Material Replication from Backend: DNL_CUST_PROD0 is stuck in SMQ2

Hi Experts,
I am getting this error while running R3AS for DNL_CUST_PROD0 adapter and checking the SMQ2 is getting into SYSFAIL status. The detail error says "Incorrect parameter with CALL FUNCTION" for Function Module BAPI_CRM_SAVE
Even, adapter DNL_CUST_PROD1, is getting SYSFAIL error in SMQ1. The detail error is Filter criteria Invalid on function module CRS_FIRST_DOWNLOAD_TRIGGER
Please suggest
Thanks
Rakesh

Hi
Here is the possible solution. Ii was facing this issue however was able to do.
First goto SMOEAC and check wheather CRM is connected with correct site attribute or not.
Then check all the RFC connection.
delete all the existing queues and R3AM1
now goto R3ac3
refresh all the Load and try again i Hope it should work and also maintain
system landscape in technical basic setting in SRM GUI(SPRO)
Regards
saurabh

Similar Messages

Problem on Material Replication from R/3 to EBP

Hi friends,
I am having a problem on Material replication from R/3 to EBP. I had configured all the required settings in EBP as well as in R/3. Whenever we are starting initial loading R3AS I am getting outbound queues in EBP instead of R/3. I am getting the error like 'The current application triggered a termination'. I could able to replicate Vendor and Locations from R/3 to EBP. If anybody can solve this problem.
Thanx in advance.
Raj

Hi Ahmed,
Could you please elaborate. I am getting runtime error as 'Message_Type_X' (The current application triggered as termination with a short dump).
Thanks
Raj

Vendor and Material Replication from ECC6 Ehp7 to SRM7.0

Hi Experts,
I am facing an issue with replicating Material and Vendor Master from ECC to SRM system.
ECC system - ECC6.0 Ehp 7 & SRM system - SRM7.0
Middleware setting is done as per Note 720819 and performed the object like DNL_CUST_BASIS3 , DNL_CUST_PROD0, DNL_CUST_PROD1 and found Sucess in SRM R3AM1.
Errors :
1. Material Replication Error in SMW01
Mat. for Initial Download: Table not supported by function
Alternative units of measure are inconsistent; correct the values COM_PRODUCT_UNIT COMM_PR_UNIT
Alternative units of measure are inconsistent; correct the values
Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.
2. Vendor Replication Error in BBPGETVD
Backend systems with Release 740 are not supported
Message no. BBP_BUPA002
What are all the compatabilty issues will be faced connecting SAP ECC6 Ehp7 with SRM7.0? Can any one list down.
Please Suggest the valuable comments to resolve the problem as earliest.
Thanks & Regards,
Ramprakash N

Dear Ramprakash,
Please check below URL for #1.
Alternative units of measure are inconsistent; correct the values in SMW01
Please find the following note which might help you for issue #2.
1313972
1349825
1372175
Thanks
Shuvrajyoti

Overwriting Conditions data during Material Replication from R/3 to SRM.

Hi,
 When creating a new info record and then running the material replication program everything looks OK. However, if for the same material you create a new info record or change the existing info record and then run the material replication, some of the previous data is removed.
 We implemented BADI(PRODUCT_CUSTOMER2) to read info records from R/3. When i debug BADI all the info record and condition info is populated. Once the control leaves the BADI standard SAP code is not inserting/updating delta condition records. It is only populating latest info record.
 SRM 4.0
 Support pack level : 11
 BADI Name: PRODUCT_CUSTOMER2
 Method Name: MAP_R3_TO_CRM_MATERIAL
 Conditions Populated in structure : COMT_PROD_SERVICE_BDOC- CONDITIONS-CND_BBP_WORKING_SET.
Thanks in Advance,
Vineela.

