Material Reservation using MB21

Dear Expert,
When i try to do the material reservation using MB21 i get the message as stock does not exists. But when i see the stock either using MB52 or MMBE i get to see the stock under Un-Restricted Block.
Can anyone help me to sort the issue.
Regards.

Govinder,
Also check whether there are other open reservations exists for the material/plant/storage location combination, may already the stock which is existing is reserved you can check in MMBE itself under reservation column.
Regards,
Prasobh

Similar Messages

  • Implement workflow process for material reservation using tcode IW32

    Hi
    How can I implement workflow process for material reservation using tcode IW32
    - PM order.
    Thanks,
    Amos

    Hi;
    Have been able to find the solution to create the IDoc MRESCR after entering a reservation? 
    I am in the same situation and I do not see the IDoc output in the BD87. 
    It would be nice if you share the solution.
    Thanks in advance

  • Material Reservation Workflow(MB21)

    Hi all,
       Have anybody has implemented a workflow for Material Reservation(MB21).
    I have a problem in that.I want to know how to develop a item wise approval process for this.
    The scenario is whenever a reservation is created the goods movement shld be blocked and should be sent for approval.The approver on executing the workitem will be taken to MB22 transaction where he have to select the items for which goods movement is allowed(enable a check box) which means those items are approved.
    The problem is say if there are 5 line items in the reservation and if the approver approves only 3 then he can approve the remaining after two days or one week or he will approve only 3 items remaining he is not interested in approving .
    How to control this in workflow how come we can know that the approver is interested in only 2 times and remaning is rejected or the approver will approve the items later..
    Any idea Please let me know..
    Regards,
    sapient

    Here you go:
    MB21 ==>
    1. Create a subtype of BUS2093. (Through SWO1 T.code)
    2. Create an event "Created".   (Through SWU_EWCD T.code)
    QA32 is a report for Inspection Lot. Hence I infer you probably want creation event for a inspection lot.
    QA01 ==> Inspection lot
    BUS2045    --> Inspection lot
    Follow same steps of 1 & 2 above for the "Created" Event

  • Error during material reservation in MB21

    Dear all
    During material reservation getting below error
    Date   1831 cannot be converted (please correct) Message no. AG011
    Regards
    Arun

    Dear Arun,
    Please let me know the process by which you have resolved the issue, since i am also getting same kind of error in production server.
    Regards,
    Piyush

  • Trigger workflow for material reservation via IW32 (PM order)

    Hi,
    How can I implement workflow process for material reservation using tcode IW32
    - PM order.
        Thanks,
                      Amos

    Hello,
    when there is no material in the store if the order is showing the availablity,then check the Availability Check for Material, PRTs, and Capacities node in IMG.
    In order there are two material availability check,one is over all material availability check,which will shows shortage only before release or during release once the order is relased it always shows that the material is available.
    other material availability  check is individual line item check,when you check with this it will take to the ATP quantities of the material where it will shows the availability same as the MMBE,including the Reservation,PR & PO quantity.
    So better check this.
    Regards,
    Raj.

  • Authorization control on material reservation creation and change (MB21 & M

    Hi Friends
    Please help me to find a solution on Authorization control on material reservation creation and change (MB21 & MB23).
    Client looking for a control over end user on those T.Code s but not at T.Code level;
    Client looking for control either based on "Storage location" and/or u201CProduct hierarchyu201D.
    More specifically, user A and B both can Create/Change MR but user A only can do it for the MR which related to storage location say YY while B authorized for storage location ZZ
    Thanks in advance.

    Hello Partha,
    Only available Standard SAP Authorization Objects, related to Reservations, are M_MRES_BWA (Reservations: Movement Type) & M_MRES_WWA (Reservations: Plant) where you can maintain authorizations based on Movement Type & Plant respectively and hence seggested enhancement.
    You can use Tcode-SUIM to search for Basis authorization details i.e. Roles defined for specific transaction/authorization object / profiles.
    Revert if any further info required.
    Regards,
    Anup

  • Workflow event for  material reservation(mb21),QA02 transaction

    Hi,
      I created material reservation(mb21), but no event was triggered for the transaction.
      I checked for event in swel.(event trace is on).
      please let me know how to handle this.
      please also let me know the event of qa32.

