Material Type LEIH - LEER

Dear All,
I have a empty drum scenario, which goes with finish material, finish material is stock able and valuated, but empty material is only stock able having no value.
System explode the BOM at sales order level. With main and sub material, sub material is a empty material.
But when I create sales order system give error message and "VPRS is missing, as the pricing procedure this condition type for the finish material.
Item category for LEIH material type system determine TANN, but I don't know why system is asking for VPRS.
Please provide the possible solution.
Regards,
Imran khan

Why you used LEIH here--- when this was just used for packing(suppose to use VERP)
Also you are trying to show this as BOM item..(may be used ERLA/LUMF as Item category group)
Normally for item category for sub items will be TAE or TAN--why are you checking with TANN--determine cost field??(what was the item category of your sub-item at sales order)
Pl update..
Phanikumar

Similar Messages

Problem with Packaging Material Type

Hello all Gurus,
I have a problem with a packaging material type that I have created copying the standrad Packaging material type LEIH. I created a new packing material type ZPAC - Packaging Material copying LEIH.
I then created a new material master record using this new material type ZPAC.
When I am using this material for packing in outbound delivery document - VL01N, I am getting the following strange error message:
20333 does not have packaging material type and is therefore not a pack.mat.
Please suggest me why this error is coming and how I can rectify this error. Is there any further configuration that I need to do for packaging material types??? Kindly suggest.
Thanks and Regards,
Umakanth.

Hi,
Material type is not enough, you have to maintain proper master data as well as config.
At least please maintain value in MARA-VHART for the packaging material. Please also check these links how HUM works:
http://www.sap-img.com/sap-hu.htm
http://help.sap.com/saphelp_crm40/helpdata/en/c8/a44b779f3211d2858d0000e81ddea0/frameset.htm
Regards,
Csaba

Material type for Vendors Returnable packaging material

Dear all,
I have a scenario where in i am recieving co2 gas from my vendor against a PO.
He is supplying it with cylinders i want to keep track of the cylinders and afetr using the gas want to return the cylinder to vendor.
Now the doubt arises, under which material type should I create this cylinder.
Doubt 1
I thougt of creating under the material type : LEIH, but this material type also contains the purchasing, accounting, sales view and same time in the config of the material type LEIH, value updating is not ticked, which is making me confuse.
Doubt 2
What I felt is, LEIH should be used for the our owns company returnable packaging material , which will go to the customer , but again for this also, these material should be valuated, since they belongs to our own stock , so why in standard SAP, value updation is not there.
Doubt 3
Keeping above 2 points in mind, what should be material type for vendor's returnable packaging material , where I want only qty tracking.
Regards
Nitin

You can copy LEIH and create your own Materia Type say ZLEI. For this material type you can have only General Plant / Storage Data1 view enabled.
Remember, there are 2 materials here:
1. Gas
2. Returnable packaging (cylinder)
You can receive gas on unit basis if you dont want exact tracking (ie in KG). Use any procurement material type.
When you create the PO only mainitan Gas as the material.
When you do the goods receipt against this PO, Click on RTP button, this will create a new line item, automatically and will suggest movement type 501+M. Here enter the no. of cylinders.
You will be able to track the movement of cylinders.

Material Master views for every material type

HI Expertis,
I am facing to the big problem. My requirement is to identify the Material Master Views relevent to the each and every Material Type.
As an example, for the material type "FGTR" what should be the required views to create material master?
From the MM01 Txn i found 36 Material types. Also found the standard views in "OMS2" Txn. But in OMS2 txn it gives me almost all the views in material master.
Atlease i hope to categorize the material types which are going to use same material views. So i can ask abaper to develop it.
these are the required Material types : MODE, FGTR, WETT, KMAT, LEER, LGUT, FERT, FOOD, INTR, CONT, IBAU, HERS, NLAG, NOF1, UNBW, HIBE, VERP, FRIP, PIPE, FHMI, ROH, LEIH, HALB, DIEN, ERSA, HAWA
I would be gratefully thank u, if u can guided me on this matter.
Thanx & Regards,
Rashika.

Hi,
You can ask your abaper to write a small program by using table t134(T134-PSTAT) and T132T .From this tables ,for each material type, you get all views.
User department Maintenance status
Work scheduling A
Accounting B
Classification C
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z
hopw this will help you.
With Regards,
Jaheer

Modifying standard material type configuration provided by SAP

I was recently involved in a discussion regarding whether or not to modify sap provided material types (e.g. FERT)
My position was that SAP provided material type configuration should not be modified, instead a z-version of the standard material type should be copied over to a z-version or a y-version (FERT copied as ZFRT), configurations changes made the z-version. My position was based on the following considerations:-
Reference to the original
Possible implication at the time of future releases or upgrades - In Some of my previous projects this was a reason why the standard material type configurations were never touched
Hence I am curious to know if there a more current or correct position on this topic.

Hi Jose,
You are absolutely correct that standard material type should not be changed as you can always reference to the original if you want to create a new material type by copying the old ones. I too have seen ZFRT and FERT.
I go by creating a Z one, as I have always the option to reference the original Material Type. As the above members have already replied the same.
It is very easy to check the material type like FERT, ROH etc. However, say you have changed the settings for standard material type like FHMI, LEIH, VERP etc and you want to create a new material type by referencing any of the above, you will need to check client 000 (as referred by Jurgen) to check what Pricing control it have S or V. What Item Category is in original. What selection of views are there in original etc. you always have a better edge to check from the originals if you do not change them.

