Material; Serial Number profile check

Dear All.
We've recently upgraded from ECC 5.0 to ECC 6.0.
In 5.0 we used to receive a warning message if someone tried to create a serial number for a material which did have a serial number profile.  The message was "Material not allocated a Serial Number Profile".
It was only a warning message, but was still helpful.
Now in 6.0 we're not getting that message.  SAP is letting us create the serial number even though no profile has been assigned in the material master.
Does anyone know if there's been a change made between 5.0 and 6.0?
If this is configurable?
Other tips?
Many thanks!

Hi,
Ecc 6.0 also if you are not assign serial number profile it will give warning message.
below the message number will display as warning.
Material not allocated a serial number profile
Message no. IS160
Please check with ABAPer.
SAM

Similar Messages

  • Sales Order Incompletion log - Serial Number profile is missing for materia

    The sales order is incomplete with missing data = No. serial numbers
    System gives an information saying "Serial number profile is missing for material".
    Message no. V1192
    I maintained a serial no. profile for the material in "Work scheduling" view.  But still the document is incomplete.
    Please let me know how to make this document complete.
    Thanks,
    Shankar

    Hi,
    Goto the Sales document in VA02  ->Edit-> incompletion log.
    It will show the data which should be filled, select that and click on the COMPLETE DATA tab and it will lead to the field in which the data should be entered.
    Please do like that and save it
    then once again check the EIT-->INCOMPLETION LOG
    if the document is complete save it
    rgards,
    santosh

  • Maintenance of serial number profile for a material

    Hi,
    We need to maintain serial number profile for a material. Presently there exists stock for this material.
    Could you please let us know the prerequisites for maintaining the serial number profile for a material where stock exists.
    System should not allow to update the material with serial number profile if stock exists, since for the existing stock serial numbers are not available. But in our case, system is allowing to update the profile for the material where stock exists. Could you suggest if any setting/config is missing to throw an error.
    Regards,
    Srinivas

    I have the solution below.
    - Don't change Serial no. profile
    - Goods issue all stock with mvt 201 or 261 into temporary cost object and note your text.
    - Change Serial no. profile in material master
    - Goods receipt all stock (You may ref. material doc.) and you need to input serial number for all materials.
    Hope this solution can help you.
    Edited by: Saiyaman on Dec 9, 2009 5:33 PM

  • Remove serial number profile

    I would like to remove a serial number profile in the material master for a material that does is no longer handled as serialized.
    During trying to remove the serial number profile in the respecitve material a system-error message occurs telling "Serial numbers already assigned to this material" and it refers to report RISERNR9.
    Could you please tell me the required steps (e.g. remove stock? / change each serial number status?) that are required to realize this? Is there a OSS note available that descripes the approach?
    Thank you in advance!

    Hi,
    Please execute the serial number profile removal process and see.  Material serial number removal procedure as follows.
    Using T-Code MM02-change material code to the respective plant(6000),storage location,sales org and then give input data to the material view screen basic data1, basic data2...... In the view Plant data / Stor.2 input screen General plant parameters options Serial no.profile - '0001', SerLevel - '1' data to be removed during change/edit of the material. After that doing MIGO for the material serial number should not asked and also not displayed.  set the deletion flag in IQ02,  archive the serial number history using archiving object PM_OBJLIST,  archive the serial number using archiving object PM_EQUI. Please execute these steps and check. Hope it works. Thanking you.

  • Serial number authorization check

    Hello!
    I want to create an authorization check for serial number creation tcode IQ01.
    So when a user selects a material that he is not authorized to, he will  not be able to enter into the screen of sn creation.
    Can i customize iq01 in order it to open automatically the general tab of equipment view???
    Thank you

    You have to configure the serial number profile & assign it to Material master. In the configuration profile of serial number, you have to check the check box for serial number required for processing & set the Goods movement transaction where you want to automatically create the serial number or create the serial number for the material using Tcode IQ01.
    During Serial Number profile in Serializing Procedure you have to maintained the following settings:
    MMSL - Maintain goods receipt and issue doc. 03 02
    SDLS - Maintain delivery 03 02
    SDRE - Maintain returns delivery 03 02
    In Serialization profile, there is an checkbox for (Existing required) uncheck that check box & then test your transaction. You will get an button "Create new in serial number" in selection screen during goods receipts...Create new serial number for material there & then make goods receipt.

