Material Replication from Multiple R/3 System to SRM

Hi,
Please help me reagrding the below error.....!
I am trying to replicate material from two backend (r/3) systems, i am getting an error (Exception condition "LOGSYS_FOR_GUID_CHANGED" raised.).
Regards,
Nish Kel

Hi
Check the note 765018.
In case of multiple backends and also if systems are refreshed with other instances (client copy), the logical system ID will be changed.
So we need to run the report mentioned in the said note and run the replication.
Rgds
Reddy

Similar Messages

N:1 replication from multiple ERP source systems on different EHP levels

Hello,
The situation is that the customer has multiple ERP systems on different EHP levels. Therefore, in newer EHP systems, some tables will have different structure (additional columns). The intention is to setup N:1 replication into one target DB schema
Would this be possible to support/setup in SLT ? How would the different table structure be handled?
Thanks and best regards,
Cosmin

Hi Cosmin,
I think this can be achieved. First of all you have to investigate which structures are available for the different releases. At the and the target structure has to consist of all available fields with the same name.
Before oyu start with the replication you have to specify the same target structure for all configuration.
What SLT is doing during the mapping from the source structure to the target structure is a "move-corresponding" command. So it is important that the names of the fields are the same. At the end you will have sometimes fields filled, sometimes not (depending if this field is in the source filled).
Let me know if you need further input.
Best,
Tobias

Problem on Material Replication from R/3 to EBP

Hi friends,
I am having a problem on Material replication from R/3 to EBP. I had configured all the required settings in EBP as well as in R/3. Whenever we are starting initial loading R3AS I am getting outbound queues in EBP instead of R/3. I am getting the error like 'The current application triggered a termination'. I could able to replicate Vendor and Locations from R/3 to EBP. If anybody can solve this problem.
Thanx in advance.
Raj

Hi Ahmed,
Could you please elaborate. I am getting runtime error as 'Message_Type_X' (The current application triggered as termination with a short dump).
Thanks
Raj

Replication from Multiple HR systems

Hi SRM Gurus,
has anyone ever had the requirement to replicate HR data (Org, Positions, Central Persons) from more than one HR system?
At the first glance, I technically do not see why it should not be possible. Setting up the ALE distribution modell on multiple HR backends and processing the docs should work, shouldn't it?
Any ideas, suggestions, hints, reads, practical experience for me?
Thanks in advance and best Regards, Udo

Hi
Yes. As long as you maintain separate distribution model for each client, you can distribute the same content to 'N' receiving systems.
Message type used is HRMD_ABA.
Note 497557 - HR integration: Multiple organiz. assignment change, user li
Note 637221 - RHINTE00: Old holder relationships are not delimited
Note 437775 - HR-BBP/CRM integration: User links are delimited
There is also a document called TRANSPORTING_EBP_14.pdf in http://service.sap.com
Use the search engine to find this official document.
Please check OSS notes 550055 et 934372 that explain everything.
Please check OSS note 945523 for BP duplication
The program to run from R3 is rhaleini, you'll find more information about this replication in note 312090.
Did you already read OSS note 588701 "Change of the logical system name in R/3 Backend system " ?
Also Check the note 765018. In case of multiple backends and also if systems are refreshed with other instances (client copy), the logical system ID will be changed. So we need to run the report mentioned in the said note and run the replication.
Please check the note 934372 SRM/CRM: HR integration for business partner - new. or post the specific problem.
Related links ->
The specified item was not found.
HR Master Date replication from HR to SRM
Re: Multiple Backends
HR integration with SRM
HR replication
Re: Multiple Backends Connected to the same SRM client.
R/3 to SRM
Employee Org and Personnel Data from HR
Re: SRM intregation with HR
Business Partner(BP) and Central Person(CP) distribution
SRM and HR integration
Re: HR_Master Data to SRM
HR Organisation unit replication
Re: SRM organization plan...
Hope this will definitely help. Do let me know.
Regards
- Atul

