Material replication without registering queues in SMQS and SMQR in SRM 7.0

Hi,
Please help me to understand following:
What is the use of transction SMQS and SMQR ?
what is the use of registering inboud and outboud queue in SMQS and SMQR ?
Do material replication will not work if I will not register any queue in the said transaction code ?
If yes, what are the queue I need to register in SRM and ECC respectively ?
Regds,
Jennifer

Hi jenny ,
1. T code SMQS is used to register a destination and prior to this u need to define your destination by using T code SM59.
2.T code SMQR is used to set up the ques.CRM ---> CRM Middleware and Related Components -
>Queue Setup à Register CSA Queues.
3.  to monitor and organise the Inbound and outbound queues.
Sachin s

Similar Messages

  • Material replication done without my material

    Hai Gurus
    I created material  No;21,22,23  in backend system.And carried required procedure for replicating all material.But material replication has done without my materials i.e..,21,22,23 etc
    Could u guys help me on this
    Thanks & Regards
    chandrasekhar

    Hello,
    Please check the config from this blog.
    /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
    New materials created in ECC for a already replicated product category in SRM... transfer happens by BDoc, you can view the queues in SMQ1 & SMQ2.
    Check that there are no filters setup in R3AC1
    In SMW01, you can check the list of BDoc, for material replication BDoc type is PRODUCT_MAT, click on show BDoc message, you will see list of materials replicated via BDoc & errors if any.
    Material Replication R/3 to SRM 3.0 - material not in COMMPR01
    Hope this helps.
    Thanks
    Ashutosh

  • Material replication between SAP and SRM

    Howdy friends.
    Is there any way to stop having to manually activate the material replication queue between SAP and SRM each time please?
    Our admin team go to transaction SMQ2 each day and for 2-3 years have been manually activating each queue manually and doing this several times per queue as the entries do not reach zero. Surely, it is possible to set this up to be automatic as a job?
    Ciao,
    Mike

    Hello,
    I could not find the SDN Weblog but here a link to an article that migh help you....[url]http://searchsap.techtarget.com/tip/0,289483,sid21_gci1245134_mem1,00.html[url]
    That should help you check your settings, et al and resolve your issue.
    Regards, Dean.

  • HT1918 Hi, I have registered at apple site, and i have submitted the credit card information, they deducted some ammount without my permission, why they did that? how can i remove my credit card details from that site or deactivate my account?

    Hi, I have registered at apple site, and i have submitted the credit card information, they deducted some ammount without my permission, why they did that? how can i remove my credit card details from that site or deactivate my account?

    From that HT3702 page :
    If you update your billing information, the iTunes Store or Mac App Store will place an authorization hold on your payment card account, usually in the amount of 1 USD or the local currency equivalent, to verify your account information.
    You might see authorization requests on your online statement. These requests aren't actual charges; they are tests to confirm that your payment card account is active and has available funds to accommodate transactions. Authorization holds are removed by your financial institution shortly after your purchase clears. The time it takes to remove authorization requests varies by financial institution.
    The number of days that it takes to diappear varies by bank, but it's usually a few days - though with the weekend coming up it might take an extra day or two

  • Vendor and Material Replication from ECC6 Ehp7 to SRM7.0

    Hi Experts,
                  I am facing an issue with replicating Material and Vendor Master from ECC to SRM system.
    ECC system - ECC6.0 Ehp 7 &  SRM system - SRM7.0
    Middleware setting is done as per Note 720819 and performed the object like DNL_CUST_BASIS3 , DNL_CUST_PROD0, DNL_CUST_PROD1 and found Sucess in SRM R3AM1.
    Errors :
    1. Material Replication Error in SMW01
    Mat. for Initial Download: Table not supported by function
    Alternative units of measure are inconsistent; correct the values  COM_PRODUCT_UNIT  COMM_PR_UNIT
    Alternative units of measure are inconsistent; correct the values
    Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.
    2. Vendor Replication Error in BBPGETVD
    Backend systems with Release 740 are not supported
    Message no. BBP_BUPA002
    What are all the compatabilty issues will be faced connecting SAP ECC6 Ehp7 with SRM7.0? Can any one list down.
    Please Suggest the valuable comments to resolve the problem as earliest.
    Thanks & Regards,
    Ramprakash N

    Dear Ramprakash,
    Please check below URL for #1.
    Alternative units of measure are inconsistent; correct the values in SMW01
    Please find the following note which might help you for issue #2.
    1313972
    1349825
    1372175
    Thanks
    Shuvrajyoti

  • I just lost my iphone5 in a foreign country. Was not able to register it with icloud and have not installed the findmy iphone app. How can i wipe out my data remotely without these setups? Please help!

    I just lost my iphone5 in a foreign country. Was not able to  previously register it with icloud and have not installed the findmy iphone app. How can i wipe out my data remotely without these setups? Is there any good app i can use to track it? Please help!

    No, nothing you can do to track it if you did not take any measures before the loss.

  • Why do we need to define RFC destination and user for material replication

    Dear Experts,
    why do we need to define RFC destination and user for material replication? Here we use crm middleware only for material replication. Could you please help me to understand it?
    regards,
    Ranjan

    Hello,
    As far as I know, you can use the same RFC destination already available in ECC to SRM to replicate materials.
    You can refer to note 720819.
    Regards,
    Ricardo

  • Material costing without BOM and routing

    I have recd an order on sample basis. I want to cost the materia. I don't have BOM and routing.  I want to cost that material manually.  Is there any provision in SAP to do costing in such type of scenarios.

