Material reservation at Planning

Hi All,
My scenario is I have 4 production floors, and each floor having one production storage area from where materials will be issued to process orders. A central store will be supplying the materils to all four floors.I am running MRP floor wise, MRP running will be at different times. When I run MRP at first floor system check the material availability at Production floor and Central store, and system will not block the material at central store for eg I need a material 'x' 100 no's which is available at central store. so system will not propose any requision. When i Run MRP at second floor, I need a material 'x' 100 no's  for this also system will check at central store and it will not generate requirements as 100 no's available at central store. Actually i need 200 nos to meet my requirement.
Is there any way to solve my problem
PR

Hi,
I do not know your exact situation, but maybe you should consider to use WM if you want to finetune your material staging process - as I understood your problem is much closer to material staging than MRP are concept.
Regards,
Csaba

Similar Messages

  • Where we enter raw material reservation qnty for planned order in monthwise

    sir,
    as per client requirement in every month raw material reservation quantity fixed for planned order in monthwise.
    in sap Where we entere raw material reservation   for planned order in month wise nov, dec, jan and whre its show.
    is it possible after mrp run.can we check that raw material reserve stock in mmbe for planned order.
    pl guide me step by step

    Dear Prakash,
    1) in MMBE, you cannot see Reserved qty against plan order ( it is not a confirmed receipt )
    2) the reserved qty which is shown in MMBE is against production order
    3) only after converting plan order to production order ( Header material )
    4) dependent requirements will convert into reservations
    Regards
    kumar

  • Convert planned orders into material reservation

    Hi All,
    Can anyone tell me if it is possible to convert through a standard SAP Program, planned orders (MRP) into a material reservation? Like MD15 converts into Purchase requisitions!
    Thanks in advance,
    MG

    Hi,
    I don't think.
    - Planned order is procurement proposal. It increases available quatity - you can check it in MD04.
    - Reservation is a requirement that reduces your stock (available quantity) - check it in MD04.
    E.g.
    header material: materialA
    children part: materialB
    If you have PrdOrd for materialA, at the same time you have a(n order) reservation for materialB. PrdOrd of materialA means that your stock increases (you produce materialA), whilst (order) resrvation of materialB means its stock will decrease because you consume it for PrdOrd.
    So, you can see that the nature of PldOrd & reservation is totally different - that's why I think there's no point in speaking about of conversion of a PldOrd into reservation.
    Regards,
    Csaba

  • Material Reservations and PO

    Hello,
    my question is at which stage of the network the material (components) reservations or Purchase orders, automatically trigger.
    when the project (with networks and materials) is created or released.
    because I have issue like the project is in TECO and for some reason we are planning to undo the TECO. if I undo the status, will it again creates the PO or reservation.
    Is there any document, which explains in detail about the configuration of PS -MM integration.
    Is there any concept like labor reservation just like material reservation. I am not sure is question itself true or not.
    Thank You

    Hi Gokul,
    My answer is correct considering the following in my perception and not in SAP functionality view.
    <<<<
    At what status of the WBS / network will this Material reservations or PO's get triggered. Is it at Created or Released.
    >>>>
    When WBS elements are in created status means project has not yet received the approval to go ahead from the project controller or whoever may be in the business.
    If some reasons, Management cancel the project or Customer cancel the project and its very easy to set the DLFL flag on project. But what will happen to the committed costs. Do the Management ready to take up unwanted burden and raise unwanted inventories in warehouse. Risk Mitigation is an alternate option but try to avoid inviting the risks which will save time and money.
    There are so many things to consider just not going by the SAP functionality. This is what I feel and you may not accept my statement but at the same time I respect your views and ideas.
    Regards,
    PSR
    Edited by: PSR on Nov 4, 2011 2:04 PM

  • Reservation against planned order

    Hi...
    I have one issue with reservation against planned order.
    We have REM & after MRP run generates planned order with order type PE.When i check planned order in table PLAF.
    I found reservation no. & same has been passed to RESB , I got the reservation details but it is not allowed for goods movement XWAOK field in RESB. So no question of goods movement through MB1B with movement type 311.
    My question is that is there any customization related to above scenario so that reservation is allowed for goods movement?
    Regards
    Tushar

