Materials for PP/DS in chemical or pharma industries

Hi Are there any useful implementation guides and more materials for PP/DS that focus on the chemical or pharma industries ?
I know that they are more complex than the rest. What are the typical challenges and things that we need to look out for based on your experiences ?
Thanks in advance for your help !
Regards,
Ranjini.

Hi Ranjini,
Please check the following
http://help.sap.com/bp_chem603/CHEM_US/HTML/index.htm
http://help.sap.com/bp_pharmav1600/Pharma_US/index.htm

Similar Messages

FM for getting the Parent materials for the component material

Hi All,
I need to to get a list of parent materials for a given component material and that too upto 10 levels.
i.e.
Ist Iteration
The material M1 is a component in 3 other materials.
2nd iteration
The above 3 materials will be a components of 3 other materials each i.e. now a total of 9 materials are there.
3rd iteration
The above 9 materials will be a component of 3 other materials each i.e. now a total of 27 materials are there.
upto 10 iterations.
Is there any FM which can provide me the list of parent and superparents for a given component material..upto 10 levels (or something closer if these levels exists).
Regards
Abhishek

Hi,
Check this link..Getting the Parent Material (BOM)

Some thoughts on the dearth of training materials for the new MCSE certifications

Mostly this is venting... while it would be nice to see some remediation, I have no such expectations.
Given that Windows Server 2012 was GA 15 months ago, I'm severely disappointed at the lack of published training guides targeted to the MCSA and MCSE certifications (most notably the 70-413 and 70-414), and specifically with respect to the objectives involving
System Center that are included in those examinations.
I used the Exam Ref by Steve Suehring, and frankly was quite disappointed, although I'm not sure whether to blame the book, or the question pool on the exam. What I did observe was that a significant percentage of the concepts discussed in the Exam Ref book,
and ostensibly in the objectives for the exam, were not actually touched at all by the exam. More significantly, I encountered concepts on the exam that were not even mentioned in the Exam Ref. Presumably the Training Guide (700 pages) will go into much more
detail (e.g. the exam I encountered seemed very heavy with respect to Active Directory Site design), but it won't be available until April (at the earliest).
Further, there's nothing available in the realm of preparation materials for the 70-414. The Exam Ref was supposed to be available in September 2013. (The O'Reilly site says March 2014, but the MS Exam Page is not yet updated.) Who knows when it
will really be available, and I don't even see a mention of an actual Training Guide for this exam.
Adding insult to injury, I bought into the special last spring to take the -417, -413, and -414 (which expires tomorrow), and have been unsuccessful at passing the -413 (due to the poor prep materials) and didn't even consider the -414 (due to the non-existent
prep materials). Frankly, I feel very ripped off -- (And if the actual questions on the -413 compared to the Exam Ref are any guide, I'm not particularly encouraged by the eventual availability of the -414 Exam Ref.)
I do see where there's still a discount package available (including 2nd shots) for the MCSE: Server Infrastructure ($255 for both exams plus 2nd shots), available until May 31, 2014-- and expire on December 31, 2014. I think I'll wait until May and see
if [a] the -413 Training Guide gets published and [b] what the "master plan" will be for training for the -414.
Btw.. it seems the prospects are no better for the MCSE: Private Cloud exams either.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

For post-production and audio work, having a quieter computer is one of the reasons I ordered a Mac Pro - quieter is good. And as my MDD dual 867Mhz is now as long in the tooth as I am, it couldn't come at a better time. I was really contemplating buying a quad G5 the past 6 months, but then heard the professional desktop would come out during the developer's conference, and I'm glad I waited. The price is absolutely - and insanely - great. Mine should be here on the 15th, and I'll be counting the hours. As for the risers, I'm willing to endure a few nanoseconds as a trade-off.
Regards,
Rube
G4 867x2 2Gb Mac OS X (10.4.7)

Anybody know where I can find tutorials and training materials for Adobe Output Designer

Hi everybody,
I am a graphic / web designer and newly appointed on a project requiring Adobe Output Designer skills. Now, I've already searched in a lot of places: but still couldn't find a reliable source of tutorials and training materials for Adobe Output Designer.
Can anybody help?
thanks a lot in advance,
ovlique

The DJI cameras were first supported in ACR 8.3 and more support added in ACR 8.4:
Lens profile support | Lightroom 5, 4, 3 | Photoshop CS6, CS5 | Camera Raw 8, 7, 6
You will need PS-CS6 or PS-CC or PSE12 with current updates on OSX 10.7.x or Windows 7+ to use this version of ACR.
However, even if you have an older version of PS or older OS, if you can install the Adobe DNG Converter, you can copy these lens profiles to the User's lens profile folder and they might be seen. I can give more specific instructions about doing this if you are unable to update PS's ACR to 8.3/8.4.

