Materials Management

Hey,
I would like your help with the following questions.
1. Which table and which field do I need in order to see the time (in days) that passed from the moment I order goods until the goods were received.
2. Which table and which field do I need in order to see the dates that goods movement were performed for each material that is defined in the system.
Thanks.
Moderator message: Please use better subjects
Edited by: Jürgen L. on Jan 15, 2012 12:06 PM

Hi,
1. Which table and which field do I need in order to see the time (in days) that passed from the moment I order goods until the goods were received.
try following
Po creation date table EKKO
Delivery date in po Table EKPO
Goods receipt date table MKPF
2. Which table and which field do I need in order to see the dates that goods movement were performed for each material that is defined in the system.
table MKPF
Regards
Kailas Ugale

Similar Messages

  • Cubes on the Materials management Cube 0IC_C03

    HI,
    We need to create cubes on the Materials management Cube 0IC_C03 to take care of the huge inventory data we have . These will be a copy of 0IC_C03 and 0IC_C03 will be a staging layer.
    Want to know how will the marker update will work on the new cubes?
    Thanks.
    Nitin

    Hi,
    Look this link wll give u full detailes about marker updats and so on....
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    ***********Asign Points if usefull*******
    Cheers,
    Satya

  • Cubes on Materials management Cube 0IC_C03

    HI,
    We need to create  cubes on the Materials management Cube 0IC_C03 to take care of the huge inventory data we have . These will be a copy of 0IC_C03 and 0IC_C03 will be a staging layer.
    Want to know how will the marker update will work on the new cubes?
    Thanks.
    Nitin

    Hi,
    Dont enter duplicate trds pls close trd if u got solution
    Cheers,
    Satya

  • Acct determination for Materials management small differences with keys

    Dear all,
    While posting a document in MIRO, it throws error as 'Acct determination for Materials management small differences with keys not defined in ch/acts'.
    Please advise a solution to rectify this error.
    Regards,
    Vijay

    Hi,
    It seems due to small differences between debit and credit side you are not able to post the document price differences). Check all the data to create an entry first and  Check the data format. Can you check  in OBYC is there a way  to  have a transaction DIF (Materials management small differences) post to different GL accounts based on valaution class (plant)?

  • Defining Accounts for Materials Management

    Dear sir,
    Now, I have to Define Accounts for Materials Management, but I dont know what are procedure or group to match my account number. Can you explain the definition of following procedure:
    Expense/revenue from consign.mat.consum
    Expense/revenue from stock transfer
    Subsequent settlement of provisions
    Subsequent settlement of revenues
    Provision differences
    Inventory posting
    Change in stock account
    Inventory posting
    Revaluation of other consumables
    Del credere
    Materials management small differences
    Purchase account
    Purchase offsetting account
    Offsetting entry for inventory posting
    Account-assigned purchase order
    MM exchange rate rounding differences
    Differences (AVR Price)
    Cost (price) differences
    Price Differences (Mat. Ledger, AVR)
    Price differences (cost object hierarc.)
    Price Diff. from WIP Written Off (Mat.)
    Product cost collector price differences .....
    Many other, but you can explain some and give me example, and step by step giude me setup
    Thank you very much
    Faithfully,
    Hangvt

    Hi,
    Some of the companies are having a practice of paying payables with the rounding off rules. This rounding of in India could be from Rs.0.01 to Rs.10.00. For examble, there is a payable amount of Rs.125125.25 this can be rounded off to Rs.125125.00 or Rs.125130.00 while making payment. The balance amount should hit the rounding off difference account.
    The same things is applicable for receivables also.
    Over/under payment GL can be configured by using T Code OBXL
    There is an another use, for details see the below link,
    http://help.sap.com/saphelp_47x200/helpdata/en/01/a9b9a6455711d182b40000e829fbfe/frameset.htm
    There may be some more reason where you need to do this configuration,
    Disc. difference
    Incorrect cash discount rate
    To be paid without deduction
    Credit memo without backdated cash disct
    Cash discount period exceeded
    Reduction without doc.number allocation
    Incomplete payment advice note
    Payment amount is different
    Debit reduced not paid
    Debit reduced not paid
    Reduced twice
    Paid not reduced
    Damaged goods - disputed
    Goods damaged during transport
    Quant.delivered not same as order quant.
    Freight charges not paid
    Miscellaneous deductions
    Price variances - disputed
    Partial payment
    Returns
    Residual item creation
    Trade Promotion
    Payment differences on debit side
    Hope it clears your doubt.
    Regards
    A.Saravanan.

