Materliazed View Log

i am going to truncate the materliazed view log in order to reclaim space , after truncating that materialized view log i would refresh the associated materliazed view completely, but problme is how can i knaow which materilaized view associated with view log?

Hi,
You can have a look at
http://aprakash.wordpress.com/2010/08/06/mview-log/
HTH
Anand

Similar Messages

Creating a Materialized View Log After the Data has been instered

Hi,
I am trying to create a method of replication from Oracle to MySQL using the Materialized View Log table.
This has been done before and works quite well, the only problem is that I am trying to impliment the log after the table has been created and populated and wish to push all the existing data through the log file...
Does anyone know if it is possible to refresh the Materialized View Log and not a Materialized View.
The way the replication is intended to work is:
Oracle> Data inserted into table
Oracle> writes the vector data to the MVL
Script> Monitors the MVL and can see the changes being made to the Oracle Table
Script> Updates MySQL with the data and removes the rows from the MVL
MySQL is then used with other unix systems
Currently we export the data from the table using Triggers and a cronjob running every x minute to check for changes in the TriggerTables
Many thanks for your time on this, I have been checking for almost a whole working day and not found the answer to this problem.

Thats what I thought, the MVL will only read data that has changed since it was created and wont have the option to load in all the data as though it was made before the table was created.
From what I have read, the MVL is quicker than a Trigger and I have some free code that prooved to work from a MVL using it as a reference to know what records to update. There is not that much to a MVL, a record ID and type of update, New, Update or Delete.
I think what I will have to do is work on a the same principle for the MVL but use a Trigger as this way we can do a full reload if required at any point.
Many thanks for your help.

View Log in Data Guard

In dataguard when i check view log(OBJECT-Viewlog) it return
"Data Guard Remote Process Startup Fail"?
Regards

hi there,
What's your question and you need to provide the version and the type of standby db too?

Materialized view (fast refresh mode) + Materialized view log on another DB

Hi all,
I created a materizalied view using this script :
CREATE MATERIALIZED VIEW GIPS.DOSSIER_MEDICAL_MV2
TABLESPACE GIPS_T
NOCACHE
NOLOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
USING INDEX
TABLESPACE GIPS_I
+ REFRESH FAST ON DEMAND +
START WITH TO_DATE('11-janv.-2011 16:00:00','dd-mon-yyyy hh24:mi:ss')
NEXT sysdate (1/96)+
AS
SELECT N0_SEQ_BLOB_PDF,
EXAM_ID,
MPR,
RSM,
rub,
date_deb,
SPE,
commentaire,
SPR,
MEP,
MSJ,
TTD,
exam_type
FROM DOSSIER_MEDICAL@dbdoc_lk
WHERE DOSSIER_MEDICAL.EXAM_TYPE IN ('TELEM', 'SCANNER', 'EPPO_SECMED');
So you can see I'm using a dblink in the select statement ( DBDOC_LK )
On the DB referenced by this dblink, I created a materialized view log using this script :
CREATE MATERIALIZED VIEW LOG ON "DOSMED"."DOSSIER_MEDICAL"
TABLESPACE "DOC_T"
WITH PRIMARY KEY
INCLUDING NEW VALUES;
The problem is that my materialized view has never refreshed since its creation ! and I don't understand why ?
Can someone help me ?
Thank you.

The REFRESH schedule causes a job to be created for the execution of the Refresh. You should see this job in DBA_JOBS / USER_JOBS.
The job would run only if the instance parameter JOB_QUEUE_PROCESSES is set to 1 or higher (the default is 0). This parameter can be modified dynamically with an ALTER SYSTEM command.
Hemant K Chitale
http://hemantoracledba.blogspot.com

