Material type FHMI(product resource/tools)

hello gurus,
can u tell me why materials under material group FHMI production resource / tools are only managed on quantity basis

Dear Raghu,
Production Resources/Tools (FHMI) are unlike machines and fixed assets, production resources and tools (PRTs) are movable (not stationary) operating resources that are required to perform an activity and can be used repeatedly.
For example, PRTs include documents, engineering drawings, jigs and fixtures, and
measurement instruments.
Please follow the link to know more :
http://help.sap.com/printdocu/core/print46c/en/data/pdf/psprt/psprt.pdf
Regards,
Syed Hussain.

Similar Messages

Convert Material Type FHMI to ROH

Hi, Friends
I have create one PRT material, also I create the view of Production Resources/Tools. Afterward , I use T_code 'MMAM' to change Material Type 'FHMI' to 'HALB', But system prompt 'Material is a production resource/tool; not defined by new material type.' .
Is there any IMGs I need to setting? Please Help me ,How Solve it?
Thanks a lot.
Dana

Hello,
Stocks already exist in Perticular plants. However, these
plants
have different quantity/value updating, resulting in different
account determination.
Stocks already exist at plant level.
One more: FHMI Material type is having the View- production resource/tool,
These material types material are account assigned, without account assigned you should not create PO for these materials.
And ROH is does not have -" production resource/tool," this view...
It is not possible to allow you change the materail type. Check in OMS2.
IF you realy want to change then For temparary you should select the View for ROH in OMS2 and make as it is..(this is not recommended)
Regards
Mahesh Naik

Material Type FHMI

Dear All,
Please tell me something about material type PRT (FHMI).
Whether it is consumeable or not when configured in BOM.
Pls have a comment.
Regards
Gitesh

Production resources/tools (FHMI)
Production resources/tools are procured externally and used in production or plant maintenance. A material master record of this material type can contain purchasing data, but not sales data. It is managed on a quantity basis.
· Jigs and fixtures
· Measuring and test equipment
Regards,
Indranil

MATERIAL TYPE : Production resource/Tool...

Hi...
MATERIAL TYPE : PRODUCTION RESOURCE/TOOL.
Friends..i want to know about the above material .and its uses..generally i heared that this type of materials mostly used in manufacturing industries...if i want to configure this in which way i can configure..and let me know brief about material (production resource/tool..)
(or)
plz share with me your experience about this type of material and its configurations..
It will be verry helpfull to me..
Regards,
Sirish

Hello,
Please go through this documentation:
http://help.sap.com/printdocu/core/print46c/en/data/pdf/PSPRT/PSPRT.pdf
Prase

Production resources/tools

Dear gurus,
Could you please help me with the following issue.
There is a neccessity to use production resources/tools, because we have materials, that
Firstly, are produced,
Secondly, are used in production, but should not add value to it,
Thirdly, have some durability, which is diminished during the usage of PRT,
Forthly, are being repaired, and the durability is being restored.
Plant maintenance is not implemented.
I know from help, that it is possible to create PRT as a material, machine or a document and maintain in the rooting.
Tell please, is it possible to create a material type FHMI (PRT) in order to:
1. Produce it (not procure).
2. Maintain "ST" a basic UoM for it, but also to maintain some durability for it somewhere.
3. Maintain it in the rooting.
4. During the production order confirmation, diminish the durability without diminishing the quantity.
5. To issue this material to CO-order for repairs (without plant maintenance), when the durability reaches 0, and somehow to restore the durability for it.

Hi Nikolaj,
It's very common requirement in many implimentations. But unfortunatley SAP does't support that process in PP module. Only from PM module we can support that process.
But there are many ways to map process by using small development.
Eg.1 Delcared PRT as material master and assign it in BOM. And update a Z field in BOM depending on the number of production order qty. when it reaches zero we can trigger message!!.
Any way you need CO order only for settlement. So you can always book cost for restoring the PRT to relevant cost object.
Eg.2.
Create other or doc PRT and assign it to a routing for a specific operation. And then trace that operation in the production order by a development and manage the life of PRT.
Reg
Samson

Status: Production resource/ tool

Hi,
I don't understand the function status for production resource/ tool.
1. MM01. in the view Production resource/ tool and in the field Plant-Specific Material Status there are 2 choices. 01 blocked for procment/whse and 02 blocked for task list/ BOM.
I would like to blocked the material for the routing. when I choice 02 It isn't been blocked for the routing. when I choice 01 It is blocked. I don't understand it because it is the opposite.
2.The same in the PRT Master there are 3 status 01created on 02 release for PRT usage planning, 03 release for production. When I choice 02 I It is blocked for the Routing although 02 has to be release for the routing. with 03 function correctly
Can you explain me how the status function in the 2 cases. Do I do it wrong?

hi
May be it has been customized in different way .kindly check in OMS4
regards
thyagarajan

PRT Production Resource Tools Counter

Hi,
I am trying to setup a production resource tool which is counted at time of production.
I have setup the Material, Equipment, BOM, Counter, Routing.
When executing a production order the Counter is not updated with the ammount produced.
Does anyone have a manual on how to setup PRT Counters. I have looked on the SAP Library but this is not sufficient to solve the problem.
Regards
GIlbert

Dear Gilbert
You have to create the equipment as PRT Equipment category. In PRT data you have to assign the (counter) measuring point and maintain the usage formula. Assign the Equipment PRT in the production orders and Enter the usage value and UOM. Ensure the UOM of the usage value and the UOM of the characterestic value you have assigned in the measuring point are same.
Now the confirmation will update the measuring point by creating a measuring document for the measuring poit to the count of the confirmation you are entering.
Regards
Soundararajan M.

