Material Tax Classification

Hi Gurus,
Need a little suggestion for a doubt -
I accidently changed Material Masters data of some items, after running a faulty LSMW
When I look at the change document for some of those articles it says -
Change Tax classification article 1 Ireland
So I believe it has changed the tax classification for this article ONLY for Ireland
when I reversed the change .. it says ..
Change Tax classification article 1 Full tax 0 No tax Ireland Output Tax
I have a few doubts .. first , is this changed only for a single country or for all of them .. & if I have reversed the changes ..
Plz suggest what shall I do to make it as it was ...
<< Moderator message - Please do not promise points >>
.. many thanks for your help
Edited by: Rob Burbank on Feb 7, 2011 3:54 PM

The tax classification section is dynamically defaulted based on the plants that are linked to your sales area.
for each plant country you will see an entry.
if such an assignment is made after go-live, then with the next change of material master you are asked to complete the classification.
This cannot be undone. you can just change it to another value if the value you entered was wrong.

Similar Messages

Updating the Customer & Material Tax Classification via LSMW only

We need to update the Customer and Material Tax Classification via LSMW only, in such a way that on the updation of the Tax classifications the Customer Master and the Material Master should be updated automatically.
Please let me know if anyone has done the same also it would be really helpful if you can provide me the details.
Regards,
Arindam

Hi,
It's not clear your question to me.
Do you want to update the Tax classification in the customer master & Material master?
I did same, but with 2 different LSMW"s as there is not link between customer master & Material master.
To update customer tax classification -
In that you have to feed relevant customer numbers with sales areas & relevant tax classification for one LSMW.
To update Material tax classification -
In that you have to feed relevant material numbers with sales areas & relevant tax classification for different LSMW.
Best regards,
Anupa

Add material tax classification to company code

Hi gurus,
hope you can help me with this one.
i need to add/extend the material tax classification to a company code... how would i do that.
appreciate your help.
thanks in advance

Hello Brett,
I am facing the same issue. Can I know how to change the country defaulted to the country where I can to create?
Thank You.

Dispaly material with key field customer based on tax classification

Hello all,
Material is classified based on tax classification as products and goods.I need to dispaly these of either for some customers.
Client is saying me to use the table MLAN(Tax Classification for material).
Can anybody suggest me how can i pull the material part/service part(matnr) from the table (MLAN) based on tax classification(TAXKM) with key field customer(KUNNR) when this table does not have customer has key field in it.
Thank you,
Sirisha

Hello all/Brad,
Requirement is , i need to add and dispaly material data in a column with heading as tax classification in ALV Report for the customer.
Ex: Customer 11094 brings material 336047-B21(Product)
Customer 10973 brings material LDMSPMAP-M (Service)
Material is classified as per the tax classification as Product and Service. If tax classification is 1 then it is Product and if the tax classification is 2 then it is Service.
So i'm trying to pull the material(Product/Service) based on tax classification with customer as key field.
Customer is coming from customer master data.
So i have used MARA table which has all three fields (Customer,Material,Tax classification) to get the required information but the table does not have test data for customer.So i told my client to update mara table with customer and tax classification data.
But my client told me to use MLAN table because they have updated the data in this table.But unfortunately this table doesn't have customer field to pull the data.
So that is the reason, i put the above question in the forum.
PLease help me in solving this issue.
Thank you,
Sirisha

Change Tax Classification in Sales Order

Hi all,
I have a question about tax classification in sales order.
I know that taxable or non taxable is determined by a variety of key (by material, order type, departing country & destination country, etc).
I use Domestic Taxes as a key to determine taxable or nontaxable. To do that, I need to set up tax classification in customer master and material master, right?
Based on that combination, I can determine if it becomes taxable or nontaxable and if so by how many percentage.
OK.
Here is my scenario:
The customer and material I use to create sales order is set as taxable. So, when I create an sales order, the tax and its % is automatically presented in conditions.
But how do I do if I want to make only this sales order be nontaxable?
I changed Tax classification from '1' taxable to '0' nontaxable in Billing Document Tab at Item level, but tax is still there in Condition Tab.
I thought taxable or nontaxable can be changed by this way. Am I missing some procedure?
Regards,
Screen Field:VBAP-TAXM1

