Materials with stock in a month

Hi Experts,
I have to create a report plant wise and month wise for the no. of materials with stock without physical inventory, materials with phy. inventory.for each month in the selection screen.
Main problem i am facing is, user want to freeze the report values before the current month as every month stock gets changed. means if in june we have 100 materials with stock without phy.inventory in july we have 100 materials with stock without phy.inventory and in current month we have 120 materials with stock without phy.inventory, then report should display.
june2007 - 100
july2007 - 100
Agust2007- 120
but how we can freeze a report in previous data, i am selection materials from MARD.
please help me for this, if any code relatet to this it will be helpful.
Regards
Nik

Hi Santosh,
Those table i checked but not helpful
Regards
Nik

Similar Messages

SAP RVBCONVMAT2BM Set Batch Management to materials with stock

Dear Gurus:
We are trying to make mass changes in material master, to activate arround 2,000 materials with batch management flag. We heard about the SAP program release RVBCONVMAT2BM, to let us do it in ma massive action.
Could anyone of you can give me support to get this program?
In other way, the tasks to be done manually will be not succesful because we currently have more than one month of operations in SAP.

Hi Jose,
The report could only be provided by SAP developer after evaluate the specific situation on your system. I think the evaluation process should be very complex and that is why your reported issue has been hold at SAP for such a long time, also only a completed evaluation is done, the SAP developer could provide the report, this is to ensure the data consistency in your system because change the batch management indicator with material stock is a very dangerous bevavior, this could only be done under a strict check. You can't run this report by your own if this is not provided by SAP, because if it cause any serious database inconsistency by running this report without evaluation from SAP developer, then SAP will not responsible for the result and will not help you correct the situation, so I suggest you should better have some pacient and wait for the update from SAP developer, or you may escalate your issue to require a quick process.
Regards,
Rachel

Slow Moving Materials with qty

Dear Experts,
Is there any report to see the slow moving Materials with stock qty ?
Regards,
Manish Jain

Please check this answered link:
Slow Moving Report
slow moving report
Edited by: Afshad Irani on May 19, 2010 10:38 AM

List of materials with total PR, PO qty, and stock

Dear All,
Is there any std report to check the list of materials along with total PR qty, PO qty and Current stock.
This is to check, what is the total requirement of the materials and whether Purchase team has raised the PO or not ?
Please advise.
Regards
Vinoth.

Hi,
MD04 gives us the details of individual part no.
But, we would like to see similar details in the form of list of materials, with cumulative demand, cumulative OPEN PR Qty, Open PO Qty and Stock.
Please help.
Regards,
Vinoth.

Materials with Zero Quantity in Stock

Hi Experts,
I am preparing a Customized Stock Summary Report.
I have two queries.
1. How do i find Materials with Zero quantity in Stock????
Is searching for MATNR based on MENGE value 'SPACE' correct way to go about it?
2. How do i find number of same materials in the same plant ?????
Points will be awarded for the helpful answers.
Cheers
Gaurav Raghav

Hi Vineet,
Thanks for the quick solution.
I got point 1.
Just confirm whether i understood it correctly.
If a search for MATNR based on Field LBAST i.e Valuated unrestricted-use stock in table MARD, i will get all materials with Quantity Zero.
Have i understood correctly????
I guess i was not clear with my second point.
let me try once more.
My selection criteria is based on Plant.
Therefore i guess same materials under PS & JS are redundant.
So i want to display SKU excluding all Deleted Materials.
How do i go about it???
I have already coded to select deleted materials.
Cheers
Gaurav Raghav

How to find Stock with Customer as on Month End : 01/30/2009

Hi All,
i have a requirement where in my report output it has to display the details as shown below
Stock with Customer as on Month End : 01/30/2009
Material                          Qty
Pallet                        xxxxx
Cover sheet        xxxxx
For this requirement do let me know is there any standard bapi,program or how to proceed.

