Material type creation
Dear sir,
ROH material type copy in my company material type, without copy ROH material type using possible
HI
Yes, without copy ROH material type you can create your own material type, but you have to do lot of assignment for the new material type, normally in STD.sap whenever you are creating any configuration settings,sap recommends to copy from the std. one.
After that based on your business requirement you can change the std.settings.
Thanks
Similar Messages
-
Material Type creation in SAP Netweiver MDM 7
Hi All,
i want to know how the Material Types, material Groups and number ranges forMaterial Types created. are these created in Datamanager?
Can anyone please provide any documents of the same.
Thanks in Advance
Ramya
Edited by: ramyadixit on Dec 2, 2010 12:11 PMHello Ramya
i want to know how the Material Types, material Groups and number ranges forMaterial Types created. are these created in Datamanager?
Material types and Material Groups are defined as flat Lookup tables in MDM. You can either maintain them manually by exporting the table values from SAP and importing them in MDM using Import manager OR use transaction MDMGX for automatically populating these values from SAP to MDM.
On how to configure MDMGX and its use please refer to following links-
How to Use MDMGX
https://websmp203.sap-ag.de/~sapidb/012006153200000394732006E/MDM554_GenericExtactor.pdf
Number Ranges- If the numbering schema is simple and can be replicated in MDM using calculated fields we can define calculation fields for Material numbers. Or we can also assign a number range while defining the remote systems in MDM based on Material type.
Hope this helps-Ravi -
Problems with reference field in material type
Hi,
I have problem with field reference in material type creation.
When I define a self-defined field reference ZERS (copy of standard field reference HERS) for a own defined material type ZERS (copy of material type HERS), I get the following error message:
Field reference ZERS has not been set up
Message no. CZ127
Diagnosis
You have specified a field reference that has not been set up.
Procedure
Set up the new field reference or use an already existing field reference.
I do not understand why because the entry ZERS is present in table T130A.
Here is the IMG config I have made:
1. Logistics general->Material Master->Field selection->Maintain field selection for Data Screens (here I made copy of field reference HERS and named it ZERS)
2. Logistics general->Material Master->Basic Settings->Material types->Define attributes of Material types (here I made a copy of material type HERS and named it ZERS. I then tried to set the field T134-FLREF "Field reference" to ZERS, but then the error message appears)
Does anyone know what config I am missing?
Or any reason why the error message CZ127 is coming up?
ThanksMust have been system error, I deleted all entries and did it all over again, it worked.
-
Restricting the material types in MM01
Dear experts,
Our client is using few materila types like-HIBE,NLAG,ROH
We have upgraded from 4.6B to ECC6. Now many other material types have come .
While creating material in MM01,selecting the required material type among the many is inconvient.
1)One way of removing the unnecessary mat types is deleting others in OMS2,
The other way of restricting is --
2) I can enter the authorisation group in OMS2 for the required material types and i can assign to M_MATE_MAR object in the required role, but it is not working
Do i need to create authorisation group in any customisation for entering in the OMS2, because what i entered in OMS2 is not displaying in PFCG of the authorisation object under authorisation group.I have checked in SM30 also ,the same authorisation groups under T134 table are updated. Even though,mat types are not restricted in MM01 under material type field.
Please suggest any other way of restricting the display of material types in Material type field of MM01 instead of deleting unwanted the material types in OMS2 transaction
Regards,
DayanandYou can use the material type specific transactionsminstead of MM01, remove the authorizations of MM01 transaction and add the required material type creation transactions
example - Goor Matreials create(special)
HIBE,NLAG,ROH
MMB1 Create Semifinished Product(HALB)
MMF1 Create Finished Product(FERT)
MMG1 Create Returnable Packaging
MMH1 Create Trading Goods
MMI1 Create Operating Supplies(HIBE)
MMK1 Create Configurable Material(KMAT)
MML1 Create Empties
MMN1 Create Non-Stock Material
MMP1 Create Maintenance Assembly
MMR1 Create Raw Material(ROH)
MMS1 Create Service
MMU1 Create Non-Valuated Material
MMV1 Create Packaging
MMVH Create Centrally: Decentral.Shipping
MMW1 Create Competitor Product -
Creation of Material Master for a material with Material Type NLAG
Hello Sirs,
I have to create a material which will be consumed directly. I would use the
material type NLAG (Non stock material). If I create a material with this material type, will it contain an Accounting view where in I can maintain the price of the
material? If it contains an Accounting view, which type of Price control should be
used (Moving average or Standard)? Further, can we maintain an info record for
a material with material type NLAG?How the price updation happens?
