Materials "Supplier Part number"
Hi all
Does anyone have any information on how to pull supplier part number into a designed material report?
I think I've looked everywhere & cant find the location of the field anywhere within material or supplier data sources
The field within Materials is located in
Materials
Purchasing
Supplier Part number
Thanks
Hi Scott,
for one material there can be many supplier part numbers, for each supplier a different one.
How would you expect the result to look like, in view of this 1:n relaitonship?
Regards
Michael
Similar Messages
-
Supplier and Supplier Part Number in standard report BBP_BW_SC3
Hi All,
There is requirement like to add new fileds ,Supplier and Supplier Part Number in standard report BBP_BW_SC3(copy to z version).
From which table i can get these values in SRM system.
Please suggest.
Thanks & regards,
RakeshHi Walter
Thank you so much for your reply, which indeed helped us to a great extent.
The solution works fine for my original example of A & B material. However, we want to find every combination of lower level material used in each rolled up material. In above example, if material B is used in C, and C used in D and D used in final product E.
The suggested functional module explodes the header material as per itu2019s BoM, and follows Top-down approach, whereas we are looking forward to find a link which shows Bottom-Up approach i.e. where-used approach. In above example, we want to start from lowest level material A, then B, and C till final product E.
Since the output of functional module has various fields so we are trying to find a field which helps up to establish the bottom-up approach for multilevel BoM materials.
Any inputs will be highly appreciated.
Thanks,
Nirav -
Supplier Part number not transferred to R/3
Hello
The supplier catalog when used for a purchase order is not bringing up the supplier part number. The Supplier Part Number not transferring to the back-end .
Can anybody help me please?
Best Regards.
JayawantHi
The field name is either MFRPN or what ? check whether the field is having any data, by holding a shopping cart by ITS and then doing the debugging in SRM GUI itself.
Is that field value is available on the SRM side, once the user is shopping from Catalog in ITS side. Please confirm the same by debuuging in ITS inside the
BBP_DOC_CHANGE_BADI ( inside The custom Implementation you have created in your system)
and incase its available, you need to pass the data coorectly by mapping / transfer the same by transferring it to R/3 by implementing the BADI - BBP_CREATE_PO_BACK.
Let me know your views as well.
Hope this will help.
Pls reward suitable points.
Regards
- Atul -
Add Supplier Part Number Special Request in SC
Hi Experts,
My req is that need to add Supllier part number (PARTNER_PROD) in SC for Special Request (Describe Requirement.)
This field is there when you select the Material from Catalog but If you go to special request (Describe Req) will not be there. This is not Custom field . The Partner number field is there in the I_ITEM structure-BBP_PD_SC_GETDETAIL.
Just I want add this field in special req and store into I_ITEM strucutre.
Can you anybody help me out this.....
Regards,
Kumar SHi
Which SRM version are you using ?
<u>We have handled these type of requirements in our earlier SRM implementations.
As Ramki told, OSS note 672960 and 485891 are for adding custom fields on the shopping cart item level.
Since this field is not visible in Describe requirement section of the shopping cart, you need to add a custom field as this will not involve any HTML templates modification.
Incase you don't want to add a custom field then you need to make modification to HTML templates and it might become quite complex to handle this in future.
Therefore, it's recommended that you should go with adding a custom field and map the data coming from catalog values to this custom field inside the BBP_DOC_CHANGE_BADI to suit your requirements.
Incase you need any help, in order to suit your requirements, do let me know.</u>
Hope this will help.
Regards
- Atul -
Power supply part number for Cisco 2900
I need to know what are the part numbers for installing the redundant (second) power supply.
Hi,
Have you tried sh inventory.
I am able to see with same command on some different platform
#sh inventory | inc Power|SN
NAME: "slot 24", DESCR: ***** AC Power Supply"
PID: 34-0820-01 rev B0 dev 0, VID: V01, SN: CAB014501HN
Regards
Mahesh -
Correct part number for G4 MDD power supply
I am in the process of replacing my old Power Mac G4/350 with a G4 MDD 1.0 ghz DP.
The power supply is missing from the MDD unit. Does anyone know what the correct
part number for this power supply?http://natramelec.com/g4powersupply/
Part Number: 661-2816, 661-2816-R, 661-2725
Manufacturer part: API1PC36
Apple assembly: 614-0224, 614-0183
Product EEE Code: NS3, P0V, P0W
http://www.welovemacs.com/6612816r.html -
Search contract by supplying vendor or manufacture part number
Hi,
We have a requirement to keep manufacturer vendor and manufacture part
number on purchase order.
