Materials should not go in quality inspection

SIR,
i wnat to configure in such a way that some materials should not go in Quality.
in my system there are materials for which quality views are also been created as well as lots are also asigned
ply help
regards
amey

Hi Amey,
So that you need to delete inspection type in QM view.
So after that whenever you do transaction,material will not go in quality.
Goto MM02--QM viewInsp.setupselect Inspection typeDelete(Shift+F2)--save.
If you want for certain material,then uncheck key Post to inspection stock.
Raja.
Edited by: Raja on May 18, 2009 11:38 AM

Similar Messages

  • Material is not going to quality inspection by default in PO

    Hi Experts,
    I have ticked post to inspection in material master QM view, dont want to genarate any lot .as per standard this should get copied in PO and while GR material should go to QI stock.But when we create PO it is showing unrestricted stock and while GR it goes to unrestricted.
    Manually i am able to change from unrestricted to QI while saving PO.But client want it should happen by default QI stock.
    Thanks.

    Hi Sankur,
    I just went through your remarks. What I have understood is, you want stock to get posted to quality inspection without inspection lot generation.
    The setting which you have mentioned is correct. Probably the reason why the setting is not getting copied into PO for stock type, is the change of settings after PO creation. I explain you what I tested. Letu2019s have a look on following sequence.
    1.     In material master Post to Inspection Stock tick is NOT activated.
    2.     No inspection type is activated
    3.     PO is created
    4.     PO is released
    5.     "Post to Inspection Stock" is NOW TICKED. (After PO creation but before GR)
    6.     Goods receipt through MIGO
    If you change material master, it would take effect from next purchase order.
    Regards,
    Anand Rao
    Edited by: Anand Rao on Apr 29, 2011 3:05 PM

  • Material rejected through quality inspection lot goes to blocked stock

    Dear All,
    All materials that are rejected through quality inspection lot should go to blocked stock. My client want to generate a report for viewing what all materials are rejected. How can do that?
    scenario2: If the materials are rejected then can they be automatically  be sent back to the vendor (return to vendor). if possible
    pl send me some suggestions...!!!
    pl discuss

    Hi,
    See  mvt of material directly to blocked stock u can do by setting the Selected Set of ur specific UD code. in QS51/QS52. there is one column near to code, set R=rejected and set that field "BloCked Stock" . Define there and execute ur transcation, whenever u provide an UD system automatically post the stock in blocked location.
    MCVX is the report where u can get the stock lying in blocked location, or for temp. purpose use QVI and developed the new report.
    regards

  • List of Material Lying in Quality Inspection

    Dear All,
    How we can get the list of Materials which are lying in Quality Inspection ?
    Regards,
    Manish Jain

    Hi,
    Check report MB52,  enter the database seelction as per your requirement , in Display option, select Non-Hierarchial Representation and execute
    else check QA33,  in list setting select "Select only inspection lots without a usage decision"
    Regards,
    Vikas

  • Avoid quality inspection

    Dears
    While making a PO my material was flaged for Quality inspection for 01 type
    Later i decided that no need of any inspection for that particular PO,so i change po under the delivery tab quality inspection to unrestricted use,But still when i made GR system post material in quality inspection
    there is any other methode is ther to avoid inspection for already creted po
    Pls give any idia
    AF

    Hi,
    If the material is activated with inspection type you cannot avoid generation of inspection lot.
    If you dont want to have inspection lot for this time means, reverse the GRN and de-activate the inspection type in material master.(Ensure that there is no stock in quality inspection)
    Now do the GR again, the material will not go to quality inspection. It will go to un-restricted use directly
    Regards
    Hari

  • Without QM module, for materials is in Quality, Miro should not happen

    Hi All
    without QM module,
    After GRN  the material is going to quality inspection.
    For such Purchase Orders, I want to restrict the invoice verification process.
    system should give error message.
    Regards
    M S K

    Hi,
    Through QM module you can block the invoice for payment but you can't stop the posting.
    Do the settings in SPRO > Quality Management > QM in logistics > QM in procurement > Define delivery block, here block invoice option is there.
    But in standard SAP, you can't control the Invoice posting through QM.