Hi
Please go through this ->
Note 715213 Interface change in BAdIs in Release SRM 4.0
Note 689135 Conditions are not downloaded when product is updated in R/3
Note 534899 - Inconsistencies in the Content Workbench
Note 420343 - TIP: Backend price transfer in product conditions
Note 459640 - Category error when transferring backend prices with report
Note 415839 - Removing errors in external product interface
For pricing condition type, go to the SAP Help links
http://help.sap.com/saphelp_srm30/helpdata/en/72/f40f3c98ddaa4ce10000000a11402f/content.htm
and also
http://help.sap.com/saphelp_srm30/helpdata/en/ee/d9df3bbcce4b37e10000000a114084/content.htm
Do you use IPC for pricing? I am not sure whether you can use R/3 4.6C with SRM5.5. Check your systems. Refer SAP notes 539720 if you are using simplified pricing (Classic scenario).
Also check for SAP OSS Notes - 394975 and 420343
Update of price in srm is possible through the SAP OSS Note 420343. This note describes an option to transfer a price from the Backend via a report and a BADI and to store this price in the condition table of the corresponding product in the EBP. But you have to do small changes,i think this note will certainly helps you to transfer material master prices to srm product master automatically.
Update Price in SRM 5.5 Automatically using report - EBP_GET_BACKEND_PRICES
Re: Update Price in SRM 5.5 Automatically using report EBP_GET_BACKEND_PRICES
Condition Type SRM - ECC
Re: Condition Type SRM - ECC
Re: Replicating additional fields (R/3 4.7) to SRM product master
Transfer Inforecord Conditions Scales to SRM Product Master
Hope this will help.
Regards
- Atul

Material replication from ECC to SRM

Dear SRM 7.0 Experts,
We are implementimg SRM 7.0 and we are trying to execute the Initial Load of materials into SRM 7 from ECC. We have completed all the Middleware settings and all the customising required for material replication. Whe we run the initial load (tcode R3AS) and select the first object DNL_CUST_BASIS3, it runs but the status remains "Running" in R3AM1. There is no errors in SMQ1as the entry runs and completes and therefore disappears. There is no errors recorded in SMW0 or SLG1 either. What could be the problem?
I checked in SMQ1 & SMQ2 as well, but there is no entries here for the object DNL_CUST_BASIS3. what we can do to resolve the issue ?
Regds,
Cb

Have you checked the outbound queue in backend R/3 system ?
Have you defined the additional user in CRMCONSUM table apart from the CRM user?
Verify and, if necessary, change or insert entries in tables CRMCONSUM and CRMRFCPAR as
described in SAP Note 430980. See also SAP Note 720819.
Hope this helps you.
Regards
Abhijeet

Problems during material replication from SRM 5.0 to ECC 6.0

Hello all,
I tried to replicate material master from ECC to SRM but i am not successful.
System can able to replicate all the product categories but not the material.
System showing the process is done and it is showing green light when i drilldown.
Can any one ever had experienced such a problem?
Thank you
mahesh

Hi
Please go through this ->
Note 884208 - Unusable Middleware objects are provided
Note 872533 - FAQ - Middleware
As mentioned in SAP OSS note 872533, DNL_CUST_BASIS3 is obsolete, therefore, Please skip the download of the object DNL_CUST_BASIS3 and continue with DNL_CUST_PROD0, DNL_CUST_PROD1 and MATERIAL.
Following OSS note 872533, DNL_CUST_BASIS3 is obsolete.(Though OSS note mention DNL_CUST BASIS3 is obsolete for SRM 5.0, However, this customizing object does help in synchronizing the UOM from R/3 to SRM.)
However, it seems to still work in SRM50...
Related link ->
Re: UNIT OF MEASAUREMENT
As an alternative :
For ISO codes synchronisation, you can go to transaction CUNI -> ISO and then select "utilities" -> "adjustment".
A pop-up will be displayed to select the backend code
Do let me know.
Regards
- Atul

