Material select views ( costing ) maintenance

Hİ all,
I want to create automatically costing 1 and costing 2 views for all of the materials. How can I do this?
thank you and best regards,
hilal

Hi,
I think , I didn't exlplain it very well.When I created the materials , the materials had'nt got the costing1 and costing 2 views. But now we will start to use product costing , so I must create costing views for all the materials. I customized views in material types. but I don't want to create manually thsese views. Because there are lots of materials for this situtation. How can I create automatically?

Similar Messages

Material select views in lsmw??

Hi Guru:
I am encountering a strange question that I selected some tab when creating material in mm01and I ticked create views selected check box,but when I am going to lsmw and trying to record transaction,the system asked me to select tab views again although I had set it in mm01,so it will be causing the issue when I am do recording transaction in lsmw,help!!!!

hii
This LSMW shows how to mass load material master characteristics. The LSMW used is exactly the same as what was used to load release procedure values. Input file is obviously different.
Material Master classification can be used to store additional information against a material master. Example: if it is finished products you may want to store: brand, pack, etc. If it is maintenance materials, you may want to store: size of item, grouping, etc.
Before loading the values (per material), you first need to create the fields (characteristics) and group them together in a class. This is done with following transaction codes:
u2022     Create class u2013 transaction CL02
u2022     Create characteristic(s)s u2013 transaction CT04
u2022     Assign characteristic(s) to class - transaction CL02
No screen shots about CL02 and CT04 u2013 you should be be able to get that right.
Material characteristic values can be viewed from a few places:
u2022     MM03 Display material and select characteristic view
u2022     CL20N Specify class type 001 and material master number
u2022     CL24N Specify class name and class type (001 in this case)

How to Upload different Material with Different Selection View

Hello Experts!
Iu2019m new in ABAP and trying to understand methods of LSMW. Now I get a question for you guys. Let say I need to upload 10 different materials. Now for instance.
1st material has Basic data 1 and Basic data 2.
2nd material has Basic data 1, Purchasing and Purchase Order text
3rd material has Basic data 1, Classification, Purchasing, MRP 1, MRP 2 & MRP 3.
4th material has Basic data 1 & Basic data 2.
5th material has Basic data 1, Classification, Purchasing, MRP 1, MRP 2 & MRP 3.
And so on. Now here Iu2019ve notice that every material has different INDUSTRY SECTOR, MATERIAL TYPE AND SELECTION VIEWS. I understand that Industry Sector, Material Type and other data I can specify in my file but how I can control SELECTION VIEWS for different materials. Because for different Selection view coming screens will become different accordingly.
So can somebody can please tell me how I can control different select views for different material and upload it in SAP.
Thanks.

Hi
I understand that you are performing LSMW on MM01 transaction code..and are uploading through batch input in LSMW.
Actually, for a tcode like MM01 I dont think you should use LSMW, instead you can go with the BAPI: BAPI_MATERIAL_SAVEDATA.
The views is a serious problem with MM01 when performing using batch input..
So, go through the documentation in SE37 tcode for the BAPI...
The information you get there will help you on how to proceed.
Regards,
Vishwa.

Can I write a SELECT query on maintenance view?

Hi,
Can we write a select query on maint. view? If not what are the views on which we can write the select queries?

hi,
you can write select query for maintenance view, database view and projection view but not helpview as it is only intended for f4 help.
reward if helpful
prasanth

Reg. price maintenance in material master and Costing

Dear Experts
I have maintained price for material in material master and costing,but when I create PO price didn't come from anywhere. Pls help me.
Thanks
Rajakumar.k

Dear Rajakumar,
The values that are maintained in the material master in costing view is considered only for costing
purpose.
Say while doing the cost estimate for a material using CK40N,a costing variant will be used and say For
Eg,PPC1,for this a valuation variant will be linked ,as per this valuation variant for costing purpose the
first priority would have been given to the planned price in the material master in costing 2 view.
So this value will be considered only for costing purpose.
For procurement related things you have to maintain a purchase info record for a material + vendor
combination in ME11 and a source list in ME01.
In the purchase info record you can maintain a price for buying the material from that vendor.
I hope this will clear your doubts.
Check and revert back.
Regards
Mangalraj.S

Fields in material master views related to costing

Hi All Gurus,
In Material Master Views
Can you suggest the fields or indicators according to MM point of view,
which should be given or indicator to setting on.
Rgds
Ana.

Hi,
For accounting view.
If material is FERT or HALB: -
Enter valuation class,
Price control as "S"
Standard price(If you have run costing for FERT & HALB then not enter standard price because at the time of costing run system calculate standard price of product).
For ROH, VERP, ERSA etc...
Enter valuation class,
Enter price control as "V",
Enter moving average price.
Regards,
Mahesh Wagh

T- code for viewing cost of raw material

Hi Experts,
There are so many elements in arriving at cost of raw material such as moisture loss, transit loss, handling loss etc. Is there any report in SAP which shows all these elements, if yes, what is the T- code? Please advise.