  • How to Post Customer Return in Materials Management ?

    Dear Experts,
    I want to know the cycle of excisable customer return material.
    How the Goods receipt will be posted with excise duties and further processing in materials management.
    Also please mention the integration points with Sales and destribution.
    Thanks in Advance.

    Hi,
    The returns order can be created with reference to an invoice to ensure traceability of the process. It may be worthwhile ensuring this is mandatory when creating the returns order type. It may also be worthwhile ensuring the returns order reason was entered on the sales document. Thus, it may be necessary to add this in an incompletion procedure. You may want to copy the pricing from the invoice back into the sales order.
    Note: - There is no need to indicate a negative value in the copying control rules, as the system sees the document type as a return. It automatically posts the entries in the finance document as opposite entries on the ledger. By using the same pricing values, you ensure a reversal of the externally created invoice.
    It is advisable to have a billing block assigned to the return order to prevent a credit for returns being created until an authorized person releases the billing block. Go to Sales, Sales documents, Sales document header, Define sales document type in the billing block field in the billing section.
    Once the returns delivery is created, the material is receipted back into our plant. The material should use a goods movement back into stock that inspects the stock, such as blocked stock, before placing it back into available stock to be consumed by the next sales order that places a demand for the material in the plant.
    Tip: - It is advisable to indicate a shipping condition that is specifically used for returns. Thus, all return deliveries or goods receipts can be done by a specific shipping point. This is useful when running the delivery due list. You can select only to process the returns deliveries, as well as offer better visibility of stock movements.
    The standard item category used by returns is REN.
    Process Flow: -
    1. VA01 - Create Return Order (Order Type - RE) w.r.t. original Billing Document
    2. VL01N - Create Delivery w.r.t. Return Order (Here do Picking and Post Goods Receipt i.e. PGR)
    3. VF01 - Create Credit Memo w.r.t. Delivery Document
    4. J1IEX - Capture Excise Invoice --> Without Purchase order and enter all details like; Material, Vendor, Quantity, Assessable Value, Excise Duties like; BED, ECS and SECess, etc... manually and Post.

  • Rebate process in Materials Management

    Hi Experts,
    I want to know the rebate process in Materials Management.Can somebdy help me with this or provide if any documents available.
    We have a scenario that we have ana agreement with vendor that if we buy quantity of say 1000pcs in year he will provide us discount of 5%.
    Thanks
    Charudatta

    Hi
    The below link will help you
    http://help.sap.com/saphelp_46c/helpdata/en/fd/45c1089d6411d189b60000e829fbbd/frameset.htm
    Regards
    Antony

  • Configuration in Materials Management postings

    Dear All,
    I am going to configure the Automatic Posting procedure of Materials Management postings via transaction OBCY. Can I ask if I can provide same accout assignment in Inventory posting (BSX) and Cost (price) differences (PRD)?
    I have provide an account assignemnt 0001  - 6051(valuation class)  - 106051 (G/L Account) in Inventory posting (BSX), When I provide the same setting in Cost (price) differences (PRD), message "Account 106051 already used in transaction BSX" prompted.
    How to solve this issue?
    Many Thanks
    Sunny

    Hi,
    BSX key is for stock poasting for inventory with out account assignment ...................
    Were as PRD is the price differenec which gets activated when there price difference between PO and GRN ..........
    So it cannot have the same G/l accounts , assign a differnet G/l accounts for PRD .................
    If you got any doubts concern with your IF team , they can explain you much better how it will effected in balance sheets...........
    Hope this may help you............

  • Automatic posting from materials management

    We use transaction OMWB for determining the accounts for automatic posting from materials management.
    Is it possible to determine different accounts for small differences (DIF)  for different company codes that belong to the same chart of accounts??

