Material type with Different valuation class and gl assignment

Hi Experts
I have several division in Material Type Spare Parts ( like Generator, Electrical, Mechanical). I have to assign different gl account for each material type. We know one material type is assigned only one account category reference. So how we can assign different gl account for same material type using valuation class.

You can assign different G/Ls to different materials by creating valuation classes and assigning different G/Ls to those valuation classes and then assigning those valuation classes to materials.
You cannot assign G/Ls to material type.
Now if you want different G/Ls to be assigned to same material, you need to use split valuation.

Similar Messages

  • Tcode MB1B (Transfer Postings) material with different Valuation class

    Hi,
    is it possible to avoide tcoce MB1B for material with different valuation class?
    Materia1 (001000) has valuation class: 3000
    Materia2 (300000) has valuation class: 7900
    I don't want allowed MB1B with Material1 (3000) to Material2 (7900).
    Thanks.
    regards, Dieter

    Hi,
    Yes, It is possible to avoide tcoce MB1B for material with different valuation class.
    Regards
    Md.MahaboobKhan

  • Relation between Valuation Classes and material type

    Dear all,
    How i can keep relationship between valuation class & material type.
    Can i put many valuation classes & single material type and vice versa.
    Regards,
    Nitin PAtil

    Nitin,
    Valuation class is used for automatic account determination .Valuation class is depend on material type.
    Valuation class is key used to group together material with same account determination.
    Valuation class is assigned to Material type via account category reference.
    Same valuation class can be assigned to differnt material type if they belong to same account category reference.
    However only one account category reference is assigned to one material type.
    For Ex.
    Mat Type         Act Cat Ref             Valuation class(only example)
    ROH                0001                          3001,3002,3000
    HALB               0001                          3001,3002,3003
    FERT                0002                          7900 , 7902
    I hope this will clear your concept.
    Vivek

  • Material groups, valuation classes and GL acccounts

    HI Gurus,
    I need to setup new material groups with descriptions, valuaiton classess and their related GL accounts. What steps do i nned to follow.
    PLease explain '
    Thanks
    Anusha

    Go to transacition OMSF to define the material group
    Go to transaciotn OMSK to define the valuation class
    here you can define or use existing A/C ategory reference than create valuation calss and assign the A/C category to that valution class and next step you can assign the material type
    G/L account you can define in FS00 transaciotn and you can assign them to the valution class in OBYC transcation.

  • How to setup new valuation class and link it with gl a/c

    hi
    can some one help me setting up new valuation class and then how to link it with gl a/c
    i m new so if some one can explain me in steps then that would b awsome.
    thanx

    Hi Iqbal,
    Follow the below path for defining valuation class ;
    SPRO>Materials Management>Valuation and Account Assignment>Account Determination>Account Determination Without Wizard--Define Valuation Classes
    Note that Valuation class is linked to account category reference.
    Account category ref is linked to Material Type.
    Thus the system determines Valuation Class for a particular mat.type.
    For detmining G/l accounts:
    SPRO>Materials Management>Valuation and Account Assignment>Account Determination>Account Determination Without Wizard--Configure automatic postings
    Click on account assignment. Double click on BSX , enter chart of accounts .
    Against every valuation class you can find the G/L accounts.
    Regards
    Ramesh Ch

  • Valuation class and movement type

    Hi sirs,
    What exactly mean by valuation class and is there any sublink to valuation class and movement type.
    BSR

    Hi BSR,
    Regarding the meaning of valuation class and link between valuation class and movement type, you just have to understand this.
    <b>valuation class + movement type = transaction key --> GL account</b>
    explanation :
    <b>Valuation class</b>
    It is a field maintained in the accounting view 1 of Material master. This is nothing but the classification of material like Raw material, Finished goods, WP, stores & spares etc. It is indicated as numerical number.
    <b>Movement type</b>
    This is a 3 digit numerical code which is used for all material movement in MM module. Say for example movement type 101 is used for Goods receipt from vendor or from production.
    <b>Transaction Key</b>
    The combination of valuation class and the movement type translates into a transaction key which indicates the type of transaction.
    remember:
    The combination of Valuation Class + the Movement Type helps in determining the GL accounts automatic updates.
    hope it helps and don't forget to assign points.
    regards,
    Lily

  • Material Ledger with Split Valuation Type 'X' with FIFO

    Hi,
       The requirement from the customer is to have Raw Material, Intermediary and Finished Products valued at Actuals and on a FIFO basis. According to me, this is possible only if we activate Material Ledger, have batch split valuation u2018Xu2019 as the valuation type and have a batch search strategy which does a FIFO. Are there any technical issues with this solution? Or is there a better solution? Is any organisation ever using this solution for a similar requirement? As an extension of this requirement, how does commodity trading companies running in SAP handle their inventory and COGS valuation?
    Thanks and Regards
    Shivram.

