Materials for HR Module

Hi all,
I need the material for HR Module. Please give me some basic details of HR Module.
Thanks,

Hi Ragu,
Pls. refer to the following thread.
SAP ERP Human Capital Management (SAP ERP HCM)
Regards,
Dilek

Similar Messages

LE-TRA : automatic determination of the route for MM module

Hi guys,
for the automatic determination of the route for MM module is it mandatory to fill the storage location?
Thanks in advance,
Dom.

Dominique,
Route determination uses the country code and transportation zone from the address records as some of the inputs into the route determination. Dependent on the IS solution you are using and SAP version the configeration determines how the route is determined.
If you are on a standard EEC 6.0 system try the configuration path (transaction SPRO)
Materials Management -> Purchasing Purchase Order-> Set up Stock Transport Order -> Set Up Stock Transfer Between Storage Locations -> Set Up Storage-Location-Dependent Shipping Point Determination ->
Define Rule for Determination of Shipping Point
Assign Shipping Points According to Storage Location
Logistics Execution -> Shipping -> Basic Shipping Functions -> Routes -> Route Determination
For an STO the from address record is take "from" the shipping point (determined from plant or storage location see configuration options above) and the "to" this the receiving plant.
James

Provide me the docs for knowledge modules

Hi All,
Please provide me the Materials for understanding Knowledge modules.
I need to understand more on knowledge modules as I am new to ODI tool.

Hi Sri,
If this is what you require, please mark the thread as answered and allocate helpful/correct points to close the thread.
Thanks
Bos

How to log input parameters for Function Modules?

Hi,
I need to create a Logging system to trace input parameters for function modules.
The log functionality could be done by developing a class method or a function module (For example 'write_log'), and calling it within each function module that I want to log. The 'write_log' code should be independent from the interface of the Function Module that I want to log.
For example, I'd like to write a function/class method that can log both these functions modules:
Function DummyA
   Input parameters: A1 type char10, A2 type char10.
Function DummyB
   Input parameters: B1 type char20, B2 type char20, B3 type char20, B4 type Z_MYSTRUCTURE
Now the questions...
- Is there a "standard SAP" function that provide this functionality?
- If not, is there a system variable in which I can access runtime all parameters name, type and value for a particular function module?
- If not, how can I loop at Input parameters in a way that is independent from the function module interface?
Thank you in advance for helping!

check this sample code. here i am capturing only parameters (import) values. you can extend this to capture tables, changin, etc.
FUNCTION y_test_fm.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(PARAM1) TYPE CHAR10
*"     REFERENCE(PARAM2) TYPE CHAR10
*"     REFERENCE(PARAM3) TYPE CHAR10
DATA: ep TYPE STANDARD TABLE OF rsexp ,
        ip TYPE STANDARD TABLE OF rsimp ,
        tp TYPE STANDARD TABLE OF rstbl ,
        el TYPE STANDARD TABLE OF rsexc ,
        vals TYPE tihttpnvp ,
        wa_vals TYPE ihttpnvp ,
        wa_ip TYPE rsimp .
FIELD-SYMBOLS: <temp> TYPE ANY .
CALL FUNCTION 'FUNCTION_IMPORT_INTERFACE'
    EXPORTING
      funcname                 = 'Y_TEST_FM'
*   INACTIVE_VERSION         = ' '
*   WITH_ENHANCEMENTS        = 'X'
*   IGNORE_SWITCHES          = ' '
* IMPORTING
*   GLOBAL_FLAG              =
*   REMOTE_CALL              =
*   UPDATE_TASK              =
*   EXCEPTION_CLASSES        =
    TABLES
      exception_list           = el
      export_parameter         = ep
      import_parameter         = ip
*   CHANGING_PARAMETER       =
      tables_parameter         = tp
*   P_DOCU                   =
*   ENHA_EXP_PARAMETER       =
*   ENHA_IMP_PARAMETER       =
*   ENHA_CHA_PARAMETER       =
*   ENHA_TBL_PARAMETER       =
*   ENHA_DOCU                =
   EXCEPTIONS
     error_message            = 1
     function_not_found       = 2
     invalid_name             = 3
     OTHERS                   = 4
IF sy-subrc = 0.
    LOOP AT ip INTO wa_ip .
      MOVE: wa_ip-parameter TO wa_vals-name .
      ASSIGN (wa_vals-name) TO <temp> .
      IF <temp> IS ASSIGNED .
        wa_vals-value = <temp> .
      ENDIF .
      APPEND wa_vals TO vals .
    ENDLOOP .
ENDIF.
ENDFUNCTION.

Can we open and close Posting period for HR module

Dear All ,
Can someone please tell me is there any option available to open and close Posting period for HR Module.We have In Finance and MM.
Cheers
Balaji Dhanavel

check
the report RPCIPE00 useing SE38
can u be some wht clear of ur query once

Actual vs target report for sd module

if any having actual vs target report for sd module pls forward me..
my requirement is i would like to find the monthwise core and monthwise actual sales totals and rebate for the particular product ..

