Material report showing lead time & min order quantity?
Hi,
Is there a report which I can download which shows by material, the lead time and minimum order quantity?
Thanks
Keeley
We don't have access to any query writing so if it's not possible to get both fields on one table, can I run two reports?
OR...
is it possible to change the ME1M report to display/export horizontally in a table type format rather than wrapped?
Edited by: Keeley B on Sep 23, 2009 7:58 AM
Similar Messages
-
MD04 dates not showing lead time scheduled dates
Hi experts,
In my MD04 screen, dates are not showing lead time scheduled dates (showing only basic dates scheduling) even after MRP run with lead time scheduling.
Please let me know if there is a way that the date column in MD04, shows the finish date from lead time scheduling.
thanks
JayHello
Production dates are not displayed on MD04.
You can include additional fields on MD04 using a BAdI and you can use your own logic to add the production dates.
You will find the relevant BAdI on the following document:
BAdIs for MRP
BR
Caetano -
Re: report for lead time of material
Dear Gurus,
I just want to know is there report to see the lead time of material. Kindly suggest me which is the t-code available
Regards,
RajashekarHi,
You can see the lead time in Report- MCE7 (T Code) for material analysis, here yo will get lead time delivery time of material as per Material group, Vendor,purchase Org. If you want to get material number ,after results displayed choose from menu settings > characteristic display > key & description (or just key) , then
choose from menu settings > column width and extend the length to e.g. 59 (18 material number + space + 40 description)An alternative way is building query taking into consideration Table MARC. Thanking you. -
Report Supplier Lead Time - Days
Hi All,
Can anybody give me the characters, key figures, CKF's, RKF's and other fields that are usually used in Supplier Lead Time - Days Report in general irrespective of the requirement.....come up what ever you remember from your side.
Thanks All,Nevermind
-
hello gurus,
we have a problem here about minimum order quantiy, we have a part where it has to be sold in a minimum order quantity of 10, when i maintain that in material master it applies to every order, problem is when some customers order that item as one of the items in their purchase order they just need 3 or 2 according to their requirements, it is not a good customer service if we say that we sell only in 10 as they dont need them in that quantity. but what we want is if customer orders it as a individual item i mean just that item it must be in minimum order quantity of 10. is there anything in standard system that we can maintain or we need any special settings we need. please suggest me gurus.
Kind regards,
Chakri.Dear Chakri
Two options are there apart from controlling in material master.
- Go to VD51 or VD52, input the customer code and execute. There select the material code for which you want to restrict and maintain "10" against the field "Minimum delivery qty". But this will give only a warning which you can see in "Error log", when you proceed with quantity in excess or less than 10.
- The next option is go to user exit User-Exits in program MV45AFZB - USEREXIT_CHECK_VBAP where you can define your own logic.
thanks
G. Lakshmipathi -
Material Determination at the time of Order Entry
Hi All,
I am a novice to SD Module. I am basically an ABAPER. We have a requirement to restrict certain Materials. My question is as follows :
While in the time of Sales Order Creation if you give the Material Characteristic SAP gets the Material Number for it. Can anyone tell me how do I do the reverse of it? i.e. I have the Material Number and I want to get its characterisitc, for e.g.
I enter "k#/Compound" in the Material Number(VBAP-MATNR) field in VA01 and VA02 and SAP fills in the Material Number. Here "k#/compound" is not the Material Description else we could have easliy got that from table MARC.
I have done some analysis and it shows that SAP gets the Material Number from KONDD(Material Substitution - Data Division) Table based on the Condition Record Number(KNUMH) and Reason for Material(SGURD) Substitution. But I am unable to make out how to get the Condition Record Number(KNUMH) and in which table to look out for the Material text once I get the Condition record number.
Any advice will be very helpful.
Thanks in AdvanceHere are somoe other tables for materials, that may help!...