    Hi
    yes this can be acheived via valuation modification class just chk with FI for further settings.
    Regards

  • Materials Management SAP Master Data Administrator Needed

    Hi all,
    I am an executive IT recruiter for the Lucas Group.  We are the largest privately owned recruiting firm in the nation and deal only in Permanent placement.  Please contact me at 972-201-1256 if you feel you would be a good fit for a Master Data Admin in Materials Management in the chicago area.  My client is looking to hire immedaitely and I could have an interview witin 2 days set-up. 
    Martin
    www.lucasgroup.com
    [email protected]

    SAP MDM is master data management server. as in our SAP R/3 Customer Master, Vendor Master, Material Master, Etc.  These Master Data we are maintained in conventional way means individual SAP R/3 and non-SAP itself.
    However, these Master Data can store in single point source of truth and then distribute to all after consolidating the master record data. First, we will get the all Master Data (ex. Customer, Material, Etc) from Different sources (ex. SAP or non-SAP or DB) using the scenario
    SAPR/3---> XI--> MDM (Outbound to SAP R/3 or Inbound to MDM)
    Second,
    Then we will do the all the necessary things in MDM.
    Third, we will syndicate/ distribute the consolidated Master Data to all the Systems using this scenario
    MDM-> XI-> SAPR/3 (Outbound to MDM or Inbound to SAP R/3)
    what is acheived out here is data uniqueness acorss the system. this is one real world scenario

  • Materials Management Document flow  table

    hi all,
    can any body tell me the Materials Management Document flow  table .
    thnaks

    Hi,
    T001L     Storage locations
    T024E     Purchasing organization
    T3001     Warehouse number
    TVST     Shipping point
    TVLA     Loading point
    TTDS     Transportation
    ADRC     Addresses (Business Address Services)
    Material master :
    MARA     Material master
    MAKT       Material text
    MARC     Material per plant / stock
    MVKE     Material master, sales data
    MARD     Storage location / stock
    MSKA     Sales order stock
    MSPR     Project stock
    MARM     Units of measure
    MEAN     International article number
    PGMI     Planning material
    PROP     Forecast parameters
    MAPR     Link MARC <=> PROP
    MBEW     Material valuation
    MVER     Material consumption
    MLGN     Material / Warehouse number
    MLGT     Material / Storage type
    MPRP     Forecast profiles
    MDTB     MRP table
    MDKP     Header data for MRP document
    MLAN     Tax data material master
    MTQSS     Material master view: QM
    Vendor
    LFA1     Vendor master
    LFB1     Vendor per company code
    LFB5     Vendor dunning data
    LFM1     Purchasing organisation data
    LFM2     Purchasing data
    LFBK     Bank details
    Purchasing
    EKKO     Purchase document
    EKPO     Purchase document (item level)
    EKPV     Shipping-Specific Data on Stock Tfr. for Purch. Doc. Item
    EKET     Delivery schedule
    VETVG     Delivery Due Index for Stock Transfer
    EKES     Order Acceptance/Fulfillment Confirmations
    EKKN     Account assignment in purchasing
    EKAN     Vendor address purchasing
    EKPA     Partner functions
    EIPO     Item export / import data
    EINA     Purchase info record (main data)
    EINE     Purchase info record (organisational data)
    EORD     Source list
    EBAN     Purchase requisition
    EBKN     Purchase Requisition Account Assignment
    Inventory Management
    MKPF     Header: Material Document
    MSEG     Document Segment: Material
    EKBE     History per Purchasing Document
    Invoice Verification
    RBKP     Document Header: Invoice Receipt
    RSEG     Document Item: Incoming Invoice
    BSIK     Accounting: Secondary Index for Vendors
    BSIS      Accounting: Secondary Index for G/L Accounts
    Services
    ESSR     Service Entry Sheet Header Data
    ESLL     Lines of Service Package
    Regards,
    Vengat

  • Companycode 9650 is not setup for materials management

    Hi all,
    i am loading  data from r/3 to CO cube 0copc_c10 from a custom defined datasource.I am getting error as "Companycode 9650 is not setup for materials management". i have checked in rsa/3.there also its throwing same error while displaying (but its showing 2056 records are selected).Dont know what to do.Any help?
    Regards,
    Murali.

    Hi Roberto,
    here is the message i see :
    No cost estimate found for material item 00016 in itemization
    Message no. CK 375
    Diagnosis
    The system could not find a cost estimate for material item 00016 in the itemization of material 1278.357.233 in plant 0800.
    It is possible that the cost estimate for this material has been deleted.
    Procedure
    You can display the costs for this material referenced to cost component view 01.
    The costs for material item 00016 correspond to the cost component view in the costing type in Customizing for Product Cost Controlling. If the costing type does not contain a cost component view, the system displays the costs for the cost components that are flagged as being relevant to stock valuation.
    And DATA SOURCE WAS BUILT ON FUNCTION MODULE(Custom defined).
    regards,
    Murali.

