Materialized View and Database startup
I have materialized view created using following query
CREATE MATERIALIZED VIEW dept_mv_dltb
REFRESH FAST START WITH SYSDATE
NEXT SYSDATE + 1/1440
WITH PRIMARY KEY
AS SELECT * FROM department@phinixdept
I have log created on department table.
Whenever my database gets restarted, my mv doesnt get refreshed.
Please suggest a solution.
It doesnt refresh ever again.
I am using Oracle 9.2.0.5
It does work after creation. But fails only when my database gets restarted.
Followings are the trace file contents
ORA-12012: error on auto execute of job 50
ORA-12560: TNS:protocol adapter error
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 803
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 860
ORA-06512: at "SYS.DBMS_IREFRESH", line 683
ORA-06512: at "SYS.DBMS_REFRESH", line 195
ORA-06512: at line 1
*** SESSION ID:(22.14163) 2007-09-15 23:37:18.810
*** 2007-09-15 23:37:18.810
ORA-12012: error on auto execute of job 50
ORA-12560: TNS:protocol adapter error
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 803
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 860
ORA-06512: at "SYS.DBMS_IREFRESH", line 683
ORA-06512: at "SYS.DBMS_REFRESH", line 195
ORA-06512: at line 1
Message was edited by:
Pravin Pawar
Similar Messages
-
Updatable Materialized View and Master Table on same database
Hi all,
My first question - Is it possible to have an Updatable Materialized View and the associated Master Table located on the same database?
This is the requirement scenario:
One unique database D exists.
A is a batch table. Only inserts are allowed on Table A.
M is an updatable materialized view on Table A (Master). Only updates are allowed on M (no insert or delete).
Requirement is to push updates/changes from M to A periodically and then get the new inserted records from A into M via a refresh.
Is this possible? What other approaches are applicable here?John,
My question is related to the implementation and setup of the environment as explained in the above example. How can I achieve this considering that I have created an updatable m-view?
If possible, how do I push changes made to an updatable m-view back to it's master table when/before I execute DBMS_MVIEW.REFRESH on the m-view? What is the procedure to do this if both table and mview exist on the same database? Do I need to create master groups, materialized view refresh groups, etc.?
One more thing.. Is there a way to retain changes to the m-view during refresh? In this case, only newly inserted/updated records in the associated table would get inserted into m-view. Whereas changes made to m-view records would stay as-is.
Hope my question is directed well. Thanks for your help.
- Ankit -
Materialized View and I_SNAP$ Indexes
Hello Everybody,
At the time of doing REFRESH of the Materialized View, we are getting error like -
SQL> EXECUTE DBMS_MVIEW.REFRESH('MV_TEST.MY_VIEW,'CF');
BEGIN DBMS_MVIEW.REFRESH('MV_TEST.MY_VIEW,'CF'); END;
ERROR at line 1:
ORA-12008: error in materialized view refresh path
ORA-00001: unique constraint (MV_TEST.I_SNAP$_FIN_RESULT_EXPENSE1) violated
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2545
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2751
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2720
ORA-06512: at line 1
I tried to drop and recreate the index I_SNAP$_FIN_RESULT_EXPENSE1 but it didn’t helped.
Later I dropped the index I_SNAP$_FIN_RESULT_EXPENSE1 and refreshed the materialized view and it was successful (obvious). But when I tried to recreate the index, I got the following error –
SYS_OP_MAP_NONNULL("FIN_MULT"), SYS_OP_MAP_NONNULL("FIN_CD"))
ERROR at line 8:
ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
When I look at the value of SYS_OP_MAP_NONNULL('FIN_CD'), it seems to be unique.
SQL> select SYS_OP_MAP_NONNULL('FIN_CD') from dual;
SYS_OP_MAP_NONNULL('FIN_CD’)
46494E5F5650545F4C564C5F335F434400
My questions are:
1. Why are the indexes (I_SNAP$_*) automatically created for?
2. What is the purpose of these (I_SNAP$_*) indexes?
3. What harm can be there if we drop these (I_SNAP$_*) indexes?
4. Why it is complaining about the Duplicate records / Uniqueness?
5. How to know where exactly the problem is in this case?
6. What is the solution for this problem? How to recreate these indexes successfully?
Thanks!Hello Rafi,
I don't have any MLOG$_<table> in the database, After connecting as SYS -
SQL> select tname from tab where tname like '%MLOG%';
TNAME
MLOG_REFCOL$
MLOG$
C_MLOG#
SQL> select count(*) from mlog$;
COUNT(*)
0
I am not using Replication here -
SQL> select tname from tab where tname like '%RUPD%';
no rows selected
Why you think that granting SELECT access to MLOG$_* tables will solve this issue?