    Hi,
    Using Material Ledger with batch management and split valuation of each batch ("X") leads to most aaccurate FIFO valuation result, however, depending on how many material and batch the customer has, huge number of materials will be processed and it will affect the performance issues. You should check the number and expected period-end time frame scheduling at least.
    Financial responsible tell you to need this kind of solution (detailed FIFO calculation)?
    They usualy needs to get simple FIFO valuation, meaning they don't care each individual logistic material movement as FIFO, but only care of periodic FIFO. I know, it depends on Finacial responsibes or their auditors, so it's also not general.
    Please double-check the new FIFO valuation function for Material Ledger with using Periodic Closing and AVR. Some information is in SAP Note 1431829 and 1247053. Related transactions are there, CKLMBB_xxxx under Actual Costing/Material Ledger -> Balance Sheet Valuation Procedures. I couldn't find any official documents for Material Ledger + FIFO valuation (like Release Notes).
    Hope this will be an additional option to yours.
    Best regards, Takashi

  • Back posting only possible with same valuation class

    Hii, I made changes in valuation class before that i closed all the open po and maintained stock zero using 201 mvt type on 31st March. Now the system is throwing error when Im doing the reversal using MB1A 202 mvt type like "Back posting only possible with same valuation class". But its taking if I take the Posting date to 1st April, and we want to post on the 31st MArch. Please provide the suggestion.
    Thanks,
    Manoj

    System is behaving correctly..
    Suppose you have changed the valuation class from X to Y as on 31.03.2014.
    So your valuation class was X as on 31.03.2014.
    But now your valuation class is changed as Y. and system will always try to post the valuation class Y for material.
    So when you are trying to reverse the entry on 31.03.2014, system shows the error..
    In that case, you should change the valuation class as on 30.03.2014 and you should do 201 movement type as on 30.03.2014, and then as on 31.03.2014, you can reverse the entry..
    Now you have to reverse the 201 movement type after date 31.03.2014.
    Regards
    Dev

  • Can a PO contain line items with different valuation classses?

    You advice will be deeply appreciated.
    Thanks,
    Linda

    Hi
    Valuation class depend on material Mater  and material gruop
    as per stander for one material  master you have one valuation class
    If your material is split valuation then according to valuation type you can assign valuation class in material master
    But for same material with differnt valuation class in po it is not possible unless you have differnt material code
    Regards
    Kailas Ugale

  • Valuation class and Account Category reference

    Dear Friends.
    Please Can I know Valuation class and Account Category reference for following Material Types?
    1)     Advertisement material- what is Valuation class and Account Category reference ?
    2)     Asset Material- what is Valuation class and Account Category reference ?
    3)     Trading goods-what is Valuation class and Account Category reference ?
    4)     Engineering Material-what is Valuation class and Account Category reference ?
    regards,
    Mahesh.
    Edited by: mahesh A on Jun 8, 2011 8:17 AM
    Note : Please search forum before posting,follow forum rules.
    Edited by: Jeyakanthan A on Jun 8, 2011 11:54 AM

    Please check these answered links:
    Re: What is account category reference in Account determntn??
    changing the account category reference
    Re: account category reference
    Change of Account Category Reference
    Re: What is account category reference in Account determntn??
    Edited by: Afshad Irani on Apr 29, 2010 12:07 PM

  • Different Valuation Class for Valuation category C1,C2,C3

    Hi All,
    I created a material with valuation category C. The material had valuation class 3042 which I created as per requirement of client. Now when I am extending the same material for valuation category C1, C2, C3 the system is only allowing me to choose valuation class 3040 which is standard sap valuation class for spare parts. Can anyone suggest if I need to create separate valuation class for C1, C2 & C3. I have split valuation also activated in the system.

