Material Replication problem from SAP ECC to CRM 2007

I am trying to load material data from SAP to CRM. Materials are in general coming across however i have a lot of errors visible in smw01 with the following entries:
@0A@     BDoc validation error     PRODUCT_MAT     mBDoc Validate     06/04/2010     14:20:05     QAS100     R3AI_MATERIAL     MW_RFC_USER     DF6FDBE147AC2EF1B467002264F6091A
On closer examination i can see that the specific issue relates to teh following:
A key was used twice for multirow set type CRMM_PR_TAX
    Message no. COM_PRODUCT512
I can see on closer examination of the individual entries why the issue is occuring when i show the Bdoc message extra data I can see that there are multiple entries for CRMM_PR_TAX
CLI PRODUCT_GUID                     TAX TAX TAX_ TAX_GROUP            TAX_TARIFF_CODE T C VALID_FROM          VALID_TO            UPNAME       H LOGSYS
400 00000000000000000000000000000000 IE      MWST NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
I also note that the PRODUCT_GUID is blank 00000000000000000000000000000000 whic shouldn't be the case.
It's just not clear to me what i need to do to resolve the issue
Any help would be greatly appreciated
Regards
Eddie

Similar Messages

Vendor Number Range Conflict SAP ECC and CRM 2007

I need to load SAP ECC Vendor data from SAP to CRM and have setup most of the configuration as required. However I have an issue, the vendor number range used currently in our SAP system is already in use in our CRM system and has been for some time (for Prospects and Contacts). What is the best approach to dealing with this issue...
My initial thought was to see if we could have two different numbers for the same vendor in ECC and SAP CRM
eg SAP Vendor "50000001" equates to CRM "VEN50000001"
Is such as approach supported? Can you point me to the documentation that shows how such an approach could be implemented. What approaches have others done to address similar issues?
Thanks in advance
Eddie
By the way we are on CRM 2007 sp4

Hi Eddie,
SAP Note 1044637 - Customize Vendor Numbers
Implement the code present in the attachment. You can
change it according to your own requirements. The example code
suffixes 'VEND' before the first six digits of the vendor
number before it is downloaded to CRM.
Thanks,
Vaibhav Shah

Customer Replication problem from R/3 to CRM

The scenario is: We have upgraded R/3 to 4.7 and the logical system names have changed. CRM is still the same one ( 4.0 ).
Everything works fine. If I create an order it goes to R/3 and If I change an existing customer in CRM or R/3 it get replicated into the other system.
But if I create a new customer in R/3, it does not go to CRM.
All the tables are ok with the correct logical name and RFCs are working fine. Serial numbers are ok too and Delta download is active. I do not know what else I can check.
Did you have any similar situation? Any ideas of what I could check?
Any input is highly appreciated.
Thanks!

Hi Ankur & Michael
your points did help me to rectify the problem. here was another solution i did try and it worked out.My problem was in table CRMPAROLTP, in the field CONSUMER. It seems that 4.7 does not need to have this field filled. So I remove the entry and the information flows.
PS. I had awarded the points for both of you.
Thanks
SP

Extracting delta's with ODP-data source 0MATERIAL_ATTR from SAP ECC

We are using ODP-replication to extract data from SAP ECC to a MS SQL-database by SAP BusinessObjects Data Services.
For extracting Material-data we use the standard data source 0MATERIAL_ATTR in SAP ECC.
This data source delivers a full load with all Materials in it.
In the properties of this data source (tab attributes) we saw that this data source is Delta_Extractor_Capable.
Therefore we set the extraction mode from 'Query' to CDC (= Change Data Capable) and did a new initial load to get all Materials again.
After changing a Material in ECC, we did a delta-load, but unfortunately we received ZERO records.
Is there anyone with experience on extracting delta's with data source 0MATERIAL_ATTR or another standard masterdata data source in ECC?
Thank you for your reaction in advance,
Best regards,
Jan-Hendrik

Hi,
You can check the delta records in RSA3 see teh article. in https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Checking the Data using Extractor Checker (RSA3) in ECC Delta Repeat Delta etc...
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80f4c455-1dc2-2c10-f187-d264838f21b5&overridelayout=true
Data Flow from LBWQ/SMQ1 to RSA7 in ECC and Delta Extraction in BI
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/d-f/data%20flow%20from%20lbwq_smq1%20to%20rsa7%20in%20ecc%20and%20delta%20extraction%20in%20bi.pdf
Delete the Queue in LBWQ/RSA7 and then freshly load Init and Check the Delta.
Once you load the Init then if there are no new records then it won't get any data. so 0 records
Check in SM37 in ECC why the job is terminated. See in ST22 also.
Thanks
Reddy

Loading of transaction data from SAP ECC system failed

Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
Holger

Hi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much!

