Material specific value contract

Hi SAP Gurus,
I have a problem while creating material specific value contract WK2. After creating the value contract for INR 50000 and doing the neccessary settings in item category WKN, i created a relaease order with value as INR 500.
I can see the release order in the documnet flow of the contract, but in the contract overview screen value released is not reflecting, which i am expecting as 50000-500 = 49500. So the value released should reflect as INR 500.
Please correct me if i am wrong.
Regards
S R Sahoo

Dear Friend,
Thanks for your reply. I have already done the following settings.
In VTAA I have already set the Cont. item copy mode to B for both
WK2 to WA and WK2 to OR.
Please suggest further.
Regards,
S R Sahoo

Similar Messages

  • About the value contract

    Pls guide me
    I am creating the value contract.
    Condition type is BP01 and its value is 251.00 INR.
    But Base Amount of the that material is not reflect in the Taxes.
    How to get it in the base Amount.
    My condition type is BASB.

    Hi ...
    read below as to why u need a dummy material for value contract i.e WVN has this dummy WKM1
    Value contract type WK 2
    You can create contracts for one material (usually configurable) with this type of value contract. A software company is an example of where this kind of contract is often used. There, a contract for the value of $500,000 is made with the customer for one specific software product.
    You can also agree on the length of the contract for this type. The contract duration can be agreed at item level and can be different from the contract duration specified at header level.
    Regards
    reward if undestood the significance
    Krishna

  • Reg:  User Manual for Value contract

    Hi ALL
    Can anybody send
    usr manual for Material related value contract with milestone billing
    Regards
    Rams

    Hi,
    just mark your question as 'Answered' and give some comments.
    Thanks.

  • Configurable Material : error while creating value contract

    First snapshot of our Configurable Material  'Material 01'
    In MM03 > Basic Data 2
    under Client specific configutarion
    Cross-Plant CM : (material 01)
    Varient (checkbox checked)
    In MM03 > MRP1
    MRP Type: PD
    In MM03 > MRP3
    Plant-specific configuration
    Configurable Material : Material 01
    Varient (checkbox checked)
    Planning Varient (checkbox checked)
    When we are raising value contract, we are getting error
    'Material 01 has status: Configure to Order'
    In Item category assignment we have assigned Zw1 (value contract doc type) on lines of 'OR doc' type  as follows
    SaTy ItCGr Usg   HLevltCA Difftc MltCa
    Zw1  0002  blank blank    TAC    TAM
    Zw1  0002  blank TAC      TAE   
    Zw1  0002  blank TAE      TAE   
    Zw1  0002  blank TAM      TAC   
    Still we are getting same error .how to resolve this.
    Thanks
    Rohit

    closing...

  • Value contract with overall value and material list

    Hi
    I want to use value contract in CRM.
    Is there is any option except using product range/assortment to maintain list of materials and overall value for the contract?

    Hi,
    follow this link
    http://help.sap.com/saphelp_46c/helpdata/en/75/ee0f4055c811d189900000e8322d00/content.htm
    You will get the idea about item category W in value contract (WK )
    and also about the price conditions in item and header level.
    Edited by: redriver on Nov 28, 2011 6:31 AM

  • Material specific ( urgent help required)

    hi abapers,
                       i have a problem in user exit, my client want the tcode me11 material specific,  in tcode mm02 he want to give the maximum value (commercial price 15rs.) at the time of creating info records(using me11 tcode) if an end user enter a value greater then the value of commercial price then they want a error message will appear for this condition ( entered value is grater then commercial price) and he don't want this report vendor specific.
    thnks
    pardeep

    Hi Pradeep,
    Below exits are for ME11  T-code you can select particular exit and write the code based on the MM02 fields. take the data base fields which you want to pick from MM02 and validate in ME11 by writing the code in exit.
    LMEDR001            Enhancements to print program
    LMELA002            Adopt batch no. from shipping notification when posting a GR
    LMELA010            Inbound shipping notification: Transfer item data from IDOC
    LMEQR001            User exit for source determination
    LMEXF001            Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001            Customer-Specific Source Determination in Retail
    M06B0001            Role determination for purchase requisition release
    M06B0002            Changes to comm. structure for purchase requisition release
    M06B0003            Number range and document number
    M06B0004            Number range and document number
    M06B0005            Changes to comm. structure for overall release of requisn.
    M06E0004            Changes to communication structure for release purch. doc.
    M06E0005            Role determination for release of purchasing documents
    ME590001            Grouping of requsitions for PO split in ME59
    MEETA001            Define schedule line type (backlog, immed. req., preview)
    MEFLD004            Determine earliest delivery date f. check w. GR (only PO)
    MELAB001            Gen. forecast delivery schedules: Transfer schedule implem.
    MEQUERY1            Enhancement to Document Overview ME21N/ME51N
    MEVME001            WE default quantity calc. and over/ underdelivery tolerance
    MM06E001            User exits for EDI inbound and outbound purchasing documents
    MM06E003            Number range and document number
    MM06E004            Control import data screens in purchase order
    MM06E005            Customer fields in purchasing document
    MM06E007            Change document for requisitions upon conversion into PO
    MM06E008            Monitoring of contr. target value in case of release orders
    MM06E009            Relevant texts for "Texts exist" indicator
    MM06E010            Field selection for vendor address
    MMAL0001            ALE source list distribution: Outbound processing
    MMAL0002            ALE source list distribution: Inbound processing
    MMAL0003            ALE purcasing info record distribution: Outbound processing
    MMAL0004            ALE purchasing info record distribution: Inbound processing
    MMDA0001            Default delivery addresses
    MMFAB001            User exit for generation of release order
    MRFLB001            Control Items for Contract Release Order
    AMPL0001            User subscreen for additional data on AMPL
    if you give me exact requirement and i can help you out.
    Thank you.
    Regards
    Ram