How to CREATE MATERIALIZED VIEW LOG (MV fast refresh) with some JOINS

Hi @ all,
i'm trying to create a MATERIALIZED VIEW LOG for a fast refresh of a MATERIALIZED VIEW.
It works fine with a simple Request in the MATERIALIZED VIEW:
CREATE MATERIALIZED VIEW MV_ZOTD43_P
TABLESPACE GDII
BUILD IMMEDIATE
REFRESH FORCE AS
SELECT * FROM ZOTD43_P;
COMMIT;
CREATE MATERIALIZED VIEW LOG ON ZOTD43_P
TABLESPACE "GDII"
WITH PRIMARY KEY, ROWID, SEQUENCE INCLUDING NEW VALUES;
call DBMS_MVIEW.REFRESH('MV_ZOTD43_P', 'f');
But when I use a complex SQL-Request with some JOINS (one of the Table with spatial Data) in the MATERIALIZED VIEW, I get an error:
CREATE MATERIALIZED VIEW MV_TEST
TABLESPACE GDII
BUILD IMMEDIATE
REFRESH FORCE AS
SELECT lptd04_p.sst_nr AS sst_nr,
lptd03_p.aaaa AS aaaa,
lptd04_geom.geom as geom
FROM lptd04_p lptd04_p
JOIN lptd01_p lptd01_p ON lptd01_p.cre_nr = lptd04_p.sst_nr
JOIN lptd04_geom ON lptd04_geom.sst_nr = lptd04_p.sst_nr
JOIN lptd03_p lptd03_p ON lptd03_p.lief_nr = lptd04_p.lief_nr;
COMMIT;
CREATE MATERIALIZED VIEW LOG ON LPTD04_P
TABLESPACE "GDII"
WITH PRIMARY KEY, ROWID, SEQUENCE INCLUDING NEW VALUES;
call DBMS_MVIEW.REFRESH('MV_TEST', 'f');
Error report:
SQL Error: ORA-12004: REFRESH FAST kann für Materialized View "GDI"."MV_GDI_SST_STAMM" nicht benutzt werden
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 2255
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 2461
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 2430
ORA-06512: in Zeile 1
12004. 00000 - "REFRESH FAST cannot be used for materialized view \"%s\".\"%s\""
*Cause: The materialized view log does not exist or cannot be used. PCT
refresh is also not enabled on the materialized view
*Action: Use just REFRESH, which will reinstantiate the entire table.
If a materialized view log exists and the form of the materialized
view allows the use of a materialized view log or PCT refresh is
possible after a given set of changes, REFRESH FAST will
be available starting the next time the materialized view is
refreshed.
Am I doing something wrong or is it not possible CREATE MATERIALIZED VIEW LOG when the MATERIALIZED VIEW got some JOINS?
Regards,
Greq

Thanks for the link Alessandro ,
the error seems something to do with the Column-Type SDO_GEOMETRY, so
i create a new thread in the Spatial Discussion forum:
FAST REFRESHing of Oracle Materialized Views containing SDO_GEOMETRY column
Regards,
Greq

View log not showing physical SQL generated in OBIEE 11.1.1.6.7

Hi,
I am currently using OBIEE 11.1.1.6.7 version. In this version I am unable to view the physical SQL generated by OBIEE under Administration --> Manage Marketing Jobs --> Select a Job --> Click on View SQL OR Administration --> Manage Sessions--> Select a Job --> Click on View SQL. It is not showing the physical SQL generated by OBIEE for a report or segment which I have executed.
It was available in previous version i.e. OBIEE 10.1.3.4.2.
I have searched in metalink and it has been suggested to use the following <Filters> section into instanceconfig.xml file. I have added the following details into existing instanceconfig.xml file and then restarted the BI services. Still the problem persist.
<Filters>
<FilterRecord writerClassGroup="Console" path="saw" information="16" warning="31" error="31" trace="32" incident_error="1"/>
<FilterRecord writerClassGroup="File" path="saw" information="16" warning="31" error="31" trace="32" incident_error="1"/>
<FilterRecord writerClassGroup="Marketing" path="saw.mktgsqlsubsystem.joblog" information="16" warning="31" error="31" trace="32" incident_error="1"/>
<FilterRecord writerClassGroup="File" path="saw.httpserver.request" information="16" warning="31" error="31" trace="32" incident_error="1"/>
<FilterRecord writerClassGroup="File" path="saw.httpserver.response" information="16" warning="31" error="31" trace="32" incident_error="1"/>
</Filters>
Thanks,
Prasanta

Hi,
Thanks for the reply.
We used to view the log details (physical SQL) using Manage Marketing Jobs in OBIEE10g.
In OBIEE11g we can see the job details and when selecting a job (under Action column Details link) there is an option in left pane as 'View Log'. If I click on 'View Log' it is showing as 'No Logs Found'.
Just wanted to confirm if this is an issue in OBIEE11g.
Also, I believe there is a limitation in 'Manage Session' to view the number of job details whereas in 'Manage Marketing Jobs' section we can increase the number of jobs to be displayed.
Thanks,
Prasanta

View Log Function on Palm TX opens in Windows Media Player, instead of a new window.

hi,
when i clicked on "view log" after a hot sync operation a few hours ago, it brought up windows media player which, of course, could not display it. this is the first occurrence. i am using a palm tx with desktop version 4.2 and a hot sync version of 6.0.1. Strangely, view log opened up on my handheld as it has done many times. i closed the hot sync program, then opened it, and tried a hot sync--no go, media played still opened.
i'm running the palm program on an IBM Thinkpad, with windows xp pro, SP2.
thanks, in advance, for your advice.
campus56
Post relates to: Tungsten E

Your computer has a File Association problem.
The HotSync log file on a PC has an extension of .htm. Somehow, your computer has associated Windows Media Player with that type of file.
Open My Computer, then pick the Tools tab. Choose Folder Options, then the File Types tab.
Scroll down to the HTM file extension, and see what program is associated with it. I'm betting it says Windows Media Player. Tap the "Change" button, and pick the web browser program you use (mine is set to FireFox). Click the checkmark in "Always use this program" then click OK.
Now it should open correctly.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Creation of Materialized view and Materialized view log.