Material replication from R/3 to SRM - Issue with Material group

Hello All,
                  I am working on BADI PRODUCT_CUSTOMER2 and method MAP_R3_TO_CRM_MATERIALMaterial replication part from R/3 to SRM.
I am using a Ztable to map r/3 material group to SRM material group(Product category).
For example Material M1 with material group 100 is transferred to SRM. Material group(Product category) 100 exist in SRM, but I am changing the material group to 200 in the product_customer2 badi. its working fine.
In another scenario, Material with material M1 with material group 300. Material group(product category) 300 does not exist in SRM,
I am changing the material group to 200 in the bdoc, in the product_customer2 badi. It is not working. The LUW is failing in SMQ2 transaction with the error "Error in Mapping (Details: transaction SMW01)". The BDOC is failing with error "Category for material group 300 does not exist"
I tried to deactivate the badi PRODUCT_CUSTOMER2, even then the FM MAP_BAPIMTCS_AND_PROCESS is validating the material group from R/3.
I tried to change the material group 300 to the existing material group 200 at initial stage in debugging in function module MAP_BAPIMTCS_AND_PROCESS but still the bdoc is failing with error "No storage form defined for product type 01 / logical system".
I am doing my testing using the following steps.
1. change the material descriptioni in MM02 in R/3.
2. An item is displayed in the queue in SMQ2 in SRM.
3. I have debugged the LUW and analyzed my badi by setting breakpoint at method MAP_R3_TO_CRM_MATERIAL, its changing the material group in the bdoc properly.
   that didnt work.
   also i tried to change the material group in the function module MAP_BAPIMTCS_AND_PROCESS before the badi is called.
4. I am checking the BDOc status using tcode SMW01 and checking the material using tcode COMMPR01.
can someone tell me how I can change the R/3 material group to SRM material group at the time of mapping in SRM?
Thanks
Sathish PM

Hi find below for the product cat
Steps to create the product category in SRM:
1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3) Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

Overwriting Conditions data during Material Replication from R/3 to SRM.

Hi,
 When creating a new info record and then running the material replication program everything looks OK. However, if for the same material you create a new info record or change the existing info record and then run the material replication, some of the previous data is removed.
 We implemented BADI(PRODUCT_CUSTOMER2) to read info records from R/3. When i debug BADI all the info record and condition info is populated. Once the control leaves the BADI standard SAP code is not inserting/updating delta condition records. It is only populating latest info record.
 SRM 4.0
 Support pack level : 11
 BADI Name: PRODUCT_CUSTOMER2
 Method Name: MAP_R3_TO_CRM_MATERIAL
 Conditions Populated in structure : COMT_PROD_SERVICE_BDOC- CONDITIONS-CND_BBP_WORKING_SET.
Thanks in Advance,
Vineela.

Hi
Please go through this ->
Note 715213 Interface change in BAdIs in Release SRM 4.0
Note 689135 Conditions are not downloaded when product is updated in R/3
Note 534899 - Inconsistencies in the Content Workbench
Note 420343 - TIP: Backend price transfer in product conditions
Note 459640 - Category error when transferring backend prices with report
Note 415839 - Removing errors in external product interface
For pricing condition type, go to the SAP Help links
http://help.sap.com/saphelp_srm30/helpdata/en/72/f40f3c98ddaa4ce10000000a11402f/content.htm
and also
http://help.sap.com/saphelp_srm30/helpdata/en/ee/d9df3bbcce4b37e10000000a114084/content.htm
Do you use IPC for pricing? I am not sure whether you can use R/3 4.6C with SRM5.5. Check your systems. Refer SAP notes 539720 if you are using simplified pricing (Classic scenario).
Also check for SAP OSS Notes - 394975 and 420343
Update of price in srm is possible through the SAP OSS Note 420343. This note describes an option to transfer a price from the Backend via a report and a BADI and to store this price in the condition table of the corresponding product in the EBP. But you have to do small changes,i think this note will certainly helps you to transfer material master prices to srm product master automatically.
Update Price in SRM 5.5 Automatically using report - EBP_GET_BACKEND_PRICES
Re: Update Price in SRM 5.5 Automatically using report EBP_GET_BACKEND_PRICES
Condition Type SRM - ECC
Re: Condition Type SRM - ECC
Re: Replicating additional fields (R/3 4.7) to SRM product master
Transfer Inforecord Conditions Scales to SRM Product Master
Hope this will help.
Regards
- Atul

