MATERIALS MASTER DATA ERROR
HELLO SIR,
I AM GETTING AN ERROR WHILE CREATING MATERIAL MASTER DATA IN MM01.
IN BASIC DATA 1 THE BASE UNIT OF MEASURE IS SUPRESSED. I CANT ABLE TO ENTER THE OPTION.
SO FOR THAT I CANT ABLE MOVE FURTHER.
PLEASE KINDLY GIVE ME THE SOLUTIONS...
Hi,
Please check any documents created or the material or any transacctions.if any transaction is done over the material base unit of material can not be changed.reverse all the transactions happened over the material and try change.Or try to provide alternative unit of measure and its conversions in the UOM tab in the material master.
Regards,
Similar Messages
-
Materials Master data Improvement
Hi Guys,
I am starting a project in revamping out materials master data,as so many things went wrong e.g material descriptions, base unit of measure, issue unit of measure and so on in terms of our mater data.This mater data is affecting Finance and Purchasing.
I would like to know what is the best naming conventions can i use for our materials descriptions and what other things should i put into considerations for this project.Hi,
First classify the materials based on following criteria's
(a) Material Type (with Valuation Class)
(b) Material Group
(c) External Material Group and MPN (if required)
(d) Material description - Naming convention - "There are no Golden rules" - Based on your business needs you can decide the naming convention or you can initiate "Global Data Synchronization"
From SAP and Implementation point of view, internal number are very easy as well as from client maintenance (data preparation and Post Go-Live) angle.
SAP System provides lot of match codes ...I mean searching criteria based on multiple selection. Therefore, we shouldn't suggest and recommend external number range unless we get lot of merits from client business angle. Our approach should be System dependent rather than person dependent!!
Bye - Muralidhara -
Missing authorization check to display master data error..
Hi,
We are in SRM7.0.
After adding content in my shopping cart, I am trying to change the Account Assignment in the Item Details from Network to Cost Center or GL Account.
Under Item Overview, after changing the Account Assignment to Cost Center, I go to "Assign Number" to add a Cost center..On clicking the matchcode search box, I get selection entries like Cost Center, Controlling area etc..If I click on the Search box without keying anything, I get a "Missing authorization check to display master data error".
I get the same error, when I try to select Assets under Account Assignment area and use search under Assign number. I dont get any errors on searching networks.
Am we missing any authorization check in the backend ?
Regards,
Rajan.KHello Rajan,
You could use transaction ST01 in SRM to perform some 'authorisation' trace.
It might give you some pointers to the issue.
Regards,
Franz -
Payroll period does not correspond to master data error in INLK run & soln
Dear All,
Just wanted to share this Issue and solution which i found after debugging.
I am not sure it is 100% correct.
I am working on indian payroll and was doing lagacy data transfer with INLK schema
i was used to get error '2 payroll period does not correspond to master data'
and this was for only new joinees in that period .what i found out after debugging is
for e.g. employee is hired in 03.06.2011 .and record in t558b is
90300035 1 2011 1 2011 3 01.06.2011 31.06.2011
where 01.06.2011 is a for period begin date ,
now in payroll program this is being checked with joining date in following subroutine check_aper_versus_t558b
so it ends up with above error.now if i go and change 01.06.2011 to 03.06.2011 in T558B then payroll will be successful.
I dont no whether this is right approach but this removed that error.Just wanted to share so
It might help the members.la diferencia es la fecha del campo FPBEG que debe ser la fecha para los empleados que no esten con el año o periodo completo
the difference is the date field FPBEG Table T558B to be the date for employees who are not full with the year or period -
Vendor master data error - check issue manueal
Hi all,
i got the following message when i create vendor master data, same message as error when i try to post manual check.
" Changes for vendor 500011 not yet confirmed
Diagnosis
The change to sensitive fields of vendor 500011 have not been confirmed yet.
Procedure
You can confirm the change with transaction FK08."
could any one give me the solution ple
thanking youDear,
If the "sensitive field for dual control(vendor) " is defing in IMG under "preparations for creating vendor master data, then when you creating the vendor master data, the confirm is necessary. the responsible person could help you to confirm it via FK08.
With Best Regards,
Gladys Xing -
Delta loading master data errors in source system Message RSM340 quality
Hi,
I'm trying to load with delta master data for standard data sources.
In dev, everything seems fine.
I' ve transported the same elements to QA. I've done init, it is ok. I do delta, I get red status: Errors in source system, message no. RSM340. I've tried to put my delta on green, I've remade my init, I've reloading with delta, and I get the same problem.