Hi,
Please check the table MBEW for the material for its cost normally or the MM03 .However at the stage of raw material the transit loss etc? Normally if any operation is done over the material then losses like this will come .
Normally once the PP things like Routings etc are done and then for the finished material which contains this raw material will have costing run to have the final cost at CK11N .
If not the above answer suffie you please elobare your requirement .
Regards,

Std report to view planned price1, planned price date1 in view costing 2

Hello Guru
Is it possible to view planned price1, planned price date1 in view costing 2 in material master using standard SAP report when I select specific material and plant in selection screen ?
I really want standard SAP report but don't want to create my own query specific for this case
Any reply would be appreciated
Thanks

HI,
In Table SE16N - MBEW you can get the planned price data.
Regards,
BK

Material Master views for every material type

HI Expertis,
I am facing to the big problem. My requirement is to identify the Material Master Views relevent to the each and every Material Type.
As an example, for the material type "FGTR" what should be the required views to create material master?
From the MM01 Txn i found 36 Material types. Also found the standard views in "OMS2" Txn. But in OMS2 txn it gives me almost all the views in material master.
Atlease i hope to categorize the material types which are going to use same material views. So i can ask abaper to develop it.
these are the required Material types : MODE, FGTR, WETT, KMAT, LEER, LGUT, FERT, FOOD, INTR, CONT, IBAU, HERS, NLAG, NOF1, UNBW, HIBE, VERP, FRIP, PIPE, FHMI, ROH, LEIH, HALB, DIEN, ERSA, HAWA
I would be gratefully thank u, if u can guided me on this matter.
Thanx & Regards,
Rashika.

Hi,
You can ask your abaper to write a small program by using table t134(T134-PSTAT) and T132T .From this tables ,for each material type, you get all views.
User department Maintenance status
Work scheduling A
Accounting B
Classification C
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z
hopw this will help you.
With Regards,
Jaheer

Creating a Selection View : HR ABAP

Hi All,
How to create a selection view in HR Abap.
I found some information related to it.
Call the Object Navigator, (SE80), and from the Workbench menu, select
Edit object. Under More.., click Selection view and choose Create.
I tried it but unfortunately i got stuck.
Can anyone navigate me how can i create a selection view.
Thanks
A

I got it sorted now, what you need to do is type /nse80 and before you enter the into the actual program for editing you will see workbench on the top left then the rest of the path is available, as described in the reading material!
Enjoy
Regards
Tatenda

Create Material Master Views in mass-change

Dear All,
We have to add a additional view to the material master of some products.
Is this possible to do as a mass change (ex. MM17) or have we to do it with transaction SCAT/ MASS?
Do you know an other solution?
Thank you.
Best regards,
Thomas

Hi,
Use
LSMW using standard SAP provided RMDATIND program- check with ABAPer - You can extend all views or you can pick and choose selected views.
or
BDC scripts - If u have only 1/2 views extended use this.
Mass change doesn't help.
Hope this helps

Is there any list / report to see the material posted to COST Center

Hi ...
I have created a Purchase Order for raw material with Account category "K" cost center and prepared a goods receipts for that.
As I was expecting this GR doesn't increase the stock of Plant mentioned in Purchase Order
But I was expecting that there will be two enteries in MATERIAL MOVEMENT with + and - qty. But there is only one entry with + qty.Can anyone explain the reason for that.
Also pls help to search a report where i can see Stock which have been consumed by a COST Center.
REGARDS
SANDEEP

Hi Sandeep,
When you Receipt the material for Consumption (Cost center ), There two entries are posted with PO amount .
i.e
Debited to G/L account assigned to Material valuation class with Transaction GBB-VBR.This G/L account was used as a Cost elements for Cost center.
Creadited to GR/IR Account.
Reports:-
Go for transaction code MB51
select Materia , Plant,...
Select Movement type -201
Execute report.
Go for Current display varient and select cost center as aPosition/line 1and continue.
You will get report by cost center.
Rewards if helpful..
Regards
sanjayL

Display MM03 screen with out selecting views using interactive list.

Hi Experts,
I have one query, I am displaying material data in a list. when i click on material number in the list it should show material data i.e should call MM03 with all the view data .
When i am using call transaction 'MM03' skip first screen. I am able to call MM03 screen but unable to skip the View Pop up screen it should be selected default and the veiw data should be displayed.
Ex: when i am clicking on materil number from the list it will directly take to the Basic data1 screen with out the pop up screen for selecting views.
hope this is clear...
Thanks
Sunil kairam.

Hi Dzed Maroz ,
Thanks for the quick reply... its works.. !
Can you please tell me the methodology behind SET PARAMETER ID 'MXX' FIELD 'K'.
I was trying using below code earlier was showing the pop up screen.
SET PARAMETER ID 'MAT' FIELD P_MATNR. "
CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
but now it works... thanks..
kindly explain SET PARAMETER ID 'MXX' FIELD 'K'. hw it works... which filed parmeter id is MXX and y we have choosen 'K' ??
Thanks & Regards
Sunil kairam

Display process order material wise planned cost

Hi
When I display process order CO03 and select variant Cost Trend for cost analysis. System show total figure of raw material.
My requirement is to check material number wise pland qty and value for a process order. Planned Activity Qty and Actual Qty with value
thanks

Thanks for reply
Here is a ABAP report requirment on following format please help me.
Product :: Description :: Raw mat :: Planned Mat Qty :: Act Qty :: Planned Mat Cost :: Act Mat cost
9000 :: Milk :: 100000 :: 2000Kg :: 1900 :: 50000 :: 60,000
thanks

Selection view in MM02 BDC program

Hi Experts,
I am doing BDC Session method for Tcode MM02.There i am getting selection View screen for different material.But if i select a material in Sales view i need to select Sales :Sales org dAta.
It's coming third position.
But for some material it's coming fourth view.
If i record bdc in third position it'll take third view some other. how i can select the view in selection view.
Please,Anybody knows give me the suggestion.
Thanks & Regards,
Nandha

Hi,
use this Function module <b>SELECTION_VIEWS_FIND</b> to find the view position.
This One of functional modules for those who still has to use BDC for Material Master transactions (MM01 and MM02). Allows to determine line number for desired view in the "Select View(s)" window, to prepare BDC for the view access
Find the positon of the View based on this function module and write the code to select that perticular view.
Hope this solves your problem
Thanks
Sudheer

Material select views ( costing ) maintenance

Similar Messages

Maybe you are looking for