  • Usage of Configurable material in quantity contracts

    Hi Gurus,
    We have a scenario like material type is configurable material.We have to use this material while creating volume / value contracts... But in standard we  do not hvae option of determining the item categories for the combination of CQ (quantity contract) + 0002 (item category group) = nil.
    Can anyone suggest me a wayout for this....
    Regards
    Bhushan

    Configurable materials ae typically Made to order and stocks are created for specific orders and i believe we may not be able to maintain contracts for them. What can be done is we can explore the option of Part matching. For a particular combination we can create a standard material and create a contract for that.
    I hope this helps.
    Regards,
    Mani

  • Value Contract

    Dear Experts,
    I need your help. I checked in the definition of WKN that a dummy material called WKM2 has to be assigned in the IMG settings against " Value Contract Material" then only the creation would proceed.
    Can someone guide me as to how to create this dummy material? and what are the steps involved in the processing of a value contract?
    Please advise.

    hi,
    Value contract type WK 2 (material-related)
    You can create contracts for one material (usually configurable) with this type of value contract. A software company is an example of where this kind of contract is often used. There, a contract for the value of $500,000 is made with the customer for one specific software product.
    You can also agree on the length of the contract for this type. The contract duration can be agreed at item level and can be different from the contract duration specified at header level.
    In order to achieve technical control of value contract items for value contracts referring to an assortment module or a product hierarchy, you need a material in the item. This is, for example, important for controlling control derivation and statistics update. You can set this material as default. This predefined material is then automatically copied into the item. The item category group for value contracts must be assigned to the material in the material master. If a material is entered, then the item category is created for the value contract. This item category is taken from the item category group in combination with the sales document type.
    Procedure
    To create a value contract, proceed as follows:
    In the initial screen, choose Logistics ® Sales and distribution ® Sales.
    Choose Contract ® Create.
    In the Contract type field, choose Value contract, and enter the required organizational data.
    The values for sales organization, for distribution channel and the division are usually proposed from user-defined parameters. Entries for the sales office and the sales group are optional.
    In the standard system, the following two sales document types are defined:
    – Value contract general (VC1)
    – Value contract general (VC2)
    Choose Enter.
    Enter the following data:
    – Customer number of the sold-to party in the Sold-to party field.
    – Customer purchase order number for this document
    – Validity period in the Valid from and Valid to fields
    – Description of value contract
    – The master contract number (see also Master Contracts)
    – Material number(s)
    – Target values for the materials
    The target value is the planned entire value for the material in the contract.
    – only for value contracts not referring to material: Product hierarchy and/or assortment modules
    Additionally, you can define contract duration for the value contracts VC2 in the Contract start date and Contract end date fields. You can define both contract duration and header level per item. The contract duration at item level can be different to the contact data at header level.
    Choose Enter.
    If you want to enter further data for the header or items, select the corresponding menu entry. If you wish to change data for an item, select the item before you choose the menu entry.
    Enter all the necessary data.
    Save the document.
    pl reward if it helps.
    Thanks,
    Sadhu Kishore

  • Help on Value Contract - Pricing Procedure.

    Hi, I am trying to create value contract.
    I have created a contract for specific material (WK2) with the target value. The pricing procedure is WK00Z with only one Ctype  WK00. Condition Records are maintained for WK00 for customer / material.
    When I create a release order, the unit pricing of the material is Target Value provided in the contract and getting multiplied by the quantity, instead of the price provided in Condition Records created.
    Can any one tell me how to fix this error.
    Sunil

    I assume you create the order with reference to the contract and have copy control setup between contract and order.
    At the item level copy control, what <u>"Pricing type"</u> have you used?
    In the same place, what is the setting for <u>"Contract item copy mode"</u>?

