Material to Material Transfer with 309

Hi all,
I need to transfer the stock of one material to other , but the problem is both of them having different Base Unit of Measure.
I put alternate unit of measurement in Material Master and tried to do 309, but again system is not allowing to transfer.
Is there any other way to transfer it?
I can't go for reversal of all GRs and Production Orders.
Regards
Purnesh Sharma

Hi,
This is a rough work around,
01.
As you donot want to cancel all the Gr's and PO, take approval from management ( as it hits accounting entries) and scrap the first materials or issue the material to a dummy cost center.
Then upload the stock of second material with same quantity with 561, 501 or 552
02. If the second material is not having stock , and not having open items , if you feel no problem in changing the Base UOM, then you can think that option also.
Thanks & Regards,
Sridhar.G

Similar Messages

  • Material to Material transfer with movement type 321

    Dear Experts,
    Material to material transfer with movement type 309, the system create a price difference account if price control "S"
    but we transfer material to material with movement 321 (quality ), no price didderence account is generated, system showing different document
    Exp--- Material "A" with STD price 150
    Material "B" with STD price 100
    document is created
    Material A A/c. Credit 100
    Material B A/c. Dr. 150
    My question is, the price difference where is adjusting, is finance and costing books of account will effect.
    Kindly help to solve the issue
    Thanks & Regards,

    Dear Wasim,
    321 movement is to transfer the stock of a material lying in quality to unrestricted stock.
    It's not used for material to material transfer.
    Check and revert back.
    Regards
    Mangalraj.S

  • PURPOSE OF MATERIAL TO MATERIAL TRANSFER THROUGH 309

    Hello Experts,
    Can anyone please tell me the purpose of material to material transfer through 309.
    Thanks and Regards
    Nilu S.

    Hi,
    309 is used for  transfer posting.
    Lets say
    Example-1:
    You may change batch numberof a material to a different batch number ,which means that the quantity keeps staying the same.
    Example-2:
    You have material X & nedd to scarp, Then a Create scrap materials using Material type ABF or a copy of ABF.If the UOM of material X & Scrap are the same then do a material to material transfer using 309 movement.
    Regards,
    Biju K

  • Diff postings required at the time of material to material transfer mvt 309

    Short Text               
    Require different posting when material to material transfer               
    Long Text               
    Hi,
    User is requesting different account posting when transferring from
    material to material with movement 309(Transfer posting).
    Here is example:
    Finished product:X
    Semi finished product:Y
    When We are doing MB1B,309 from material X(finished) to Y(semi
    finished)Below account posting are coming
    ( Present system in SAP)
    Reference document number FI doc -2010- client 500(PRD) : ( 4900297532)
    22002000 Cl stock FG Cloth Dr .35100
    2200300 Cl Stock MIP Cr. 22296.60
    43010100 Exp Rev Fin Cloth Cr.12809.40
    But User wants account postings should be as shown below, Please
    suggestwhat has to be done to achieve below account postings when doing
    Material-Material transfer is done with Mvt 309.
    43010050 COGM WIP Cloth Dr. 22296.60
    22003000 Closing Stock MIP      Cr.22296.60
    22003000 Closing Stock Finished Goods Dr. 35100
    43010065 COGM F Cloth Cr. 22296.60
    43010100 Exp. Rev F Cloth Cr. 12803.40
    Regards
    Ravi Kumar

    Hi,
    Can you please give me details of logic in GBB OBYC.
    GBB mostly happens at the time of consumption of material or receipts w/o referring to any order etc.
    Can you please give me specific details.
    Regards
    Ravi Kumar

  • No New Batch number creation at the time of Material Transfer Movement(309)

    We are upgarding from 4.6C to ECC6.0. We have an issue in regards with the material movement type 309. At the time of creating the material tranfer using the same material as issuer and receiver, the same plant and storage location ( this process is used by the business to diferentiate batches).
    In 4.6C a new batch number is created automatically when 309 movement is posted; stock and characteristics transfered are allocated at the new batch created automatically.
    The same case in ECC6.0 does not create a new batch as done in 4.6C. We have looked for any SAP note or forum discussion without success.
    If anybody has an answer for this issue, let us know.

    As a matter of fact these configuration has been checked before, additionally we compare configuration at 4.6C and ECC6.0 and it is the same but the new batch creation (for this specific case) is working at 4.6C, not at ECC6.0.

  • Cross-client material transfer with conversion.

    Hi....
             I have a problem to solve....i am supposed to transfer material data from client 040 to 041 with conversions. I am thinking to do it by ALE. what conversions i am supposed to perform is not yet decided by project manager so as ALE is not very flexibe in certain areas...is it worthy to use ALE and what would be another way to carry out this task... please help me in this  problem...any article  or suggestion will be great help of mine....thanking you,,,,

    Hi!
    ? Strange. At least not easy. Do you speak about a development system? Maybe you just make a client copy and some hard database changes. Won't be OK, but if you just need some data for a performance test, this could do.
    Test for a migration? Try to stay as close to the final way as possible.
    You might save the outbound IDOC into a file, make some search and replace (in easy cases even in an editor) and upload the file for inbound IDOC. Also a report for file conversion can be used.
    User-exits for IDOC segment changes might be possible, but doesn't look like a good idea (one-time special rules, but coding for all the time and everywhere).
    Direct table copy is out of scope (e.g. because of internal number ranges).
    LSMW might be an option, too. As input file you could again use outbound IDOC saved as file (with conversions?). Then inbound conversion would be in a transparent and easy to maintain way.
    Hope you got some new ideas,
    regards,
    Christian

  • Material to material transfer with inspection results

    Hi,
    Could you please suggest me, how to tranfer inspection results from material to material?
    Thanks & Regards,
    Nataraj

    Hi,
    once list of inspection lots are generated, the data may contain  several results as opted, incldung Start date and end date for the inspection, Plant, Processing status of the inspection lot  and Material description. from the data generated, the transfer of inspection results may be taken up as the generation of lot results are not completed till usage decision code is entered. u may try with following link
    [http://help.sap.com/erp2005_ehp_04/helpdata/EN/2d/351bb1448c11d189420000e829fbbd/frameset.htm]
    [http://help.sap.com/erp2005_ehp_04/helpdata/EN/2d/351bb1448c11d189420000e829fbbd/frameset.htm]
    i think the link-1 will be more useful to solve ur que.
    with regards,
    mahesh.