  • Unrestricted stock with Migo for quality-inspect materials

    Dear MM Gurus,
    We have a case, for some vendors(between cross company sales) we want to have the materials posted to the unrestricted stock.
    We have changes the stock type form quality inspect stock to unrestricted stock during purchase order creation with MM badi purchase_custom.Now it's ok and when go to migo, it seems also unrestricted stock.After saving the migo screen, checked the material document, it seems again quality inspect stock.
    What happens seems that, the system before saving checks the material master and sees the quality inspect type there selected.
    What we need here is to deactivate this during migo also.Could you please suggest us a userexit-badi to deactivate the quality data of the material so that the stock type is unrestricted.
    Thanx in advance
    Best regards
    Jack Black

    Hi,
    I suggest as per the scenario as if want to go for particular vendors with material combination for quality inspection and for other vendors with material combination for stock type unrestricted.
    I suggest not to go for any user exits.
    You have two options
    1. While creating purchase you can change the stock type in item detail in delivery tab pag e by selecting the desired stocktype for the vendor material combination. For this you need to uncheck the tick mark for quality inspecion for the material in the materila master record.
    2. You can tick the material subject to quality inspection in materila master as it is which willbe defaulted and appear as read only while craeting purchase order for all your vendors. After doing the goods reciept you can tranfer the stock from quality inspection to unrestricted with movement type 343.
    Regards,
    Tushar Patankar

  • Material not getting reversed after quality inspection

    Hi Friends,
    I want to reverse a material document for material which has been cleared in the quality inspection step. But I am unable to do so. Can you please let me know if there is any way we can reverse material which has been cleared from quality inspection.
    Regards,
    Wasim.

    Hi,
    Please apply the note 175842 by this you can reverse the Quality inspection & cancell the Material Doc.
    Regards,
    Manish Jain

  • Report on materials posted in Quality Inspection

    Good day!
    Is there an available report or list display for materials that were received and posted to quality inspection? Thanks!

    Hi
    You can use QE51 to know the list of inspection lot generated for the material received in Quality Inspection.
    Regards
    Prasad

  • 311 mvt should not genearte Inspection lot in production

    Hi,
    I have strange issue in QM:
    In quality When I am doing stock transfer with mvt 311, no Insp lots are getting generated, where as in Production When I am doing stock transfer with mvt 311, Insp lots are getting generated.
    I have checked Settings for MVT 311 ( Deactivate QM), Here in Quality as well as in Production for Mvt 311, QM deactivated check box is unchecked.
    I donu2019t know why inspection lots are getting generated in Production.
    Can you please help me in this regards.
    Thanks
    Utsav

    hi dear
    first of all against 311 it is the standard seeting, that when ever u go for a stcok transfer against this mvt type. inspection lot genrated with 08 type.
    in your dev server, if u checked in Quality Management--> Quality inspection-> Goods movement node--> Activate /Deactivate quality lot node and check for 311 mvt type, than u will find the Quality Not Active indicator . it is sure that particular that indicator in set. while on PRD it may not be there that's why u have a lot against ur posting.
    If that indicator is not set than lot will be their otherwise no lot. secondly if u activate 08 in your material master than during stcok transfer definitely a lot is there.
    so check it properly.
    regards

  • QA32: Without going in Inspection lot stock screen system should not allow for UD

    Hi
    At the time of UD "without going in Inspection lot stock screen system should not allow to save the UD".
    Please suggest how to restrict.
    Regards
    Ashish

    Please go through the below link & with small changes you can fulfill  your requirement using user profile
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/601c82e3-b743-2c10-dbb6-ed4c00167157?QuickLink=index&…