Where can I buy study materials for SAP BANKING

Hi, Experts:
I have plan to get certificate for SAP Banking. And I am looking for some study materials if any body know where can I buy these documents. Please provide me the detail informations. FS040FS260FS212FS001
Thank you very much

See if this helps:-
http://social.technet.microsoft.com/Forums/en-US/cd96c03f-8e79-409b-9cba-153f0247d8fc/question-about-learning-materials-for-the-74697-exam?forum=CertGeneral

Materials for Single wbs Element from project/Plant stock

Hi to all,
I would like to have the following scenarios for the single Project.
1) Some Activities in the single WBS Element will be using the Materials for specific to the Project. So MRP will be generated for the Project and PR,PO,Goods receipt will be done.
2) In the same WBS Element of some activity, wants to consume materials from the Plant stock. For this we donu2019t want to run MRP. From the reservation no, we want to take the materials for project use.
I have a single Network profile and I donu2019t want to create anymore.
Understand from movement type 411, we can take the materials from unrestricted Plant stock to project. Is there any other way/any config I need to check in account assignment category to fulfill the requirement to consume from Plant stock and also to use Project stock in a single profile.
Regards
N.Raju

Hi,
that is the only option, Std. SAP does not support for unrestricted plant stock ( for Project MRP or availability check).
same option-
1) transfer free stock( plant stock) to respective WBSE
2) Run MRP
3) Consume material.
Venkatesh

How to Maintain Default materials for clearing house fee (IS Oil) O3RECH1

Hi,
I am an ABAPer. I have come accross one issue in Transaction O3RECH1 (Create CH Settlement/ Transmission).
I am getting error. as No Material Exist. .. In debugging i came to know that material is empty since there is no data in field FEEMATNR of table OIRECH_APPL.
Table OIRECH_APPL --> SSR PC: Clearing House application data (IS-Oil SSR).
In that there is one filed FEEMATNR --> SSR PC: Default materials for clearing house fee.
Can any one please let me know How to maintain it.
Answer will be rewarded.

Interesting requirement. This can be achieved through Search String as suggested by Mr. Shanid.
Try to find a text in the note to payee line for bank charges for creating a search string.
For Example. See below note to payee line and assume this line for bank charges.
16,455,130155,0,5/3 BANKCARD SYS CH,,5/3 BANKCARD SYS CHARGBACKS.
Identify a text which should always come with this line for every EBS file for bank charges. Assume here "BANKCARD".
Now go to T-code OTPM.
Click on create
Srch strg name: Bank Charges
Description: Bank Charges
Search String: BANKCARD ( Based on this text system will search your not to payee line)
Once you press enter, you will get mapping details on the left side with target field "BANKCARD". Now remove the BANKCARD from target field and put there cost center which you will post for one house bank. Save the data.
Now move to second step.
Click on Search String Use.
Put your company code,
House bank(mandatroy in your case).
Interpretation Algorithm( same as you maintained in OT83 for posting rule with external transaction type).
Search String: BANKCARD.
Target Field: Cost Center.
Save.
Sorry I am not getting option to attach screenshot in SCN now. Dont know why.
Let us know if you have any doubts.
Hi Mr. Shanid,
Correct me if I am wrong.
Regards,
Mohammed

How to determine Component materials for PO line item Materials.

Hello friends,
I woluld like to know the table name for getting the component Materials of a Purchase Order line item material.
There is a table called RESB, which is containing the component materials for the PO line item materials. But this table is populating only after creating (saving) the PO.
But, i have to do some validations on component materials, before saving the PO. For that i would like to know the table, from which the component materials will pick.
Or
Please provide some user exit names, which will contain Component materials, during the PO creation.
Thanks in Advance.

hi
header BOM table - STKO ( u need to fetch BOM# from here)
Item table - STPO ( pass the BOM # here and retreive all the item details)
try using FM
CS_BOM_EXPL_MAT_V2
regards
kunal

Need Basic Materials for Value Mapping Function

Hi all,
Can any one provide Basic Materials for Value Mapping Function???