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

Mandatory fields With reference to Material types

Dear Gurus,
I need to make few fields as mandatory with reference to material types while creation of the material master data.
For example:
For Semi finished and Finished Schedule margin key is required(mandatory)
For Raw Materials Schedule margin key is optional.
Regards,
Siddharth

Hi
find following step to make field mandatory for material type
Follow the stpes for making field as optional, required entry
1 click the tab ,(Which is u want to be Required entry )and get the field name by pressing F1 key and then
2.Go to T.Code: OMSR and enter that field name and get Selection Group
once you get selection group and field name
3 Use t.Code: OMS2 and click your material type and in next screen check Field reference ( you have assigned for material type; example :;For ROH material type the Field reference is ROH
3. Use T.code:OMS9,, Double Click your Field Reference and select field selection Group , & select round box of Required Entry or optional and save
check following link you will get clear idea [How to configure the fields required for each Material type ?;
Regards
Kailas ugale

SAP report for movement type and material type

Hi!
I would like to use a standard SAP report to give me a list of all the movement types (much like MB51) but instead of material I would like to select on Material type e.g. ROH. The result should for example be a list of the movement types 501 on material type ROH.
It is urgent, if you could help me I would be very greatful!
Sincerely
Anders Öhrling

Thanks for your answer!
I have managed to join the two tables and created a report that will work, except that the amounts in local currency that is given by movement type 201 is not negative (as in MB51). I need all movement types that generate a debit must be shown as a negative value. Wo when I summarize all the movement types I end up with the value of 101 minus 201.
Is that possible without ABAP programming?
Sincerely Anders Öhrling

Issue to make mandatory field(SELD/BBD and Date of manufactor)in migo for particular Material type and material Number starting with'1' series.

Hi friend,
i have issue regarding mandatory self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
Regard's,
shaikh Khalid.

Hi Shaikh
First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
Nabheet

Change material type - any warnings?

A material with very little history exists in the system as a semi-finished item with 1220 valuation class. One purchase order exists that is due in, in two days. No inventory exists. The problem is that the system is not configured to post goods against 1220 valuation class items. So it needs converted to a finished good since the plan is to sell it after it is received from a vendor.
No open orders or other movements exist in the system. Just one new open po that was created today, and could easily be deleted.
So, delete the po then change the material type using MMAM.
Are there any recommendations/warnings someone can offer before this is done?

Hi,
Pre requisites for changing a material types:
1. If you use a material ledger the material ledger must be settled in it.
2.If the old material type did not require you to specify a price control for the material the new material type must not be configured such that it allows only
standard price as price control.
3.If the material is already in stock or reservations exists or purchase orders exists the following conditions must exist.
      1. The stock values of the new material types must be updated in the same
          G/L Account as the stock values of the old material types
     2. Quantities and values of the new material types must be updated exactly as were by the old material types.
Regards,
nandha

Change material type

When i am changing the material type i am getting this msg. In Po items were deleted.
Change Material Type
The material type cannot be changed.
The reasons for this are:
Valuated stock exists (see valuation areas below).
However, account determination for the two material types differs.
(different account category reference or no valuation data defined)
Valuation area
1030
No open purchase order are there.

hi
plz check mmbe for the stock
check for the open PR and PO in ME5A and me2m
then try Change material type
Material Type can be changed using transaction MMAM
Menu: - Logistics > Material Management > Material Master > Material > Change Material Type
u can also use MMZ2 to change material type and ind sec
Refer following link for the same;
http://www.sap123.com/showthread.php?t=21
regards
kunal

Relationship between material type and industry sector

Hi experts
when using t-code mm01,there are two fields material type and industry setor in screen.Is there any relationship between material type and industry sector? I want to know if user be able to see the material type related to particular industry sector?
thanks in advance!

Hello
There is no direct relationship between the material type and the industry sector.
The industry sector is used only for field sttus maintenance (fields in display/optional/requierd entry) in transactions.
We will assign seperate field reference groups to industry sectors and deopending on how we configure the field references, the fields will appear for the materials created for that industry sector.
regards

Allow mov type 261 and 262 for a material type only

Requirement is to allow movt type 261 and 262 for a particular material type.( Assume Only 261 - 262 issue transactions happen against that material type.)
User to be restricted, while material issue (migo), for the material type XXXX to 261 - 262 movt type only.
No any other movt type allowed for this material type while issuing material.
All suggestions welcomed.
Regards,
Rakesh

Thanx amit.
But same user uses all other movt types for other material type also.

Different Material Types in different Plants

Hi,
I have 2 Plant under a Company Code. A material being produced in plant A has to be sent to Plant B for further processing. I would like to maintain single material master for both the plants, but different Material Types. Material has to be treated as Finished Goods in Plant A and Raw Material at Plant B. Could any one please let me know how I can MAP it in SAP.
Regards,
Nagaraja Achar.

Hi,
For the Same material Code you can not maintain two material types in two plants..
But you can make a Z* mat type with all the relevant views of FG & ROH..
For Plant 1 it will have all the views
and for Plant 2 extend only the ROH relevant views...
Thx
Raju

Hide views in MM01 for all material type in one time

Hi,
I have a requirement to hide the views for all material type at at time.
i tried with OMS2 , it is allowing me to do for one matrial type.
could any one tell me how to hide the views for all material type in one short.
Thanks in adv..

Hi Rakesh,
Up to my knowledge it is not possible to do view setting for all material type in one shot simply because it is material type dependent.
If trying to change fields in material master then use OMS9. This also material type linked to field reference group. And we can change the setting of field selection group in one shot. This will affect the material types linked to it.
Hope it helps
sBk

Material Type LEIH - LEER

Similar Messages

Maybe you are looking for