Material should not goto quality stock after 105 movement

Hi Guys,
when we receive raw materials from vendor.
At present in SAP, after Gate Entry u2013 103 movement & Qty. Verification (release GR blocked stock u2013 105 mvmt.),
Item goes to under Quality and after Quality releases the same (321 movement), it transfers to xxx storage location (store).
For few items, we want the system to directly transfer the stock to xxx location immediately after 105 movement. Material has to skip under quality).
Can you please suggest the required settings need to be maintained.
Regards
Kumar

Hi Guys,
There are two materials ,For one material is directly going to Unrestrited stock after 105 movement.
Settings:In QM tab of MM,Procurement Data:Tick was there in QMProc.active.When we click Inspection Setup,Inspection Type :01,Active check box was ticked.
Fro Second Material is directly going to quality after 105 movement.
Settings:Settings:In QM tab of MM,Procurement Data:Tick was there in QMProc.active.When we click Inspection Setup,Inspection Type :01,Active check box was ticked.
Post to Inspection stock is ticked(Even though we removed it is not going to Unrestrited stock).
Apart from this is there any specific settings for these materials.
And also When they do the GR, 103 movement ,for one material when we check the log system displays the error message"xxx material is DOL item,pl enter the reason for movement.where we will mention that this material is DOL Item.
Regards
Kumar
Edited by: Gadwal Kumar on Mar 21, 2011 10:55 AM

Similar Messages

Requirement: Insp lot of self Certified material should not get skipped

Hi Gurus following is req pls suggest me
Requirement: Insp lot of self Certified material should not get skipped
if there is a change in Material Revision. As of now Auto Usage Decision
takes place on Self certified material Lots. This happens even after
there is a material revision. This is undesirable as QC is Not able to
ensure the implementation of design changes.
Apps

i have understood the following from ur reply
new revision created by design- purchaser creates po- materials comes in quality - auto skip
quality don't come into picture in ur scenario
solution :
new revision created by design - while creating po they will get error q info record for new revision not present- intimation to quality for creating q info record - decide whether to insp or skip it - normal process
use of q info record
in material master maintain control key for q info record.
create q info record for material, rev, plant , vendor
keep rest evertthing as it is - as a normal procedure material will be skipped
when any new rev is created - while creating po they will get error q info record for new revision not present- QC will get intimation regarding this new rev. -after all approval u can create q info record for this new rev. and then only purchaser will be allowed to create po.
make necesary chages in plan after every new revision

Service item should not post to stock

Dear Experts,
I have the following scenario.
I have a service material (DIEN). And created a PO with Account assignment M with SO. I have done the GR, accounting entries are posted as:
+ KBS --> CoGS
- WRX --> GR/IR Clearing
Account entries are correct. But when I check in MB52, stock is there as a special stock with E/SO number. But in my case, it should not post to stock.
How to achieve this? Kindly explain please.
Regards,
Sham.

Hello Biju,
I am using the AAC as "C" now. It is working fine.
I have an issue here. I will explain my scenrio. It is actually a trading process.
we trade machines as well as the service (Implementation of the machine).
1. Create Sales Order with Material and Service and it internally creates PR with 2 item to vendor X as follows.
   M MAT 1 EA
   C SRV 1 EA
2. When we recive the material MAT, we do the GR, it goes to inventory.
3. For the implementation of machine in the customer premise, we go with the vendor X and implement the machine.
4. At this point, we do GR for service and accounting entry created in COGS for the service
   + KBS --> CoGS
   - WRX --> GR/IR Clearing
5. Vendor X raise the invoce and we pay the vendor
6. But the problem is, we invoice the customer after a month or two based on our terms with the customer. so until we bill the customer, the service cost is lying as cost in COGS expense account.
Is there any way to clear it from expense account to some receivable account? And the receivable account should be nullified when we actually bill the customer.
Kindly let me know, if I am not clear enough.
regards,
Sham.