Hi Ragu,
u can chk out this :
http://help.sap.com/saphelp_nw70/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/frameset.htm
Hope ths was helpful.
kanan

How to Upload the Materials for one Plant and then copy the same to all oth

Hi All,
I am using Material Types NonStock, Service, Spare Parts and Trading.
How to Upload the Materials for one Plant and then copy the same to all other plants.
can anybody give response for this requirement.
Regards...
<b></b>

Hi,
Using MM01 Only we can upload Plant Details.
If you want to extend to other plant also, Use MM01 and select Plant view and give new plant details.
If you want to copy from one plant to another plant after selecting Plant view , next screen you can select From Plant and To Plant Details.
Reward Points If it helps you.
Regards,
Murali K

In house mfgd. raw materials for a production order- Cost capturing

Hello Experts,
The scenario is as below:
Client wants to manufacture in house some of the raw materials for a production order of sub assembly. These raw materials are made from scrap, with some manhours spent on it. After making them in house, these are handed over to stores for kit preparation.
The planner wants to create a stock of these materials (without making individual prod. orders since there are many of these). One option is, planner can do the cost centre issue reversal (202 movement). But the raw material cost is also getting captured in it from the material master.
From costing point of view, the cost of raw material should not be included since it is made from scrap. Only the cost of man hours spent is to be accounted for.
Please help as to how to map this scenario. For capturing cost of man hours spent, we can include a routing for it in the production order of the sub assembly. But how to eliminate or exclude the material cost. All inputs from your side are appreciated. Thanks in advance
Regards,
Chetan.

Hi Chetan,
Your scenario has some major issue.
1. You cannot produce RAW material in SAP.
2. The cost of material produced inhouse will be different than that of original RAW material.
3. There will be some cost effect in the final finished product if you consider this inhouse produced material for product costing of finished goods.
We have similar scenario with my client and here is what I have implemented.
1. Create a new HALB type part number for the inhouse manufactured RAW material. This will ensure that you assign Routing and BOM to same and can capture the COST for the same.
2. Creating new material will enure that the product costing for inhouse produced RAW material is done.
3. You can create single Production order for the same as you only have to capture cost. This depends on your Business scenario.
4. Once you have inhouse produced raw material, you can create alternate BOM for the FINISHED Material with this new Part number in BOM.
5. Create Production Version for the two BOM and ask Planner to select the Version 2 if he requires new part number in Production Order. I assume that this case would genrally appear in very small numbers.
6. Now coming to product costing for final assembly. Since we are going to reuse scrap material to create the new part number, only activity cost and component cost will be used to determine cost. This cost will be less than that of RAW material cost.
So we always suggest our customer to consider OLD part number to determine the PRODUCT COST of final material. BUT business will have to take a call on this.
Do let me know if u need any thing else.

Raw Materials for a production order

Hi,
i am using sap b1 8.81 pl06. i have a Production order or a sales order with some finished product item. i need to know how much we have to prepare as raw materials for this specific PO or SO. is there any report that can give me these infomation. note that my finshed product are composed from semi-finished product as well.
thanks