Regards
YogaHi Madhu,
Thanks for your reply. But, I have one more doubt. For non stock materials, we
will specify the cost centre and G/L account at the time of creation of Purchase order. Then, do we have to specify the valuation class at the time of creation of
Material Master since there is no automatic account determination?
Regards
Yoga -
Reg: Creation of new Material type
Hai Guys,
Jino here,can anyone please tell me the procedure for creating my own "MATERIAL TYPE"
while creating a new material.
Regards
Jino.Hi
decide which material type in the standard availabilty closely resembles you New material Type you are planning to create, It may be ROH/HALB/FERT/ERSA or any other. Use the TxN OMS2 for this, select the existing Std Material and do a Copy As and name the New material Type starting with Z . for example ZRAW , once saved select the material tyep and go to the details of the new material type , you can remove Certail views if you donot wish to have it during material creation, check out other parameters also lie external proc/internal proc, standard or Moving avg price indicator and proceed as required for you.
Regards -
Restrict Info Record Creation Based on Material Type
Dear colleagues
I would like restrict material info record (ME11) creation based on given materialsu2019 material type (MARA u2013 MTART). Is it possible such control? If yes, can you please provide the way?
Best regardsDear AP,
Unfortunately I wasnu2019t able to find any user exit, badi or etc. That's way I need to post the question to the forum. Before providing any answer please consider that no question is post without any research and give the audience specific, to the point answers not such irrelevant ones.
Thank you -
Can we change material type after creation of material
hi all ,
can any body tell me how we can change the material type of already created material , i have a material type (do not use raw material) which i want to chage in raw material
please replyHi Manjit
Try transaction MMAM
It may not work if you have some differences in field selection between the old material type and the new material type (e.g. batch mandatory in old material type and hidden in new material type)
It may not allow processing if stock has already been posted
Regards
Steve -
Creation of material in material type "hers"
Can anybody please tell me in detail how to create a material in material type "hers"
Hi Keerthi,
you can take eg: of Manufacturer Part Profile for this scenario.
Create External No ranges for Vendor Account Group MNFR and save.
Now Create Each Make like ABB as one Vendor in XK01 Trxn code.
Create Material Code original in mm01 with ROH material type. (for eg Transistor which is available with ABB & Seimens make)
Create material code with Material type HERS which contain only two views (Basic Data & Purchasing) and give Make, Original material No & Material group and other details and save.
Create a Purchase order with original Material, then it will ask for mnfg part profile then select the material and click F4 on it it will show you the created mfg part nos like ABb 7 seimes and select one and save.
Before this you have to Activate MFg part profile in OMPN trxn code.
And in Material master Purchasing View Select the mfg part profile and save.
Reg,
Ashok -
Hi
Can we create a material type for raw material where the Sales view will be activated.
Regards
Soumenhi
use OMS2
here copy the material type for raw ROH
then here only u can add sales views
for ur existing material type also u can extend views of sales
regards
kunal
Edited by: kunal ingale on Sep 5, 2008 12:05 PM -
Creation of new Material Type - Asset
Dear Friends,
Here as per my client requirement, i have to define new material type for Asset Material.
For this definition i need following info -
1) Views to be selected.
2) Which Price control indicator is to be set for the ASEET
Material Type? (V or S)
Thanks in AdvanceHi
Material type for asset - Copy ROH.
Maintain the views Basic data, Purcahsing, Accounting, Storage views (only if you have profit center accounting )
Price Control give it as a Moving average. -
What is the material type for Online/IT material creation?
Hi
Can any one tell me what is the standard material type and Item category groups used for creating an online/IT/software product material which is sold online [eg. online information sold over portals, portal subscriptions etc]?
What are the uncharacteristic of such a material in standard system?
Regards
Sanjayhi
these lins might be help ful to you:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9e60be90-0201-0010-49b0-f57cfeeb5530
http://help.sap.com/saphelp_crm40/helpdata/en/f8/9d7c3e8a5cd064e10000000a114084/frameset.htm
hope this clears your issue beacuse these lins provide you plenty of information.
regards
balajia -
Material Type during Material Creation
Hi all:
For creating Raw Material or Finished Product from MMR1 and MMF1, there is no need to select material type, . I have created Material Type for e.g Gold, Silver, Color Stone, even i have to create Gold, Silver and Color Stone material without selecting material type.