System should not pick reserved stock

Dear, MM Experts, i am sd Guy
i want to block Reserved stock while creating sales order
ex: 150 qty kept In reserve for customer , Total plant stock 1000
Now if user created sales order with 150 qty Normally system will pick 150 qty From reserved stock ( 412 E)
Here user requirement system should not pick Reserved stock 150 Bz in critical situation is there Like non production of stock
ex total stock in the plant 175 only there ( ex 155,180,200,170) So in this situation only system will pick Reserved stock 150
Otherwise Reserved stock should be in reserved place only bz if is not like this always we have keep stock in reserve
Thanks

Dear ,
as per my Knowledge If we Reserve the stock By OVZ9 Include sales req check box it will be unrestricted it wont go to sales order
when stock is not there you can reverse the stock to normal stock by using 411E
i think this is only solution
How to block material for a particlar sales order
Regards
venu

Sales BOM Header Material should not come in J1IJ or delivery

Hi,
We have one depot plant, Now i am using the sales BOM, I have created one Material header with item category LUFM pricing at item level only, BOM is created, When I am entering the Header material in SO then alll child items are coming, then while creating the delivery all the child items and also the header items is coming in the delivery but same is coming in the J1IJ also I want that the header materal should not come in the J1IJ and it will be better if it is not in delivery if i set the indicator delivery block for header materia in SO then that item si not coming in Delivery but SO is shoing in Open SO as the header material is not delivered.
So is there any setting for this.
Also in quotaion I have maintain the item category assignment I have assign QT - LUFM - AGN
but whhen I am entering the header material in VA21 Ffor which the item category is LUFM system is giving the error message
No item category available (Table T184 QT LUMF )
regards,
zafar
Edited by: zafar karnalkar on Nov 24, 2011 7:56 AM

Hi,
Yes I want that the Header material should not come in J1IJ only. but i check the program of J1IJ it is selecting all the materials ref. to delivery number without any further check. also is it possible insted of SO if first we create the quotation in quotation therr willl be header material as well as child item but in SO only child item should get copy when creating ref. to that quotaion, I try with item category copy control, but then system is selecting non of the materils from Quotaion to SO, and when I allowed coopy control of header material from Quotaion to SO then it is copying Header as well as child items in the SO.
regards,
zafar
Edited by: zafar karnalkar on Nov 24, 2011 10:53 AM

101 to be used only for unrestricted stock and not for quality stock

Dear Experts,
My client requires that mvt type 101 to be used for GR into ONLY unrestricted stock and not into Quality stock, if it requires we can create new mvt type as well.
Please let me know how to achieve this.
Regards
Abhi

You can set default value in MIGO for movement type and stock type..
Go to MIGO
The set default value for stock type as Unrestricted and movement type 101.
Then Go to OLMB-Settings for Enjoy Transactions-Settings for Goods Movements (MIGO)-Field Selection for MIGO
Here set the field Stock type as display..
Then check in MIGO
The field value will be unrestricted always and user will not able to change this..
Test the scenario and revert back..

Issue of material should not be allowed if stock not available on that date

All SAP Gurus,
If we have zero stock for a material on 01.02.2009.
We make GR on 10.02.2009.
Now, if we try to issue the material on 01.02.2009 (after making GR on date 10.02.2009).
Then system allows me to post the document.
We don't want to restrict the back dated posting.
Only we want to restrict the posting if stock for the material is not available on that particular date (because it results in negative closing stock for that date.
How it can be done?
Regards,

Hi
Try making M7/021 message as error message and issue the material which is not there in stock.
Thanks