    Here you go:
    MB21 ==>
    1. Create a subtype of BUS2093. (Through SWO1 T.code)
    2. Create an event "Created".   (Through SWU_EWCD T.code)
    QA32 is a report for Inspection Lot. Hence I infer you probably want creation event for a inspection lot.
    QA01 ==> Inspection lot
    BUS2045    --> Inspection lot
    Follow same steps of 1 & 2 above for the "Created" Event

  • Movement type for GI of material reserved from Network not allowed

    Hi Experts,
    Hope all are doing well.
    I am facing a problem in PS, I have the following scenario.
    I have some material in a storage location say 1010 - project storage location.
    I want to use that material for some project. I have created a reservation from the Network for an activity 0010 with Procurement indicator - Reservation Plan Stock and Item category L.
    After this saved the network, system generated reservation number.
    I want to issue the material against this reservation from the Project Storage Location. (its not marked as Project Stock)
    When I am trying from MIGO system says the material is not maintained for Q i.e., Project Stock.
    I checked the movement type it is 281 Q, GI Network from Project, where as I want the Movement type 221 GI for Project from own.
    The Movement type field in the Where tab of MIGO screen is in grat mode. So I cannot change that field.
    Please tell me how can I issue the material from a storage location to the project for the reservation created from the network.
    I am able to issue the material in case I am creating a manual reservation through MB21 with movement type 221.
    Please guide me on this.
    Thanks and Regards

    First yu will have to bring that much qty to project stock for that WBS element by MVT type 415 vide transfer posting. Then you can issue that qty. against the desired reservation.
    I hope this solved your problem
    Regards.
    Sanjay Bapat

  • IDoc for Material Reservations

    Hi all,
    I need to send out an IDoc (outbound) when a new material reservation is created using tcode MB21.
    -> Which IDoc message type can I use for this scenario?
    -> Does it also work in combination with an ALE distribution model?
    Does anybody have any tips? Thanks in advance for your replies!
    Regards,
    Kenny

    Hi,
    Thanks for your reply. Can you explain how to setup the ALE distribution model for this message type?
    I have included the BAPI MaterialReservation.CreateFromData in the model. However, when I post a material reservation with transaction MB21 no outbound Idoc is generated?
    Please advice.
    Regards,
    Kenny

  • Edit or delete  material reservation

    Dear All,
    regarding material reservation created using MB21 TCode.   some examples in which system creates reservation without date (for some items, not all items) When i am  try to edit or delete such reservations system gives us an error   "Posting date is initial" and does not allow us to edit or delete such reservations.
    1.  Why system creates material reservation without date and how to prevent it?
    2. How to delete such reservations?
    sunil

    Hi,
    Regarding this issue, the reason why you got F5669 when accessing
    reservation in MB22 is that the requirement date RESB-BDTER should be blank.
    I don't know why the requirment date of the reservation became blank
    in your system..
    Unfortunately, there is no standard report available to update the old
    reservations with requirement date. This problem can be solved by updating the value via SE16 in deabugging mode
    1. run SE16, input the table name RESB and press ENTER
    2. input the reservation number and press Run button.
    3. In transaction code bar, input the '/h' and press ENTER to activate the debugging mode, then double click the item line.
    4. in debugging mode Select 'Switch to Classic Debugger'
    5. then press F7 and Double click code, then its value was shown below.
    Currently the value is SHOW, please change it to EDIT, then click the Pencil button.
    After clicking Pencil button, press F8.
    Now you can see the field is editable. You can now change the required field's value and click the SAVE button
    ***CAUTION****
    Please be careful and not wrongly input or typing value in other fields!
    After you exit SE16, the edit mode is closed and return to normal display mode
    I hope this can be of help
    BR
    Nadia Orlandi