I have this problem for all master data loading.
Should I install some infoobject from Bi Content?
Thanks a lot !Hi,
Check following threads
[3003 + R3299 + RSM340] error messages loading an ODS
Extraction failed with error Message no. RSM340
BW Data Loading - Delta Processes
Thanks and regards
Kiran -
Customer master data, Materials master data integration Integration in XI
Dear Experts,
I need your help in the following cases
We are integrating MDM 5.5 to ECC6.0 via XI 3.0.
1. I am not able to understand exactly what interfaces, mappings, integration scenarios from sap delivered MDM Business Content need to use for integrating customer master data , Materials from MDM 5.5 to ECC 6, As we are using standard content.
2. What idoc types needs to be created in ECC for these two scenarios ( customer, material /products).
3. Is there any way to see the field mappings easily in XI , as the MDM standard business content for XI used xslt mapping programs .
Could you please give helping hand with step by step procedure for customer, material integration in XI.
Help is rewarded and greatly appreciated.
Best Regards.
nag.Hello Nag,
1. I am not able to understand exactly what interfaces, mappings, integration scenarios from sap delivered MDM Business Content need to use for integrating customer master data , Materials from MDM 5.5 to ECC 6, As we are using standard content.
If you import Business Content of MDM 5.5. You should easily figure out that by looking at the Message Mapping for DEBMAS03 IDoc.
.2. What idoc types needs to be created in ECC for these two scenarios ( customer, material /products).
No need to create any Master IDocs in SAP system. You can find them with the name DEBMAS (For Customer) and MATMAS (Material).
3. Is there any way to see the field mappings easily in XI , as the MDM standard business content for XI used xslt mapping programs .
If you really want to know how the XSL Mapping is programmed. You can export the XSL from XI and open it in standard XML /XSL editor (say Stylus Studio ) to see how the output is programmed
Regards,
Ashwin M
Dont forget to mark helpful answers -
Master data error - when switching an attribute to navigable
Hi,
I have a serious problem on a master data. I have this master data that until yesterday did have not a problem.
Now, when I add an attribute not navigable (DIS), no problem. When I switch to DISPLAY and activate, following error occurs:
Error in activating the InfoObjects
Characteristic 0FS_CTR_NO: The attibutes SID table(s) could not be filled
Error in BW:
Error when activating InfoObject 0FS_CTR_NO
Characteristic 0FS_CTR_NO: Error when generating master data routines
Error when resetting InfoObject 0FS_CTR_NO to the active version
I tried to make this modification also directly in Quality without transport, and the error is the same.
Master data is empty, so I cannot understand why there is a problem with SIDS.
Any suggestions?
Thanks,
GianlucaHi,
as Raj said, when infoobject attribute is changed from dispaly attribute to navigational attribute there will be impact.
check this thread.
Link: [Error when activating 0MATERIAL after adding Navigation attribute]
Regards
Daya Sagar -
"Error reading crrdit master data " error in Contract management(CRM 2007)
Hi All,
In CRM 2007,whenever we navigate to contract management screen,error message come which is "Error reading credit master data "
Any suggestion on how to solve this issue.
Regrads
NikhilHi All,
This is resolved.
Just set the entry in the table CRMV_CREDIT_GEN to 'Do not Display credit master data '
Regards
Ankit -
hi
what is the solution,when master data is sent to cube
with out check marking ignore duplecate data records at infopackage level.
thanks in advance....
points will be assignedNo error while loadng the cube.
But when you are loading the master data object, you would get errors if there are duplicate entries. In that case check the box. -
Huge number of Master data errors
Hi All,
I have a situation. Actaully in our project data records with special characters for master data (0CUSTOMER here) are being edited every day and manually loaded. (note: no provision of RSKC). what happened a day back is unknowingly someone triggered a full load and data with error records from Day 1 is now there till the PSA along with the latest data. now untill and unless the data is corrected and reloaded new data won't get updated. So can anybody please suggest me the quickest way of getting out of this mess. I mean to remove the old data which is already there and get the latest data only from the PSA. Otherwise i need to manually correct around 7000 records!
Please help. Do tell me if you need more clarifications.
Thanks in advance!Hi
If it's possible speak to business poeple if they want that invalid characters.If they say yes then allow into BW on RSKC.
Just delete reuest and goto PSA and update datatarget immediatly.
