Material transfers between plants and storage locations report
Hello experts.
I´m looking for some help.
Actually i am looking for a report that show information about material transfers between plants and storage locations. Is there any report that shows the source of the material (plant, storage location) and also shows the target (plant, storage location).
Thanks for your help.
Hi,
Though you may not get report for the same , but you can narrow down the check by using the table MSEG or MB51 using the moment types like 311 643 (sd delivery moments )which are for stock transfers .
or if you want storage location stock many reports are available like MMBE, or MB53 etc.
Regards
Similar Messages
-
Creating material in multiple plants and storage locations
Hi Gurus,
I am wondering if someone could help me out in this issue,
I frequently get 1's and 2 materials creation requirement , is there any simple way , while creating material in MM01 , I could create/extend to all plants and storage locations.
I know we can use LSMW , but this is not bulk requirement,it is frequent but in 1or 2 nos.
Any help highly appriciated and rewared.
Thanks.Hi,
To my knowledge I doubt if both MM17 & MM50 can meet your need, as MM17 is to mass change the values already existing in the MMR, while MM50 is to extend the views in a given plant & not to extend across plants.
A suggestion would be to use the BAPI's -
BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
Give your requirement to your abaper & inform him / her to use the above BAPI's. I am sure your abaper can write a simple & user friendly program to meet your exact need.
Regards,
Vivek -
Combination of Material,Serial Number, Plant and Storage location
Serial Number needs to be fetched corresponding to material, plant and storage location. which tables to hit.
KartavyaHi,
Please check table EQSE (OBJK -> EQSE).
Regards,
Ferry Lianto -
STO between plant and storage location MRP area
Dear PP/DS experts,
For some business requirements, I want to model stock trnasfer order scenario from plant to storage lacation MRP area but the system only make stock trasnfer reservation.
In my EPR system, I maintainted storage location MRP area material with special procurement 45, then the transportaion lane is created between location 1200(location type 1001) to MRP area 1300(location type 1007).
My question :
1) Is it possible to make stock transfer order scenario instead of stock transfer reservation between plant and MRP area ?
2) If possible, Is there something to do more in master data maintenance except mentioned above in ERP ?
Thanks in advance for your help.
Regards,
Lee, Seung WonHi,
Yes you can perform intracompany STO (Plant to plant) and STO at Storage location level at the same time,
We are using same for our client.
http://www.architectsap.com/blog/sap/how-to-setup-stock-transport-order-between-two-storage-locations/
Regards,
Gopala.S -
Material deletion at plant and storage location deletion at plant
hI EXPERT,
We are going to extend the materials in plant A to plant B and C. So we will extend it using LSMW. After extending, we need to delete the materials in plant A and storage location in plant A. How can we do that? Please explain step by step.
ThanksHi,
If you want to delete material at storage location level
Enter MM17
Select table MARD
Select fields tab
find MARD-LVORM
Execute (F8)
Enter list of materials
Enter plant
enter storage location.
tick the field lvorm(carry out mass change) -
During MRP run unwanted plant and storage location include and exclude
Hi There,
During MRP run how to include and exclude the unwanted plant and storage location pls let me know the required configuration settings.
Thanks in advance.HI,
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run :-
OMIR - Define storage location MRP per plant
Put the MRP ind. as. 1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as. space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not. You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards
KK -
Default Plant and storage location for components in MFBF
Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
MurugesanHi MURUGESAN !
Can you give me some information more in Special Procument Configure in plant 2000 like:
- Procurement type (maybe F)
- Special procurement (Maybe U)
- Plant (Maybe 1000).
- Issuing plant (maybe 2000)
We will check together.
Regards,
Tony -
Search shopping cart by plant and storage location?
Hi,
is there any standard report or anyway to search the shopping cart based on the plant and storage location..
please let me know..
thanksHi ,
Not directly as Yann says.
But indirectly
from SRM org structure -> ex attribute -> location
go to yr desired plant
get all the employees assigned to this plant
In admin log in -> monitor shopping carts
use these employees as requestors
and search
let us know if it suits your need
BR
Dinesh -
Plant and Storage Location determination at Item level during Copy control
Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup BansalHello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh -
Unable to set plant and storage location in Batch as required/mandatory
Hi Experts,
I am having a problem regarding field controls.
I would like to make plant and storage location as mandatory/required in MSC1N,MSC2N,MSC3N and MSC4N.
I have follow the path below
SPRO-logistics-general-batch management-bath master-field selection batch master-assign field to field groups
What i can see is field groups are being assigned to field name.
My question is, where do we go to to set the field group?
Thanks in advance!Hi Dex,
You have gone to the right location.
On 'change view field control for batch master record' against each transaction like MSC1, MSC2,MSC3 and MSC4 there are number of dots '............'.
