Material/service master catalog upload (ECC-CCM)

SRM have 2 possible scenarios to upload the material master data to CCM:
1- Upload material master data from ECC to SRM and, after, from SRM to CCM.
2- Upload material master data directly from ECC to SRM.
Does anybody know the name of the transaction or report in ECC to upload the material/service master catalog directly to CCM?
Best regards,
Cristiano Soares

Hi All-
I have about 3 tricky questions concerning CCM-ECC Integration
1.) Does anybody have any idea on how to upload Material and Service master from ECC 6.0 directly into the CCM 2.0 system. Is there any standard program like we have in SRM called as BBP_CCM_TRANSFER_CATALOG. I
2.) Also are there any complications or is it possble to integrate CCM 2.0 directly from ME51n? I am aware that PM and PS out-of-the-box can be directly integrated to CCM. Is there a similar way to achieve this functionality. If yes can anybody give me some pointers on this.
3.) Are there any complications involved with uploading service masters and interfacing CCM to EBP or ECC and directly using the service master from CCM to create a Shopping cart (CCM-EBP) or  a purchase requisition (CCM-ECC).
I hope some one can throw some light on these questions.
Suitable points will be rewarded for helpfull answers !!
Thanks,
Sundeep

Similar Messages

  • Master Catalog Items in CCM ?   (without XI)

    HI everyone,
    I need to load my master catalog items into CCM 1.0, I'll use CSV because I'll not have XI for a few months.
    For some reason, when I add to my shopping cart any item comming from my CCM 1.0, the "Order as Direct Material" button dissapear.   It is managed like the "described" items (when the user types everything).
    Im not sure if I need to map some fields in CCM in order to make a link with my Master Material CAtalog (R3).
    Any idea ?
    Regards,
    Diego

    Bonjour amis  =)
    1. Vadim, I followed your instructions and now is working fine (Direct Order Material button is there)
    2. Christophe, Im not sure if your propossal works.. because I think I have all that requirements and the button wasn't there:
       - you have a product ID:YES
       - the catalog ID is customized to no product check:YES
       - the product source logical system does not equel EBP logical system (i.e. it is not a standalone scenario). Normaly it should be the backend where the product really exists: YES, in my case I put R3DCLNT120 (R3 client 120)
    But the buton wasn't there.. =(      Anyway, If I need for some reason those items in my R3 (because inventory), this scenario would not work for me.  Am I right ?  
    Thanks for your help guys,
    Regards from Mexico,
    Diego

  • Sample CSV file for Master Schema Upload in CCM

    Hi All,
    Can some please send me a sample CSV file for Master Schema Upload in CCM to my ID <i>[email protected]</i>. Points will be awarded for the same
    Regards
    Hari

    Hi
    Sent the same to your email id. )
    Regards
    - Atul

  • Service Master Catalog in SRM

    Hi All,
    My environment is SRM 4.0 Extended Classic.
    Can the Service Master Catalog in R/3 be used (transfers/replicated) in SRM 4.0? If so, what is the step by step process?
    Also, can there be replication from SRM to backend, and from backend to SRM to keep the  catalogs in sync?
    We are just trying to get the full functionality out of our services procurement. If any one has ideas and would like to share, please feel free.
    Thanks

    Hi ,
    We are having similar requirement with SRM5.0 system .The service master with service breakdown  level
    has to be updated in SRM.
    Can anybody share the infornation.
    Regards,
    Avinash

  • Service Master Integration from ECC

    Hi,
    We are on Extended Classic Scenario and we are wondering if we are able to use the Service Master which is replicated from the ECC and use it when creating a Service Type Shopping Cart?
    We managed to get the Service Master into SRM and visible in COMMPR01 however when we raised a Service Type SC, we are unable to select the Service although the search help for the Service ID managed to return the result and once click OK, the Service ID is not in the SC. Error message "Product &1 does not exist; check your entries" /SAPSRM/PDO_SC 012.
    Anyone knows if the above are possible and if yes, are there any pre-req for this to happen?

