, sequence 1, value 0 not possible
Message no. SRM_PRODUCT_SALES038
followed steps:
1. maintained all middleware parameters
2. R3AS , Load object as material , source site and destination site, selected source system and executed.
3.smq1 - no q's in the line
4. smq2 - the following q's re there.
R3AD_ATTRIBUTE
R3AD_CLASS
R3AI_MATERIAL
SRMD_ATTRIBUTE
SRMD_BUPA_MAIN
SRMD_CLASS
SRMD_MATERIACONTAINER
SRMD_MATERIAFINISHED G
SRMD_MATERIAHOS-A1
SRMD_MATERIAHOS-D21B
SRMD_MATERIAJEPLLEAS
SRMD_MATERIAM1
SRMD_MATERIAPAC01
SRMD_MATERIAPMTEST_MAT
SRMD_MATERIATEST_MATER
5. selected R3AI_MATERIAL and executed - status shown as SYSFAIL. due to error mapping.
6. SMW01 - checked the logs - error appeared like this.
Allocation of the tax for country IN, sequence 1, value 0 not possible
Message no. SRM_PRODUCT_SALES038
7. Went to R/3 material master - checked any material is having SALES VIEW with a tax code,
No where i found any thing in that....
Friends....need help...i stuck up...with the error....
any clues ...
regards
sai

Reason for the above problem is :
we need to maintain filter settings in R3AC1.
TABLE STRUCTURE: MARA
Field: PSTAT
OP:EQ
Incl/Excl : I Inclusive defined
I run the R3AS again after these settings,material replicated successfully.
thankyou so much muthu.
Very useful tips.....
regards
sai

Similar Messages

XI Integration scenario for material replication from SRM to SRM-MDM

Hi Guys,
We are working with the following landscape:
SRM Server 5.5
ECC 6.0
SRM-MDM 5.5 SP6
PI 2005_1_700 SP0006
I have a question for you about replication of the material master form SRM EBP to SRM-MDM.
In XI we are trying to configure this scenario. For this we have imported the following XI Content:
- SAP SRM Server 5.5
- SAP SRM-MDM 2.0
We have the following problem; that when tring to configure the this scenario we are getting GUID errors. Probable because some XI content is missing. In the SRM-MDM 2.0 XI content we also see that SRM 6.0 scenario's are avilable in the currenlty imported XI content, but when clicking on 'Edit action' in these scenario's we are getting the following error:
"Software component version with GUID XXXXXXXXXX... does not exists"
Can any one tell me why SRM 6.0 scenario's are availble in the XI content for SRM-MDM 2.0, and which additional XI content we need to import to get rid of these GUID error's?
Becasue of this the configuration in the Integration Directory fails.Transfering the integration scenario to the Integration directory gives a couple of errors: "Unable to load action. Check whether all necessary actions have been released in the integration repository".
Hopefully some of you know what to do, because I am currenlty stuck....... Do we need to import additional XI content, or maybe the Xi content for SRM 6.0. If so where can I get the XI content for SRM 6.0. It is not available on the SAP Support portal as a download.
Thx In advance.
Regards,
Wouter

Hi,
>"Software component version with GUID XXXXXXXXXX... does not exists"
try updating SLD (CIM DATA) with the latest patch available
Regards,
Michal KRawczyk

Material replication ECC-SRM, in wrong queue (outbound in SRM system)

Hi,
I'm working in SRM 5 integrating with multiple ECC systems.
When attempt to replicate materials from one of the ECC systems, if I run the transaction R3AS for MATERIAL, the Monitor Load Transaction shows the object is "Running" indefintely.
I checked the inbound queue in SRM and there was nothing there, then I checked the outbond queue also in SRM and the entry is there.
Which means its in the wrong queue it should be in the inbound queue.
By the way there was nothing related to the object in the queues on the ECC side.
Can anyone point me in the right direction to fix this.
Thanks and Regards'
David

As above people suggest: re-check customising, everything done correctly?
Now to the addition: what you see is correct behaviour, the initial download is started from SRM, so it sends the request from SRM outbound to ECC inbound and then the data from ECC outbound to SRM inbound.
Basically, check all queues in all directions to see if there is a sysfail somewhere.
Regards,
Robin