Thanks,
Roopesh -
Materialized view and snapshot
Hi gurus,
Could you please tell me what is the difference between materialized view and snapshot.
Regards
KoustavA snapshot, is in general terms, a picture, a click of a camera, an image that captures the position/state of something at sometime.
Snapshot in a database can take many points of view.
Materialized view (MV) is an object in Oracle database. It "materializes" a view, by taking a snapshot, of the view when you actually create the MV, and preserve it for future use. It can be refreshed in several available ways.
A view doesn't occupy any space, a MV does.
HTH,
Aswin. -
Materialized view and Partition
Hi,
I want to discuss a scenario, with which i am dealing nowadays. there is only a single table (named livecdr ) has 22-23 fields and the records are updating in every sec (on daily basis) and in 24hrs livecdr contains approximately more than 2 crore records.
Problem is that the query processing time is so slow due to large number of records and query is fetching records from a view created on livecdr table. I want to know the options, how the query would fetch these records in a short time. Firstly i did range partitioning on livecdr and then i created materlized view but the view didn't create on partition table and when i removed partitioning it was created. After view creation, query performance is much better. i also applied indexing on livecdr.
Can you please tell me, whether this approach is okay or i am doing mistake. should i create partitioning on materialized view and how would i select records from view if partitioning would be applied on materialized view. Please guide me with best approaches.
thankyou.Hello,
Here is how I created partitioned table (monthly partitions) and partitioned mview on the table. This is just an example you might have to change the mview partitions from monhtly to yearly or quartely.
CREATE TABLE live_cdr
CALLID VARCHAR2 (20),
CD VARCHAR2 (25),
CG VARCHAR2 (25),
RE VARCHAR2 (25),
OPC VARCHAR2 (12),
DPC VARCHAR2 (12),
STIME VARCHAR2 (25),
SDATE DATE,
ATIME VARCHAR2 (25),
ADATE DATE,
ETIME VARCHAR2 (25),
EDATE DATE,
schangeTime VARCHAR2 (25),
schangeDate DATE,
STATUS VARCHAR2 (25),
bucket NUMBER (20),
CIC NUMBER (20),
charge VARCHAR2 (30),
ported VARCHAR2 (30),
jurisdiction_Info VARCHAR2 (30),
origLine_Info CHAR (1),
Variant NUMBER,
auto_inc NUMBER
PARTITION BY RANGE (EDATE)
PARTITION LIVE_CDR_JAN_2009 VALUES LESS THAN (TO_DATE(' 2009-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS,
PARTITION LIVE_CDR_FEB_2009 VALUES LESS THAN (TO_DATE(' 2009-03-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
);Mview definition
CREATE MATERIALIZED VIEW KLONDIKE.LIVE_CDR_MV
LOGGING
PARTITION BY RANGE (EDATE)
PARTITION LIVE_CDR_MV_JAN_2009 VALUES LESS THAN (TO_DATE('20090201',
'YYYYMMDD'))
LOGGING
NOCOMPRESS,
PARTITION LIVE_CDR_MV_FEB_2009 VALUES LESS THAN (TO_DATE('20090301',
'YYYYMMDD'))
LOGGING
NOCOMPRESS
BUILD IMMEDIATE
REFRESH COMPLETE
START WITH SYSDATE
NEXT SYSDATE + 2 /24
AS
SELECT DISTINCT (ic.callid) callid,
ic.CG,
ic.CD,
ic.RE,
ic.OPC,
ic.DPC,
ic.SDATE,
ic.STIME,
ac.ADATE,
ac.ATIME,
ec.ETIME,
ec.EDATE,
ec.STATUS
FROM live_cdr ic, live_cdr ac, live_cdr ec
WHERE ic.callid = ac.callid
AND ic.callid = ec.callid
AND ic.stime = ac.stime
AND ic.stime = ec.stime
AND ic.sdate = ac.sdate
AND ic.sdate = ec.sdate
AND ac.ADATE IS NOT NULL
AND ec.EDATe IS NOT NULL
AND ec.etime IS NOT NULL
AND ic.CD IS NOT NULL
AND ic.cg IS NOT NULL;Regards -
Diff materialized view and view
what is diff materialized view and view
Check these documents please
[Overview of Materialized Views|http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/schema.htm#CNCPT411]
[Overview of Views|http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/schema.htm#i20690]
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com -
Materialized View and Ord Media questions
Hey Guys,
My first question is on the use and creation of materialized views which i have previously done using TOAD. The question that i have is where/if can i visually see the constraints that are on a materialized view and where is the information for "next refresh" times placed?