MAKT Material Descriptions
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
MAST Material to BOM Link
MBEW Material Valuation
MKPF Header- Material Document
MSEG Document Segment- Material
MVER Material Consumption
MVKE Sales Data for materials
RKPF Document Header- Reservation
T023 Mat. groups
T024 Purchasing Groups
T156 Movement Type
T157H Help Texts for Movement Types
This shows the joins...
http://www.erpgenie.com/abap/tables_mm.htm -
Report for PO wise balance order quantity with delivery due date
Dear Sir,
How can we get a Report for all POs ,showing Vendor wise / PO wise / Item wise balance item quantity along with the Delivery Due Date
With Thanks and Regards
B MittalDear Mr Charlie
ME2L with Parameter WE101 and Scope EINT , do not give balance PO item quantity .We look for areport which can give PO wise balance item quantity and delivery schedule date .
Rgds
B Mittal -
FBL3N report showing dump 'Time limit exceeded'
Hi experts,
We are running report FBL3N ( G/L Account Line item display) for all GL accounts for financial Year 2008-2009( Posting date 01.04.2008 to 31.03.2009 ).The report is showing short dump( Time limit is exceeded ). Even for one month, we are getting the same error.
We would like to know the best practice to run the standard reports for longer periods with out getting dump.
Thanks in Advance.
Regards,
Farhanaz.Hi
See Note 1135916 - Line items: Help for analysis for long runtime
I hope this helps you
Regards
Eduardo -
CUIC Reports Show Incorrect Time
We have a single node UCCX 9.0.2 environment that we recently switched over from HRC to CUIC (co-resident) for reporting.
While running some test reports I noticed that the times listed in the reports are off by several hours (see screenshots). I have checked the time zone setting everywhere I can think of, and it's also happening to anyone that runs the report rather than just one person. I have the time zone set to America/Chicago for each user (although I've also tried CST and US/Central). The UCCX server is set to Central Standard Time and it gets it's time from an NTP server. Checking NTP status on the server shows that the server's time is dead on.
I feel like this is the type of thing that an incorrect setting would cause, but I can't think of any other way that this could be set wrong.
I did find a bug (https://tools.cisco.com/bugsearch/bug/CSCur41928) relating to time zone issues that is known to affect our version, but from what I can tell it doesn't apply to us. We're already set to the time zone that the workaround would have us set. I was going to apply the workaround anyway just to see if it made a difference, but I'll have to re-host our license if I do that.Hi,
The user should not have any timezone set. It should be set as blank. Also under the Datasources, check the UCCX Datasource and Edit. Ensure that the timezone is GMT.
Basically CUIC should not have any timezone set. It will pull the information from the CCX timezone which is CST in your case. In the event of any timezone settings on CUIC, you will have issues.
The options are for standalone CUIC so leave it at default.
Regards,
Arundeep -
Report showing the open Purchase orders
Hi Experts,
Is there any standard report to view the open Purchase orders.
Developing a new report is the only solution.
ThanksHi,
You need not create Zreport.
Either you can use ME2N with selection parameter WE101 & Scope of list BEST
or
Go to SE16
Use Table EKPO
Use Filed name ELIKZ
If you give X list of all the delivery completed items.
If you leave blank list of all Open PO items will display.
Reward points if found useful.
Regards,
Vengat -
Reports showing Leading & Non Leading Ledger
Dear All,
Is there any report which shows the differences between Two Ledgers in NEW GL ledger concept.
Requirement is to know the balance and if possible the documents which make up the balance.
regards
PbbHi,
Go to T.CODE S_PL0_86000030 - G/L Account Balances (New)
Thanks ,
RaviTeja -
Hi,
Would like to have a report on Lead time between PO Date & GR date.
Ideally the report should show the PO Number, Date,Material, Mat. Doc Number & GR Date.
Though ME80FN shows by clicking the PO history, But our user would like to have in a single line item.
Is there any other Standard Report to get the above data?
Regards,
VengatHi,
There is a standard report that shows the actual average LT compared to the master data definitions. You can also see the details, and even update master data automatically if you want; WPDTC.
Regards,
Mario -
Min.order Qty from Info record in PR in MRP
Hi,
Is there any setting by which , while running MRP, system will take min.order quantity from info record (instead of material master) ?.