    Hi Elham,
    Thanks for the reply as we have already managed to resolve the issue. The issue is due to some of the enhancement which we have done previously on the material which has caused the service master not being able to be selected into the SC. We have identified it and fix it.
    Regards,
    Tiang.

  • Regarding material & service master

    Hi,
    This is emmanuel SAP SD CONSULTANT, CAN WE CREATE SERVICE MASTER INSTOOD OF MATERIALS MASTER.  BECAUSE MY CLIENT IS SERVICE ORIENTAED NOT MANUFACTUING. INSTOOD OF MATERIALS MASTER, CAN WE CREATE SERVICE MASTER. SO HELP ME IF ANY BODY

    Hi,
    In our project also we are using service material only.
    Here we are creating the material by using "MM01" T.Code.
    We have to select the material type as "DIEN(service material)".
    And proceed further in creating the order.
    Select the required layouts.
    Coming to Item category,goto VOV7 T.Code.
    Seelct your Item category.Details.
    Don't tick the check box "Item Rel. for Delivery".
    Save.
    Donot maintain any entry in VTLA T.Code.
    In VOV8 T.Code for your sales document type maintain value for order rel. bill type.
    As it is service material,it is not relevant for delivery.
    Regards,
    Krishna.

  • Difference between service material & service master

    What is the difference between creating service material using DIEN & service master.What is the business requirement of these two service types?

    check the below Link
    Re: DIEN vs. service master record

  • Uploading of catalog never end (CCM)

    Dear All,
    Yesterday there was an update to our master catalog schema so I used upload. However, it is still showing in process status until now. I checked table /CCM/D_UPD_STATE and can see this catalog has two entries, one was for yesterday's upload, with status 03 (still running), and I don't think I'm able to upload the schema again.
    Can someone help me with below questions?
    1. How can I change this 'still running' status, and which status should I change it to?
    2. After the status in this table is changed, will it be fine for me to upload the schema again?
    3. Besides status in this table, is there anywhere else I need to check/change, and how?
    Many thanks for your help in advance.
    Elly

    Hi Jason,
    Thanks for your reply.
    I have already canceled the mapping jobs with SM37 so no any new mapping jobs now.
    However, the master catalog is still in 'locked' status. When I highlight it and click 'edit', it always tell me it's 'is locked because it is currently being updated'. I wonder whether it's because I just used program /CCM/CLEANUP_UPDATE_STATUS to clear the 03 status update record...
    So what I further checked is:
    > In table /CCM/D_CTLG_REQ, I can see two entries/versions for this master catalog, both versions has 'FILE UPLOAD' in the 'Sender' field, both has same 'Changed on' time. Does that mean actually the schema upload is still running somewhere?
    > In table /CCM/D_CTLG, I also can see two entries/versions for this master catalog, the old version was valid from the time when I updated schema last time, and the new version shows to be valid from the time when I tried to upload new schema last week.
    > I don't know what I can do now. I wondered whether I should delete the new version of the master catalog by program /CCM/CLEANUP_CATALOG, but I really dare to do anything now.
    Would you please advise what else I should do to release my master catalog so that I can upload the new schema again?
    Many thanks!
    Elly

  • (CCM2) Error when edit Master Catalog

    Hi,,
    I have one problem
    Hi,,
    I have two problems with the catalog
    1.- After I uploaded some content in a supplier catalog, I was not able to do any mapping. I think the problem is in the master catalog. Now suddenly I can't edit it. A error message is displayed. I saw the dump in the system but I don't see any SAP note related.
    the message say
    "RAISE_EXCEPTION" C                                                     
    "SAPLSYGU" or "LSYGUU03"                                                
    "GUID_CONVERT"                                                          
    or                                                        "SAPLSYGU" "PARAMETERS_ERROR"                             or                                                        "SAPMHTTP " "PARAMETERS_ERROR"                           
    Our level of patch is
    SAP_ABA     640     0015     SAPKA64015
    SAP_BASIS     640     0015     SAPKB64015
    PI_BASIS     2005_1_640     0005     SAPKIPYJ65
    ST-PI     2005_1_640     0003     SAPKITLQH3
    CCM     200_640     0002     SAPK-26402INCCM
    SRM_SERVER     500     0008     SAPKIBKS08
    Thanks