    Dear BSR,
    I guess you are meaning about cost estimate without quantity structure.
    Check T Code KKPAN.
    Regards
    Mangalraj.S

  • Hi, I installed iOS6 beta without registering it to the developer program. Now on iTunes and on my phone I get the same "We're unable to complete your activation" error. What do I do?

    Hi, I installed iOS6 beta without registering it to the developer program. Now on iTunes and on my phone I get the same "We're unable to complete your activation" error. What do I do?

    You have to restore your phone. To do this turn off your phone and disconnect it from your pc or mac. You then have to plug in the usb part of your sychronize cable into your pc or mac. Open itunes. Now press and hold on the home button on your iphone and plug the cable into it while still holding down the home button. Your iphone will now be in recovery mode and on itunes you will see the option that says restore. Click on that and your phone will be restored to factory settings. If you backed up your itunes all your apps will be downloaded back on to your phone. Including all your contacts and text messages. It took me a couple of tries to restore my phone when this happened so if it doesnt work the first time do it again. Took me two tries. This video will help you out. http://www.youtube.com/watch?v=Jzyy4puapig

  • Im needing a vector Replication of an adobe AI/PS/and or /FL interface to impose on a video. Any direction or tips without having to recreate would be great!

    I'm needing a vector Replication of an adobe AI/PS/and or /FL interface to impose on a video. Any direction or tips without having to recreate would be great!

    You need to draw it.

  • I had a replacement iphone 4 sent from apple through the service plan and now need to change carriers, orange dont now have my imei registered on their database and cant process the unlock can i unlock another way without jailbreak?

    I had a replacement iphone 4 sent from apple through the service plan and now need to change carriers, orange dont now have my imei registered on their database and cant process the unlock can i unlock another way without jailbreak?

    Hi philhardinges,
    You can ask Apple support for the replacement receipt, this receipt would have the old iphone information(including Imei) and the replacement iphone information.
    I had a problem like you and they sent me that information, then with the old imei you can unlock your iphone
    Another way to take the old iphone imei, you can look for the original iphone box, yep, the one i hope you saved carefully somewhere in your house hahaha. The imei is showed on the bottom of the box down-right corner.
    Hope this information can help you.
    Best regards

  • Material replication with LSMW  and R3AC1

    Hi experts.
    I'm using SRM 5.0 trying import the materiais from backend R3.
    I'm doing material replication using LSMW with batch-input of R3AC1, however after I mapping R3AC1 the transaction behaves diference way. Using other screens weren't mapping.
    Anybody Knows how I can change de Batch-input mapping ? Or other way to make this replication?
    Thanks.
    Paulo Afonso Cordeiro.

    any special reason for using LSMW?
    there is readymade CRM middleware available in SRM which acts as interface to get the cust objects(matl grps) & business objects(matl /service masters)
    but you need to make some table settings & site settings for this
    filtering can be done for matl/service in R3AC1
    BR
    Dinesh

  • Material Replication filtering problem

    Dear Experts,
    we are working on SRM 5.0 Server 5.5 and we are facing following problem during material replication and delta download replication. After making all steps related customizing objects alignment between R/3 and SRM, we putted the filter using transaction R3AC1:
    - Table = MARA
    - Field = PSTAT
    - OP = CP
    - Low = E
    - Inclusive indicator
    Then we Synchronized the filter and checked on R/3 table CRMFILTAB: the filter entry was existing even if disappeared after running on SRM MATERIAL Initial Download (strange!)
    Our expectation was to get all materials from back-end having purchasing views and linked to material groups replicated. Unfortunately the number of materials replicated are less !!!!!
    Also we tried to make delta download and the above filter is not taken into consideration during delta download: all products modified on the back-end are replicated, also those materials without purchasing view!!!!!
    What is wrong???? What should we do for making this filter working???
    Thanks
    #Bill J.

    Vangala,
    That's great!!! I tried to implement manually and worked very well,
    Thanks a lot.You got 10 points.
    #Bill J.

  • Problem on Material Replication from R/3 to EBP

    Hi friends,
        I am having a problem on Material replication from R/3 to EBP. I had configured all the required settings in EBP as well as in R/3. Whenever we are starting initial loading R3AS I am getting outbound queues in EBP instead of R/3. I am getting the error like 'The current application triggered a termination'. I could able to replicate Vendor and Locations from R/3 to EBP. If anybody can solve this problem.
    Thanx in advance.
    Raj

    Hi Ahmed,
        Could you please elaborate. I am getting runtime error as 'Message_Type_X' (The current application triggered as termination with a short dump).
    Thanks
    Raj

  • Problem in Material replications

    Hi friends,
    I am having a problem on Material replication from R/3 to EBP. I had configured all the required settings in EBP as well as in R/3. Whenever we are starting initial loading R3AS I am getting outbound queues in EBP instead of R/3. I am getting the error like 'The current application triggered a termination'. I could able to replicate Vendor and Locations from R/3 to EBP. If anybody can solve this problem.
    Thanx in advance.
    SAIRAM.ALLU

    Hi,
    If u define your condition type is manual and if you do any changes in quantity of order in change mode then manual condition will not be determined automatically. Again u have to enter it manually and then save it in change mode itself..
    Regards
    sankar

Maybe you are looking for