Problems during material replication from SRM 5.0 to ECC 6.0

Hello all,
I tried to replicate material master from ECC to SRM but i am not successful.
System can able to replicate all the product categories but not the material.
System showing the process is done and it is showing green light when i drilldown.
Can any one ever had experienced such a problem?
Thank you
mahesh

Hi
Please go through this ->
Note 884208 - Unusable Middleware objects are provided
Note 872533 - FAQ - Middleware
As mentioned in SAP OSS note 872533, DNL_CUST_BASIS3 is obsolete, therefore, Please skip the download of the object DNL_CUST_BASIS3 and continue with DNL_CUST_PROD0, DNL_CUST_PROD1 and MATERIAL.
Following OSS note 872533, DNL_CUST_BASIS3 is obsolete.(Though OSS note mention DNL_CUST BASIS3 is obsolete for SRM 5.0, However, this customizing object does help in synchronizing the UOM from R/3 to SRM.)
However, it seems to still work in SRM50...
Related link ->
Re: UNIT OF MEASAUREMENT
As an alternative :
For ISO codes synchronisation, you can go to transaction CUNI -> ISO and then select "utilities" -> "adjustment".
A pop-up will be displayed to select the backend code
Do let me know.
Regards
- Atul

Material Replication in SRM 5.0

Experts,
We are using SRM 5.0 and ECC-6.0, R/3 system has created new materials but it has not been replicated to SRM. Can someone please help me step by step to replicate new materials from ECC 6.0 to SRM 5.0.
Thanks in advance and points will be rewarded.
MP

Hi,
See the foll link for the detailed steps:
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
BR,
Disha.

Material replication in SRM backend

Hi Experts,
I have created one material in R/3. Now how can I replicate the same material in SRM backend?

Hi,
Once you create material it should be immediately available in SRM.
In case if not available, you can monitor through SMQ1 in ECC and through SMQ2 in SRM.
You can pull manually
tcode: R3AS.
Object: DNL_CUST_PROD1 ad DNL_CUST_PROD3 in sequence.
Hope this is helpfull

Automatic delta material replication in SRM

Hello,
Presently we are following the below procedure for replication of delta materials in SRM ( Manually)
1) Transaction code - R3AC1( Filter settings) - MARA(MATNR)
2) Transaction code - R3AS ( Start initial load)
3) Transaction code - R3AM1 ( Monitor objects ).
Can anbody guide me as to how I can set AUTOMATIC replication of DELTA materials on daily basis.
Thanks ,
Pankaj

smof_download program check it up
you can schedule this job.
try in development
to answer your another query.
Hi
BBP_PD
SELECT SHOOPING CARD.
GO TO THIS TABLE
Can you check
BBP_PDBEI
BE_OBJECT_ID =? HERE YOU MAY HAVE sto (purchase order number
br
muthu
br
muthu
Edited by: Muthuraman Govindasamy on Dec 23, 2009 3:00 PM

Vendor and Material Replication from ECC6 Ehp7 to SRM7.0

Hi Experts,
I am facing an issue with replicating Material and Vendor Master from ECC to SRM system.
ECC system - ECC6.0 Ehp 7 & SRM system - SRM7.0
Middleware setting is done as per Note 720819 and performed the object like DNL_CUST_BASIS3 , DNL_CUST_PROD0, DNL_CUST_PROD1 and found Sucess in SRM R3AM1.
Errors :
1. Material Replication Error in SMW01
Mat. for Initial Download: Table not supported by function
Alternative units of measure are inconsistent; correct the values COM_PRODUCT_UNIT COMM_PR_UNIT
Alternative units of measure are inconsistent; correct the values
Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.
2. Vendor Replication Error in BBPGETVD
Backend systems with Release 740 are not supported
Message no. BBP_BUPA002
What are all the compatabilty issues will be faced connecting SAP ECC6 Ehp7 with SRM7.0? Can any one list down.
Please Suggest the valuable comments to resolve the problem as earliest.
Thanks & Regards,
Ramprakash N

Dear Ramprakash,
Please check below URL for #1.
Alternative units of measure are inconsistent; correct the values in SMW01
Please find the following note which might help you for issue #2.
1313972
1349825
1372175
Thanks
Shuvrajyoti