Question two is about viewing informaiton on ord media objects that are stored. Previously, i had the ability to double click one of these elememts in the data view and see the information related to that instance of the ord media object, but the SQL developer does not seem to have this ability??
Thanks in advance.Thanks Kris,
The reason that i asked about the constraints on MV is because when you create a materialized view over a db link with primary key, it will place a not null constraint on every column. This is obviously no good because some rows are bound to contain nulls and these need to be removed and updated before it will work!
As for the ord objects, it just makes it a little easier for testing to see what they are :).
Anyway, its looking great and i hope these features will be in the next release?
Cheers David -
Materialized view and policies
Hello,
We created an materialized view and on this view why created a policy.
SYS.DBMS_RLS.ADD_POLICY
Now we added some values to the MV via drop MV and create MV.
The policy on this MV is gone after the drop statement.
Is there away to secure this?
Thanks,
RemcoWhy are you dropping and re-creating the materialized view in the first place? That's not something that should ever happen in a live system. You should just be refreshing the data in the materialized view, in which case the privileges & policies associated with the materialized view would be retained. It's no different than dropping and re-creating a table that has a policy associated with it-- you'd have to re-apply the policy after re-creating the table.
Theoretically, I suppose you could create a DDL trigger that would throw an error if you tried to drop an object with an associated policy. Fixing your approach, though, so that you're not dropping & re-creating objects is going to be the better long-term solution.
Justin -
Issue with materialized view and fast refresh between Oracle 10g and 11g
Hi all,
I've hit a problem when trying to create a fast-refreshable materialized view.
I've got two databases, one 10.2.0.10, another 11.2.0.1.0, running on 32-bit Windows. Both are enterprise edition, and I'm trying to pull data from the 10g one into the 11g one. I can happily query across the database link from 11g to 10g, and can use complete refresh with no problem except the time it takes.
On the 10g side, I've got tables with primary keys and m.v. logs created, the logs being of this form ...
CREATE MATERIALIZED VIEW LOG ON table WITH PRIMARY KEY INCLUDING NEW VALUES
On the 11g side, when I try to create an m.v. against that ...
CREATE MATERIALIZED VIEW mv_table REFRESH FAST WITH PRIMARY KEY AS SELECT col1, col2 FROM table@dblink;
... I get an ORA-12028 error (materialized view type is not supported by master site).
After running the EXPLAIN_MVIEW procedure it shows this;
REFRESH_FAST_AFTER_INSERT not supported for this type mv by Oracle version at master site
A colleague has managed to build a fast-refresh m.v. from the same source database, but pulling to a different one than I'm using; his target is also 10g, like the (common) source, so I've no idea why I'm getting the 'not supported' message whilst he isn't.
I've been able, on previous projects, to do exactly what I'm trying to achieve but on those someone with more knowledge than me has configured the database!
I'm now stumped. I'm also no DBA but despite that it's been left to me to install the new 11g database on the 32-bit Windows server from scratch, so there are probably a couple of things I'm missing. It's probably something really obvious but I don't really know where to look now.
If anyone can give me any pointers at all, I'd be really grateful. This question is also duplicated in the Replication forum but hasn't had any replies as yet, so I'm reproducing it here in hope!
Thanks in advance,
SteveHi Steve,
You should have a look at metalink, Doc ID 1059547.1
If that does not help, there may be something else in Mater note ID 1353040.1
Best regards
Peter -
Moving all Materialized View and logs at schema level using data pump
Hi Experts,
Please help me on how can I exp/imp all Materialized Views andMV logs (as these are local MVs) only of complete schema to other database. I want to exlude everything else.