  • Quality Inspection not cominf for a material code

    Hi!
                  For a  particular material code,already there a quality view in material master.but it is not coming  for inspection in QA32.what i have to proceed further for bringing the material for quality inspection?
    -M.Suba

    Hi Suba,
    Try this.
    1.     Go to MM02
    2.     Put material code and press enter
    3.     Go to QM view
    4.     Click on Insp.setup. (It looks like solid rectangular tab)
    5.     Assign inspection type 01 if the material comes from vendor, else 04 for final inspection.
    6.     Ensure that you tick on u201CActiveu201D checkbox.
    7.     Save
    Do fresh GR. System will generate lot this time.
    Regards,
    Anand Rao

  • Materials in quality inspection issue

    a particularmaterial has been lying in quality inspection and i wanted to clear it from quality inspection using qa32 but its not allowing me maybe because the material is in a decimal place (12.006).......how do i go about it

    You cannot split a batch.....check batch number
    Message no. ZMSG445             ..........this is the error message and the message number

  • How to scrap specail stock in quality inspection...

    hi guys:
    I have a query, Is there any possible way to scrap the sale order stock in quality inspection without transferring it to the unrestricted stock and that also through inventory count(mi01,04,07),
    Actually we have damage lighting stock which is received against sale order(automatically transferred to quality inspection), and customers are replaced with new units, then this stock is called back in head office, for this we have a complicated process in use, first this stock is scraped from suppose "a" storage location after transferring it to unrestricted, then loaded back to "a", to make an STR for it from Head Office.
    So is there any way to scrap all special stock(complete storage location) against different sale orders at one go. whether the stock is available in unrestricted, quality inspection or blocked stock.
    I hope I am understood.
    Please help me to get through this complicated process.
    Regards
    Salar...

    Thx you guys are fantastic; I appreciate your help;
    below given is the post which has helped me, but there is some problem at the end, after the click of this point "11. (Click) in the gray box next to the session name and click . " there was nothing to proceed with, though I have posted the count through mi24 and post the difference with mi07, but still want to know what goes wrong with mi31, I have given the appropriate time for back ground processing....one thing to note there were 2 old inventory documents seen to be pending of the same storage location I was posting the count off, is this the reason of problem in processing of mi31,,,,,,please guide...
    Hi Buddy This transaction is used to create physical inventory documents for multiple materials in your plant and storage locations. Inventory documents may be created and printed prior to the count date; however, the posting block should not be set until the day of the actual physical inventory count. 1. From the SAP R/3 System screen, enter transaction code MI31. 2. Click or press Enter. The Selected Data for Phys. Inventory Docmts w/o Special Stock screen displays. 3. Enter or select a value for each of the following required fields: - Plant (enter plant code) - Storage location (do one storage location at a time) - Name of session Remove the checkmark from the Materials marked for deletion field will exclude items previously marked for deletion from the inventory document. The default session name is MB_MI01. Enter your initials and the session number after the default session name to identify it as your own. Example: MB_MI01_WW1 - Max. no. items/doc - use 99 for main storage location; - use 300 for truck storage locations. - Planned count date - enter date of inventory count - Physical inventory number - enter fiscal year followed by plant number and storage location. Example: 2004FY60118071. MI31 Create Physical Inventory Documents (in batch) - Set posting block - check if count is immediate; do not check if creating batch documents ahead of the inventory count date. - Sorting u2013 click on and select Plnt- Stor.bin description-Material. 4. Erase any variants under u201CDisplay optionsu201D. 5. Click . The Batch Input Created for the Creation of Phys. Inv. Docmts screen displays. Enter through any system information messages or errors. 6. Click . The Batch Input: Session Overview screen displays. 7. Click in the gray box next to the session name to highlight row. Click . The Process Session {Session name} dialog box displays. 8. Select the Background radio button. 9. Click . The following message displays: u201CX session(s) transferred to background processingu201D. It takes approximately 5 to 6 minutes for the system to process a batch session. Please wait at least 5 minutes before continuing with Step 10. 10. Click in the gray box next to the session name and click . The Batch Input: Log Overview screen displays. 11. Click in the gray box next to the session name and click . The Batch Input Log for Session {Session name} screen displays. If the batch processing is completed the last line in the Message column should read u201CBatch input processing endedu201D. If this message does not appear on the last line adequate time was not provided for the batch process to be viewed. SAP continues the batch processing in the background. Use transaction MI24 to retrieve a complete list of Physical Inventory Documents created. 11. Record the physical inventory document numbers created. You will need the document numbers to print the inventory documents. Clicking on can print this list. 12. View the log for any errors generated. A material master record being blocked for updates at the time of processing may cause errors. Add the material to a physical inventory document using transaction code MI02. Regrds Yogesh
    Thanks & Regards
    Salar...