If not , then is there any way to achieve the same?Hi Csaba Szommer
You are right, If you try to convent PR in to PO, and if you have maintained min.order qty in info record, you get message ( error / warning ) as per your message setting.
Your question is also valid that if the same material is being procured by many vendors, and each vendor might have different min. order qty, Hence it has to be picked from info record only.
But I have tried with all the possibilites. While converting PR into PO, based on system message you can correct the Quantity, but if MRP generates PR ,based on the min.order qty in info record, then no need to handle such messages.
You can try also, maintain different min. order qty in Material master and info record, it will always take from Material master and never from info record.
But Logically, it should take from info record.
That is why I wanted to make the system take info record min.order.qty.
So it would solve the problem if you know some setting that takes min.order.qty from info record.
( ref: I am aware of planned del. time , there is one checkbox in plant parametes, if you select that , system will take planned del.time from info record , if you don't, system will take it from material master. So if you know any such setting for min.order.qty, pls let me know. I could not find any such possibilities)
Thanks -
Hi,gurus
I gave minimum order Quantity 5 in Material master(Salesorg1) tab in stipulation.but for that material when i am giving 1 in sales order it is taking smoothly.So is there any more setting to do.
SureshHi Suresh,
You have done the right thing by maintaining Minimum order Qty in Material master in the field - Min.Order qty. By this system will give you a warning if the Qty entered in the sales order is less then the maintained qty.
You can change this warning into Error if you wish so by using the T-code OVAH> Application area V4> Message no = 082. In the same line you have the setting to set this message as Error/Warning.
Hope it works for you.
REWARD if it works for you!!
Regards,
Ajinkya -
Original Planned order quantity
Hi,
I want to capture the planned order quantity. Since planned order quantity is dynamic, I cant able to capture the original planned order quantity.
Eg: After running MRP, system gives a planned order 001 = 10,000 pcs.
When I convert this planned order in to partial order. Partial order quantity = 1000
Now system shows remaining planned order is 9000 pcs.
In which table system will store the original planned order quantity of 10,000 pcs. I tried in planned order table PLAF. The field total planned order quantity (GSMNG) is dynamic. It shows the current planned order quantity only.
Question:
1. Is it possible to find original planned order quantity?
2. If yes, then from which table we can see that.
Regards / USMD05 info cannot be directly read from a table in a meaningful manner unless you have setup the same to be a transparent table. So to read the info you will have to use - BAPI_MATERIAL_MRP_LIST
But I believe a better approach for your need would be to read the planned order & planned qty. from AFPO, add this to the value which you see in PLAF. This would give you the correct picture in your report, as MRP list keeps changing & you will not be able to have a reliable report if its based on MD05 data.
Provide the above spec's to your developer & the report should be easily built.
Maybe you are looking for
-
I have windows XP with 32bit. I have a DVD that I was told was make in MOV. file. I have down loaded and unloaded Quicktime several times and it is always the same. The audio plays fine, but the only video I get is the opening frame of the video and
-
We have finished material down the level semi finished material and we wanted to apply plant overhead only for finished material not for semi finished.Please suggest solution .
-
SQL 2012 failover cluster\mirroring VS AlwaysOn for VDI?
Hi, we have to build high availability SQL 2012 cluster for VDI and we have two options. One option is to build a server cluster with combination of failover and mirroring and other option is to build failover cluster with AlwaysOn. We are not sure w
-
Invoking XSLT from the Command Line with JRE1.4 and JRE1.5
When I invoke XSLT from the Windows Command Line with "java.exe org.apache.xalan.xslt.Process -IN OldFile.xml -XSL StyleSheet.xsl -OUT NewFile.xml" it worked fine with JRE1.4. Then I installed JRE1.5.0_09. The class "org.apache.xalan.xslt.Process" wa
-
Hello everybody. I'm having a strange problem when trying to deploy the examples described in the J2EE-Developers guide (e.g. the Converter example). It requires me to check "Return Client.jar" which I did and I specified the location for the file. T