    Dear ,
    In REM , you will recieve reservation against planned order .But GI always happens during GR or after GR along with back flashing .I do not think so you can issue material against reservation as like normal PP Order reseravation  in the production order .
    1.Goto -SPRO->production-> Rep Manufacturing->Define Rem MAnufaturing profile(OSP2) --->Control data, in the Control data 1 tab select the "GI back flush at GR posting".
    2.Check in  the REM profile assigned in MRP view of material Master (MM03)
    Based on this above set up , you can make Goods Issue for Planned order in REM .If you deselect that option execute material staging transaction code is MF60 and then go for REM backflush. In materil staging the components issue is carried out for the planned order.After that you can execute the REM backflush in MFBF
    In rem scenarion components placed on the production lines anonomously (without ref to planned order)...you cannot issue materials like in production orders scenario. if you want to have track on the good issues before the GR then use the pull list concept...there will be no movement type but you will have track on quantities issued to header parts/production lines not to planned orders.
    Hope this clarifies your doubt .
    Regards
    JH

  • Material Reservation Create Upon Saving Work Order

    Dear Experts,
    We have a requirement that material reservation needs to be created upon release of the PM order. However in SAP standard it is created upon saving the PM order.
    Do you know the way how to change it that reservation will be created upon release of the PM order? Is there any OSS note etc. I had a search on service place in SAP but couldnt find something relevant sofar.
    Any help, idea will be highly appreaciated.
    thanks in advance,
    Mehmet

    Hi
    Yes you can configure the system using standard setting where the reservation will be gerated after order release.
    Please follow the following path.
    1. SPRO> SAP Standard IMG setting> Plant Maintenance & Customer service-->Maintenance & service Processing > Maintenance and Service Orders>Functions and Settings for Order Types-->Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval
    In this step, you can define:
    Whether reservations or purchase requisitions relevant to materials planning should be generated when an order is created or only when the order is released. You do not select the field reservation/purchase requisition. The result is that purchase requisitions are only generated when the order is released, and reservations only become relevant to materials planning once the order has been released.
    I think this will resolve your query if not let me know.
    Regards
    Makarand Gurjar

  • MTO material - Combine three planned orders into one process order

    Hi Gurus,
    Does anyone know if and how I can convert three planned orders of the same material into one process order?
    So:
    1.
    Sales order 1 (material X) --> generates Planned order 1
    Sales order 2 (material X) --> generates Planned order 2
    Sales order 3 (material X) --> generates Planned order 3
    2.
    Process orders 1,2,3 (material X) --> Process order 1
    3.
    Process order 1 --> reserved sales order stock for sales orders 1,2 and 3

    M,
    One process order cannot create Sales Order Stock for three different sales order items.  A single process order can produce Sales order stock for AT MOST 1 sales order/item.
    This scenario can be achieved under a Make to Stock environment, where the production order creates 'generic' stock (not sales order specific).
    Best Regards,
    DB49

  • PO from Material Reservation

    Dear Guru's,
    I have maintained reorder level at storage location level and when stocks falls below this reorder level and i am running MRP system is creating Material Reservation from that storage location.I need to create PO fro that quantity.How do i get that.Kindly help.
    With Regards.

    Hi,
    setup your data for reorder point planning. check this saphelp link.
    [http://help.sap.com/saphelp_470/helpdata/en/f4/7d257044af11d182b40000e829fbfe/frameset.htm]
    search in forum you will find many rlevant threads which talks on how to set up reorder point planning.
    below is content from one of the thread.
    Find bleow the set up following set up for automatic re-order point planning :
    1.Material Master Set up : Maintain all the relevent parameters from MRP1 to MRP4 view , Forecasting View
    1.MRP Type -VM , Lot Size -EX
    2.Procurement Type -E for FG and F for ROH
    3.Planning Startegy -10 or 40 in FG/SFG and 20 for componenet
    4.Planned Delivery Time in MRP2 VIEW
    5.Indiviaul/Collective Indicator - 1/2 based on your requirement in MRP4 View
    6.BOM Explosion -Keep it blank
    7.Service level percentage -MRP2 view
    8.Maintain Forecastin view data like model selection , Histry period , period indicator , Forecast control pramaters ,
    10.Make sure that you have min 12-8 monhts total consumption update in Forecasting view .
    Configuration : InSPRO -MRP -Check MRP Type -VM-check the details like Re-Orde point .Safety Stock both the automatic calcvualtion box are marked .
    Finally as a sample test , select any material -mm02-execute forecast in mm02-forecasting view -exectute forecast -then save .Run MRP in MD03-1,1,3,3,1.NETCH indicator and check the result in MD04
    Hope it will help you to proceed further
    Thanks
    Ritesh

  • Material reservation and unrestricted Available qty report

    Hi
    SAP Buddies
    Please can anyone tell me how to get the lCollective list of Material Reservation with Available unrestricted stock??
    i.e.
    MAterial No.         Reserve Qty         Unrestricted Available Qty  
    These three parameters are must ?
    Thanks  in Advanve
    BV

    Hi,
    Please try MB25 MB25 or MF65.
    Regards,
    Mohd Ali.