Material replication from R/3 to SRM - Issue with Material group

Hello All,
                  I am working on BADI PRODUCT_CUSTOMER2 and method MAP_R3_TO_CRM_MATERIALMaterial replication part from R/3 to SRM.
I am using a Ztable to map r/3 material group to SRM material group(Product category).
For example Material M1 with material group 100 is transferred to SRM. Material group(Product category) 100 exist in SRM, but I am changing the material group to 200 in the product_customer2 badi. its working fine.
In another scenario, Material with material M1 with material group 300. Material group(product category) 300 does not exist in SRM,
I am changing the material group to 200 in the bdoc, in the product_customer2 badi. It is not working. The LUW is failing in SMQ2 transaction with the error "Error in Mapping (Details: transaction SMW01)". The BDOC is failing with error "Category for material group 300 does not exist"
I tried to deactivate the badi PRODUCT_CUSTOMER2, even then the FM MAP_BAPIMTCS_AND_PROCESS is validating the material group from R/3.
I tried to change the material group 300 to the existing material group 200 at initial stage in debugging in function module MAP_BAPIMTCS_AND_PROCESS but still the bdoc is failing with error "No storage form defined for product type 01 / logical system".
I am doing my testing using the following steps.
1. change the material descriptioni in MM02 in R/3.
2. An item is displayed in the queue in SMQ2 in SRM.
3. I have debugged the LUW and analyzed my badi by setting breakpoint at method MAP_R3_TO_CRM_MATERIAL, its changing the material group in the bdoc properly.
   that didnt work.
   also i tried to change the material group in the function module MAP_BAPIMTCS_AND_PROCESS before the badi is called.
4. I am checking the BDOc status using tcode SMW01 and checking the material using tcode COMMPR01.
can someone tell me how I can change the R/3 material group to SRM material group at the time of mapping in SRM?
Thanks
Sathish PM

Hi find below for the product cat
Steps to create the product category in SRM:
1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3) Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

Material Replication from ECC to SRM 7.0

Hi Experts,
I am working on Extended classic scenario SRM 7.0 with ECC 6.0, I have created the Material Group and Master data in ECC system. While doing replication via R3AS i am getting the following error msg( I have applied Note 720819 & 330401in ECC ).
Errors:
Hierarchy for material types does not exist
(Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).)
MATERIAL: Object will not be loaded
Pl do the needful.
Regards
Mohan

Hi Pl check whether you follwed these steps are not.
Hi find below for the product cat
Steps to create the product category in SRM:
1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3) Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

Material Replication from ERP to MDM (SRM-MDM Catalog)

Hi Experts,
I would like to replicate the material master from the ERP system into the MDM (SRM-MDM Catalog)?
I don't want to replicate the materials from ERP to SRM, and then from SRM to MDM.
1. Does ERP provide any transactions to achieve this ( like MECCM / MDM_CLNT_EXTR) ?
2. Is there a necessity to use the PI system in these communications? If so, what Integration Scenario I need to use in PI Enterprise Repository?
3. Any further changes to Materials in the ERP system should automatically replicate into the MDM system.
From SRM, I create SC with items from Materials in MDM.
Please let me know if you require more information.
Thanks
Kasee

Dear Krupa,
Thank you for your quick reply.
So we should consider the scenario where SRM is the central repository for the contracts, and all the changes done in SRM should be replicated to ERP.
In this scenario, do you know which steps should be done to allow contract replication from SRM to ERP? I already created a central contract in SRM but there is no message sent to PI.
Thanks in advance.
Regards,
Andreia

Material Replication from R/3 to SRM - Object status stuck in Running mode

Hi Experts, I am new to this Forum and I am facing the following issue,
System Info :
SRM 5.0
ECC 6.0
I am trying to replicate two materials from the backend R/3 system and have set material filters on the SRM side.
The filters are Table: MARA, Field: MATNR, OP= Equality(=low), LOW = T-SRM13, inclusive defined.
The filters are Table: MARA, Field: MATNR, OP= Equality(=low), LOW = T-SRM113, inclusive defined.
This is my sequence of operations in SRM:
I deleted exisiting queues, started initial load and then activated the inbound Queues for my client.
Then when checking, Monitor Load objects in SRM, the status for Material is stuck in Running mode with an yellow sign.
Please let me know if you have any advice.

Hello,
First of all, check RFC queues in transatcion SMQ1 and SMQ2 for any detailed information.
Make sure if Your RFC user has SAP_ALL authorisation - if not add it and delete all material queues and run again.
Make shure if You run report BBP_PRODUCT_SETTINGS_MW with proper option and unchecked "Test mode". Once you have done this rerun your initial load for DNL_CUST_PROD0, DNL_CUST_PROD1, BASIS3 and MATERIAL.
Regards,
Marcin Gajewski
Please reward points for helpful answers.