Regards
-Samar-Use DBMS_METADATA. Create the following SQL script:
SET FEEDBACK OFF
SET SERVEROUTPUT ON FORMAT WORD_WRAPPED
SET TERMOUT OFF
SPOOL C:\TEMP\MVIEW.SQL
DECLARE
CURSOR V_MLOG_CUR
IS
SELECT DBMS_METADATA.GET_DDL('MATERIALIZED_VIEW_LOG',LOG_TABLE) DDL
FROM USER_MVIEW_LOGS;
CURSOR V_MVIEW_CUR
IS
SELECT DBMS_METADATA.GET_DDL('MATERIALIZED_VIEW',MVIEW_NAME) DDL
FROM USER_MVIEWS;
BEGIN
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'SQLTERMINATOR',TRUE);
FOR V_REC IN V_MLOG_CUR LOOP
DBMS_OUTPUT.PUT_LINE(V_REC.DDL);
END LOOP;
FOR V_REC IN V_MVIEW_CUR LOOP
DBMS_OUTPUT.PUT_LINE(V_REC.DDL);
END LOOP;
END;
SPOOL OFFIn my case script is saved as C:\TEMP\MVIEW_GEN.SQL. Now I'll create a mview log and mview in SCOTT schema and run the above script:
SQL> CREATE MATERIALIZED VIEW LOG ON EMP
2 /
Materialized view log created.
SQL> CREATE MATERIALIZED VIEW EMP_MV
2 AS SELECT * FROM EMP
3 /
Materialized view created.
SQL> @C:\TEMP\MVIEW_GEN
SQL> Running script C:\TEMP\MVIEW_GEN.SQL generated a spool file C:\TEMP\MVIEW.SQL:
CREATE MATERIALIZED VIEW LOG ON "SCOTT"."EMP"
PCTFREE 10 PCTUSED 30 INITRANS
1 MAXTRANS 255 LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL
DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "USERS"
WITH PRIMARY KEY EXCLUDING NEW VALUES;
CREATE MATERIALIZED VIEW "SCOTT"."EMP_MV" ("EMPNO", "ENAME", "JOB", "MGR",
"HIREDATE", "SAL", "COMM", "DEPTNO")
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40
INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576
MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1
BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE
"USERS"
BUILD IMMEDIATE
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE
DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "USERS"
REFRESH FORCE ON
DEMAND
WITH PRIMARY KEY USING DEFAULT LOCAL ROLLBACK SEGMENT
USING ENFORCED
CONSTRAINTS DISABLE QUERY REWRITE
AS SELECT "EMP"."EMPNO"
"EMPNO","EMP"."ENAME" "ENAME","EMP"."JOB" "JOB","EMP"."MGR"
"MGR","EMP"."HIREDATE" "HIREDATE","EMP"."SAL" "SAL","EMP"."COMM"
"COMM","EMP"."DEPTNO" "DEPTNO" FROM "EMP" "EMP";
Now you can run this on other database. You might need to adjust tablespace and storage clauses. Or you can add more DBMS_METADATA.SET_TRANSFORM_PARAM calls to C:\TEMP\MVIEW_GEN.SQL to force DBMS_METADATA not to include tablespace or/and storage clauses.
SY. -
Materialized View and Refresh Fast
Hi,
Below is a sample query for generating a MV. Since I am new to Oracle,
Experts please help me.
create materialized view user1.mv_empdept refresh fast
as select * from user1.employee e
where exists(select * from user2.department d where d.deptId=e.deptid);
Is it possible to have a MV with objects from different schema of the same
database for Refresh Fast?
I ran into "insufficient privileges" error eventhough both user1 and user2 have sysdba privileges.
Thanks,
JaganHi Ajiaz,
User user1 has select privileges on Department table.
if we omit "refresh fast" in the query, I am able to create the MV
create materialized view user1.mv_empdept refresh fast
as select * from user1.employee e
where exists(select * from user2.department d where d.deptId=e.deptid);
Regards,
Jagan Kumar K -
Question on MATERIALIZED VIEW and table
HI
there are table (name is test123) and MATERIALIZED VIEW (name also is test123) stored in the same schema (name is schema123).
If I run sql : select from schema123.test123;*
I wanna know the result data I get is data of table test123 or MATERIALIZED VIEW test123, which one of them?
Thanks in advance!What is your database version?
How did you even manage to create two objects with the same name?
As I know, it is impossible, oracle will throw errors like below:
SQL> create table FOO (str varchar2(5), num number(3,0));
Table created.