Example:
Vendor (purchasing): 1000010
Vendors (Manufacturer): AAA, BBB
Internal Material number: 71000010
Manufacturer part number: 61000001 (AAA), 61000002(BBB)
two contracts for 1000010, one with supplying vendor AAA, the other is
with BBB.
However, when trying to create a PO(ME21N), contracts can not be
searched by supplying vendors. If search by internal material number,
both contracts show up and user can't tell the difference because they
don't show manufacturer part number or supplying vendor. Pls advice.
Thanks!You can search your caontract by internal number and than in the document overview you can change the layout which can show the MPN mateiral number
so based on the MPN material use rcan select the appropriate contract
send me your mail to this forum and i will send you the scrren shot -
Portege R600-13Z: Need screen part number - UK suppliers?
Portege R600-13Z
Need to buy a new screen - UK Suppliers or a Part Number needed?
Many ThanksHi
I dont know the part number but as far as I know you need a *12.1 WXGA (1280x800) matte widescreen* .
Usually any 12.1 WXGA (1280x800) matte widescreen should be compatible with Portege R600.
But if you want you can get in contact with an local Toshiba ASP and could order such screen from the guys
Here you an find a database with all ASPs worldwide:
http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT
Good luck -
Satellite Pro A10 - need a part number for compatible power adapter
My son has the older Toshiba Satellite Pro A10 Intel Celeron 2.0GHZ 256MB 30 GB DVD/CD-RW 14tft monitor.
His power supply is no longer working , can anyone tell me the power adapter part number as i am looking for a new one for him.
I need a part number to go on, and any other compatable power adapters numbers.
Appreciate any help given.
Thanks
janeHi Jane,
I believe the part number you need is PA3283E-2ACA
Check it out on the following link :-
http://www.ebuyer.com/customer/products/index.html?action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&pro duct_uid=64945&_LOC=UK -
What is the HP part number for the power adapter shipped with the dv7-6b32us​?
I would like to know what is the exact HP part number for the 90w power supply that is shipped in the box with the DV7-6B32US?
Hi,
Here is another list:
http://www.amazon.com/s?ie=UTF8&rh=i%3Aaps%2Ck%3AHP%20Pavilion%20dv7%206b32us&page=1
I would buy the 120W charger.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
HP Docking Station EN488AA - part number for power adapter
Hi,
I have a HP Compaq nx8220 notebook, with a HP Docking Station (EN488AA).
Unfortunately I have lost the power supply for the docking station.
I still have the power supply for the notebook itself (393955-001) but it does not plug in to the docking station. It is the correct voltage but only 90W instead of 120W, and the connector is the wrong size.
I've been looking online for the part number for the correct replacement power supply for the dock, but became very confused when I found sites advertising the same replacement part for both the nx8220 and the EN488AA when clearly they are different because the plugs don't match. None specify the plug size so I don't know which is which.
Can anyone help me identify the correct replacement part? Or better still, is there a plug adapter available so I can use my existing power supply for the dock too?
Attached are two photos - the plug from the power adapter next to the inlet of the notebook (fits) and the dock (doesn't fit).
Thanks,
EddieD97
This question was solved.
View Solution.The pin in picture looks liek a 5mm pin and one one on docking station is a smart pin. So you would need something like the one in picture in this link.
In the picture observe the component in left hand bottom corner.
http://www.amazon.com/HP-power-adapter-airplane-DV574A/dp/B0006VX07I/ref=pd_sim_sbs_pc_11?ie=UTF8&re...
I would say, take the adaptor to store and get one.
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution" -
SR520W-FE-K9 AC Adapter Replacement Part Number
Anyone help me get the part number on the AC Adapater and US AC adapter power cable part numbers for the SR520 router? I have a customer that "lost" both and needs a replacement. Any help is appreciated. I looked all over Cisco's documentation for the part number, but could only find CAB-AC2 which only appears to be the AC power cord not the adapter.
Thank you in advance for your help.Hi Michael,
The SR520-FE uses the same power supply as the 870: PWR-850-870-WW1=
This can be used with a 2 pin CAB-AC2 mains lead
Hope that helps,
Andy -
Report for list of materials supplying by particular vendor
How to find vendorwise list of materials supplying by him.
