Material Required

Hi
If you have below mentioned Material
Please forward to my mail id [email protected]
Code-------     Name of the Course
THR 10-----Management / Administration I
THR 12-----Management / Administration II
THR 14-----     Management / Administration III- Case Study
HR 051-----     Human Resources Essential I
HR 052-----     Human Resources Essential II
HR 053------Human Resources Essential III
HR 250-----     Employee Self Service
HR 260-----     Management Self Service
HR 305-----     Configuration of Master data
HR 306-----     Configuration of Time Recording
HR 307-----     Configuration of HR system Controls
HR 325-----     Benefits Administration
HR 350-----     Programming in HR
HR 390------Introduction to Payroll
HR 400-----     Payroll Configurations
HR 490-----     Incentive Wages
CA 500-----     CATS The Cross Application Time Sheet
HR 505-----     Organizational Management
HR 510-----     Personnel Development
HR 515-----     Training And Event Management
HR 520-----     Shift and Workforce Planning
HR 530-----     Technical topics in Human resources
HR 540-----     Compensation Management
HR 580-----     Reporting in Human Resources
HR 310/311----
Time Evaluation
Please Post whatever you have... Thanks in advance.

Hai..
i think these are certification courses. I think u will get all these if u enroll for certification course.

Similar Messages

Creating a planned order with error "Material requires configuration"

Dear All,
I am facing a problem for creation of a planned order with error "Material requires configuration".
To follow the note 180317, I change Account Assignment Category to "U" (Unknown).
However, the system still does display the same error.
Could you please help provide possible solution for this?
Regards,
Phong

See also the following blog post:
Configurable planned order for material variants: Exception "53: No BOM explosion due to missing configuration"
BR
Caetano

Creation Indicator in PR: B Material Requirement planning

Hi All,
I am facing an unusal scenario.
User is claming that PR is getting generated for a material after running the MRP, even there is enough stock.
I checked material & I found that MRP type is ND, there is no entry in the planning file for this material.MRP list & stock requirement list of this material is showing nothing. So there is no way that PR will be created automatically via MRP run for this material.
When I checked one PR for this material, Plant & storage location, creation indicator is showing as B Material Requirement planning.
Could you please help me that why creation indicator is showing as B>
I further checked these PRs are created long back when MRP type was V1. Later they changed it to ND.
How to delete MRP generated PR manually when PO has been created for these PR.
Regards
Shilpi
Edited by: sapmm1234 on Dec 14, 2011 6:10 PM

As you said; the PR was created long ago by MRP, when it was not ND.
If it was already converted into a PO, there's no need to delete it, right? If not, just delete it manually.
In the future, when you change MRP type from a valid type to ND, always remember to do 2 additional things, as the system will not do them automatically:
1- delete the MRP list
2- delete any planning elements if they exist, like planned orders and MRP generated PRs.

Budget is prepared by respective department on basis of material required

Hello All
I had a doubts and need help
If budget is prepared by respective department on basis of material required in the next year. Then how in sap we will able to track in sap.
Budget can be plan on fund center and commitment item, when client make budget on basis of material and services required then how commitments will be created
Thanks in advance
alok

Hi,
FM budget objects are indeed fund centres, funds, commitment items, etc. If your client prepares the budget on different level, it has to be mapped to FM objects either inside SAP (via FMDEIRVE startegy) or outside SAP.
Regards,
Eli

Periodic material requirment in project

Hello Guru's,
I need your help in my project requirment :- We are working for construction project were we have an activity for concrete work.
now total work involved in this activity is 120m3 and the duration is 12 months. So period wise 10m3 work i am going to execute.
To execut this 10m3 of work I need 5kg of cement per month.
So total material required to execute the 120m3 of work in 60kg.
Now my requirment is when I create activity in proj for concrete work, i attach cement as material to this activity and generate the reservation. Against this reservation through MRP material is procured and issused to proj. (this is the process)
While attaching material I need to specify 60kg but system should generate 10kg of reservation every month is this possible???
if so how or suggest me to map this process.
Thanks in advance,
Tushar