  • How to generate Outbound idoc for Material Reservation

    Hi Experts,
    I want to send outbound IDoc when a material reservation is created with tcode MB21.
    I have been working on this issue and finding the solution in SCN for a week...
    I found some messages similar to this but I could not find out the correct way how to do that.
    At this moment, I configured BD64/WE20 referring the following topic which seems to be feasible solution but could not find any outbound IDocs created, unfortunately.
    Implement ALE_RESERVATION_CREATE
    I appreciate if someone can help me how to create outbound IDoc with MB21 or advice some possibility of missing configuration or steps.
    Best Regards,
    Kenji

    Hi;
    Have been able to find the solution to create the IDoc MRESCR after entering a reservation? 
    I am in the same situation and I do not see the IDoc output in the BD87. 
    It would be nice if you share the solution.
    Thanks in advance

  • Cant see Object Services Toolbox in MB23 Material Reservation transaction

    Hi all,
    The Generic Object Services Toolbox is not available in SAP MM transaction MB23 used for accessing Material Reservations. SAP version is 4.7/620.
    As its a standard SAP transaction referring to standard business object type BUS2093, so I was expecting that the Object Services will be enabled for this.
    Kindly help as to how I can configure the display of Object Services toolbox in this transaction to link attachments. (If its regarding changing some code like including cl_gos_manager or SWU_OBJECT_PUBLISH, then kindly explain in detail.
    With Regards
    Neha

    Also it is against the SDN Forum Rules of Engagement to cross post questions.  I can see from your posting history you have sent this same question to many different forums (several of which make no sense at all).  Please avoid this action in the future or risk having your forum posting privledges suspended.

  • Generic Object Services not enabled in MB23 Material Reservation

    Hi all,
    The Generic Object Services Toolbox is not available in SAP MM transaction MB23 used for accessing Material Reservations. SAP version is 4.7/620.
    As its a standard SAP transaction referring to standard business object type BUS2093, so I was expecting that the Object Services will be enabled for this.
    Kindly help as to how I can configure the display of Object Services toolbox in this transaction to link attachments. (If its regarding changing some code like including cl_gos_manager or SWU_OBJECT_PUBLISH, then kindly explain in detail.
    With Regards
    Neha

    Thanks Deepak,
    But I thought the described methdology in the PDF pointed by the URL is for how to do it for any custom business object type, will it be useful for the SAP standard business object as well like BUS2093. When I try to edit an already created SAP object, it starts asking for an access key.
    With Regards
    Neha

  • Generic Object Services Toolbox in MB23(Material Reservation) unavailable

    Hi all,
    The Generic Object Services Toolbox is not available in SAP MM transaction MB23 used for accessing Material Reservations. SAP version is 4.7/620.
    As its a standard SAP transaction referring to standard business object type BUS2093, so I was expecting that the Object Services will be enabled for this.
    Kindly help as to how I can configure the display of Object Services toolbox in this transaction to link attachments. (If its regarding changing some code like including cl_gos_manager or SWU_OBJECT_PUBLISH, then kindly explain in detail.
    With Regards
    Neha

    Thanks Deepak,
    But I thought the described methdology in the PDF pointed by the URL is for how to do it for any custom business object type, will it be useful for the SAP standard business object as well like BUS2093. When I try to edit an already created SAP object, it starts asking for an access key.
    With Regards
    Neha

  • Movement Types for Material Reservations

    Dear All
    I have defined New package for defining new movements types for material reservation in PM order. this activity is carried out at following path.
    SPRO> Plant Maintenance and Customer Service>Maintenance and Service Processing--> Maintenance and Service Orders >General Data>Define Movement Types for Material Reservations.
    This has been carried out as i want to take the material in using 904 movement as reversal of 261.
    Can any body tell me where can I assign tghis package to Order/order types?
    Regards

    hi
    In the standard system, movement types are preset which you must not change.
    For the components, Plant Maintenance and Customer Service, the entry with the key 'IWO1' is relevant. In addition, you only need the two entries for the goods issue (GI) of materials for maintenance orders and the accompanying reverse operation (GI cancellation).
    as of my knowledge we don't have the option to go with ordertype wise settings
    -AShok
    Edited by: Ashok Keerthipati on Nov 19, 2008 5:57 PM

Maybe you are looking for