  • Material to Material Transfer with difference UOM

    Hi,
    In MB1B Transaction use the mvt.type 309.
    as my understanding if we want to transfer material to material ,both materials base unit should be same.
    can i transfer if the material using difference UOM ?

    Hi
    Prerequisite for Material to Material stock trasfer is that 1) Base unit of measure should be same
    2) Stock must be available in unrestricted
    U can not post 309 for materials having diff. UOM
    Vishal...

  • Stock Transfer with 309 movement type Printout

    Hai Friends,
    I have done one transaction wiht 309movement type, while doing this transaction i have ticked GR/GI SLIP PRINT... & SELECTED COLLECTIVE SLIP.
    IN background, T.CODE : MN21... For Condition type WA03... Trans./Event Type - WH.... Message settings has been configured.

    hi,
    ALso check OMB5, OMB4 for your req...use the print indicator for the print controls...
    hope it helps..
    Regards
    Priyanka.P

  • Material to Material Transfer using Movement Type 309

    Hi,
    We have activated the material ledger.
    Issues:
    When we transfer material A to Material B using Movement Type 309 the price difference from Material A was not allocated to Material B after executing CKMLCP.
    But the another company who using the materail to material transfer, the price difference was allocated to receiving material.

    Hi,
    Please check SAP Note 167722 to able to do multi-level price determination for material transfer with using modification.
    best regards, Takashi

  • Mass material to material transfer

    Hi Expert
    i have high volume of material for which i need material to material transfer with movement 309, is this possible with any mass transaction.
    Regard
    Nabil

    Hi,
    Please note for movement 309 the base unit of measure that is stock keeping unit for sending and receiving material should be same
    and the both material should be managed in price control "V" Moving average price
    You can use LSMW , Refer few threads below
    LSMW for movement type 309
    http://www.sap-img.com/general/lsmw-steps-for-data-migration.htm
    Thanks
    Diwakar

  • Material to material transfer postings

    Dear friends,
    Is it neccesary that for material to material transfer postings (309) serial no. profile should also be same??? If it differs how can I go for 309??
    Pls reply.
    Amar

    Hi amar,
    you can do same serial number material in 309 but when error will come click proceed and remove serial no after saving doc add serial no in material master.
    this is the way only possible.it is correct way or not i dont know.
    actually system wont accept serial no is defferent.because trasfer posting material to material is we are replacing material form old to new material if you have different serial nos how will possible replacement.this is the reason not accepting system
    Prem

  • Material to material stock transfer with batch management and scrap

    Hello
    Here i have an requirement that
    Raw Material  A maintained in Batches. Raw Material B is also maintained in batches. A and B  are used in two different finished products.A and B are with the same material properties except the size. that is  Size of  B is half of A.
    Now some times if B material is not readily available in the stores then A is cut into two halves and then material to material Transfer posting need to be carried out.
    Now while cutting A into two pieces there may be chances of scrap .so how to address the scrap in SAP.
    How to map this Scenario in SAP

    Dear,
    Would like to suggest the following: Basing on your client requirements and existing business scenarios following, not sure how far will be suits this.
    Since both materials are same except the size,
    In case of shortage of material B, material A used by cutting its size in to half.
    In this case, issue material A to production cost center as it is (i.e in its original size). Using movement type 201.
    Once transferred to production, can carry out the cutting in half and here consider the scrap and post the scrap using 551 Q movement.
    I think no need for transfer material to material in this case.
    Regards,
    Syed Hussain.

  • Material Transfer from Storage Location 2 Storage loc

    Hi Gurus,
    Here Client want to transfer Material from 1 loc to another. Std T Code is MB1B with Mov Type 309. But here we have to enter material, qty,& batch no.But client's requirement is that he dont want  to enter all these things.He want to select the material,batches collectively sothat seperate entry should be minimised. Is there any functionality through which we can transfer the selected materials?
    Please reply soon its urgent.
    Regards,
    Mayur

    Hi mayur
    First of all 309 movement is ussed for Material to material transfer
    like our friend said for storage loc to storage loc. you need to use 311
    Now when you go to MB1B then goto Edit in that you can see default value
    enter your default value , so after that you need to choose only material and batch
    collectively
    Thanks
    Bala

  • Stock transfer with serial number assignement. 309

    We need to make a transfer from Material to Material using the class movement 309 in IM, the problem is that one material is with serial number assignment and the other is not, both materials work with lot. When we try to make the transfer we get the error M7 174, the message is an error, and we change it to a warning, however, we still get the same error.
    In the process we really need to make this transfer because we sold this material in fractions and the serial number function don't let us move a material with decimals.
    Any one has seen the problem?
    Thanks

    Alex thanks for your answer, I tell you that as a first option we created two new classes of movement similar to the class of movement 561/562, but imputing to a different accounts, but we have activate the material ledger, the local currency is transferred without any problem , but the other currencies of the material ledger is transferred with the current exchange rate. We need transfer exactly all de currencies
    Our solution is make the 309 movement without the validation.
    Thanks
    Edited by: Luis Martinez on Feb 15, 2011 3:50 PM

Maybe you are looking for