Hi,
If I need to cretate periodic requirements for a material which is converted into a PR then do I need to assign the material perio-wise?
what i was thinking if there is any means of triggering a PR for the overall quantity and then splitting the quantity period-wise in the PR.My MM person says no functionality of this kind is available.
Would the best way-out be to create a manual PR and put the periodic requirements line-item wise?
Thanks and Regards

Raw Material Requirement

Guru
My Client Wants material requirement plan for finished product
For Example
One plate of Size 1000 MM X1000 X 500mm in this sheet He wants the three type finished goods of X, Y & Z of different
How to Configure where & is their any cusomation required for this requirement.
pl advise me for this senior
Thanks in Advance
Sudhir

Dear Sudhir,
Generally the sheet metals or raw materials which are to be represented in different sized section using one material code will
be represented as a variable size item R as the itel category while maintaining the BOM for X,Y,Z.
When creating the BOM of X,Y,Z include this sheet metal with item category as R and quantity as 1 ea or 2 ea as required.
For this formula's will be maintained.
Check these links also,
Variable size Item
Regards
Mangalraj.S

What is Material Requirement Planning

what is Material Requirement Planning since i am a beginner in Supply chain management

Material Requiremnts plan and master schedule (MRP) answers two quisitions:
1. How mauch you need to supply (Make/Buy).
2. How much resource Hours needed to produce.
MRP is an unconstrained, and infinite planning engine. this means, if you have a demand (Sales order/Forecast), the planning engine recommend actions to be done based on demand due date only regardless of capacity or material availability, and it gives you exception messages to take action; as a planner; regarding anything that may violate satisfying the demand in that due dates.
Best regards,
Mostafa

Is it possible that we generate material requirement in MRP at company code level?

We want to generate material requirement in MRP at company code level, what is the possibility or any work around.
Thanx in Advance.

Hi Mirza
This is not possible on the standard system. The highest planning level on MRP is the plant.
It has been discussed on the following thread, where BAdI MD_CHANGE_MRP_DATA was proposed as a solution, however, the logic to be implemented on this BAdI is very complex:
MRP Run considering Stocks for Multiple Plants and Requirement maintained for Plant Cluster
If you want to know more about the BAdIs available on MRP check the following document:
BAdIs for MRP
Another alternative is to use flexible planning to plant at company code level, then disaggregate the planning to the plants and transfer the result to demand management and MRP.
See the following thread for details:
Flexible planning | SCN
BR
Caetano

Service Order Material Requirement

Dear SAP consultants
Need to check with you guys on this matter.
I have a service order with list of components. I would like to do an advance shipment and create a quotation from it. Problem is , once the quotation is created the material requirement tab in the service order changes from Immediately to never and the whole line item is greyed out in the service order.
Is there a way, I can create the quotation without transfering the material requirement to the quotation and allow the service order to still be open ? How can I do this with only 1 quotation type .... the others should work as usual ...
Any thoughts or suggestions .. please feel free to let me know ..
Thanks
Moon

Hi Paul,
As you said "
The requirement date is calculated as follows:
1. The start date (earliest scheduled start) of the operation minus
2. The goods receipt processing time of the component and minus or plus
3. The lead time offset for the component in the order
The above values (point 2 and 3) can be adjusted to manipulate the
delivery date."
I have checked for stock & non stock item, but this calculation is not working for work orders. only i can change the date with offset. i checked material master record and change the GR processing time and planned delivery time but its not working. Do you have any idea why its not working?
Thanks.
Shahyan

Datasource 2LIS_03_S194 (Material Requirement Planning)

Hello SDN:
I need to extract data from the datasource 2LIS_03_S194 (Material Requirement Planning) relevant to me. I know this datasource is LIS and to fill it, I need to run a program RMCBMRP2 to fill set up tables, and this doesnot support Delta update.
I have one doubt, that for future MRP data Loads will I have to execute this Program every time and do full loads..? OR can I schedule a job to do.? If so, how to schedule a job.?
Please share your experiences with me.
Thanks in advance,
Regards,
Kalyana Pidugu

Hi Kalyana- I am also using this same datasource and not sure when to run the program RMCBMRP2 in ECC and what parameters (regarding period/dates) to provide in SE38 while running it. If you have found more info on this can you share with me please?
Thanks
Naresh

Material requirment show iddferent quantity than Bill.