Transfer of data from SAP ECC 6.0 to E-Recruitment

Hi,
We are implementing E-recruitment . SAP ECC and E-Recruitment are running in different servers.How to transfer data from following Infotypes from SAP ECC 6.0 to E-Recruitment .
IT0002 Personal Data to 5102 Candidate Information
IT0006 Address Data to 5110 Address Rule
IT0105 Communication Data to 5110 Address Rule
IT0022 - Education to 5104 - Education
IT0023 Others/Previous Employers to 5103 - Work Experience
IT0024 - Qualifications to 5105 - Qualifications
Regards,
Somi .

Hello,
in general IT5103, 5104 and 5105 are not part of the standard distribution model. Without special customer own ALE development you will not be able to transfer these information.
Check SLG1 - application log for entries.
did you the initial data upload or did you only transfer changes?
If you did the initial data transfer be sure the user running the IDOC import has the correct rights. Be sure noone changed the usage of IT0000 STAT2 as e-recruiting expects value 3 for active employees. Furthermore be sure to be informed about the handling of hirings in future.
If you only wanted to transfer updates. PFAL is not the right way. Be sure you activated the change pointers correctly. Use RBDMIDOC. And be sure to implemet the latest Notes. There had been an error that changes were only processed in e-recruiting if at least IT0000, 0001 and 0002 were changed which resulted in problems when only IT 0006 was updated. In this case the update was not transfered to e-recruiting.
Best regards
Roman Weise

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

Data load from SAP ECC to SAP BI

Hello Gurus and Experts
I am new to BI and I m almost struggling to find a step by step process in loading data from SAP ECC to SAP BI through generic extractors from VBAK. The Problem is I can create an Infopackage for full update and loaded the records.(Lets say Upto this step 100 records are moved to PSA)
Then I create a sale order in ECC which is a new record that has to be transfered as delta record.
Now my questions are:
Am I correct if I moved the initial records into PSA with Full Mode InfoPackage?
Should I create another infopackage for delta records with Delta Mode or to change the update mode of the infopackage created earlier for Full Update mode?
Should I create a new infopackage every time to load the delta records?
Does separate DTP has to be created for Full and Delta updates?
Please dont be frustrated if my questions are pointless or childish
I would be glad if someone demonstrate the solutions in steps
Thanks in Advance
Karthik

Hi Ram,
I have followed all the steps mentioned by you, yet something is lagging in my end.
Let me lists the steps done by me and please correct me if i am wrong anywhere.
1. RSO2 in ECC..
2. Created DS with short, med and long names in SD application component for VBAK with all the fields unchecked in hide selection except document number, time of document, document date, net
value of the document and document currency.
3. mentioned a numeric pointer as Document number for delta and used new status for changed records.
3. saved the datasource. checked the newly created ds using the tcode RSA3.
4. Replicated the datasource under SD Application Component in BI and Activated it
6. Performed Transformations
7. created an Info Package with FULL UPDATE and executed. I got 6898 records in my PSA
6. Created DTP with DELTA. Saved and Executed it. Got 6898 records in my DSO
7. Created Info Package with INIT WITHOUT DATA TRANSFER and scheduled it.
8. Switched over to ECC and added a sale order
9. Created an InfoPackage with DELTA UPDATE and Scheduled it.
-----I didnt receive any records in my PSA
10. performed DTP.
---- I didnt received any new records in my DSO as my delta run is not working..
PS: I am using WO DSO
Please correct me if i am wrong anywhere
Thanks in advance
Karthik

Extraction from SAP ECC to SAP BI

What are the steps for Extraction from SAP ECC to SAP BI? Thanks.