Hi,
When you set the tax condition to your country and set the tax rate in VK11 based on the customer tax classification and material tax classification, it should pickup in the document.
How can it posssible to have tax for one document and no tax for the other. Tax is uniform, and it will be applicabe to all customers (certain exceptions also there). In any case the customer is not taxable ot material is not taxable, maintain the customer / material tax classification as '0' and don't maintain any condition rate for that.
Prase

New field for tax classification (Pricing)

Hi
The scenario is - we need to map a taxes from R/3 to CRM. for this we cant use MWST , as this tax condition is already being used in the current process.
If we use another condition type then the tax classification for Material doesnt get picked in CRM. So according to the SAP note -336235, we have done the development.
+The developments includes + - new field created for material tax classification purpose and this field assigned to Pricing structure KOMP and KOMG. we have also maintained condition record by using this field , but the data is not being read by this field during the calculation of taxes in sales order (R/3).The data is exist in material master -Sales org1 tab -Tax classification (1 or 0).
Could anyone let me know, that how the tax classification data can be read from material master for this new customized field.
Thanks in advance.

To use a custom field in pricing, you need to do two things:
1. Add the field to KOMP and KOMG and
2. Move the appropriate value in a user-exit.
Your post says that you have done 1. above. Have you coded the user-exit for 2. above? The user-exits are in MV45AFZZ.

Tax classification fields are not appeared in master data

Dear Experts,
I searched the forum about my issue but i did not get any solution.
I am not able to see the tax classification fields in customer master and material master.Even i assigned Country IN to JLST and JCST condition types by T-code OVK1.
FYI
I have copied the org elements from standard (which are already given by default).Initially i was able to see 2 different countries with tax MWST in both customer master and material master.
EX:
AT MWST
DE MWST
But i do not wanted these. so i deleted these assignment from OVK1 and assigned country IN to JLST and JCST,and i went to customer master and material master but those fields are not appeared.
Note:Country of plant,company code and sales organizations is IN
Help me to view tax classification fields in Master data.
Thanks&Regards
Ravikumar.R

Then how system knows this customer is liable for JLST.
In customer master, under the Taxes tab, it would be like
Country::::Name:::::Tax Cat.::::Description::::Tax Classification
While creating customer master, if your configuration is in line with standard, then under the tab Tax category, you can see MWST flowing automatically. You just have to input tax classification as 1, 2 etc.,
Also since as you said above, you are maintaining the combination of country/plant region/customer region/customer tax classification/material tax classification, you can very well differentiate VAT & CST.
Wherever customer region comes as your plant region, assign VAT tax code and wherever, customer region differs from plant region, assign CST tax code in VK11.
G. Lakshmipathi
ps: please spell the name correctly

Derivation rule to determine customer tax classification in COPA

Hi Experts,
Please guide me to complete this assignment.
The requirement is to fetch the material tax classification and customer tax classificaion into COPA through derivation rule.
we can fetch material tax classification through table VBRP.
Please help me to derive customer tax classification( KNVI-TAXKD) through derivation.
Customer tax classification data is available in table KNVI.
But when you consider KNVI table through table lookup it is asking customer, country key and tax category. To define this derivation rule we need tax category values in COPA.
We can get customer and country key but not tax category.
How to bring tax category (KNVI-TATYP)
into COPA to define derivation rule to fetch customer tax classification( KNVI-TAXKD).
Please suggest me if any alternative solution to bring customer tax classification data into COPA.
Points will be assigned to usefull answer.
Thanks in advance.
Regards,
Amar.

HI,
The Tax related thing are balance sheet items . which can not be considered at CO-PA.
only revenue item will be considered at Co-pa.
Hope this is clear
With regards
krishna

Tax classification clarity needed

Dear Experts
In customer master data in billing tab we will give ex 1 full excise with 12.5% and 2 full excise 3% cst now if i create ne tax classification , then what all the setting i need to make , how it flows can any body help me in this regard
Thanks
Basavaraj

Hi,
First of all, which is the tax procedure you are using?
If its TAXINJ, then you create the new tax classification using OVK3 for UTXJ condition.
Maintain the tax classification in customer master for UTXJ & create a new condition record (tax code assignment) for the country/plant region/cust.tax classification/Material tax classification using VK11/VK13.
If you are using TAXINN, Maintain the tax classification in OVK3 & assign the same in the customer master to the tax condition mentioned in OVK1.
Maintain the condition record for the above condition for the new tax classification combination in Vk11 & Check.
Thanks & Regards,