Update material replication

Hi! I did the material replication in SRM 5.0 with Server 5.5, but I create in R/3 some materials after the replication....
I have to run new material replication process?? or I have another posibility?? I don´t know, a job, etc...??
Thanks
Rose

Hi Rosa,
Look at this thread for explanations on replicating hierarchies:
Switching Backend System
With initial download of DNL_CUST_PROD1, SRM creates 2 new hierarchies:
- R3MATCLASS for material groups/product categoris
- R3PRODHIER for material/service types.
The system assign each of them to purchasing & product applications.
Predefined set types are also assigned in R3PRODHIER.
With next download of DNL_CUST_PROD1, you can update R3MATCLASS, but not R3PRODHIER.
In your case, you would have to delete the existing R3PRODHIER (see how in the thread), but as you have already replicated products (assigned to a material type from this hierarchy), this won't be possible.
So, you must first delete the replicated materials (Hope you didn't use them in some SC...).
Rgds
Christophe
PS: please reward points for helpful answers

Material replication from R/3 to SRM - Issue with Material group

Hello All,
                  I am working on BADI PRODUCT_CUSTOMER2 and method MAP_R3_TO_CRM_MATERIALMaterial replication part from R/3 to SRM.
I am using a Ztable to map r/3 material group to SRM material group(Product category).
For example Material M1 with material group 100 is transferred to SRM. Material group(Product category) 100 exist in SRM, but I am changing the material group to 200 in the product_customer2 badi. its working fine.
In another scenario, Material with material M1 with material group 300. Material group(product category) 300 does not exist in SRM,
I am changing the material group to 200 in the bdoc, in the product_customer2 badi. It is not working. The LUW is failing in SMQ2 transaction with the error "Error in Mapping (Details: transaction SMW01)". The BDOC is failing with error "Category for material group 300 does not exist"
I tried to deactivate the badi PRODUCT_CUSTOMER2, even then the FM MAP_BAPIMTCS_AND_PROCESS is validating the material group from R/3.
I tried to change the material group 300 to the existing material group 200 at initial stage in debugging in function module MAP_BAPIMTCS_AND_PROCESS but still the bdoc is failing with error "No storage form defined for product type 01 / logical system".
I am doing my testing using the following steps.
1. change the material descriptioni in MM02 in R/3.
2. An item is displayed in the queue in SMQ2 in SRM.
3. I have debugged the LUW and analyzed my badi by setting breakpoint at method MAP_R3_TO_CRM_MATERIAL, its changing the material group in the bdoc properly.
   that didnt work.
   also i tried to change the material group in the function module MAP_BAPIMTCS_AND_PROCESS before the badi is called.
4. I am checking the BDOc status using tcode SMW01 and checking the material using tcode COMMPR01.
can someone tell me how I can change the R/3 material group to SRM material group at the time of mapping in SRM?
Thanks
Sathish PM

Hi find below for the product cat
Steps to create the product category in SRM:
1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3) Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

Overwriting Conditions data during Material Replication from R/3 to SRM.

Hi,
 When creating a new info record and then running the material replication program everything looks OK. However, if for the same material you create a new info record or change the existing info record and then run the material replication, some of the previous data is removed.
 We implemented BADI(PRODUCT_CUSTOMER2) to read info records from R/3. When i debug BADI all the info record and condition info is populated. Once the control leaves the BADI standard SAP code is not inserting/updating delta condition records. It is only populating latest info record.
 SRM 4.0
 Support pack level : 11
 BADI Name: PRODUCT_CUSTOMER2
 Method Name: MAP_R3_TO_CRM_MATERIAL
 Conditions Populated in structure : COMT_PROD_SERVICE_BDOC- CONDITIONS-CND_BBP_WORKING_SET.
Thanks in Advance,
Vineela.