Hi,
we have two types of extractions 1) Application specific 2)cross application
under applicatin specific -->we have customer genenrated and business content extractions
under customer generated means LIS, CO-PA, FI-SL(i.e no ready made data source in business content so we have to generate datasource)
Business content means there is ready made business content datasource so we can use it
LIS,LO --> when ever we go for extracting logistics informatin
LO steps
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
LO Cockpit (Use transaction LBWE)
/people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/21406 [original link is broken] [original link is broken]
/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
To understand LO extraction go through these weblogs by Roberto
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
under cross Applicaion
Generic extraction-->table, view, infoset query, function module
Generic extractors are of 3 types:
1. Based on table/view
2. Based on Infoset Query
3. Based on Function module
GenericSteps
Log on sap R/3.
Step 1. create a table or view for generic extraction in se11.
Step 2. Goto t-code RSO2
Step 3. Here u have to decide whether to extract transaction data or master data attributes or texts.
Step 4. suppose if u have opted for transaction data,then give name in the column ex:ztd_m(data source name)
Step 5. select create button,this will take u to another screen.
Step 6. Here u have to decide from which application component u r extacting data.Ex: SD,MM,..
Step 7. in this screen u have to fill short disciption,medium,long( these r mandatory).
Step 8. then U have to Table name or view name which u have created in se11.
Step 9. I f u want to maintain generic delta then u can select generic delta in top left hand side corner.
Step 10. in next screen u have to give some field which is primary key.
step 11. here u to specify whether time stamp or cal day or numeric pointer depending on u r requirement.
step 12. then u have to specify whether new status for changed records or additive delta.
If u choose additive delta ,then u have to load data to infocube or ods object.
If u choose new status for changed records, then u to load data to ods object only.
Step 13. then save it.
Step 14. then logon to sap bw ,then replicate the data source then as usuall.
COPA
CO-PA--> for financial info
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPA/COPA.pdf
You can browse forum for more detailed info..
Regards,
B

Loadind transaction data from SAP ECC 6.0 system failed

Hi!
I have SAP ECC 6.0 IDES system with the following clients:
100 DEV client
200 BI client of SAP 6.0
Now I would like to load the transaction data from InfoSources 0FI_AR_6 and 0FI_AR_4 from SAP ECC client 100.
The extraction process has been frozen in status "yellow" and after a while changed the status to "red" with the following information
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
The users BWREMOTE and ALEREMOTE seems to be ok and have the suitable authorization.
The tcode SM58 does not show any entries.
The tcode BD87 shows that the IDocs was sent (source system) and has been received on target system.
Question:
How can I solve my problem? Please give me some technical information (tcode, report).
Thank you very much!
regards

Walk through your basis set up and check out
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0751ba5-b7a8-2b10-6d97-e91e85c0fafa
pts appreciated.

Sending IDOC from SAP ECC to SAP MII

Hello,
Issue while configuring.
I have configured the RFC Destination in the Netweaver message listener and when i check the connection in SM59 I got error as timeout during allocate of registered program and I have attached the screenshot of the error page.
I would request a reply asap.
Thanks,
Praveen

Hi Praveen,
First, I would suggest that you identify what version, and SP, of MII and ECC. Also the NW version and SP if applicable.
Second, use this custom Google search and terms MII, IDoc Listener, and perhaps SM59. There are many discussions on IDoc Listeners going back a number of years. Many of the issues with IDoc Listeners have not changed in most of that time, so look at the older ones as well. I presume that you found and are using my How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener (MII 12.1 to ECC 6.0) to set up your Listener? If not, you should review your configuration and setup procedure against it.
I have not looked at MII 14.0 or 15.0, but understand that the configuration of Listeners really has not changed since MII 12.1. So the document is still applicable.
Third, roughly 90% of the problems experienced with IDoc Listeners involve multiple uses of the self registering ProgID. Deleting it in one place, generally does not work. Use it in one place only. Create a new ProgID for each separate Listener (either type) on each separate MII instance for each ECC instance. Save yourself a lot of headaches. Never, ever reuse ProgIDs!!!
Fourth, most of the other issues involve a PI/XI system in the middle. Those are a bit more complicated since they rely on getting the connection configuration set up properly in PI. Since I am not that familiar with PI systems (most times it is not involved with the Listeners), I generally have to get other experts involved. Sometimes a CSS ticket is required.
Regards, Mike
SAP P&I Technology RIG

** Not able to import IDoc from SAP ECC system

Hi Friends,
I am not able to import the IDoc from SAP ECC system in IR. I have checked that, hostname, client, server no. everthing is correct. I checked in SLD also. Host Name is correct.
While import (after giving the user name and password), I am getting the following error.
Problems to reach R3 System
What could be the probelm ?
Kindly help me friends.
Thanking you.
Kind regards,
Jegathees P.