Material Replication from Multiple R/3 System to SRM

Hi,
Please help me reagrding the below error.....!
I am trying to replicate material from two backend (r/3) systems, i am getting an error (Exception condition "LOGSYS_FOR_GUID_CHANGED" raised.).
Regards,
Nish Kel

Hi
Check the note 765018.
In case of multiple backends and also if systems are refreshed with other instances (client copy), the logical system ID will be changed.
So we need to run the report mentioned in the said note and run the replication.
Rgds
Reddy

XI Integration scenario for material replication from SRM to SRM-MDM

Hi Guys,
We are working with the following landscape:
SRM Server 5.5
ECC 6.0
SRM-MDM 5.5 SP6
PI 2005_1_700 SP0006
I have a question for you about replication of the material master form SRM EBP to SRM-MDM.
In XI we are trying to configure this scenario. For this we have imported the following XI Content:
- SAP SRM Server 5.5
- SAP SRM-MDM 2.0
We have the following problem; that when tring to configure the this scenario we are getting GUID errors. Probable because some XI content is missing. In the SRM-MDM 2.0 XI content we also see that SRM 6.0 scenario's are avilable in the currenlty imported XI content, but when clicking on 'Edit action' in these scenario's we are getting the following error:
"Software component version with GUID XXXXXXXXXX... does not exists"
Can any one tell me why SRM 6.0 scenario's are availble in the XI content for SRM-MDM 2.0, and which additional XI content we need to import to get rid of these GUID error's?
Becasue of this the configuration in the Integration Directory fails.Transfering the integration scenario to the Integration directory gives a couple of errors: "Unable to load action. Check whether all necessary actions have been released in the integration repository".
Hopefully some of you know what to do, because I am currenlty stuck....... Do we need to import additional XI content, or maybe the Xi content for SRM 6.0. If so where can I get the XI content for SRM 6.0. It is not available on the SAP Support portal as a download.
Thx In advance.
Regards,
Wouter

Hi,
>"Software component version with GUID XXXXXXXXXX... does not exists"
try updating SLD (CIM DATA) with the latest patch available
Regards,
Michal KRawczyk

Set_types - Replication from Backend to SRM

Hi all SRM Gurus!
I have this specific problem:
Material Type FERT have been replicated to SRM. For the time of the replication the type didn't include the purchasing view, as it was not intended for purchase.
Now the business wants to make it possible to use the FERT type for purchasing, and therefore the purchasing view has been configured and added on the R3 side. But - when I replicate the product categories, I dont get the Set_type for purchasing in COMM_HIERARCHY. I can add it manually, but this is, from my perspective, not the right way to do it.
Can anyone help me?
Best Regards
Maria

Hi
As per my undesrtanding, Replicating Material Configuration data from R/3 does not seems to be a good approach at all.
You need to replicate only the Product hierachies (using tcode - COMM_HIEARACHY) in SRM.
Let me know your exact requirements behind this, why you taken this approach ?
What type of EBP scenario you are currently into ? Which SAP Version ?
Regards
- Atul

Material Replication from ECC 6.0 to SRM 7.0 (PPS)

Hi,
I am working on SRM 7.0 (PPS) classic senerio and ECC 6.0.
I am trying for delta download regarding Product Masters but i m not able to get success.
ERROR "Exception condition "GUIDFOR_LOGSYS_CHANGED" rais"_
Please help.
Sumit.

Hi,
This is because the Log system entry in your ECC system has been changed after the first time it was setup.
Kindly refer note 765018 to resolve your error.
Regards,
Nikhil

Material Replication still running

Hello,
I checked SMQ1 and SMQ2 in SRM and in my backend and those table are empty.
I set a filter and launch my material replication, but it still running for long long time. it is not normal and i don't know why...can you help me?

Hi
Which SRM and R/3 versions are you using ?
Please go through these links, which deal with the same scenario ->
Material not downloaded from R/3
Material Replication from R/3 to SRM - Object status stuck in Running mode
DNL_CUST_BASIS3 still running
Re: Inbound Queue not visible in SMQ2, after starting Material replication
SRM Middleware Replication - Initial Download Failure
materail gruops replication
Problems using R3AR4
Downloading material from R/3
set filter in R3AC1 for material master
Replication product and service masters
Re: Deleting some replicated materials from SRM
Replication problem in 5.0
Hope this will help.
Regards
- Atul

Material Replication from Backend: DNL_CUST_PROD0 is stuck in SMQ2

Similar Messages

Maybe you are looking for