Hi
Please go through this ->
Note 715213 Interface change in BAdIs in Release SRM 4.0
Note 689135 Conditions are not downloaded when product is updated in R/3
Note 534899 - Inconsistencies in the Content Workbench
Note 420343 - TIP: Backend price transfer in product conditions
Note 459640 - Category error when transferring backend prices with report
Note 415839 - Removing errors in external product interface
For pricing condition type, go to the SAP Help links
http://help.sap.com/saphelp_srm30/helpdata/en/72/f40f3c98ddaa4ce10000000a11402f/content.htm
and also
http://help.sap.com/saphelp_srm30/helpdata/en/ee/d9df3bbcce4b37e10000000a114084/content.htm
Do you use IPC for pricing? I am not sure whether you can use R/3 4.6C with SRM5.5. Check your systems. Refer SAP notes 539720 if you are using simplified pricing (Classic scenario).
Also check for SAP OSS Notes - 394975 and 420343
Update of price in srm is possible through the SAP OSS Note 420343. This note describes an option to transfer a price from the Backend via a report and a BADI and to store this price in the condition table of the corresponding product in the EBP. But you have to do small changes,i think this note will certainly helps you to transfer material master prices to srm product master automatically.
Update Price in SRM 5.5 Automatically using report - EBP_GET_BACKEND_PRICES
Re: Update Price in SRM 5.5 Automatically using report EBP_GET_BACKEND_PRICES
Condition Type SRM - ECC
Re: Condition Type SRM - ECC
Re: Replicating additional fields (R/3 4.7) to SRM product master
Transfer Inforecord Conditions Scales to SRM Product Master
Hope this will help.
Regards
- Atul

Material Replication from ECC to SRM 7.0

Hi Experts,
I am working on Extended classic scenario SRM 7.0 with ECC 6.0, I have created the Material Group and Master data in ECC system. While doing replication via R3AS i am getting the following error msg( I have applied Note 720819 & 330401in ECC ).
Errors:
Hierarchy for material types does not exist
(Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).)
MATERIAL: Object will not be loaded
Pl do the needful.
Regards
Mohan

Hi Pl check whether you follwed these steps are not.
Hi find below for the product cat
Steps to create the product category in SRM:
1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3) Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

Material replication from ECC to SRM

Dear SRM 7.0 Experts,
We are implementimg SRM 7.0 and we are trying to execute the Initial Load of materials into SRM 7 from ECC. We have completed all the Middleware settings and all the customising required for material replication. Whe we run the initial load (tcode R3AS) and select the first object DNL_CUST_BASIS3, it runs but the status remains "Running" in R3AM1. There is no errors in SMQ1as the entry runs and completes and therefore disappears. There is no errors recorded in SMW0 or SLG1 either. What could be the problem?
I checked in SMQ1 & SMQ2 as well, but there is no entries here for the object DNL_CUST_BASIS3. what we can do to resolve the issue ?
Regds,
Cb

Have you checked the outbound queue in backend R/3 system ?
Have you defined the additional user in CRMCONSUM table apart from the CRM user?
Verify and, if necessary, change or insert entries in tables CRMCONSUM and CRMRFCPAR as
described in SAP Note 430980. See also SAP Note 720819.
Hope this helps you.
Regards
Abhijeet

Material Replication from ERP to MDM (SRM-MDM Catalog)

Hi Experts,
I would like to replicate the material master from the ERP system into the MDM (SRM-MDM Catalog)?
I don't want to replicate the materials from ERP to SRM, and then from SRM to MDM.
1. Does ERP provide any transactions to achieve this ( like MECCM / MDM_CLNT_EXTR) ?
2. Is there a necessity to use the PI system in these communications? If so, what Integration Scenario I need to use in PI Enterprise Repository?
3. Any further changes to Materials in the ERP system should automatically replicate into the MDM system.
From SRM, I create SC with items from Materials in MDM.
Please let me know if you require more information.
Thanks
Kasee

Dear Krupa,
Thank you for your quick reply.
So we should consider the scenario where SRM is the central repository for the contracts, and all the changes done in SRM should be replicated to ERP.
In this scenario, do you know which steps should be done to allow contract replication from SRM to ERP? I already created a central contract in SRM but there is no message sent to PI.
Thanks in advance.
Regards,
Andreia

SRM 7.0 - CRM middleware settigns for material replication

Hello SRM Guru's
Can you please provide me detail step by step process of CRM middleware settings for material replication from ECC 6.0 SRM 7.0?
Thanks.
Regards,
Magesh.

Hi,
Configuration Guides are available in SAP Solution Manager Server. Downloaded offline version is also available in SAP Service Marketplace. http://service.sap.com/srm-inst
Please check a good blog by Marcin Gajewski. /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
SDN has search functions. You can find solutions for your issue.
Regards,
Masa

Material replication errors - SRM 5.0

Similar Messages

Maybe you are looking for