Hi,
Just counter check following step
1. Go to SWCV definition tab select radio button for Import of RFC....
2. In Connection Data for Import from SAP System maintain correct System and correct Client.
3. Make sure you maitain ECC system in Central SLD.
4. In Import Screen check at the top of the screen have SAP System, is that system from where you want to import the IDOC.
With Regards
Sunil

Integrate with a vendor from SAP ECC 6.0 for 'PunchOut' functionality

Hi Friends,
Pardon me if I have made mistakes in using the terminology in my posting. We just use SAP ECC 6.0 and no SRM. We want to integrate with a vendor for so-called Punchout. Our users will click a URL link from our Intranet and it takes them to Vendor's catalog website. They can choose items and create a shopping cart. The website will return us a unique Shopping Cart ID with list of Items in cxml format. We can use that information and create PO. We are not familiar with cxml format and how to process the PO. Is this a standard functionality in SRM ? I don't think we can install SRM since we don't have Business suite license. If any one has experience with above scenario, ie connecting to vendor's cataglog from SAP ECC 6.00 without SRM, can you pl share with us ?
Niranjan

Hi Masa
Thanks for the reply. The vendor supports OCI as well. However, since I was not familiar with it, I was thinking to go with cXML. When I opened the OCI pdf in the URL that you mentioned, it talks about SRM server. Like I had mentioned earlier, we don't use SRM at our company here. Can you let me know in couple of steps how OCI works and how fast we can implement in our ERP ECC 6.0 environment ? I am delighted to note that one of the companies in Japan implemented in 4 hours.
Thanks for your help,
Niranjan

Problem with the SAP menu in CRM 2007

Hello all,
We just had a brand new installation of SAP CRM 2007 in our organization. As soon as I logged in I am puzzled to see that all the menus and menu paths won't show up.
For example:
If I go in to Master data --> Business partner --> There is no menu path for Maintain Business partner etc.
Same is the case with Marketing, Sales and Service. I don't see any of the real menu paths for creating marketing projects, segment builder, sales order creation screen etc. All these components are missing.
I checked on SU01 regarding the roles assigned to me. There were none and the profile assigned to me says "Z_SAP_ALMOST_ALL" or something. I tried finding out the existing roles and am not sure about the options. I added the role for business partner in to my user ID, logged off and logged on and still nothing shows up.
The menu is still the same.

Jack,
I'm going to be very polite here about this, but did you read the CRM master guide before your installation or any of the documentation on CRM 2007?
If you have read this you would have realized that the SAP GUI is no longer supported for most business user tasks in CRM according to OSS note 1118231. In addition a search of this forum would have revealed this same answer. That is why those transactions are removed from your menu.
SAP Easy Access CRM 2007 menu
In future please do a search before asking these types of questions. I'm going to lock this thread as it duplicates a past thread and is a generally known CRM 2007 fact.
Thank you,
Stephen
CRM Forum Moderator

Master data extraction from SAP ECC

Hi All,
I am a newbie here and teaching myself SAP BI. I have looked through the forums regarding master data extraction from SAP ECC in all forums but could not answers for my question. Please help me out.
I want to extract customer attributes from SAP ECC. i have identified the standard data source 0customer_attr and replicated in SAP BI. I have created infopackage for full update. I validated the extractor checker(RSA3) and found 2 records for 0customer_attr.
When I run the info package, the info package remains in yellow state until it times out. Please let me know in case i am missing anything, Please let me know if there is any other process for master data extraction similar to transaction data extraction.

Hi All,
i did the below and afte clicking execute in the Simple job, it takes me back to the Monitor Infopackage screen.
From your info pack monitor --> menu environment-->job overview--> job in the source system--> prompts for source system(ECC) user id and password, enter them, you will get your job at SM37(ECC), select job and click on log details icon. there you can see details about your error. please share that error screen shot.
Please find the screenshots.
I did an Environment -->Check connection and found the below,

Material Replication problem from SAP ECC to CRM 2007

Similar Messages

Maybe you are looking for