Difference bet ween Fleet Object and Production Resource Tools

Hi all,
Please give me the difference between Fleet Object and Production Resource Tools in Plant Maintenance
Thanks in Advance
Thanks,
shriraam

Dear,
Production Resources/Tools (PRT)
Unlike machines and fixed assets, production resources and tools (PRTs) are movable (not stationary) operating resources that are required to perform an activity and can be used repeatedly. For example, PRTs include documents, engineering drawings, jigs and fixtures, and measurement instruments.
Fleet Management
Here can map the vehicles as equipment master records and enter vehicle-specific additional data, which is displayed in the system on two additional tab pages. This means that you can now specify important fleet data such as the license plate number, load volume, consumption data, fuel card number, engine data, or fuel type and so on directly in the equipment master record.
You can also perform maintenance planning for a fleet object. You can make the date of the next scheduled service dependent on the distance
Please refer this link,
[Link|http://www.nd-solutions.com/pdfs/white_EAM/EAM_ConfiguringFleetMgt.pdf]
Regards,
R.Brahmankar

PM: Print / View Production Resource Tools - documents from Iw32

Hi SAP Gurus,
My requirement is to create a customized program to print the documets save in Production Resource Tools-IW32/IW33.
Please suugest!
Thanks and Regards,
Pavan.

Hi,
I know this post is old, but to answer the question:
Yes, you can link, using Object Linking functionality in DMS, to a PRT.
The object is a bit obscure in the object list, but, when selecting a object in the DMS Config>Define Document Type>Define Object Link, look for the object called CRVS_B.
This is the PRT Object Link's definition, which will then allow Object Linking functionality as required.
The other way, as mentioned earlier, is to simply use the PRT functionality from your transaction, i.e. IA06 to link to a DIR. This has the downside though that the bi-directional navigation from DMS<>PM for example will not exist.
Regards,
Freddie.

From Which table Production resource/tool number can be retried

Hi Friends,
In SAP Query I am Using MAPL,PLAS, PLPO, PLKO, I want to retrieve Production resource/tool number PLFHD-FHMNR, can any one tell in which table it is storing the value.. & what link condition I need to use to retrieve thisfield.. Transaction CA03.
Thanks,
Ravi.

FHMNR is stored in table ADFSH_PRTHEAD. You may need to pass ORGEH - Org. Unit to get the Production resource/tool number.
This may help you.
Regards
Karthik D
P.S. May i know why you have mentioned FHMNR in all your answered questions today?

IA07 : Key for Task List Group and Production resource tool number link

HI abapers,
In IA07 TCODE , i want to retrieve Key for Task List Group( PLNNR ) and Production resource tool number ( FHMNR) .
In technical settings for both the feilds, structure names are mentioned.
Is there any function module or table link to retrieve both .
thansk & regards
Raghul

Hi Raghul,
i am also facing the same issue. Kindly let me know if u get any solution for this.
Thanks in advance.
-AruN.

Combination of plant SUNP and material type finished product does not exist

HI i am suneel
my issue is combination of plant SUNP and material type finished product does not exist when i posting to material in t.code
MB!C after entering materiel and qty in the selection screen i pressed enter on that time this massage is happening
Thanks
with regards
suneel

Hi lakshmi pathi ,
Sorry for the inconvenience i am new for this sap sd and also this community . Actually yesterday and today i got lot of solutions from this community .really i feel very happy with this and i continuous searching for my issues and i got so many solutions. these are also i searched but i dint got any solutions so i posted here .
sorry for the inconvenience
any way thanking you for giving valuable suggestion.
with regards
suneel

How to Set up PRT (Production Resource Tool)

Hi ,
Anyone knows How to Set up PRT (Production Resource Tool) for equipment , is it all master data set up or there any configuration required to activate PRT .
Thanks
Pawan

just in case have a quick look here:
http://help.sap.com/saphelp_47x200/helpdata/en/89/a42719461e11d182b50000e829fbfe/frameset.htm
Logistics - Production Process - Master Data - Production Resources/Tools - Production Resources/Tools - Equipment - Create.
spro->production planning for process industries->master data->production resources/tools (PRT)
you will see 5 transactions to configure your settings:
-define PRT auth.grps
-define PRT status
-define Task List Usages
-define PRT Group Keys
-Define Overview Variant for Where-Used List/Mass Replacement

Datasource for capture of PRT (production resource tool) details in PM

Hi,
I searched for a datasource which gives the production resource tools (PRT's) assigned to an activity in a maintainance order (Plant maintainance). I was not able to find any!. Should we go for a generic extracor to have the PRT details in a maintainance order?
If yes what are the tables that we can get this details.
Thanks in advance.
Rajeeve Patric

Hi Gurus,
still waiting for your update on this..

Documents to be linked from DMS to Production Resource Tools

hi, All
I want to Link some documents to PRT through DMS.
From DMS i choosed object link Production resourec/tools.
I searhed PR/T no result found.
So Now i want to Know that How i could Creat PRT and Link some document to PRT.
Any one help me
Rgds,
Ben

Hi,
I know this post is old, but to answer the question:
Yes, you can link, using Object Linking functionality in DMS, to a PRT.
The object is a bit obscure in the object list, but, when selecting a object in the DMS Config>Define Document Type>Define Object Link, look for the object called CRVS_B.
This is the PRT Object Link's definition, which will then allow Object Linking functionality as required.
The other way, as mentioned earlier, is to simply use the PRT functionality from your transaction, i.e. IA06 to link to a DIR. This has the downside though that the bi-directional navigation from DMS<>PM for example will not exist.
Regards,
Freddie.

Material type FHMI(product resource/tools)

Similar Messages

Maybe you are looking for