    Go to MMAM  and then give the material and give the new valuation class and execute it.  That material have change from old valuation class to new valuation class.
    Example:  You create material No: 678 under the Finished goods. Finished goods valuation class is 7920 is assigned in Accounting Tab 1. You want to change "678" material  to Raw Material.
    Go to T.Code : MMAM
    Material                                : 678
    New Valuation Class             : Raw Material ( Select from F4)
                                                   Which Valuation area you want
    Old Valuation Class              : Finished goods ( its under gray mode
                                                                              i.e can not change)
    Edited by: Ganti on Dec 4, 2010 9:08 AM

  • One material extention to different sales areas and Act .***.grps?

    Hi,
    I have one material for which i need to extend the material to different distribution channels,divisions and account assignment groups in this case can i extend one material to different sales areas as mentioned above or i need to create one more material with same material master data except the sales view data?
    thanks.

    I have extended the same material to 2 different distribution channels and divisions but when iam checking in display view of MM for different distribution channels divions should be different as i have given divisions also different but in my case the last saved division only appearing for both different distribution channels.
    Second thing in MVKE table iam not able to find the division field(SPART)?
    Is iam missing any setting?
    Thanks!

  • Valuation class and Ledger account

    Hi everybody,
    We just create a new valuation class and now we want to link it to a ledger account.
    Does anybody know to do this ?
    Thanks for your help.
    Regards,
    BT

    Dear,
    Please go through the link.
    Re: how to setup new valuation class and link it with gl a/c

  • Material type with No. ranges

    Great day dear pandits,
    I am preparing customer specific config document.
    I wish to maintain the material type with corresponding sl.No.  MMNR will give No. ranges only OMS2 will give material type.
    Precisely, I want material type in one col. and corresponding No. ranges in the other.
    It is possible,
    thanks
    v balajee

    great gudos
    v balajee

  • Interfaces casts are type-checked differently to class casts?

    hi,
    this is a multipost of
    http://forum.java.sun.com/thread.jspa?threadID=677488&tstart=0
    as i'm hoping some compiler guys are hanging around in here :)
    I'm just wondering why interfaces are type-checked differently to class casts when casting between siblings in the inheritance hierarchy.
    e.g. casting a String to an Integer fails, but declaring
    interface IString {
       String toUpperCase();
    interface IInteger {
       int intValue();
    } and casting between IString and IInteger works fine?
    any help appreciated,
    thanks,
    asjf

    Unless you have specific memory usage requirements so that you must use arrays, just use a java.util.List:
    public abstract class Type<A extends Arg> {
        protected abstract List<A> method();
       // or if the only needs to read it can be more convenient to have
        protected abstract List<? extends A> method2();
    public class Sub extends Type<SubArgs> {
        protected List<SubArgs> method() { ... }
        // sub class can be more specific for method2 if it wants to
        protected List<SubArgs> method2() { ... }
    }

Maybe you are looking for

  • How to use different SRIDs in one map?

    Hi, I created a map where one theme comes from a table with geometries in SRID 8307, and another theme comes from a table with geometries in SRID 82027. The tables have the necessary entries in USER_SDO_GEOM_METADATA. From what I read in the document

  • Can you choose email address for autofill?

    Hi all, Searched and could not find an answer. Can you choose which email address you would like to autofill when completing a form (that is when you have more than one email address in your address card)? Thank you. S

  • Issue with reinstalling a brand new mac pro

    I was recomended to reinstall the leopard since I had some issues with my new 27" cinema display.( there is an update for the cinema display and my mac did not allow me to updat it so apple care person told me to reinstall the leopard. After 15 minut

  • Unarchiving a .pcf file at start up

    Recently, I had to clone my drive and install the new one. Everything seems to be working, as I'm able to access all my programs, files, etc. However, at the start up, just before the desktop propagates, the screen reads "unarchiving...(some file)" a

  • Parent/child records from same table

    I want to create a query that is a union such that the 2nd resultset is based on the 1st resultset. I have a table that has parent/child records in the same table. Table: EVENTS EVENT_ID PARENT_EVENT_ID CREATED_DATE (other columns) if PARENT_EVENT_ID