How to revert stock in quality stock after qty issued with movemt type 704

Hi Experts,
User issued qty from quality stock to cost centre trough T-Code MI10. Inspection lot against the issue qty has status u201CREL CALC SPCO PRII CROK QLCHu201D This lot has been generated through mov 101 against PO (GR). After doing GR qty posted in quality stock. By mistake user has issued qty from quality stock to cost centre trough T-Code MI10. For same movement type was 704.
Now they want same qty back in quality stock also they want to do UD for the same. How to get back this stock in quality stock?
Awaiting for your expert reply.
Thanks and Regards,
Sandy

hi Sandy,
Quickest and easiest option without lot of configuration and process change for your scneario will be ,
The transaction code is MB0A.
The steps for executing the above trancode is as follows.
Inputs:-
Posting date : UD date.
Movement type : 102
Enter relevant plant, storage location, vendor and the material code
The purchase order/sch.agreement for the given vendor-matl-plant combination will be displayed.
Select the correct PO and click adopt selected.
The material with quantities to be reversed will appear in various line items. Select the correct quantity for which the reversal to be made.
Click adopt + details
Enter storage location
Remove "X" in the stocktype field
Save.
Material document will be generated.
The correct material could be inwarded again and correct usage decision can be taken against this lot.
Get approval from Materials and Finance guys.   As long as your accounting documents nurlifies each other , you should be good to go.
If not you have to use the same proess   witht twiests , with other movement types for which you have activated inspection type.
Hope this helps
Cheers
Rav

Deletion material should not batch determine

Dear All
please help me.
Deletion flag set on material number then. How can this material number should not tack automatic batch determine during batch determination in process order.
and warning MSG should be display.
Thanks in advance...........
Jainashu

Do you already have the batch search strategy for that particular material ?

HT1329 IT SHOULD NOT BE THIS F&*^%$# HARD TO MOVE TO A NEW COMPUTER

Followed every step to move to a new computer and the instructions were so incredibly dense I think I flubbed a step. It tells you to drag the Itunes folder on the new computer to the desktop. I did that and then copied the itunes folder from the ipod as a disk to the desktop itunes file. This is where I think I went wrong. Unfortunately it took me awhile to figure this out and I already had deleted the created file from the ipod as disk. I moved the desktop file back to my music and now I believe I just have my files a little too deeply embedded in my music folder. I have two >itunes in my path. Is there a easy way to correct this without starting from scratch?

It is important to keep the "big picture" in mind when you do this procedure. The procedure covers ALL the possibilies, and many of them do not even apply to your situation.
Here's the big picture... When iTunes runs, it looks for the iTunes folder in your user account home folder. That iTunes folder is located in Music. On your old computer, you should have copied that iTunes folder (after doing the "consolidation" steps) to the iPod (which is being used like an external drive).
On your new computer, iTunes is using its iTunes folder. So, what you are doing is moving that existing iTunes folder "out of the way." (iTunes should not be running when you do this.) If you don't have any new songs on the new computer, you can just delete that iTunes folder. Now, copy the iTunes folder from the old computer (on the iPod) to that same location, to take the place of the new computer's iTunes folder. Now, when you run iTunes, it will find your iTunes folder from the old computer and use it. iTunes will look like iTunes running on the old computer.
So that's a summary of all of those low-level steps. (1) Make sure everything related to iTunes data on the old computer is in your iTunes folder. (2) Copy that iTunes folder to an external storage device. (3) Connect external storage device to new computer. (4) Replace existing iTunes folder on new computer, with the iTunes folder from the old computer.

Qty in MIGO of Input material should not be editable

Dear All,
While making GR for subcontract PO we are entering GR qty for output materials but system is also allowing to change Input material qty (543 Mov type) and we need to restrct the same i.e. to make uneditable.
Pl suggest.
Regards,
Vimlesh

there are hundred options to create wrong or double postings in SAP.
Have a look at the physical process. What drives a user to enter a movement?
In our company it is e.g. a receipt from a subcontractor. Usually the carrier hands over documents that will be the basis. The receivers usually check the data written on the paper with the goods they got physically.
The they try to enter this in SAP and check again whether the paperwork matches with the data they get in SAP.
Why should one change quantities in an event of posting a receipt?
Most probably because he wants to enter the quantities he physically got, or the quantities that are stated on the documents.
Talk to the people who making you headaches and ask them why they are changing quantities, then fight the root cause. if the root cause is a receiver who fools around, then talk to your HR managment. But I am sure he does his best to enter into the system what he finds on the paper. Maybe he needs some extra training and need to understand the why behind your demand.