Hi Kumar,
Please find the link below
[Bapis|Re: Need a BAPI or Function Module for Checking Material Stock]
[Link1|Re: Function module to get the month name when start date and end date given]
[Link2|Getting Last Month End date]
Hope they are very Useful
Thanks
Kalyan

Creation of PRs for materials in stock

Hi,
When i run MRP for a finished product, many PRs are created for raw materials in stock also. Why this is happening?.Is this because of planning strategy in MD02 .We are using planning strategy 20.Pls suggest a way to stop creation of PRs for a material in stock.
regards
Ashok

Hi Ashok
Try Strategy - 40 VSF Planning with final assembly
Stocks on hand reduces the PIR during MRP run. e.g. if stock is 100 and PIR is 100, MRP run will not prompt 100 for procurement. if stock is 0 and PIR is 100, MRP run will prompt 100 for procurement.
This strategy should solve your problem. Just simulate this in ur test system and verify the results.
Regards
Rajesh
Do reward if useful.

How to load stocks for the months prior to initialization ?

Hello,
We load a cube stock from 3 ODS for BF,BX and UM extractors.
We are in a monthly snapshot scenario(we have read the specific how to but we must use 3 ODS one for each datasource because of data integrity (strong customer architecture contrainst).
For opening stock and the future month the solution is ok.
How to load the data for the 12 month prior the loading of opening stock ?
Specific datasources, full loading ?
Thanks to share our experiences
Best regards
Christophe

your previous months closing stock becomes opening stock for current month. Try the infostructure S039,this holds the closing stock of each month. You can populate this infostructure with program rmbs039. create a generic data source on this and populate opening and closing stock for each month.

Production in Aternative Plant with stock transfer

Hello,
For our MTO process we have prototyped several scenarios for production of configurable materials over more plants, all based on special procurement keys.
Scenario 1: procured from other plant with stock transfer (41)
Scenario 2: production in alternative plant (80)
With respect to the configuration process and ATP, scenario 2 has our preference. There is one discrepancy, since the plants are far away from each other we need a stock transfer (and paperwork for transportation) between the 2 plants.
However a feature of production in an alternative plant is that the GR of the semi-finished good is directly in the planning plant.
Of course we can do a transfer order w/o reference for the semi-finished good from plant A to plant B but nothing is triggering this process and for us no option.
Any idea how to get such process nicely streamlined? Is there a usable workaround?
Thanks, Hans
(note: If no clues, I intend to bring it in as a request for SAP customer influence)

Thanks Vaibhav,
All required CTP settings maintained and ther is PDS in alternative production plant too. The reason being when I remove special proc key APO CTP created planned order for the deficit qty.
Did you mean to say Original plant means planning plant? but there proc type has to be E with special proc as "80" .SPRO setting is maintained.(maintained Location Determnation settings as you mentioned) I have already tried "X"
but did not work..
Rgds
SCMBEE

Is it required to cost the materials with Price control "V" ?

Dear All,
Would like to know if we have to consider the items with Price control "V" during the cost run in CK40N..?
Since the system automatically updates the price of the item for price control "V", do we also require to update through cost run?
Please help me understand.
Best regards,
Praveen

Hi,
Materials with price control "V" is dynamically updated with value whenever there is a receipts. The system will calculate average rate by dividing total value by total stock. Hence, cost the materials for this price control is not relevant. It is recommended to have price control "V" for all externally procured materials.
Best Regards,
Madhu

Two materials with same material code

There are 2 components of a split AC, say Indoor unit and outdoor unit.
Now we purchase the two materials with the same material code.
Once an order is received, these two units are picked and sold. For easy identification, both the materials are procured under the same material code,
However, this does not give any visibility on the actual stock status of each component. So we have decided to have two different material codes.
When these are sold, we want to be able to use a BOM that will bind these two materials. However, there is no production activity involved. This will help us in printing the Header material on all documents like say Excise Invoice (Split AC Model 4354 - 1 EA)
Is there a possibility in SAP to attain this ?
Amit

Hi Amit,
you are not going to create two material codes in case of split valuation.
you can refer the following links for split valuation
Re: spilt valuation with batch management?
http://help.sap.com/saphelp_46c/helpdata/EN/1c/1a39516e36d1118b3f0060b03ca329/content.htm
http://help.sap.com/saphelp_46c/helpdata/EN/1e/dc30b3efb511d1a7aa0000e8a5f6c8/content.htm
http://www.sap-img.com/mm025.htm
or for your requirement you can manage the sam ewith different batches one is for internal and other is for external.
regards,
Adwait Bachuwar