Routines for determine the customer tax classification in VF02

Hi
i have to find out how the customer tax classification values is coming in VF02.customer tax classification value should be '0'.but in my case it is coming '1'.
i have to find out ,how the calculations has to be done and where should i modify the value.it is an production support issue.
Please guide me .what are the possible ways to fix the issue.
Regards,
Kiran

I'm assuming that, the country is India and based on its requirement:
Sales tax is a state government revenue. There are two types of sales taxes, Local sales tax & central sales tax. Local sales tax is intra state whereas CST is inter state.
Example of LST : Point of sale i.e. delivering plant & ship to party are within the same state. The rates are defined by the respective state governments.
Example of CST : The Delivering plant & Ship to party geographic locations are 2 different states. At the point of sales from one state, the ST goes to that state govt. & consignment is despatched to the Ship to party. Once that consignment is received at the ship to party state, sales tax will be levied once the sales is registered there. For this case, the LST that is applicable by the Ship to party further will not be applicable in all probability to be captured in SAP.
Stock transfer : This does not attract any sales tax. The consignment is transferred from one D plant to another D plant irrespective of inter/intra state sales. The invoice that is accompanied with the consignment thus shall not have any final value. It's a zero value invoice, but the basic prices needed to be mentioned.
The selling organisations normally needs to register with the sales tax authority of the respective state to have a warehouse or D plant to avoid the double taxation for their dealers/distributors.
Now, the pricing procedure that is there in 4.7 is Factory sale with formula-JFACT, in which the CST condition type is JIN1 & the LST is probably JIN2. There may be surcharge cond types as well which will calculate the amount on either JIN1 or JIN2.
For config :
1.SPRO > S&D > Basic fn. > Pricing > Pricing control > Define & assign Pric. procedure > Maintain Pric proc.
2. The tax rates are normally driven from the Tax classification of Customer & Material access. To do this config, S&D >Basic fn. > Taxes. You need to include the condition type for country IN in 'Define tax determin rule'.
3. Same path : But go to Tax relevancy of master records where you configure the condition type & options of rates that will flow to these masters. One needs to understand here properly as u need to have unique combinations for picking the sales tax rates. I will try to demonstrate the smallest example. Let's say, the LST rates are 2%,4% & 0%. I will have two options for material master here. 1 for taxable & 2 for not taxable.
For customer master, I will have 1-LST 2%, 2-LST4% & 3-LST0%. When I create master records for LST thru VK11 for JIN2, I will chose the access where the combinations of customer & material tax classifications are available. If this access does not exist create it under an access sequence. But normally this is standard. The condition records will look like,
Cust-Tax classi.          Material tax claasi.        Rate           Tax code
        1                                    1                         2%               A1
        2                                    1                         4%               A1
        3                                    1                         0%               A1
Remember, rates are flown from the tax codes. Tax codes can be created thru T code FTXP. This is normally a FI job.
Hope this info helps
Regards
Manthan.

Tax classification screen for item level not appearing in sale order under Billing Doc tab

Hi Expert
while creating sale order Tax classification screen is not appearing for item level under Billing document tab.
Tax classification for customer and Material has already maintained. Tax classification screen is not appearing for USER but same time from our USER ID we can able to see that screen.
please help in above issue. is this related to Authorization issue or other thing need to check.
Regards
Pash@SD

Hi,
As per standard in Sales Order Document you will be able to see the Tax Classification fields in Billing Tab at Header level (for Customer Tax Classification) and at Item level for (Material tax Classification). The values from Customer M<aster is not populated at Header level as per standard but you can populate the value by using the Exit. Material tax classification populated from material master as you can see that at item level.
If for one User you are able to see and for other you are not able to see, kindly check first whether both are using same customer and material, and if yes, then check the User Exit.
Thanks and regards,
Amitesh Anand

Customer invoice - change of Tax classification required

Hi, I wonder if you can help with a query. For most customers we invoice outside the UK, we charge a VAT rate of 0%, which is linked to a tax classification in the customer master record (via XD03). In certain scenarios, we have to charge VAT for the same customer, for example if a training course is carried out for a foreign customer but the training takes place in the UK, we have to charge the UK standard rate of 17.5%. The way we have always achieve this, is that when we know we are going to invoice, we would change the tax classification in XD02, and then update the conditions tab on the sales order. This would in turn update the MWST percentage and allow us to charge the VAT, for this sales order only. The customer record would then be changed back to the previous code, once the invoice was issued.
For some reason this now no longer works. We have checked that the tax rates are set in VK13, and this all appears to look ok. The material codes in the sales orders have not been amended in any way so I do not think this is an issue.
This issue only seems to have occurred over the last few months.
Can anyone think of why?