Vendor and Material Replication from ECC6 Ehp7 to SRM7.0

Hi Experts,
I am facing an issue with replicating Material and Vendor Master from ECC to SRM system.
ECC system - ECC6.0 Ehp 7 & SRM system - SRM7.0
Middleware setting is done as per Note 720819 and performed the object like DNL_CUST_BASIS3 , DNL_CUST_PROD0, DNL_CUST_PROD1 and found Sucess in SRM R3AM1.
Errors :
1. Material Replication Error in SMW01
Mat. for Initial Download: Table not supported by function
Alternative units of measure are inconsistent; correct the values COM_PRODUCT_UNIT COMM_PR_UNIT
Alternative units of measure are inconsistent; correct the values
Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.
2. Vendor Replication Error in BBPGETVD
Backend systems with Release 740 are not supported
Message no. BBP_BUPA002
What are all the compatabilty issues will be faced connecting SAP ECC6 Ehp7 with SRM7.0? Can any one list down.
Please Suggest the valuable comments to resolve the problem as earliest.
Thanks & Regards,
Ramprakash N

Dear Ramprakash,
Please check below URL for #1.
Alternative units of measure are inconsistent; correct the values in SMW01
Please find the following note which might help you for issue #2.
1313972
1349825
1372175
Thanks
Shuvrajyoti

Material Replication from ECC to SRM 7.0

Hi Experts,
I am working on Extended classic scenario SRM 7.0 with ECC 6.0, I have created the Material Group and Master data in ECC system. While doing replication via R3AS i am getting the following error msg( I have applied Note 720819 & 330401in ECC ).
Errors:
Hierarchy for material types does not exist
(Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).)
MATERIAL: Object will not be loaded
Pl do the needful.
Regards
Mohan

Hi Pl check whether you follwed these steps are not.
Hi find below for the product cat
Steps to create the product category in SRM:
1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3) Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

Material replication from ECC to SRM

Dear SRM 7.0 Experts,
We are implementimg SRM 7.0 and we are trying to execute the Initial Load of materials into SRM 7 from ECC. We have completed all the Middleware settings and all the customising required for material replication. Whe we run the initial load (tcode R3AS) and select the first object DNL_CUST_BASIS3, it runs but the status remains "Running" in R3AM1. There is no errors in SMQ1as the entry runs and completes and therefore disappears. There is no errors recorded in SMW0 or SLG1 either. What could be the problem?
I checked in SMQ1 & SMQ2 as well, but there is no entries here for the object DNL_CUST_BASIS3. what we can do to resolve the issue ?
Regds,
Cb

Have you checked the outbound queue in backend R/3 system ?
Have you defined the additional user in CRMCONSUM table apart from the CRM user?
Verify and, if necessary, change or insert entries in tables CRMCONSUM and CRMRFCPAR as
described in SAP Note 430980. See also SAP Note 720819.
Hope this helps you.
Regards
Abhijeet

Material Replication from ERP to MDM (SRM-MDM Catalog)

Hi Experts,
I would like to replicate the material master from the ERP system into the MDM (SRM-MDM Catalog)?
I don't want to replicate the materials from ERP to SRM, and then from SRM to MDM.
1. Does ERP provide any transactions to achieve this ( like MECCM / MDM_CLNT_EXTR) ?
2. Is there a necessity to use the PI system in these communications? If so, what Integration Scenario I need to use in PI Enterprise Repository?
3. Any further changes to Materials in the ERP system should automatically replicate into the MDM system.
From SRM, I create SC with items from Materials in MDM.
Please let me know if you require more information.
Thanks
Kasee