  • Serial Number Profile in repetetive manufacturing :-

    Hi all ,
    I have a issue related to use serial number profile in repetetive manufacturing industry.
    In my client scenario there is  one finished good product which is produced internally inside the plant where repetetive manufacturing scenario is using by using 'mfbf' or 'mf42n' transaction.In this both we are doing GR & GI posting together in one shot.
    Here one more scenario is that, one semifinished good is also consuming while manufacturing the finished good(repetetive) & the same semifinished good is produced in different plant by descrete manufacturing & consumed in this plant where repetetive is going on inside the finished good.
    In both the cases they want to use serial no.
    1. For semifinished good which is a finished good for a plant & then transfered or sell to different plant .
    2. For finished good manufactured by repetetive method.
    Here the problem is after getting the stock of semifinished good i have got the serial no. & then transfered the same serial no. to the new plant . at the time of manufactre finished good system is asking serial no. for finished good & consuming the semifinished good but here i also want to consume or capture serial no. of semifinished good.
    How to consume this serial no. of semifinished good , means pop up should come for both the material finished good & semifinished good.
    I am using two different serial no. profile for both the product with stock check indicator as 2.
    Serializing procedure for semifinished good :- MMSL  03 01 & PPSF  03 01
    Serializing procedure for finished good        :- PPSF  03 01
    I would be highly thankfull to you if you provide the best solution .
    Regards
    Piyush Sharma

    please check here (may be it will help a bit):
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/f8c814b3f911d1896e0000e8284931/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/8a/a5aa004adc11d189740000e8322d00/frameset.htm

  • Serial Number Stock Check at the time of Delivery

    Experts,
    Process:
    Sales Order PR(Purchase Order) GR( New Serial Numbers are created automatically or manually keyed in)
    Once the Goods Receipt is received, we do the (SO) DELIVERYu2014SERIAL NUMBER ASSIGNMENT Post Goods Issue
    Issue:
    Current Serial Number Profile Management does not do a valid serial number check during DELIVERY CREATION where we do a SERIAL NUMBER ASSIGNMENT.
    Only during POST GOODS ISSUE, the check happens for valid serial numbers; this is too late in the game for business as there is a time lag of 3 days from the DELIVERY CREATION and PGI.
    Reason being--- We donu2019t check the following u201C Existing Stock Checku201D( which does a serial number validation during delivery creation as well)
    SPRO>Plant Maintenance and Customer Service>Master Data in Plant Maintenance and Customer Service>Technical Objects>Serial Number Management>Define Serial Number Profiles
    If we check this option, the business requirement to do a valid serial number check does happen during delivery creation, however we cannot create new serial numbers during Purchase Order- GOODS RECEIPT.
    QUESTION:
    Can we have the system check the valid serial numbers from stock during delivery creation and serial number assignment.
    And Also create new serial numbers during Purchase Order- Goods Receipt.

    Hi,
    Thanks for the reply.  This field is having the value the count of serial numbers entered irrespective of the valid serial numbers entered.  I created two delivery document, one with serial number which was not there in the stock and the other with a valid serial number.  For both the delivery document LIPS-ANZSN gives the count of serial number which I have entered.
    Please let me know how can I move further.
    Rgds,
    Gopali

  • User-Exit for Serial Number Profile / Equipment creation

    Hi ,
    In the Material Master Data , we have a serial number profile and at the time of
    Post Good Issue , the system do generate an equipment record in the Service Module .
    That is standard SAP and working very well .
    For some customers (Inter-Company) customers we do not want any Equipment record in the Service Module to be created .
    What standard SAP functionality or user-exit can we use in order to not create the Equipment record in the Service Module ?
    Regard's