Don't you feel the procedure you are following little to complicated for user when these can easily be determine through Condition record.
I would suggest, you can have 2 different sales area for the training sales in UK and outside (OT) sales.
Then, VAT tax classification
VAT - 0 - Not liable for Tax
VAT - 1 - Liable for Tax
And say, OT is your existing Sales area for the master data with tax classification VAT - 0 - Not liable for Tax. Then you to extend the customer master for UK sales
Sales org - Distri Channel
1000 - UK and there you maintain tax classification as VAT - 1 - Liable for Tax.
Here, we assume material tax classification is UK as VAT - 1 - Liable for Tax and OT is VAT - 0 - Not liable for Tax.
Now add an access to access sequence, say, Sales Org/ DC/ TaxClass1-Cust./ Tax class. material.
And maintain the condition record in VK11, say,
Not Liable for Tax - 1000 - UK - 1 - 1 = 17.5%
Liable for Tax - 1000 - OT - 0 - 0 = 0 %
And accordingly create you sales order with respective sales areas, w/o much manual intervention.
Hope this can assist you.
Thanks & Regards
JP

Wrong Tax Classification Taken from Material Master

Hi Experts,
I have a problem with Tax classification when determining the tax % at sales order entry. Below is the scenario:
1) There are two taxes applicable: Output Tax (15%) and Excise Duty (1%)
2) Customer 01 is liable for both Output Tax and Excise Duty
3) Material A is liable for Output Tax, but not liable for Excise Duty. In material master, the tax classification is maintained as "0" for Output Tax (the first line) and "1" for Excise Duty (the 2nd line)
4) Material B is the opposite, i.e. liable for Output Tax but not liable for Excise Duty. In material master, the tax classification is maintained as "1" for Output Tax (the first line) and "0" for Excise Duty (the 2nd line)
5) The tax codes are defined (with tax % maintained) in FTXP
6) Pricing condition records are also maintained.
Now the issue is during order creation with Customer 01 and material A, both Output Tax and Excise Duty are getting calculated as Zero. Where as in case of material B, both taxes are getting calculated with value (15% and 1% respectively).
It seems that the system is getting the tax classification from the first tax (output tax) in material master and apply it to the other tax (excise duty). Therefore the Excise Duty gets the wrong value if the tax classification is different from that of the Output Tax.
Have anyone come across this issue before? Your help is much appreciated.
Thanks.

HI ,
thanks for your reply. In the meantime I figured out the issue myself. It was due to the access sequence that only checks tax classification 1 instead of 2 , 3 etc.
Thanks for your reply.
Dominique

Uploading TAX Classification data in material master

Hi,
I have to upload tax classification data in material master for countries DE,IT,FR,ES,CH and GB.
I have used BAPI_MATERIAL_SAVEDATA and passing values to table TAXCLASSIFICATIONS.
But bapi is uploading tax classification only for country DE.
When I am creating through MM02 its getting updated.
Can anybody tell me what is the problem ?

Hi Ganga,
Yes I am passing different countries to table .
LOOP AT IT_STAX into WA_STAX.
       wa_taxclassifications-depcountry = wa_stax-aland.
        wa_taxclassifications-tax_type_1 = wa_tstl-tatyp.
        wa_taxclassifications-taxclass_1 = wa_stax-taxm1.
        wa_taxclassifications-tax_ind    = wa_stax-taxim.
        APPEND wa_taxclassifications TO it_taxclassifications.
ENDLOOP.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata           = wa_headdata
      TABLES
        taxclassifications = it_taxclassifications
        returnmessages     = it_return[].

Use of tax classification in material master

use of tax classification in material master

Hi
The indicator with which the system determines output tax for the material when processing sales and distribution-specific documents.
Generally it is done Country-wise. Like for one country No tax is applicable, for other country Full tax applicable.
Thanks
Prashanth

Material Tax Classification

Similar Messages

Maybe you are looking for