Regards,
Chama. -
Master data error while loading data
Dear Masters
Im getting below error while loading delta update for master data(Attr) through infopackage to only PSA. Im in BI 7.0
When I checked Error message, Im getting 2 errors. They are
1) Update mode R is not supported by the extraction API
2) Error in source system.
I checked source system is fine. im getting data also in RSA3
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
Could you please help me to resolve this issue.Process chains might fail if the data source is not in sync between the source and the BW system. In such a case, go to the 'Source Systems' in transaction RSA1, find the datasource, right click and select 'Replicate Datasources'. Once this is done, the transfer structure needs to be activated as well. To do this in production, run the report RS_TRANSTRU_ACTIVATE_ALL with the source system name and the infosource name. This will activate the transfer structure.
NOTE: For master data using direct upload the infosource name is the name of the info object itself. -
0PLANT_ATTR Master Data error
Hi Experts
I have an issue loading 0PLANT_ATTR master data.
Some records in PSA are ok but the others give the error:
'No local currency found for plant 1601 and sales organization 1720'
I have made the correct steps when loading (a) Company code master data, b) Sales organization master, data, c) Plant master data).
I have check the 0SALESORG master data, and the currency 'BRL' for the sales organization '1720' exists in TCURR table - recently transfer gloabal settings/currecy again -.
I see this issue several times in the forum but not one give the solution!
Could somebody help me please?
Thank you in advance!!Hi,
Have you checked note 750322. Look at the 3rd point in it.
regards,
Murali. -
Regarding the Time dependent master data error
Hi Masters,
I've loaded the time dependent master data from flat file only two fields. When I checked that corresponding characteristics in maintain master data, that contains by default from date 01.01.2007and to date 31.12.9999 this date also. Could you please help me to rectify this error.
Thanks in advance
Raja.SHi Antonino La Vela
I have 2 Project Manger and in different duration for different project.
Following datas are my data in Excel sheet.
PM Name To date From Date Costcenter
Ragunath 01.09.2007 01.06.2006 Project name1
Ramana mani 01.02.2008 02.09.2007 Project name2
while loading above data, I'm getting following data in maintain master data
PM name To Date From Date Costcenter
31.12.9999 01.01.1000
Ragunath 31.05.2007 01.01.1000
Ragunath 01.09.2007 01.06.2007 Project Name1
Ragunath 31.12.9999 02.09.2007
Ramana mani 01.09.2007 01.01.1000
Raman mani 01.02.2008 02.09.2007 Project Name2
Raman mani 31.12.9999 02.02.2008
Could you please help me, how this unnecessary datas are loaded by default?
Thanks in Advance
Raja.S -
Loading master data : error invalid characters
Hello,
I load master data (example 0PROG_POS) into BW with InfoPackage and loading stops with error "invalid characters". In the logs, the error is due to a special character (in french Ä : a special A).
On BW side, is it possible to solve this problem (I don't understand the message in the help : "If this message appears during a data load, maintain the attribute in the PSA maintenance screens").
My BW is 3.5 patch 7
Thanks in advance for your help.
Daniel.HI Daniel
all characterstic & special characterstic
goto TCODE: RSKC -> all_capital-> F8
again : rskc-> !"%&'()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXY ->F8
GOTO SE11: RSALLOWEDCHAR (maintain special characterstic)
also u can goto-> SE37->RSKC_ALLOWED_CHAR_GET
-> F8
THANKS & BEST REGARDS
SANGRAM KESHARI SUTAR
Maybe you are looking for
-
ABAP short dump when posting to FICO
We are testing payroll on a upgraded version of our live system and recieving an abap error stating an issue with object "COSTS" . This is only occuring when trying to post the results to FICO and only for one particular employee. On searching we hav
-
In Hyperion Workspace 11.1.1.3 can you globally set user preference?
In Hyperion Workspace 11.1.1.3, is there a way to globally set the Hyperion Reporting User Point of View to 'on' for all users?
-
Resetting old iPad and stop syncronization between the old and the new one.
I have two iPads. They are synced. I want to remove some info from the old one and stop synchronization. How to do it?
-
Is there a version of firefox available for Windows 7
I have a new Dell laptop with Windows 7. I have used firefox for several years and am now finding that it does not work correctly using firefox. One problem: When replying to an email remotely, the original email complete disappears. Not so with Expl
-
How to handle a Model based on WSDL that is changed?
Hi, I'm creating a webdynpro application based on several webservices. I created a model based on the WSDL of the webservices (just like in the e-mail demo). Now the WSDL has changed, new services are added and others have changed. How can I adopt th