Hello ,
I need help on issue, there is one assembly i.e. 4025457 which have child part 4956854. If we look at bill of 4025457 it shows 4956854 need 0.785 LB quantity. But if we generate WIP job for same assembly then in material requirement it showing 0.98125 LB instead of 0.785 LB.
Analysis –
1. No Customization to update it at WIP level.
2. There is no UOM conversion factor.
3. Usage is 1.
Please help!
Mohit

Hello Mohit,
check below reasons :
1. I hope Bill of material for the Item was revised and updated with 0.785 LB but job was created in 10th OCT-2014(earlier) .Are you getting the same issue when your created a new discrete job now ??
2. Please check bill of material setup separately from bill of materials window once not from intended bill of materials window.
3. check what was of the BOM defined for 4076782 (Other component in the bill)
Regards,
Surya.

Preventive Maintenance Plan Material requirement forecast

Is there any way I get to know what whether the materials included in Tasklist of maintenance plan are available or not , Just like forecasting or material requirement planning.
Regards,

I dont think this is possible. You may have to extend the standard simulation program for scheduling to include the Components. You will also have to call the material availability check FM to analyse the demand for the required date.
Even then there is no guarantee for material availability when the Order is actually called.
Regards
Narasimhan

Sum material require by customer

Hi all,
is any way to sum material require by customer in mrp. i want to see the sum quantity by customer in MD04.
THANKS!
JAMES

Hello James,
Your post is not a SAP GUI issue, therefore, you will not get a useful reply.
Before posting, read the 'Scope of the SAP GUI Forum' post and see if there is an entry for PP-MRP-BD

BI7.0 certification material required

Hi All,
Could any one please provide me BI7.0 Dataware housing and Reporting material required for Certification exam.
It would be really helpful if they are of MCQ type.
Thanks in advance.
Rahul

Hi
Check out the following links for BW 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
What's new in SAP NetWeaver 7.0(2004s)? - An introduction to the functionality deltas and major changes
http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
Almost All BI 7.0 Books and Material.
This link is very useful
bw 7.0
http://it.toolbox.com/blogs/sap-bw/sample-certification-questions-3479
Hope it helps
Regards
gaurav
Edited by: Gaurav Paul on Sep 29, 2008 11:01 AM

Disable Delete icon in Material Requirements from

hi
can anyone tell me how to disable the "Delete" icon and the "Delete option" in the "Edit menu" in the Material requirements form in WIP.
is it possible through form personalization??
is yes, please tell me the method...
reply
thanks
anandc

Hi,
check the program name for the transaction and create a screen exit for the same.
Also u can go for copying the code in customer namespace and then add ur own functionality to dactivate or remove the delete function.
Pls reward points for the answer.
Regards,
Ameet

Material requirment from Projects

Hi,
I have one scenario where the material requirments will come from projects as materials (BOM) are assigned to project builder. After MRP run if there is material components available in free stock, it is n't getting adjusted against material requirments, rather creating new PR for the items. Request you to suggest on this.
Thanks & Regards,
Ranjan

Dear Biplap,
Any material required for a project and is assigned to a project is generally a special stock, "Q' type. Basically SAP handles material required for project seperately, Sale order separtely, consignment seperately, vendor seperatly etc.
So when u run MRP for the first time related to that project, generally no material will be avl <b>under that project segment</b> and create Planned order / PR as the case may be eventhough there is unrestricted normal stock for that material. SAP MRP will only consider the materials or docs for netting only if it is related to that particular project/sale order.
If you want to consider the unrestricted stock also then possibly u will have to write a Z program which will convert the normal unrestricted stock into project stock and again rerun MRP on that material to cancell the requirement generated thro the initial MRP run.
reg
Kiki
Award points if this helps

Material Required

Similar Messages

Maybe you are looking for