Could anyone help me with this.
Regards.
Shegar.Hi,
I guess defaulting is not possible. Copy the existing material and create a new one so that the inspection type is also copied.
Check the link
http://forums.sdn.sap.com/thread.jspa?messageID=9803039#9803039
Regards
Ayyallas
Edited by: ayyallas on Feb 22, 2012 12:51 PM -
Mandatory fields With reference to Material types
Dear Gurus,
I need to make few fields as mandatory with reference to material types while creation of the material master data.
For example:
For Semi finished and Finished Schedule margin key is required(mandatory)
For Raw Materials Schedule margin key is optional.
Regards,
SiddharthHi
find following step to make field mandatory for material type
Follow the stpes for making field as optional, required entry
1 click the tab ,(Which is u want to be Required entry )and get the field name by pressing F1 key and then
2.Go to T.Code: OMSR and enter that field name and get Selection Group
once you get selection group and field name
3 Use t.Code: OMS2 and click your material type and in next screen check Field reference ( you have assigned for material type; example :;For ROH material type the Field reference is ROH
3. Use T.code:OMS9,, Double Click your Field Reference and select field selection Group , & select round box of Required Entry or optional and save
check following link you will get clear idea [How to configure the fields required for each Material type ?;
Regards
Kailas ugale -
Urgent:Material Type for Packaging Material in WM and MM
Hi
There is a place in SPRO where i can define the material type for packaging.
Logistics - General -> Handling Unit Management -> Basics -> Define Packaging Material Types
How can i create a material using this material type? What is the use of material type here?
Whenever i create material in MM01/MM41, i get the standard material type list.
Thanks & REgards
KapilHi,
In T.code: OMS2, you can get standard material type list.VERP is the standard material type for packing material.You can copy VERP and rename to ur material type( as it is ur business requriement or else u can use same VERP)
What is the use of material type here?
With the help of ur Material Type , u can craete material like The material type,will be used while defining the material
master.At that time,in Tcode:MM01,first screen we need to
mention,(material type)it show the nature of material
ex:-engineering product,finished products,semifinished
product,etc.,
It also play vital role on material numbering,material type in comination with plant & valuation class, play vital role in inventory & accoputning.
To Create Material,use t. Code: MM01,
Step-1
Enter Material Code: ( example-Polythene Bag, If External Number Range or leave it blnak)
Enter Industry Sector: ...................
Enter Material Type: ..........................(VERP- Packing)
Step-2
Select
Views you required( like eample:basic data-1, like basic data-2,purachsing, purchase order text,General plant data, accounting-1, accounting-2 etc)
Step-3
Enter Plant,
Enter Storage location
{{{Enter Sales organization & Distribution channel(if sales view selected)}}}
Step-4
You will have views like (example-1, basic data, enter Base unit of measure, material group and other details as required field,example-2,Accounting data, enter valuation class, price control; S or V & price)
Step-5
Save.
Note: Before creation material you must know which Industry Sector, Material Type ur going to use and material numbering is internal or external.
For more, check the following link for creation of material
http://www.synactive.com/docu_e/doc_multi_mm01.html
Regards,
Biju K
Maybe you are looking for
-
Issue with Agent Profile from AM 70 OpenSSO interesting issue
Hi All, I have a specific scenario and if it is not possible then ugrade from AM 7.0 to OpenSSO cant be true. I have issue with the agent profiles (BTW I am not doing upgrade from AM 7.0 to OpenSSO but its a fresh OpenSSO install) In AM 7.0 Agent pro
-
How to contain a stock vector into an existing shape?
Hello! I made a shape with a fill and I downloaded a stock vector that I would like to be contained within this shape. Basically where you see the flower of life I would like it to be inside the pink area, and nothing else of the flower of life showi
-
How do i get itunes to recognize songs on my computer that came from a purchased CD?
How do i get iTunes to recognize songs on my computer that came from purchased Cd's?
-
Passing IR Values to Form via Link Column
I am fairly new to APEX and was wondering if there was a way to pass more than the 3 allotted values in the Link Column of an Interactive Report. My report is generated from a query that pulls from several tables. My link column navigates to a form t
-
Hello guys, our customer requests functionality synchronizing passwords over all the systems within their SAP solution (i.e. CRM, BiW, R/3). Please do not try to explain me it is not recomended by SAP (there is a lot of reasons why not doing so), I k