  • In process quality inspection in operation of a process order

    Hi,
    PP-PI inprocess quality inspection at operation level
    I am creating a process order having two operation. the first is quality inspection (inprocess inspection) & last is related to consumption of some materials.
    The control key in operations are pi02,pi03(miles stone confirmation). i am using insp type 03 in material master 
    user needs  insp. happen first then consumption of material.
    my question is
    1.when operation first get triggered  quality lot generated i enter RR & do UD.but here i can not see the insp lot stock as subscreen. why? then how can i block defect qty in block stock?
    2.how can i consume material in the same quality operation? 
    With Regards,
    Kareena

    Hi Kareena,
    I think the thread is going in other direction. You were asking for some solution to mentioned the consumption.............
    That can be taken care..........
    For 03 - "In process inspection" lot as yield confirmation by activating the STD function of SAP as I have mentioned in my last post.
    For 04 - "Inspection against GR form Production" lot, by stock posting.
    For any lot you can do customization in "EXIT_SAPLQEEM_011", to post the material consumption at each MIC/Operation valuation.
    But now the entire scenario what you are asking is bit confusing.
    You wrote
    I think for process order,
    quality activity confirmation we are talking
    & for this i have not maintained inspection
    point or inspection point identification.
    i am doing RR from qe11.
    It seems you we are talking about 03 type inspection lot. that you can relate with the option I have mentioned in the beginning of this reply.
    in my inspection plan for the material
    i have maintained 5 different characterstics
    in that row i can not see the sampling
    procedure,base unit of measure,
    base quantity all these field are gray in color
    i have defined sampling procedure also
    i have not maintained inspection point identification.
    Where you have mentioned these 5MICs?
    If it is inspection plan, then it will go with 04 Type.
    If it is Master Recipe/Routing, then it will go with 03 Type.
    Now the other point you wrote the MIC Line item have the fields GREY for Sampling Procedure,&...........&.......So to activate them,
    Select the line item for MIC, click on the Control Indicator (Sampling Procedure) and then you will be able to assign the Sampling Procedure to MIC.
    The fields "Inspect" & "Inspected" are related with the "Insp. Scope" with the MIC. The scope is define at the Control indicators for the MICs (On Page2 for the Indicators). There are four Radio Buttons to define the Inspection Scope.
    Scope not Fixed
    If you set this indicator, the number of inspected units is defined by the user for results recording.
    This number does not have to agree with the precalculated number of inspected units.
    E.g. If the the sample size for that particular MIC is not fixed ever and you will supposed to enter it at the time of RR you should define this indicator and the field will open for entry in QE11.
    Fixed Scope
    If you set this indicator, the number of inspected units must correspond
    to the precalculated number of units to be inspected for results
    recording.
    The system can perform a valuation for the inspection characteristic based on the number of nonconforming units or the number of defects in the sample.
    And the field will be GREY, non - modifiable.
    Similarly the larger and smaller scopes work.
    Best Regards,
    Shyamal

Maybe you are looking for