hi all,
thanks for your support, i found similar query in some sample queries by SAP. with some edition i managed to get what i need. here is the code maybe someone will find it helpful.
SELECT T0.[Father] as 'Assembly',
t16.[quantity] as 'BuildQty', t16.[quantity]*t20.[LastPurPrc] as 'Total Price',
T0.[code] as 'Component1', t10.[ItemName] 'Description1', T0.[Quantity] as 'Quantity1',
t16.[quantity] * t0.[Quantity] as 'ExtQty1',
t10.OnHand as 'OnHand1',
case when t10.OnHand - (t16.[quantity] * t0.[Quantity]) > 0 then 0 else
-(t10.OnHand - (t16.[quantity] * t0.[Quantity])) end as 'Shortage1',
T1.[Code] as 'Component2', t11.[ItemName] 'Description2', T1.[Quantity] as 'Quantity2',
t16.[quantity] * t0.[Quantity] * t1.[Quantity] as 'ExtQty2',
t11.OnHand as 'OnHand2',
case when t11.OnHand - (t16.[quantity] * t0.[Quantity] * t1.[Quantity]) > 0 then 0 else
-(t11.OnHand - (t16.[quantity] * t0.[Quantity] * t1.[Quantity])) end as 'Shortage2',
T2.[Code] as 'Component3', t12.[ItemName] 'Description3', T2.[Quantity] as 'Quantity3',
t16.[quantity] * t0.[Quantity] * t1.[Quantity] * t2.[Quantity] as 'ExtQty3',
t12.OnHand as 'OnHand3',
case when t12.OnHand - (t16.[quantity] * t0.[Quantity] * t1.[Quantity] * t2.[Quantity]) > 0 then 0 else
-(t12.OnHand - (t16.[quantity] * t0.[Quantity] * t1.[Quantity] * t2.[Quantity])) end as 'Shortage3'
FROM ITT1 T0 LEFT OUTER JOIN ITT1 T1 on T0.Code = T1.Father
LEFT OUTER JOIN ITT1 T2 on T1.Code = T2.Father
LEFT OUTER JOIN ITT1 T3 on T2.Code = T3.Father
LEFT OUTER JOIN ITT1 T4 on T3.Code = T4.Father
LEFT OUTER JOIN ITT1 T5 on T4.Code = T5.Father
LEFT OUTER JOIN ITT1 T6 on T5.Code = T6.Father
left outer join oitm t20 on t0.father = t20.itemcode
left outer join oitm t10 on t0.code = t10.itemcode
left outer join oitm t11 on t1.code = t11.itemcode
left outer join oitm t12 on t2.code = t12.itemcode
left outer join oitm t13 on t3.code = t13.itemcode
left outer join oitm t14 on t4.code = t14.itemcode
left outer join oitm t15 on t5.code = t15.itemcode
left outer join rdr1 t16 on t0.father = t16.itemcode
left outer join ordr t17 on t16.docentry = t17.docentry
WHERE T17.docnum = '[%1]'
order by t0.father

Lightroom 5 prep materials for ACE exam?

Hey everyone - can anyone point me towards any good prep materials before I sit the Lightroom 5 ACE exam. I've used LR since the first beta so consider myself fairly proficient, but I know there will be nooks and crannies I don't use myself much which I'll need to learn or refresh myself on...
Joe Houghton
Dublin, Ireland

user11330275 wrote:
Thanks for this post. I thought the last time was May 25th. I hope they could release this one.Actually, I contacted them again this past week to ask if they would be releasing materials for 1Z0-146 anytime soon, since it is now June. I got the following response:
No unfortunately, we've decided to have our developer work on a couple more Oracle practice test products before writing the 1Z0-0146 Study Guide. We'll be releasing the Oracle 10g RAC and 11g Performance Tuning products in the next few months. When we get the study guide back on the project plan, we'll certainly let our customers know, so check back on our web site later this Summer.
So, it looks like it's been postponed indefinitely. They went from February to late March to May to June to indefinite. I won't hold my breath anymore.

Mm01 - open materials for a prefedined set of sales organization

I would like that it will be mandatory for my users to open materials for a predefined set of sales organization. Could I do it with customization activity?
Best regards.

Hi,
Ask your user to set the defaults for the transaction,
-->Open Transaction MM01, input Industry sector and material type,
Then hit on select views, default the required views, and check the box as follows,
Then input all the org levels and make it as defaults settings, also check the box for org level/profiles only on request
Thus whenever you enter the transaction MM01,then all the default setting will be popped, Please check
Thanks

SAP ECC.6. Materials for FI Required........

Hi All,
I need the materials SAP125 (SAP Navigation),
ERP001 (Management Empowered by mySAP ERP),
ERP020 (Mangagement Empowered by mySAP ERP Financials),
SM001 (SAP Solution Manager)
Your help is appreciated...
Thanks in advance
Keerthi

Hi Keerthi,
The registration of the exam is depends on your confidence.But once you register the exam you have to attend the exam.SAP do not accept unless it is very serious reason.
There is nothing like time will be given for preparation.If you go through the SAP, there are a few education centers world wide.You can check with your nearest center.The examination dates are fixed.
I don't know about the materials which you got from the web.SAP AG will keep on updating the materials for every version.
My advise is if you are very perfect in TFIN50,52 and e-learning materials then only register for the exam.Certification exam is not easy.
Best Regards,
Mohan.

Materials for PP/DS in chemical or pharma industries

Similar Messages

Maybe you are looking for