Hi
Go to MM03 and in the selection crieteria select MATERIAL BY VENDORS MATERIAL NUMBER and there you give the vendor and the list of materials will be displayed.
This information will be available once you have any purchasing doucments like inforecords, source list, PO, Contracts, SA etc. because you will no where give the vendor while you create a material master. Other way is to link vendor material number to sap generated material number.
You can use ME1M, ME2L
Thanks & Regards,
Kiran. -
Does anyone know the part number for the printhead for the HP Officejet 6500a
My printer doesn't print, initally it didn't print black, then I soaked the printhead in hot water as instructed now it doesn't print at all, so I need to replace it. Does anyone know the part number for the printhead for the HP Officejet 6500aThank You,
Hi Temprosal,I looked up the product specifications for the HP Officjet 6500a.Here are steps for ordering a new printhead: These steps apply to the United States only.If HP replaces your printhead assembly under warranty, you receive a new printhead assembly, cleaning materials, and a full set of new ink cartridges.If your printhead assembly is no longer under warranty, you can purchase a new one online.Go to the HP Parts Store website (in English). https://h20141.www2.hp.com/Hpparts/CountryChoice.aspxUnder Find your part(s), type CN643A in the Search by part number text box.Follow the on-screen instructions to order the printhead assembly.Jean
-
Slice battery craziness-What part number IS it???
Last September we purchased 5 slice batteries for our X230 systems. One of them went bad about a month and a half ago, and I opened a warranty replacement ticket with Lenovo but they can't find a replacement battery to ship me (it's been out of stock for about 6 weeks now). They shipped out an incorrect battery at first, and I am getting the run around with various warranty, tech support, shipping, and status departments (I've been transfered to them all, have to explain my situation over and over again, only to get more confusion each time).
The battery I have has TWO part numbers printed on it, but they can't seem to ever cross reference these part numbers with the battery. The place we ordered these batteries from (CDW) have a Manufacturing Part number which is a completely different part number and which is NOT printed on the battery itself anywhere. Then, I just got off the phone with another person at Lenovo who gave me a slightly different part number, and then another part number (5 so far). How can there be so many different part numbers for the same battery and how can Lenovo not be able to cross reference them?
On the battery itself, I have two part numbers (again, why two???)
FRU P/N: 42T4967
ASM P/N: 42T4904
Then, there is a manufacturer part number (not listed on the battery anywhere) 0A36280
Then there is a fourth part number they gave me which is 42T4903
Then they gave me another part number of 45N1035
How can this be so complicated and why so many part numbers?jbobst,
Given the time elapsed since purchase, this would generally need to be addressed through service. Service will deal exclusively with FRU or field replacement units.
During product life, we may introduce newer versions of a component or we may have an alternate supplier which can have a different FRU number but be functionally interchangable. When newer parts are released, generally the older FRU subs to the newer one so if you order the older number on a product, if we are out of stock on that, the newer one can be sent instead. Forward substitution.
I'll agree that this can be confusing and we try to make this seamless for the customer as much as possible.
Let me look into this overnight and see what we can do to locate stock. I'll work with bgriffin on what we can do to accelerate this for you.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Maybe you are looking for
-
Ipod wont charge on a wall socket-will only charge a little from USB.
Dear Apple, I have a 160gb ipod model which i bought 3 months ago. Recently my ipod has stopped charging from a wall socket completely.I ve been using the apple wall charger for a time so i know its not its fault.Further on i have tried another third
-
Problem with Mac OS X aliases in Dreamweaver
I have a folder full of MP3s in the Music folder in my User directory. I'm planning to use these MP3s on several different websites I own, and rather than copying each MP3 to several different Site folders, this seems like a perfect use for an alias.
-
Mailbox - Drafts...shows 1, but no drafted messages appear.
Looking for some assistance here...my Drafts mailbox in my email shows I have 1 drafted email. However, when I highlight on the mailbox, no drafted email is shown. How do I remove the notification showing I have a draft in that mailbox? It seems t
-
RE: error adding managed server in weblogic 6.1
Could email me how di dyou solve this problem....? Thanks a lot..
-
Disable of "Save Report" takes no effect in an interactive report
Hello, when I disable the checkbox "Save Report" in the report attributes of an interactive report, this has no effect. The menue item "Save Report" is still shown when I press the "Actions" button. Is this a bug or do I miss something? Regards, Arnd