Dear Krupa,
Thank you for your quick reply.
So we should consider the scenario where SRM is the central repository for the contracts, and all the changes done in SRM should be replicated to ERP.
In this scenario, do you know which steps should be done to allow contract replication from SRM to ERP? I already created a central contract in SRM but there is no message sent to PI.
Thanks in advance.
Regards,
Andreia

Material Replication from R/3 to SRM - Object status stuck in Running mode

Hi Experts, I am new to this Forum and I am facing the following issue,
System Info :
SRM 5.0
ECC 6.0
I am trying to replicate two materials from the backend R/3 system and have set material filters on the SRM side.
The filters are Table: MARA, Field: MATNR, OP= Equality(=low), LOW = T-SRM13, inclusive defined.
The filters are Table: MARA, Field: MATNR, OP= Equality(=low), LOW = T-SRM113, inclusive defined.
This is my sequence of operations in SRM:
I deleted exisiting queues, started initial load and then activated the inbound Queues for my client.
Then when checking, Monitor Load objects in SRM, the status for Material is stuck in Running mode with an yellow sign.
Please let me know if you have any advice.

Hello,
First of all, check RFC queues in transatcion SMQ1 and SMQ2 for any detailed information.
Make sure if Your RFC user has SAP_ALL authorisation - if not add it and delete all material queues and run again.
Make shure if You run report BBP_PRODUCT_SETTINGS_MW with proper option and unchecked "Test mode". Once you have done this rerun your initial load for DNL_CUST_PROD0, DNL_CUST_PROD1, BASIS3 and MATERIAL.
Regards,
Marcin Gajewski
Please reward points for helpful answers.

Problems during material replication from SRM 5.0 to ECC 6.0

Hello all,
I tried to replicate material master from ECC to SRM but i am not successful.
System can able to replicate all the product categories but not the material.
System showing the process is done and it is showing green light when i drilldown.
Can any one ever had experienced such a problem?
Thank you
mahesh

Hi
Please go through this ->
Note 884208 - Unusable Middleware objects are provided
Note 872533 - FAQ - Middleware
As mentioned in SAP OSS note 872533, DNL_CUST_BASIS3 is obsolete, therefore, Please skip the download of the object DNL_CUST_BASIS3 and continue with DNL_CUST_PROD0, DNL_CUST_PROD1 and MATERIAL.
Following OSS note 872533, DNL_CUST_BASIS3 is obsolete.(Though OSS note mention DNL_CUST BASIS3 is obsolete for SRM 5.0, However, this customizing object does help in synchronizing the UOM from R/3 to SRM.)
However, it seems to still work in SRM50...
Related link ->
Re: UNIT OF MEASAUREMENT
As an alternative :
For ISO codes synchronisation, you can go to transaction CUNI -> ISO and then select "utilities" -> "adjustment".
A pop-up will be displayed to select the backend code
Do let me know.
Regards
- Atul

ODSEE 7 - 11.1.1.3.0 Replication from multiple masters(not multimaster) into one consumer (into same DIT)

Hi All,
Would you be able to help me regarding a replication question?
We have an existing LDAP topology where we maintain masters and consumers.
We have a request to expose (if it is possible) an additional suffixes into the current DIT on consumer side.
Here is the situation :
What do you think? is it possible to do this way?
The goal is to get the objects from ou=europe and ou=us and from ou=company as well when the search is on the ou=company,dc=example,dc=com with scope =2 (subtree)
Thank you for your help
regards
Laszlo