    Transaction SPRO
    Plant Maintenance and Customer Service --> Master Data in Plant Maintenance and Customer Service --> Technical Objects --> Serial Number Management --> Define Serial Number profile
    In the Serial number profile, go to Serializing procedures. The EqReq field determines whether an equipment is to be created or not. For e.g. 01 in MMSL implies that equipment will not be created during GR,
    Not sure whether this will satisfy your requirement. Will need more information for that...
    Hope this helps,
    Lakshman

  • Serial number profiles differ

    Hello experts,
    I have one material with serail no profile & other is without serial number profile.
    we are required to do 309 movement from serialised material to non-serialised material.
    System is reflecting error as mentioned below.
    "You want to carry out a transfer posting for materials with serial number management. However, the serial number profiles of the receiving and issuing points are not identical."
    Is there any way that we can do conversion of material from Serialized to non-Serialized.
    Thanks.
    AbhiD

    Dear Abhijeet,
    Thanks for response.
    In OIS2 we are using procd MMSL Maintain goods receipt and issue doc. with Serial Number Usage as "OPTIONAL" for the profile required in material master.
    I require MB1B - Transfer posting (mv type 309 material to material xfr). What needs to be done for this so that it should not dipaly error of serial profile mismatch.
    Thanks.
    Regards, AbhiD

  • Number Ranges for the Serial Number Profiles

    Hi All,
    We wanted to trace the Goods movement based on the serial numbers. we could make this possible by attaching the serial number profile with relevant procedure (Stock Chk) to the Material.
    Now the issue left out is of Number range and the pop-up for the existing serial numbers for the material. Is it possible to define Number Ranges (Ext. / Int) to the Serial Number profile ? Also, to get a pop-up for the serail numbers of material currently in Stock, which can be issued. Currently, I have to get the detail of sr. No. thru' IQ09 / IQ03.
    Pls advise.
    Shekhar.

    Hi,
    Yes. In IMG under Plant maintenance -- > Technical objects -->Serial No profile.
    Here you can create diff profile with difff procedures.
    And mention the properties of each.
    There is a material master record for each type in the system. For control purposes, the company wants to know which customer received which collector type, and which serial number(s) of the collector type were supplied to the customer, when the individual solar collectors were delivered.
    It is therefore necessary to assign a serial number to the customer delivery in addition to the material number.
    A serial number master record is created with the assignment of the serial number. You can maintain data fields specific to the serial number in the master record.
    At a later date, it may be necessary to enter equipment master records for materials that have already been serialized and delivered to customers, for example, if the producer of the solar collectors also has to perform maintenance activities for the customers and therefore wants to use all the functions available in the equipment master record for a serialized material.
    In order to keep this option open at any time, you must define a number range for serial numbers. The numbers assigned from this number range are not the serial numbers but reserved keys that stand for the combination of material number and serial number and the equipment number that may possibly be assigned.
    You can also define one or more serial number profiles.
    The serial number profile defines how and under which conditions a serial number is assigned for a material.
    Note
    A material can only be assigned serial numbers after the required serial number profile has been entered in the material master for a specific plant.

  • Regarding the material serial number

    Hi Experts,
    How can i get the material serial number?
    Rgds,
    Sruthi.

    Hi Shruthi,
    _Analysis_ :
    A Sale Order (EBELN) can have one or more Materials (MATNR) in its line items (POSNR).
    Each of these Materials will be used in one or more Equipments (EQUNR). The  combination would be unique and this unique combination generates a unique Serial No.
    For each Material in a Sales Order, we need to attach a u201CSerial No. Profileu201D. (These Serial No. Profiles are defined in SPRO settings).
    In a Sale Order, we can see the Serial No. for a particular Material, only if the Serial No. Profile is defined/attached.
    _To verify:_
    Goto Tcode VA03. Enter the Order no.
    In the Menu bar, go to u2013 Extras à Technical Objects : To find Sale Order No., Material, Equipment No, Serial No.
    Logic to fetch Serial No. :
    1.       Enter the Sales Order No. (VBELN) in table VBAP.
    Determine:
    ·         Materials (VBAP-MATNR) for this VBELN
    ·         Position No.( VBAP-POSNR)
    ·         Serial No. Profile (VBAP-SERAIL).
    2.       Enter the Sales Document No. (VBELN) into table SER02.
    Determine:
    ·         Object No. (OBKNR) for each Position (POSNR) of the Sale Document.
    3.    From steps 1 & 2 :
          Enter this Object No. (SER02-OBKNR) and Material (VBAP-MATNR) into table QBJK.
          Fetch the following fields:
    ·         Equipment No. (EQUNR)
    ·         Serial No. (SERNR)
    This logic actually works. I have implemented it jst a month ago.
    Hope this solves your problem.
    Rgds,
    Lakshmi