  • Creation of Reservation for planned order

    Hi Team,
    Is it possible to create reservation for planned orders after MRP run?
    My opinion was the reservation can only be created with reference to production order after MRP. The reservation can not be created with reference to planne dorders after MRP run because planned orders are intermident document which will not exist in the system always. The planned order details will not be available in the system once it get converted into production order.
    How the reservation will be processed which was created with reference to planned order after converting the planned order to production order?
    Kindly need ur guidance.
    Thanks
    psk

    Dear PSK,
    In a typical discrete manufacturing setup production orders are the promised receipt for which reservations gets generated as
    soon a production order is created.But only if the order is released goods movements can be posted against the reservation
    details through MIGO/MB1A for 261 movement.
    It's not required to create any reservation at the planned order level or which may not help you in any means to your business.
    But however in a REM scenario MF60 is used to create stock transfer reservations for 311 movement where planned orders
    are used for production backflush.To explain in detail even without any planned orders you can do a stock transfer reservation
    for a production quantity.
    Check and revert back.
    Regards
    Mangalraj.S

  • How to generate Outbound idoc for Material Reservation

    Hi Experts,
    I want to send outbound IDoc when a material reservation is created with tcode MB21.
    I have been working on this issue and finding the solution in SCN for a week...
    I found some messages similar to this but I could not find out the correct way how to do that.
    At this moment, I configured BD64/WE20 referring the following topic which seems to be feasible solution but could not find any outbound IDocs created, unfortunately.
    Implement ALE_RESERVATION_CREATE
    I appreciate if someone can help me how to create outbound IDoc with MB21 or advice some possibility of missing configuration or steps.
    Best Regards,
    Kenji

    Hi;
    Have been able to find the solution to create the IDoc MRESCR after entering a reservation? 
    I am in the same situation and I do not see the IDoc output in the BD87. 
    It would be nice if you share the solution.
    Thanks in advance

  • Datasource for material reservation data from SAP R/3 (RESB & RKPF table)

    Hi,
    How can i take material reservation data stored in SAP R/3 RESB and RKPF table. I can create generic data source and full upload of data is possible but how to manage daily delta. None of these table having change date to extract daily changed record to BI. Please suggest.
    Please inform if any business content data source available for Reservation data?
    Regards,
    Manish

    Hi,
    Many times we face such situation, that we need to create a generic data source and there is no field to define delta.
    In such situations you can go for psuedo delta.
    Ask the client that at any point of time till which date will the data be changed.
    Eg. the client may say that at max we will change last three months data.
    In that case everytime you can do a full update and load only data of last three months.
    Instead of date you can consider any field as per your requirement.
    Regards,
    Mansi

  • Purchase/Material Reservation do we have standard in ESS and MSS.

    Purchase/Material Reservation do we have standard in ESS and MSS. IF we have tell me the version of ESS/MSS .

    Hello
    Please tell me exactly what you want ?
    Regards
    M B Raju

  • Cant see Object Services Toolbox in MB23 Material Reservation transaction

    Hi all,
    The Generic Object Services Toolbox is not available in SAP MM transaction MB23 used for accessing Material Reservations. SAP version is 4.7/620.
    As its a standard SAP transaction referring to standard business object type BUS2093, so I was expecting that the Object Services will be enabled for this.
    Kindly help as to how I can configure the display of Object Services toolbox in this transaction to link attachments. (If its regarding changing some code like including cl_gos_manager or SWU_OBJECT_PUBLISH, then kindly explain in detail.
    With Regards
    Neha

    Also it is against the SDN Forum Rules of Engagement to cross post questions.  I can see from your posting history you have sent this same question to many different forums (several of which make no sense at all).  Please avoid this action in the future or risk having your forum posting privledges suspended.

  • Report with material number and planned delivery time

    Is there any standard report with material number and planned delivery time ?

    Hi,
    I do not know any standard report. Please try SE16 + MARC...
    BR
    Csaba

Maybe you are looking for