How are you doing the data entry for target (or budget) ? Is it thru CO module ? Have you activated CO-PA ?

What are the input parameters for Function Module

Dear Experts,
I want to generate a Sales Tax returns report,those fields are not available in my existing Datasources.
For that i want to write a Generic Datasource with Function Module.
audat
bukrs
vkorg
vtweg
spart
aurat
auart
netwr
mwsbp
kschl zedp(consition type)
kschl zvat(condition type)
ksch zcst(condition type)
matkl material group
Here what are the Input parameters for Function Module.
Thanks in Advance.
Srinivasan.

Srinivasan-
For creating a Generic extractor based on a FM, you first of all need to know what is going to be your structure.. i.e. what all fields you need to pull from what all tables. A functional consultant may help you identify the exact DB tables.
Once you know them, hand over the requirement and the pdf mentioned by Krishna to the ABAP guy, he would be able to take this up further.
Also decide 1st whether you would be using a full load or delta. There is a slight difference in the way they are built.
Let me know how it goes.
-Bhushan.

Formal error: Invalid calling sequence for function modules

Hi All,
I have developed a function module for FQEVENT 620 Payment: Transfer Line Items for Clearing.
The clearing works fine.
After clearing the open items i need to post an FI-CA Document(BAPI : BAPI_CTRACDOCUMENT_CREATE) for each open item(cleared item)
I have used the bapi : BAPI_CTRACDOCUMENT_CREATE in the same function module that i have developed for FQEVENT 620 Payment: Transfer Line Items for Clearing.Here i am getting an error "Formal error: Invalid calling sequence for function modules".
So please let me know where i can use this bapi to post fi-ca document.Is there a BAdi or Enhancement Spot where i can use this BAPI or tell me what should i do to overcome this error.
Regards
Venkat

Venkat:
While I am confused about your business process - creating an open item when clearing one seems strange. Look into event 0020 which is called after documents are posted - it may present the opportunity to post process additional documents.
regards,
bill.

Help regarding attaching smartform to a report program for QM module

Hii,
I have developed a certifiacate of analysis smartform for QM module and i attached it to a output type ...but i need to attach this smartform to a standard report RQCAAP01. can anyone help me what customizations i should do in report program in order to attach smartform.
Regards,
Venkat Akella.

I attached smartform in NACE to LQCB output type but i should also make changes in report program RQCAAP01..can u please let me know what customizations i should do in tht report program to attach the smartform..

Standard And Customized BEx Reports & workbooks for the Modules FI,SD,MM

Hi..All
Can any one explain about Standard and customized BEx Reports and workbooks which were frequently used in implementation projects for the modules SD,MM and FI?
Thanks & Regards
Jonn

Hi John,
Find below some of FI(AP) queries....
1.Accounts Receivable: Payment History -0FIAR_C05_Q0001
2.Accounts Receivable: Overdue Analysis -0FIAR_C03_Q0005
3.Accounts Receivable: Days Agreed / Days Taken -0FIAR_C03_Q0001
you can find some queries in help.sap.com
I don;t remember the queries used for other modules...you can refer the below link and identify the queries most usefull for your requirements...
help.sap.com/bw
thanks,
vachan

RFC Lookup error :No RFC authorization for function module

Hi All,
I have created RFC in the PI system and enabled it as remote. I am working on PI7.1
I have imported RFC into Repository.But when i am trying to execute RFC lookup function in the graphical mapping I am getting No RFC authorization for function module error.
Unhandled RFC exception: <rfc:Z_MAIL_LOOKUP.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>No RFC authorization for function module Z_MAIL_LOOKUP.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>RFC_NO_AUTHORITY</V1></Attributes></rfc:Z_MAIL_LOOKUP.Exception> com.sap.aii.mapping.api.StreamTransformationException: Unhandled RFC exception: <rfc:Z_MAIL_LOOKUP.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>No RFC authorization for function module Z_MAIL_LOOKUP.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>RFC_NO_AUTHORITY</V1></Attributes></rfc:Z_MAIL_LOOKUP.Exception> at com.sap.aii.mappingtool.flib7.RfcLookup.cacheMore(RfcLookup.java:95) at com.sap.aii.mappingtool.tf7.rt.AMultiResIterator$MultiOutIterator.gotoNextContext(AMultiResIterator.java:95) at com.sap.aii.mappingtool.tf7.AMappingProgram.processNode(AMappingProgram.java:315) at com.sap.aii.mappingtool.tf7.AMappingProgram.processNode(AMappingProgram.java:406) at com.sap.aii.mappingtool.tf7.AMappingProgram.start(AMappingProgram.java:496) at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:133) at com.sap.aii.mappingtool.tf7.AMappingProgram.transform(AMappingProgram.java:626) at com.sap.aii.ibrep.server.mapping.exec.ExecuteXiMappingCommand.transformInternal(ExecuteXiMappingCommand.java:197) at com.sap.aii.ibrep.server.mapping.exec.ExecuteXiMappingCommand.execute(ExecuteXiMappingCommand.java:94) at com.sap.aii.ib.server.mapping.exec.CommandManager.execute(CommandManager.java:43) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:40) at com.sap.aii.ibrep.server.mapping.MapServiceBean.execute(MapServiceBean.java:40) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1005_10002.execute(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.rmi_p4.P4DynamicSkeleton.dispatch(P4DynamicSkeleton.java:234) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351) at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62) at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37) at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53) at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304) Runtime exception when processing target-field mapping /ns0:MT_FileDummy/File; root message: Unhandled RFC exception: <rfc:Z_MAIL_LOOKUP.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>No RFC authorization for function module Z_MAIL_LOOKUP.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>RFC_NO_AUTHORITY</V1></Attributes></rfc:Z_MAIL_LOOKUP.Exception>
13:42:37 End of test
Edited by: Rams on Apr 17, 2009 1:43 PM