    You should check if you have two different master catalogs in your CCM system itself, not only in your web frontend (e.g. Internet Explorer). One master is probably active and one master is set to inactive. Delete the inactive master and you are able again to do the mapping between supplier catalog and master catalog and to edit the master.
    @ R.Janke: Independent of the problem in this thread. Is it really necessary to publish the master schema only? In case you want to work with purchasing catalogs you wouldn´t publish your master catalog at all. Is your proposal related to any SP or is it already solved with a new SP?
    Regards,
    Bodo

  • Initial down load of service master

    hi,
    my issue is related to service master tranfer from ECC to EBP.
    i have done all load objects for service(Basis3,PROD0,PROD1,SRVMAS,SERVICE MASTER)
    Internal number(numeric) is not tranfering but external number
    (alpha numeric) is tranffering.
    when i am downloading service master(having internal no range
    in ECC (numarical) even though Bdoc status and queue is successful
    service master is not replicated. and also i am not gertting any error in
    SMW01 or SLG1 or R3AM1.But if service master is external (having alpha-numarical)
    service master is replicating and there is no issue.
    is any body face this issue?
    regds
    Rami.

    Check the tx R3AC1 >> Filter settings of SERVICE_MASTER and take a look if you range is avaleable in the Object filter settings.
    Rgs,
    Pedro

  • How to upload Master Catalog Schema in Catalog Content Management SRM

    Hi All,
    Please provide the solution as we are in real trouble.
    We have to delete master catalog and upload it again. Deletion is done because the mapping and all are being corrupted. SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog.
    Can all of you guide us what to do:
    1. How to delete a existing Master catalog (can de-publish will do it?)?
    2. We have the master catalog schema with us. Please tell how to upload this schema. Which link we have to follow?
    3. After uploading the master schema how we can check that master catalog is working fine.
    The answers will be rewarded with valuable points
    Regards
    Praveen K Ghosh

    Sridhar,
    I am contacting you regarding the same problem with the CCM MASTER CATALOG, as Praveen said, SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog.
    I have read the documents that you refer to at http://help.sap.com/saphelp_srm50/helpdata/en/7f/9b62405c910272e10000000a155106/frameset.htm.
    In this link I found information really useful, however according to the document the CCM MASTER CATALOG should be created automatically by the SAP Catalog Authoring Tool, this happends the first time that you are using the system.
    Catalog Creation
    You use this function to create catalogs in SAP Catalog Authoring Tool.
    You can create the following types of catalogs:
    Supplier catalogs
    Procurement catalogs
    Model service catalogs
    Note
    SAP Catalog Authoring Tool creates the master catalog, the SRM product catalog, SRM contract catalogs, and the contract catalog for service specifications automatically.
    When SAP Catalog Authoring Tool is used for the first time, you must open the Edit Catalogs application once, before you create any catalogs. Choosing Edit Catalogs triggers the creation of the master catalog. If you do not do this, SAP Catalog Authoring Tool outputs an error message when you try to create a catalog.
    We have already the Master Schema and we know how to map the CCM MASTER CATALOG to the supplier and procurement catalogs. The main problem is that we need to delete the CCM/MASTERCATALOG and created again.
    1. How delete the CCM/MASTERCATALOG?
    In a Test enviroment I have delete the CCM/MASTERCATALOG using the "Edit Catalogs" mode then choosing the catalog and confirm the deletion.
    Once this has been done, all the catalogs has been erased including the CCM/MASTERCATALOG, so now we have the system in blank. I am not sure if this is the correct way to delete the catalog or there is an easiest way where the Procurement and supplier catalogs dont dissapear once the CCM/MASTERCATALOG is deleted.
    2. Once the CCM/MASTERCATAOG is deleted how to created again?
    According to the instructions the SAP Catalog Authoring Tool should created this automatically when is used for the first time, however how we can created the CCM/MASTERCATALOG again if the SAP Catalog Authoring Tool is not used for the fist time.
    Is there a way where the system can create the CCM/MASTERCATALOG for a second time?
    I follow the steps to create the CCM/MASTERCATALOG for the first time however i didnt get a positive result.
    Any help provided will be really appreciated.
    Thanks in advance
    Carlos