Material is not going to quality inspection by default in PO

Hi Experts,
I have ticked post to inspection in material master QM view, dont want to genarate any lot .as per standard this should get copied in PO and while GR material should go to QI stock.But when we create PO it is showing unrestricted stock and while GR it goes to unrestricted.
Manually i am able to change from unrestricted to QI while saving PO.But client want it should happen by default QI stock.
Thanks.

Hi Sankur,
I just went through your remarks. What I have understood is, you want stock to get posted to quality inspection without inspection lot generation.
The setting which you have mentioned is correct. Probably the reason why the setting is not getting copied into PO for stock type, is the change of settings after PO creation. I explain you what I tested. Letu2019s have a look on following sequence.
1.     In material master Post to Inspection Stock tick is NOT activated.
2.     No inspection type is activated
3.     PO is created
4.     PO is released
5.     "Post to Inspection Stock" is NOW TICKED. (After PO creation but before GR)
6.     Goods receipt through MIGO
If you change material master, it would take effect from next purchase order.
Regards,
Anand Rao
Edited by: Anand Rao on Apr 29, 2011 3:05 PM

Quality stock or not

Hi,
usually at goods receipt (MIGO with code 101) the material is transfered to quality stock,
because in the material quality view the inspection setup is set.
For some GR we don't want a transfer to quality stock, so in MIGO we selected a different stock type (unrestricted use), but this selection does not have any impact.
Is there any way to choose whether the material is transfered to quality stock or not, without changing the settings in material master ?
regards
Iring

Hi,
If you have activated the QM at material master, then the option of stock in PO has no effect on the stock posting at GRN. You have following option -
1) Maintain Quality Info Record for the vendors for which you don't want the stock to be posted to quality inspection & maintain that the Vendor is certified & No quality inspection at GR. For this you will have to maintain appropricate key at material master QM view stating that the delivery relase is required. (Hence you will have to maintain delivery release also in Quality info record)
2) You may remove tick of 'Post to inspection stock' from the respective inspection type in material master QM view, befor posting the GRN.
Regards,
Prashant

STO delivery should not happen for shelf life expired material

Hai all,
When we are doing PGI for STO-PO. shelf life expired material should not do the delivery.The system should give the error message. but in our system when we do PGI the shelf life expired material is deliverying.
how do we maintain the error message when we doing PGI.
Edited by: hemanth s on Sep 12, 2008 9:37 AM

Hi,
In Inventory management there is a which helps you "Set expiration Date Check". This allows you to make sure that the shelf life of the material is checked before delivery.
In Material master, you would need to enter relevant information in the "Plant Data/Stor. 1" tab page (Min remaining shelf life, total shelf life). Also in IMG settings, you need to activate the check for both Plant and movement type. The path is as follows:
IMG Settings > Material Management > Inventory Management and Physical Inventory > Goods Receipt > Set Expiration Date Check. TCode: OMJ5
Cheers.
Edited by: Sowmya Mohan on Sep 15, 2008 8:43 AM

Invoice block for quality stock

Hi
How to block the material for invoice payment i(MIRO) which is laying as the quality stock after did the GR against the purchase order.
for our case, while check the OQB1- the block not happen for the particular material
but for other materils it working fine

Hi
i checked the condrol key . it have the tick mark in blocked invoice and released required.
and more same thing is maintained in another material which is got the invoice block while do the miro.
so it may not be related to material master, q-info record.
so pls tell me anyother posibility which is particular to material and vendor basics .

Material should not goto quality stock after 105 movement

Similar Messages

Maybe you are looking for