Hi! Rams,
I think the issue is related to Authentification Issue..Even though u did correctly please check once the below
1) Check any Typo Erros are there while configuring or giving names in Lookups.
2) please check Authorizations like ID and PWD and Sufficient Roles
3) Also please check did u given paramters correctly while doing RFC look up I mean paramers , Binding parameters and RFC channel name and adapter type or Simple type it must be an adapter
4) In ID part while configuring Interface determinaition you need to give your RFC look Up name there also..Hence check whether u given or not if yes correctly or not
5) Also remember one thing if your scenario is correct mostly you can know the result in mapping itself it seems while testing Message mapping and Interface mappings give your RFC look up paramters in the parameters tab present in TEST tab and later in Document tab give Input...and execute it works if it doesn;t works and if there is an issue with RFC you can get there only..ok
Also go through the below document::
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20befc9a-aa72-2b10-ae9b-b0988791d457]
I hope this will give u brief idea...
Also check with basis while taking SAP_ALL authorization so that first u ill came to know whether issue is related to authentification or RFC module itself remote enabled and also do SXI_CACHE also ocne to refresh ESR and ID objects..
Regards::
Amar Srinivas Eli

Data Conversion for Project Module

Dear all,
I have a requirement to perform data conversion for Project module from 11.5 to R12. I am new to this module. Can anybody can outline (or provide documentation reference):
1)Source tables in 11.5
2)Data Selection for source tables in 11.5
3)Validations need to be performed for data clean up
4)Interface tables and interface programs in R12
Thanks,
Sudip

See the following links for information on all R12 interfaces
Oracle Integration Repository Documentation Resources Release 12 (Doc ID 396116.1)
Note: 462586.1 - Where are the Oracle® Release 12 (R12) API Reference Guide?
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=462586.1
Note: 458225.1 - Release 12 Integration Repository
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=458225.1
If you are on 11i, go to irep.oracle.com
Hope this helps,
Sandeep Gandhi

FM for getting the Parent materials for the component material

Hi All,
I need to to get a list of parent materials for a given component material and that too upto 10 levels.
i.e.
Ist Iteration
The material M1 is a component in 3 other materials.
2nd iteration
The above 3 materials will be a components of 3 other materials each i.e. now a total of 9 materials are there.
3rd iteration
The above 9 materials will be a component of 3 other materials each i.e. now a total of 27 materials are there.
upto 10 iterations.
Is there any FM which can provide me the list of parent and superparents for a given component material..upto 10 levels (or something closer if these levels exists).
Regards
Abhishek

Hi,
Check this link..Getting the Parent Material (BOM)

FND_PRODUCT_INSTALLATIONS TEMPORARY_TABLESPACE IS NULL FOR CUSTOM MODULE

We have 11.5.10 ERP system for production use. But FND_PRODUCT_INSTALLATIONS TEMPORARY_TABLESPACE IS NULL FOR CUSTOM MODULE. All seeded modules are using TEMP.
What are the ramifications for this.
We have 'Change control' process in place. We can not update the table on fly. We need proper justification.
Please help me understand, how this table drives Oracle applications and its performance.
Thanks you all. in advance.
Gopala Medapuram

I agree with Hussein - we have several custom schemas that are registered in FND_PRODUCT_INSTALLATIONS, some of which have the tablespace info correctly filled out while others do not. All of our customizations in all these custom schemas are working as expected. So if your customizations are working as expected, I would not worry too much about it.
HTH
Srini

User exits for FI module in ECC 5.0 Version

Hello,
Can someone help me on this..i need to find a userexit in ECC 5.0 and this is in FI module(please provide me the steps to find as well). I need to do some validations and the exit should trigger at the end of document creation and just before the user clicks save button..Its urgent so i would appreciate a quick reply from anyone who knows about this.
Thanks,
Mohsin

Hi Mohsin,
Welcome to SDN.
You can create new custom program in your ECC 5.0 (Developmen Instance) by cut and paste the following sample program. This program will allow you to find user exist based on transaction code i.e FB50.
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Hope this will help.
Regards,
Ferry Lianto

Materials for HR Module

Similar Messages

Maybe you are looking for