  • How to delete and create the CCM MASTER CATALOG in Catalog Content?

    Hi All,
    Please provide the solution as we are in real trouble.
    We have to delete master catalog and upload it again. Deletion is done because the mapping and all are being corrupted. SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog
    http://help.sap.com/saphelp_srm50/helpdata/en/7f/9b62405c910272e10000000a155106/frameset.htm.
    In the link above I found information really useful, however according to the document the CCM MASTER CATALOG should be created automatically by the SAP Catalog Authoring Tool, this happens the first time that you are using the system.
    Catalog Creation
    You use this function to create catalogs in SAP Catalog Authoring Tool.
    You can create the following types of catalogs:
    Supplier catalogs
    Procurement catalogs
    Model service catalogs
    Note
    SAP Catalog Authoring Tool creates the master catalog, the SRM product catalog, SRM contract catalogs, and the contract catalog for service specifications automatically.
    When SAP Catalog Authoring Tool is used for the first time, you must open the Edit Catalogs application once, before you create any catalogs. Choosing Edit Catalogs triggers the creation of the master catalog. If you do not do this, SAP Catalog Authoring Tool outputs an error message when you try to create a catalog.
    We have already the Master Schema and we know how to map the CCM MASTER CATALOG to the supplier and procurement catalogs. The main problem is that we need to delete the CCM/MASTERCATALOG and created again.
    1. How delete the CCM/MASTERCATALOG?
    In a Test environment I have delete the CCM/MASTERCATALOG using the "Edit Catalogs" mode then choosing the catalog and confirm the deletion.
    Once this has been done, all the catalogs has been erased including the CCM/MASTERCATALOG, so now we have the system in blank. I am not sure if this is the correct way to delete the catalog or there is an easiest way where the Procurement and supplier catalogs don't disappear once the CCM/MASTERCATALOG is deleted.
    2. Once the CCM/MASTERCATAOG is deleted how to created again?
    According to the instructions the SAP Catalog Authoring Tool should created this automatically when is used for the first time, however how we can created the CCM/MASTERCATALOG again if the SAP Catalog Authoring Tool is not used for the fist time.
    Is there a way where the system can create the CCM/MASTERCATALOG for a second time?
    I follow the steps to create the CCM/MASTERCATALOG for the first time however I didn't get a positive result.
    Any help provided will be really appreciated.

    Hi,
    Generation of the /CCM/MASTER_CATALOG is automatic and does not require any additional effort from a catalog admin other than accessing the CDC (Edit Catalogs).
    If the catalog is not regenerated at this point it is likely that you then receive an error like 'Error reading catalogs, error reading Master Catalog' or something similar which would indicate that the previous deletion of the master from either table /CCM/D_CTLG or /CCM/D_CTLG_REQ was not successfully completed or that the update operation in table /CCM/D_UPD_STATE remained in update status and never for some reason completed (status 03).
    Deletion of the Master catalog should not cause the deletion of any other catalog, unless you have chosen 'delete all catalogs'! Choosing the Master and delete should result in only a deletion request for the master catalog, be aware however that all mapping records between Supplier -> Master -> Procurement catalogs will be destroyed and cannot be 'rejoined' but only rebuilt from scratch. It is also advisable after the Master deletion to chcek with report /CCM/CLEANUP_MAPPING which orphaned items and mapping records require cleanup as it is better to remove these before proceeding with the new mappings.
    Regards,
    Jason

  • No entry was generated in Master catalog after contract upload by PI...