  • How to create release order for value contract?

    dear experters,
    I create a value contract by T-code:va41, order type"WK1".I set a Assortment module to this order and mateirl "WKM1" to  it.
    then I create release order by T-code:va01 with refrence to this value contract,but it set the material "WKM1"  to the sales order, and I can't modify this material! I want to put another material which belong to the assortment module in the value contract. I want to know how.
    thanks.
    Best regards
    lance

    Assortment Module for Value Contracts
    This function enables you to define a list of materials that can be released from a value contract. Materials can be assigned to more than one assortment module.
    An assortment module is an entry tool and can be called up from the value contract. It is valid for a certain time period.
    If you delete a material from the assortment module, to which a value contract refers, you will be unable to release that material.
    In the value contract, only materials with the same sales organization and distribution channel as the value contract can be taken from the assortment module. All the other materials in the assortment module are not displayed in the value contract.
    To fulfill both these requirements, two types of value contracts are offered in the standard system:
    Value contract type WK 1
    You can specify a product hierarchy or a assortment module for value contracts with contract type WK 1. The system will always propose this type of contract, if you want to create a contract for several materials or a certain group of materials. All the materials in the relevant assortment, or belonging to the specified product hierarchy are then relevant for release.
    Value contract type WK 2 (material-related)
    You can create contracts for one material (usually configurable) with this type of value contract. A software company is an example of where this kind of contract is often used. There, a contract for the value of $500,000 is made with the customer for one specific software product.
    You can also agree on the length of the contract for this type. The contract duration can be agreed at item level and can be different from the contract duration specified at header level.
    You can store special price agreements for the value contract. These price agreements can then be used at any level. For example, a value contract can contain prices for individual materials, or discounts that are valid for every released material.
    Release Orders
    The customer fulfills a contract by issuing orders against the contract. The contract does not contain any exact dates for deliveries, so you need to create a sales order to release against a value contract.
    When a release order is created for the contract, the system automatically updates the released values in the contract. The release order value is calculated from the total of the open order and delivery values, plus the value that has already been billed to the value contract.
    The system also updates the released value for subsequent changes (for example, overdelivery of contract release, price changes in the billing document, partial deliveries, returns, rejection of order items, cancellation or reversal of orders, deliveries or billing documents).
    You can create a release order in any currency. The system automatically converts this currency into the one agreed upon in the value contract on the pricing date for the contract release order.
    Creating Assortment Modules for Value Contracts
    Procedure
    To create an assortment module, proceed as follows:
    1. From the initial screen choose Logistics >Sales and Distribution >Master data.
    2.Choose Products >Value contract - Assortment module > Create.
    You will then be in the Create assortment module: Initial Screen.
    Module type 6 is defined for the value contract.
    3. For external number assignment, enter a module number.
    You can then use existing modules as a reference by entering the name of the module under reference.
    4. Choose Enter.
    5. Enter a short description for the module.
    6. Enter a validity period for the product proposal.
    During a release, the system checks if the release date lies within the validity period.
    7. Create the materials that you wish to assign as items to a module.
    You can display a list of materials as a product proposal, which you can then copy into the assortment module. To do this, choose Suggest material, enter the selection criteria in the subsequent screen and copy the selected materials to the items. Use Edit > Delete item to delete the materials that you do not want to copy to the assortment module.
    8.Save your entries.
    Also Please check the copy control in VTAA
    Regards,
    Anbu

  • Value Contract vs. Qty Contract

    Hi All,
    For Value Contract the system asks for Target Value in the header of the Contract. For example, if the target value is 10,000USD and I enter in the Target Value field in the contract and when I goto Item Overview the system's asking for Target Qty and Unit Price. Does the total of all the line item have to addup to the Target Value in the Header? I still can save the contract with the target value as 10,000USD and just a single line item with value of 50USD.....This doesn't make any sense.....Why is the system asking for "Target Value" when the line item can be under the Target Value???? Then what is the purpose of Value Contract?
    Any explanations for this?
    Thanks in advance.

    Hi
    Contract is the document that consist of terms and conditions (say Max value as you said 10000USD, validity date in value contract) or (maximum qty and validity date in qty contract).
    The document created with T.Code ME31K is known as Contract.
    With respect to This we need to create a release order in ME21 specifying delivery date, qty and price to supply it to vendor. You can create relese order upto the maximum value or qty specified in the contract with in the validity date.
    For given contract document you can create N number of release orers (but shoild be with in max value and validity date).
    USES:
    This type of document is used where there is bulk requirement of material/service is needed.  At each time they won't create PO, they will have an agreement with the vendor and send the signed contract document and vendor will supply/provide service as per our requirement.
    Our requirement is specified in relaese order.
    Hope will be helpful for you.
    Rgds
    Srini