  • About thread in New to Materials Management / Warehouse Management?  in MM

    Hi forum experts,,
    in  New to Materials Management / Warehouse Management?  there is a thread on CIN  by Mohammad Arif
    INDIA business scenario / CIN
    I am not able to open the link.
    can anybody try why it is not opening or alternatively give the address of this site .
    Thanks and regards

    Use this link
    http://help.sap.com/bp_blv1500/BL_India/index.htm

  • Integration with Materials Management

    Hi,
    Can any one tell me how SRM is integrated with Materials management?
    Whether Eprocurement is the new functionality in latest release of SRM?
    What r the steps to be followed for configuring E-procurement?
    Plz through some answers for the above queries.
    Regards
    Pratap

    Creating Device Categories in IS-U  
    Procedure
    1. Choose Utilities industry >> Device management >> Technology >> Device category >> Create.
    You branch to the initial screen for creating device categories.
    2. Enter the required data and choose a basic device category to be allocated to the device category. Chose Continue.
    - If a material exists for the device category specified, you branch to the screen Create Device Category: General Data. Go to step 3.
    - If no material exists for the device category specified, the Create MM Material dialog box appears.
    Here you can create a material in MM in the background. Processing is then continued on the next screen for device category maintenance.
    3. Enter further data for the device category and if necessary add additional basic device categories. Save your data.
    You branch to the initial screen for creating device categories.
    Result
    The device category was created in IS-U. In addition, a material master was created in the background.
    If you want to use all of the MM functions available, you must extend the material master you created in IS-U in MM.

  • Catalog in materials Management

    Hi,
       I like to know about catalog maintenence in Materials management. Can you provide some inputs in this regards.
    Biswajit

    Hi,
    Normally we will create the material master in MM for all products assigned to catalogs.
    And then it will reoplicate to SRM form ECC and then we will create the catalogs in SRM.
    Basically Catelog maintenance will happened in SRM.We are maintaining materail master in ECC.

  • Issue of Materials Management staff entering double PO#, PR# for same Invoice

    Hi,
    Anyone had encountered the Materials Management Dept staff entering double PO numbers and PR numbers for the same invoice number?? The double PO and PR numbers are all different number but it causes double counting problem..
    Anyone encounter it and come up with any settings to the SAP to warn the data entry staff on any existing PO/PR numbers that already exists for the invoices of the same number? Or there is any settings that can be done to stop the data entry from entering two different PO/PR numbers for the same invoice number???
    Please kindly help. Thanks!!!
    Regards,
    Richard

    Hello PKW
    You are right about the default PO type for ME21N or ME21.
    But there is some hope with EXIT_RV54POCR_006 (Function Module)  via enhancement V54U0006. I am not sure if it helps  for PO type or for other header data only.
    Please go through the following OSS notes and those mentioned within:
    506605 - Info: PO generation when transferring shipment costs
    746691 - INFO: => LE-TRA-FC-SET => purchase order
    Let me know if it helped you.

Maybe you are looking for

  • CS2 Premium not working after re installing on Windows Vista

    I reformatted my computer and re installed CS2 Premium in a new laptop with Windows Vista; however, when trying to open one of the applications such as Photoshop it says "user name, organization, or serial number is missing or invalid." Adobe does no

  • Manually manage music and videos? Not if iTunes is involved.

    I don't do automatic syncing or music libraries, I run a recording studio and at the end of the day, I like to chuck a mix onto my phone and listen to it on the way home. Then when I get home, I might want to add some other stuff and compare it to th

  • Want to move all the sent, draft mails recieved on thunderbird to be sent to local folder automatically like global inbox

    want to move all the sent, draft mails recieved on thunderbird to be sent to local folder automatically like global inbox . I tried to use filters, send filter addon but they didn't worked for me, even tried changing the account setting for "copies a

  • Acrobat, reader, color, printing

    Hi. Using Acrobat 5.0, Reader 8.0, ID CS2, PS 7.0 I created a .psd file & put it into ID . IT is 300ppi CMYK. I have the same color settings in AI, ID & PS with a color settings file I saved as my own. I made a .ps file from ID. Then I Distilled it o

  • ABAP Lists - Font Size

    Is it possible to control the font size in ABAP classical list output, If so how can we handle it? Currently the print output of the ABAP list appears to be unreadable. Is the same possible with ALV reports as well?