Automatic STO for materials with split valuation

Hey Gurus,
Our client uses plant-to-plant STO to do transfers among internal plants. The current process: Run MRP in receiving plants --> MRP generates PReq --> Release PReq --> Assign Preq and create STO(from here, buyers manually check stock at issuing plant to see if there are "New" or "Rebuild" stock available, Rebuild stock always take the priority. Buyers manually assign Rebuild or New to ME21N).
The client tries to automate the STO process, ie, using ME59 or ME59N instead of ME21N. The problem is how the system does stock check and automatically enters"Rebuild" or "New" for materials with Split Valuation, which are done by buyers manually?
Thanks
JM

Hello,
Your client's request can be met with an user exit i guess. I have not used this but this is a suggestion that you can try if you wish.
The following things need to be done.
1. New PR type needs to be created and assinged to the STO document type.
2. When running a MRP at receiving plant, the system uses the special procurement key to create the STO requisition, hence we can write the relevant code in user exit in the MRP program. (please find the user exit for MD01)
3. If the special procurement key is 40 in the material master (MRP view), then system has to create the PR using the new PR type for STO. Also for those PRs the default batch should be "Rebuilt" entered while creating the PR.
4. As the batch is already entered in the PR, converting them to PO automatically will not be an issue.
if you feel that the above solution is little tough to implement, then please write a program to fetch the STO PRs and update the PRs one by one using the BAPI PR update or BDC with the batch "Rebuilt". This program you can ask the users to run before using ME59.
Regards,
Sakthi

Report for materials with shortage (GATP)

Hi,
We are using GATP for the cofirmation process. If you go to the CO09 transaction in the SAP-ERP system, it will take you to an APO screen. There are 2 fields (Receipts and Confirm quantities) on this screen; when Confirm quantities is greater than Receipts it shows that the material has a shortage.
Is there any report in APO that shows me the materials with shortage (Confirm quantities greater than Receipts)?
Thanks a lot

777,
Such info requirements are usually handled with the Alert monitor.
/SAPAPO/AMON_SETTING, create an alert type ATP, Availability check shortage.
http://help.sap.com/saphelp_scm70/helpdata/EN/47/f925c8852f383ce10000000a42189b/frameset.htm
Best Regards,
DB49

Stock balances by month

Hi All
Is there a report one can run to get stock balances by month for the periods that have already passed
Thanks
Vishnu

hi
Thanks
is there a report for intsansit stock by month
Vishnu

Non-configurable materials with EK02 costing

Hi all,
We have a range of non configurable manufactured materials which, when used in standard sales orders, generate a production order and BOM. Presently the cost is automatically generated from the material master and is populated as a VPRS cost.
As these materials have a BOM we want the cost to pick up from the BOM instead, ie as an EK02 cost. If we enter such a material and do a manual recost the EK02 populates in the sales order item conditions but we cannot get it to populate automatically as it does with configurable materials with BOMs.
In the define item categories section in SPRO we have removed the determine cost tick. This has the desired effect of removing the VPRS cost but the EK02 cost still doesn't pull through. In the Bill of Material / Configuration section of the item category we tried setting the structure scope to A (Explode single-level bill of material) and B (Explode multi-level bill of material) but this didn't work. If we set it to D (Configuration, poss. with BOM explosion), then we get the "item can be configured but there is no configuration" error when used in a sales order which is expected as these products have no configuration.
We also tried deleting the standard cost held in the material master to see if, as that value was now blank, it would pick up the EK02 instead but, alas, this also ddn't work.
Any help / suggestions would be most appreciated.
Kind regards, Rob

HI,
We are maintaining the Service masters for the services we render, there is no valuation of Inventory as only service is being rendered.
But we have maintained BOM and Routings for the services we render.
Even there is no valuation class in the serivice masters as this is non valuated.
Can you guide me more on this pls.
Thanks,
Ravi

Materials with stock in a month

Similar Messages

Maybe you are looking for