Hi Laszlo,
thank you for the additional clarification; in that scenario, adding the two sub-suffixes and creating the replication from the other masters (ou=europe and ou=us) shouldn't be an issue, as long as you have created the same structure also the other masters.
Basically you could have on all the masters (company, europe and us) the root suffix which will always be: ou=company,dc=example,dc=com, then on the "europe" and "us" directories it will be just a kind of 'empty placeholder', whereas in the "company" directories will be fully populated:
Master "Company" 1 - root suffix: ou=company,dc=example,dc=com [This sub-suffix will contain the data and will be replicated]
Master "Company" 2 - root suffix: ou=company,dc=example,dc=com [This sub-suffix will contain the data and will be replicated]
Master "Europe" 1 - root suffix: ou=company,dc=example,dc=com [This suffix will remain mostly empty and not replicated]
Master "Europe" 1 - sub-suffix: ou=europe,ou=company,dc=example,dc=com [This sub-suffix will contain the data and will be replicated]
Master "Europe" 2 - root suffix: ou=company,dc=example,dc=com [This suffix will remain mostly empty and not replicated]
Master "Europe" 2 - sub-suffix: ou=europe,ou=company,dc=example,dc=com [This sub-suffix will contain the data and will be replicated]
Master "US" 1 - root suffix: ou=company,dc=example,dc=com [This suffix will remain mostly empty and not replicated]
Master "US" 1 - sub-suffix: ou=us,ou=company,dc=example,dc=com [This sub-suffix will contain the data and will be replicated]
Master "US" 2 - root suffix: ou=company,dc=example,dc=com [This suffix will remain mostly empty and not replicated]
Master "US" 2 - sub-suffix: ou=us,ou=company,dc=example,dc=com [This sub-suffix will contain the data and will be replicated]
Replication:
ou=company,dc=example,dc=com:
msco1 <---MMR--> msco2
msco1 ---> cons01, 02, ... 16
msco2 ---> cons01, 02, ... 16
ou=europe,ou=company,dc=example,dc=com
mseu1 <---MMR--> mseu2
mseu1 ---> cons01, 02, ... 16
mseu2 ---> cons01, 02, ... 16
ou=us,ou=company,dc=example,dc=com
msus1 <---MMR--> msus2
msus1 ---> cons01, 02, ... 16
msus2 ---> cons01, 02, ... 16
HTH,
marco

CIF from multiple R/3 systems

Hi,
I have the problem when CIF materials from two different R/3 systems. Used customer exit to prefix materials based on BSGs. The issue is that even materials are getting cretaed in MATMAP but some of materials are not getting created in MATKEY. Ther is no error message about missing entries. Does anyone have any idea how to bring those materials in MATKEY so that their material master will be created in APO.
Thanks in advance,
Siir

Hi Siir,
Please check whether the note "557164" is useful for your issue.
Regards,
Siva.

XI Integration scenario for material replication from SRM to SRM-MDM

Hi Guys,
We are working with the following landscape:
SRM Server 5.5
ECC 6.0
SRM-MDM 5.5 SP6
PI 2005_1_700 SP0006
I have a question for you about replication of the material master form SRM EBP to SRM-MDM.
In XI we are trying to configure this scenario. For this we have imported the following XI Content:
- SAP SRM Server 5.5
- SAP SRM-MDM 2.0
We have the following problem; that when tring to configure the this scenario we are getting GUID errors. Probable because some XI content is missing. In the SRM-MDM 2.0 XI content we also see that SRM 6.0 scenario's are avilable in the currenlty imported XI content, but when clicking on 'Edit action' in these scenario's we are getting the following error:
"Software component version with GUID XXXXXXXXXX... does not exists"
Can any one tell me why SRM 6.0 scenario's are availble in the XI content for SRM-MDM 2.0, and which additional XI content we need to import to get rid of these GUID error's?
Becasue of this the configuration in the Integration Directory fails.Transfering the integration scenario to the Integration directory gives a couple of errors: "Unable to load action. Check whether all necessary actions have been released in the integration repository".
Hopefully some of you know what to do, because I am currenlty stuck....... Do we need to import additional XI content, or maybe the Xi content for SRM 6.0. If so where can I get the XI content for SRM 6.0. It is not available on the SAP Support portal as a download.
Thx In advance.
Regards,
Wouter

Hi,
>"Software component version with GUID XXXXXXXXXX... does not exists"
try updating SLD (CIM DATA) with the latest patch available
Regards,
Michal KRawczyk

Material Replication from Multiple R/3 System to SRM

Similar Messages

Maybe you are looking for