    We use CCM 2.0 as percurment catalog in SRM 7.0 server.
    1.I finish the basic configuration and tranfer the product catalog to the CCM.
    2.Then I do the mapping of product cat to master cat.
    3.I finished the PI scenarios for upload contract.
    4.When I publish a contract in the potral, I check the PI monitor is fine.
    5.I check the CCM log more,but there is a warning message 'No original catalog item found for contract catalog item 1'.
    6.The contract upload successfully and it occurs in the ccm cataloags.
    7.The log showed that
    19.09.2010 16:09:01 (CET): Starting mapping
    19.09.2010 16:09:01 (CET): Starting mapping analysis for catalog 4400000049 -> /CCM/MASTER_CATALOG
    19.09.2010 16:09:04 (CET): Mapping completed for catalog /CCM/MASTER_CATALOG
    19.09.2010 16:09:04 (CET): Mapping completed for catalog 4400000049
    But unfortunately,there is no entry in the master catalog for this contract.
    Could you give me some suggestion?
    Much appreciated~~~

    Looks like the catalog was unable to be enriched from existing data - does this contract item exist in the SRM product catalog or a supplier catalog for enrichment to take place?
    Regards.
    Jason

  • CCM 2.0: Status of items is not changed in Master Catalog

    Hello all,
    when I upload the same items in Supplier Catalog in Master Catalog and Procurement Catalog for items status is not changed from "Approved" to "Not Approved".
    Funny thing is that items need to be approved to go to Procurement Catalog from Master and to publish Procurement Catalog.
    What to do?
    Gordan

    Hello Gordan,
    do you mean that in CAT customizing you have your /ccm/master_catalog with "approved" value and the name of your procurement with "To approve" value?
    Best regards
    Jorge

  • CCM - more schemas is master catalog

    Hello CCM Gurus,
    We're using CCM 2.0 version. We would like to make 2 schemas in our master catalog. When I tried, I succeed making it in a supplier catalog with uploading the structure in XML, but I couldn't manage it in case of master and purchasing catalog.
    If you have any solution that help me, please send it to me!
    Thanks and regards
    Almos

    Hello,
    As I am aware this is not possible. There was talk that this will be available in CCM3.0 which is canceled in favour of MDM/CCM.
    Gordan

Maybe you are looking for

  • Batch Level Changed

    Dear All, Actually i have changed the batch level form client level to material level because i have to assign same batch to another material , but while GR again production order through MB31 again same batch system gives the message batch is alread

  • Acrobat reader printing garbage characters

    Whenever I print using Acrobat reader default characters print as garbage, even when printing using "Print as Image".  Print preview looks fine but printer page shows mostly garbage characters.  For example, when printing the Sunday Crossword puzzle

  • GD80, Where is Temp Sensor 1, 2, and 3

    I am running speedfan to monitor fan speed and temps.  In addition to the core temps, it is showing Temp1, Temp2, and Temp3.  Temp 2 and 3 are always a good 10c higher than temp 1 (which is in the low 30's).  I am using a corsair H50 and am very happ

  • Nokia C6 charging down when Wi-Fi on

    Hi Friends, When I entered in to home or office it automatically to Wi-Fi as email accounts are configured in my mobile and I will be update to them and if there is no W-Fi it connects via SIM service provider (vodafone). My issues with always connec

  • Portrait Photos appear as Landscape Photos in Premiere Elements 9

    I created a photo slideshow in Photoshop Elements 9.  I then selected the slideshow, clicked on the 'Create' tab and selected make a DVD.  Once the slideshow was in the Premiere Elements 9 application, I did a 'Preview' and several of the photos form