  • Release Order for Value Contract WK1

    i dont want to create sales order with referance to contract.
    i have done below.
    1. i created assortment module in wsv2 tcode for value contract
    2. i created value conract (type WK1) in va41 tcode
    3. i created (messages about outline agreement) "check at item level and copy if unique" sales doc type OR in tcode vov8
    so, when i created a sales order (OR) without referance to value contract, i want the sales order to find the related contract at item level and copy
    but sales order cant find the material in the assortment module that i created in contract type wk1.
    where am i doing wrong?
    Edited by: manas han on Jul 6, 2010 11:14 PM

    Hi,
    Firstly, I assume you have properly setup all the copy control of of the document types you want to use and also properly defined the document types and item categories you want to use.
    Maybe you want to check/try the following: -
    1. Check the validity of the assortment module you have created.
    2. Try to create the assortment module again using tcode WSO1.
    3. In your Order Type "WK1" and under the "Contract", maybe include the subsequent Order = OR
    4. Check that your material has the product hierarchy properly setup?
    5. Finally, try to use indicator "B: check at item level" instead of "D: check at item level and copy if unique". You would not get a dialog box in OR if you use indicator D as it will automatically copy to the OR if there is exactly one reference document created.
    Hope this helps.
    Thanks.

  • Discount issue on a value contract

    Hi Experts,
    I have created a value contract which contains 4 materials.
    I have put a Discount % on Gross of 5 % on the header thinking that it will have an effect on the target value but when I create a Contract Release Order it's appears on the material item level.
    How can I put a discount on the target value, please ?
    Thansk in advance,
    BR,
    Cesar

    Thanks for the quick reply.
    I would like to create a value contract which contains material to be release against the conrtact.
    I have a target value on the header and the contract contains 4 materials (I do not want to put any target quantity at material level, only price)
    Requirement: I would like to create PO's with the contract release order functionality and to put in the PO the material (contained in the value contract) I need.
    But: I don't want to put any target quantity on material level (just a price) and I need the system gives message if the target value (on the header) is exceeded by the total amount of the material release against this contract (in all the PO's created)
    Can I manage this ?
    Thanks in advance.
    BR,
    Cesar

  • Problems in creating a Value Contract

    Hi,
    I'm trying to create a value contract using VA41.
    The process succeeds for one sales organization, but for another sales organization, I am getting a line in the document incompletion log, saying G/L account data is missing. This is despite the fact that a G/L account IS assigned to this sales organization in VKOA. Even when doubleclicking the error message, and getting to the Analysis Account Determination, it is clearly seen that the system did find a G/L account!
    After getting deeper into this, I found that the problem is caused by the item category of the contract line item, which has Revenue Recognition category B (Service-related revenue recognition). If I change this value to blank or a different value in the item category definition (VOV7), then I am able to add the line and save the contract.
    The question is whether there is a place where this sales organization (or the company code above it) is defined not to be able to accept lines with Revenue Recognition B? Or maybe I am misunderstanding this whole thing, and the problem is of a different kind?
    Thanks in advance for your help,
    Amit

    Hi Sri,
    Thanks for the quick response.
    The item category group is not NORM but our company's own item category group - YNOR.
    This is not the issue, as this item category group is assigned to the material also in the sales organization that works...

  • Value Contracts question

    Hello All,
    We want to use Value Contracts in our organization. I was testing
    release orders created with reference to the value contract.
    If I create sales order 1 with reference to the value contract, the
    system updates the 'value released' of the value contract with the sales
    order 1 value. However, at times, we have a requirement to create sales
    order 2 with reference to sales order 1. In this case, the 'value
    released' amount in the value contract should be increased by the sales
    order 2 amount.
    Also in certain cases (like consignments), the subsequent sales order
    values might be a credit. In this case, the 'value released' in the
    value contract should also be credited accordingly.
    Currently, in both cases, when subsequent sales orders are created, the
    'value released' in the value contract is unchanged.
    Can someone please tell me if a value contract can be made to look at
    all subsequent orders to update its 'value released'? If yes, could you
    please tell me how?
    Thanks,
    Rugmani

    Thank you for your response.
    Such a  requirement arises in case of Consignments. We are using consignment orders (fillup, pickup, issue, return) for the customer. Hence, we create a consignment fillup order when we are sending out a material. If the customer returns the old material within a specified time, he should not be charged for it. Else, he would be charged and in this case, a consignment issue needs to be created. If, in special cases, we decide to accept the old material (beyond the warranty return period), a Consignment return will be created to credit the customer.
    When the value contract comes in play, we need to deduct the value remaining for the customer when we create a pickup, increase the value remaining when the customer returns the material etc. The problem occurs when the amount needs to be put back. As the consignment orders need to be created with reference to one another, there is no link to the value contract and hence the value remaining does not get updated correctly.
    Please let me know if you have any suggestions for this requirement.
    Thanks,
    Rugmani

Maybe you are looking for