SQL> CREATE MATERIALIZED VIEW FOO
2 BUILD DEFERRED
3 REFRESH COMPLETE ON DEMAND
4 enable query rewrite as
5 select SUM(NUM)
6 from FOO GROUP BY STR;
from FOO GROUP BY STR
ERROR at line 6:
ORA-00955: name is already used by an existing object
SQL> -
Hi guys,
A materialized view table created with NOLOGGING option generate archivelogs when I execute a refresh command ?
ThanksThat depends at least on Oracle version, refresh method and whether you have put your database and/or tablespace in force logging mode.
I won't cover all combinations but at least you should understand that
1) till 9i (including) the default mechanism for complete refresh is truncate and insert /*+ append */
2) since 10g it is delete and conventional insert
3) complete refresh is done as mentioned above, incremental refresh uses normal DML (without truncate and insert /*+append*/)
4) if you r db and/or tablespace is in force loggng mode then nologging clauses and /*+append*/ hints are ignored
So generally it depends :)
Gints Plivna
http://www.gplivna.eu -
Materialized view and starting time
Hi,
There is already this materialized view in the database that starts at Three A.M.:
CREATE MATERIALIZED VIEW ovm_position_det
BUILD IMMEDIATE
REFRESH FORCE
NEXT TRUNC(SYSDATE) + 1 + 3/24
WITH PRIMARY KEY
I have to create a second one, I wonder if I can write
NEXT TRUNC(SYSDATE) + 1 + 3.5/24
To start it at 3:30 A.M.
(Both take about 10 minutes query time on the production database).
Many thanks for your helpJean
Yes you can. It's just simple date arithmetic.
<date> + <number> means <number> days after the date.
DATE goes down to seconds - so if you want it tomorrow at 3.30 and 20 seconds you can say
TRUNC(SYSDATE) + 1 + 3/24 + 30/(60*24) + 20/(60*60*24)
or generally:
TRUNC(SYSDATE) + days + (hours + (minutes + seconds/60)/60)/24
HTH
Regards Nigel -
Materialized View and Redo Information
Hi!!
I have created a materialized view with fast refresh. I have created a materialized view log on master table with NOLOGING. My view is refresh every 3 seconds but My problem is that my archivelogs is now growing so much!!!
Please, How I avoid that redo information increasing so much?
Thank you,
Roxana.I want to show on line some tables of my database,
because I have created materialized view every 3
seconds on test enviroment. I'm not sure I follow exactly what you're saying here.
- Are you sure that you need materialized views here? And not just a regular view? If you need to display the data online and you need a lag of no more than three seconds, is there some reason that you're not using a regular old view? Are you doing some significant aggregation of the data?
- Are you sure that you need the materialized views to refresh every 3 seconds? And not on some longer interval?
- If you're looking for near real-time data replication, you may be better served by using Streams rather than materialized views.
When I use stand by database, I have to replica my
full database???.- I'm assuming this is a completely separate question with no relation to the previous section.
- Yes, DataGuard (physical or logical) would create and maintain a copy of your existing database on a separate server in order to fail over in the event of a disaster or to be a reporting server.
Justin
Maybe you are looking for
-
I am using spy camera 808 which has the same 1280 by 720 H264 AAC as an itouch for filming. Problems occour in fincal cut pro 6.06 on export if i export 808 on its own no issue the issue is the itouch messes up the time liine on sound video, example
-
Hello, I'm working on OSX Version 10.9.4. Recently, I started using Time Warner Cable for internet. All other devices work fine with the Wi-Fi. iMac was originally connected to our wi-fi network and ran fine. Periodically, the wi-fi would loose a co
-
Multiple servers -- multiple Cache (JWS)
Hi, I'm working on a Kana Software deployed with Java Web Start. Each time we change the web server (crash or ...) we have to download all soft components (jar, Jre ...) even if the user has already exactly the same files on his machine but under an
-
I can´t install snow leopard in one lion partition
I have created the partition running Mac OS X lion, rebooted the system with option (or C) key and my macbook crashes and shows a sign saying 'you need to switch of the computer, hold down the .... and restart' and I am not able to install snow leopa
-
Project settlement in case of revenues
Hi Gurus, In our case cost and revenue gets settled to wbs from service order. And from wbs cost should settle to cost center. What about revenues settlement from wbs...Should it happen or not...what is the correct process???? Thank you