Double click on each dot against the transaction you want to modify. Each dot corresponds to different fields. Over here you can specify wheter you want to make the field required, optional etc.
Hope this helps.
Tarang -
How to find out the plants and storage location for a given company code
hi
How to find out the plants and storage location for a given company codeHi
Check for Assignem,ent of Plant & compnay code in OX18
& for Combination of Plant & Storage location in OX09
The total org structure can be viewed in EC01 - Click on Structure -> navigation
& Continue, Click on the Compnay code & the wole structure can be viewed
Thanks & Regards
Kishore -
Material is blocked in Plant and storage location due to Physical Inventory
Dear Experts,
Our user trying "Post goods issue against 201 movement type,but its giving error message
"Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage
location 2101 due to a physical inventory".
we are not using any physical inventory here,give me sugestion.
i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.
Thanks in Advance
varun>
madhu varun tirupati wrote:
> Dear Experts,
> Our user trying "Post goods issue against 201 movement type,but its giving error message
> "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage
> location 2101 due to a physical inventory".
> we are not using any physical inventory here,give me sugestion.
>
> i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.
>
>
> Thanks in Advance
>
> varun
>
madhu varun tirupati wrote:
> Dear Experts,
> Our user trying "Post goods issue against 201 movement type,but its giving error message
> "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage
> location 2101 due to a physical inventory".
> we are not using any physical inventory here,give me sugestion.
>
> i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.
>
>
> Thanks in Advance
>
> varun
Dear Experts,
We have a simulation in our quality server,even though a physical inventory document is existed for the material,doc status showing active in MI22,but its allowing me to issue goods,but its not allowing in our production system.
please give -
Shipping in shipping point from plant and storage location is not possible
Dear Experts,
i am trying to configure STO with delivery scenario in my company
after creating PO (sto UB) and delivery through vl10b when i try to do picking in vl02n and when i enter storage location its giving error
"shipping in shipping pointxx from plant xxxxand storage location xxxx is not possible"
i ve checked all settings
1.plant and sh point assignment
2. ovl2 sh point determination
3.ovl3 picking location determination
4 all master data cust n mat for loading group and shipping cond
not able to find any solutions plz help
Regards
SupriyaCheck your entries in following options in SPRO path:
IMG - MM - Purchasing - Purchase Order - Set Up Stock Transport Order - Setup Stock Transfer b/w Storage Location - Setup Storage-Location-Specific Shipping Point Determination
Option 1: Define Rule for Determination of Shipping Point
Option 2: Assign Shipping Points According to Storage Location (this should be there, if in Option 1 Determin. Rule; Shipping Point is L: Storage-Location-Specific Shipping Point )
Regards
JP -
Plants and storage locations..!!
dear all,
i have created one plant 2001 with storage location 1002 1001 respectivley. now i want to add more plants and storage locatons to that same company code..how to do.? can anyone tell me the step by step process.
regards
shaik.Dear,
You can create more plants by the same way I have created plant 2001.
- Tcode SPRO (IMG Customizing)
> Enterprise Structure
>> Definition
>>> Plant Maintenance
>>>> Maintain maintenance planning plant
And the storage locations:
- Tcode SPRO (IMG Customizing)
> Enterprise Structure
>> Definition
>>> Materials Management
>>>> Maintain storage location
Best regards,
Eduardo Junior -
FM to check material plant and storage location combination
I need to build a check that material is extended for plant & storage location.Please guide id some standard function module exists.
I do not want to write select query using MARD.Hi ,
try this FM
MARD_SINGLE_READ
Regards,
Rohan.
Maybe you are looking for
-
All the time spent into trying to make my ipod work i did it all what else
ok i just got my ipod three weeks ago right and then while i was updateing it i with 6-28-06 software then it said do not disconnect until ipod is done or something like that so i waited till it was done and it looked done to me and i disconneted it
-
Appreciation in the depreciation of an asset after acquisition
Hi all, After acquisition in last quarter of the asset, the asset tries to do a catch up and it posts an appreciation suddenly in the same or next month of acquistion. For e.g the Useful life of asset is 1 year. Acquistion date - 01/08 with amount 15
-
Is it ok/safe to run my MacBook Pro without a battery? - it bulged and am in heated debate with store as to who is going to pay for new battery. It's plugged in running of mains just fine, but am unsure whether this is ok for my laptop. Thank you.
-
When i try to install itunes 10.5 it gives me the following error There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor. Please let m
-
Hi All, I am using the ECC 6.0 functionality for external catalogs in purchase orders. The path is SPRO > MM > Purchasing > Environment > Web Services Is there any way to default the vendor number into the PO screen after coming back from the catalog