  • Serial Number Profiles based on sales order movement types.

    Hi,
    I am trying to config. serial number profiles based on specific movement types in sales order.
    So as usual,i have created Serial number profile with Serial Procedures including MMSL.
    I have assigned this procedure MMSL to Movement type group created by me.
    And similarly i have also assgined this movementype group to specific movement type which i need to use.
    But the system asks serial number for all movement types inspite of me speciifying specific movement types to be triggered.
    Have anyone faced this situation. Could you pls help me?

    Hello Diwakar,
    Thanks for ur suggestion.But,i found it is possible in the following thread
    Serial Number Profile and assigning to movement types
    And moreover we have an option to define serialization atttributes for movement types in plant maintenanace.
    i followed the similar step,but it was'nt working.
    Could you please chk it and let me know your suggestions

  • Hi I have adobe CC for teams, a team member is having problems opening indesign we are being asked for a serial number, ive checked on our admin account and he is one our our registered 'members'. I wasnt the person who set this up originally so I'm a bit

    Hi I have adobe CC for teams, a team member is having problems opening indesign we are being asked for a serial number, ive checked on our admin account and he is one our our registered 'members'. I wasn't the person who set this up originally so I'm a bit lost, i cant seem to find any serial numbers on the my account section and it seems we have no registered products? can you help?

    Hi There,
    We have checked the details of your team, all seat are assigned properly.
    Now there are few details that we would need in a Private Message so that I can assist you appropriately.
    Name of the user:
    Email of the user:
    Meanwhile, try the below mentioned links.
    Creative Cloud applications ask for serial number
    Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
    [Note: Details that we need is critical, make sure you send them in via Private Message only.]
    Thanks,
    Atul Saini

  • Function module to get material serial number status

    Hi Gurus,
    How to get get material serial number status? Is there any function module?
    TCode IQ03 to display the serial number staus, but where i can find the status (AVLB / ESTO / ECUS) of these serial number ?
    Pls help.
    Regards,
    Sankaran

    hi,
    SELECT SINGLE  equnr objnr FROM
                               equi INTO (equnr1 , objnr1)
                               WHERE sernr = wa_final-sernr
                                 AND matnr = wa_final-matnr.
        CALL FUNCTION 'STATUS_TEXT_EDIT'
          EXPORTING
            client           = sy-mandt
            flg_user_stat    = 'X'
            objnr            = objnr1
            spras            = sy-langu
            bypass_buffer    = 'X'
          IMPORTING
            line             = sttxt
          EXCEPTIONS
            object_not_found = 1
            OTHERS           = 2.
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    Regards
    siva

  • Get inbound delivery number by using material serial number

    is anyfuction module to get inbound delivery number by using material serial number?
    input---material serial number.
    output--inbound delivery number.

    Hi,
    BAPI_OUTB_DELIVERY_CHANGE
    BAPI_GOODSMVT_CREATE
    it's ok with the Function module
    CALL FUNCTION 'WS_DELIVERY_UPDATE_2'
    EXPORTING
    VBKOK_WA = LWA_VBKOK
    SYNCHRON = ' '
    NO_MESSAGES_UPDATE = ' '
    COMMIT = 'X'
    DELIVERY = P_ITEM-VBELN
    IT_SERNR_UPDATE = LT_SERIALS
    IMPORTING
    EF_ERROR_SERNR_UPDATE = L_SERNR_UPDATE
    <b>Reward points</b>
    Regards

Maybe you are looking for