I wanted to create materialized view with 'REFRESH FAST ON COMMIT' option.
1) Table1 --it is partitioned range + list -- Added primary key
2) view1   -- having primary keys on view's base table
Steps:
1) create materialized view log on Table1 ; -- default primary key
2) create materialized view log on view1. --- It is giving below error.
ORA-00942: table or view does not exist
i wanted to create Materialized view like below
create materialized view
REFRESH fast ON commit
as
select ...
... from table1
where c1 in (select c1 from view1 where ... );
Question:
1) As i am getting above error while creating MV log on view. Can we create MV log on view or we have to create MV log on view base table?
2) To create MV with ''REFRESH FAST ON COMMIT' option , do we need to have primary key on master tables?
Any pointers on this will really helpful.
Thanks
Prasad

Also created MV LOG on 3 tables and tried with joins ..
create materialized view
REFRESH fast ON commit
as
select ...
... from table1 , tab2 t2,tab3 t3
where ....
and ...
Get same error ORA-12052: cannot fast refresh materialized view AVSYS.EVENT_LOG_MV
2052. 00000 - "cannot fast refresh materialized view %s.%s"
*Cause:    Either ROWIDs of certain tables were missing in the definition or
           the inner table of an outer join did not have UNIQUE constraints on
           join columns.
*Action:   Specify the FORCE or COMPLETE option. If this error is got
           during creation, the materialized view definition may have be
           changed. Refer to the documentation on materialized views.

Help with sql query on materialized view logs

I am in need of a query to find out what tablespace and snap shot site a long list of materialized view logs are associated with.
something like below except tablespace and snap_shot_site are not an option for this table.
select log_owner, master, log_table, tablespace, snap_shot_site from dba_mview_logs;

What is the refresh method set as?
Could you paste the full MV log creation script and the corresponding MV creation script.

Query on Materialized View Logs

We need a denormalised data step-up, we decided on implementing Materialized Views and started working on them. I have created Materialized View log on a table using below mentioned syntax
CREATE MATERIALIZED VIEW LOG ON <table_name> WITH ROWID
I have tested it and its working fine.A Strange error I am facing is, after an hour or so the materialised view gets corrupted and applicatin users gets an error saying error with the materialised view log.
The log entry in the data dictionary gets deleted. Later I have to execute DROP on the log to completely remove it.
I am confused how this can happen.

What is the refresh method set as?
Could you paste the full MV log creation script and the corresponding MV creation script.

Query on Materialized view and materialized view log

I am creating a materialized view something like this.but getting following error:
ERROR at line 1:
ORA-12032: cannot use rowid column from materialized view log on "SCOTT"."EMP"
SQL> create snapshot log on scott.emp;
Materialized view log created.
SQL> create materialized view scott_emp refresh fast on demand as select deptno,sum(sal) sum_sal from scott.emp group by deptno;
ERROR at line 1:
ORA-12032: cannot use rowid column from materialized view log on "SCOTT"."EMP"
Note when i have my query in materialized view as "select * from emp;" in place of
"select deptno,sum(sal) sum_sal from scott.emp group by deptno;" This code works fine.
How do i have a materialized with with a group by clause.
Thanks in Advance

Got the answer myself.
I wasnt adding all the required columns.
CREATE MATERIALIZED VIEW LOG ON scott.emp
WITH SEQUENCE, ROWID (<all the required columns>)
INCLUDING NEW VALUES;
Anyways,
Thanks guys...

Can't update master table when creating a materialized view log.

Hi all,
I am facing a very strange issue when trying to update a table on which I have created a materialized view log (to enable downstream fast refresh of MV's). The database I am working on is 10.2.0.4. Here is my issue:
1. I can successfully update (via merge) a dimension table, call it TABLEA, with 100k updates. However when I create a materialized view log on TABLEA the merge statement hangs (I killed the query after leaving it to run for 8 hrs!). TABLEA has 11m records and has a number of indexes (bitmaps and btree) and constraints on it.
2. I then create a copy of TABLEA, call it TABLEB and re-created all the indexes and constraints that exist on TABLEA. I created a materialzied view log on TABLEB and ran the same update....the merge completed in under 5min!
The only difference between TABLEA and TABLEB is that the dimension TABLEA is referenced by a number of FACT tables (by FKs on the FACTS) however this surely should not cause a problem. I don't understand why the merge on TABLEA is not completing...even though it works fine on its copy TABLEB? I have tried rebuilding the indexes on TABLEA but this did not work.
Any help or ideas on this would be most appreciated.
Kind Regards
Mitesh
email: [email protected]

Thats what I thought, the MVL will only read data that has changed since it was created and wont have the option to load in all the data as though it was made before the table was created.
From what I have read, the MVL is quicker than a Trigger and I have some free code that prooved to work from a MVL using it as a reference to know what records to update. There is not that much to a MVL, a record ID and type of update, New, Update or Delete.
I think what I will have to do is work on a the same principle for the MVL but use a Trigger as this way we can do a full reload if required at any point.
Many thanks for your help.

Reg ora-12034 materialized view log on younger than last refresh

Hi,
when i update my base table materialized view log shows the updated rows
but when i refresh materialized view it wont show updated rows in materialized view and also there is no rows in materialzed log
it shows error ora-12034: materialized view log on younger than last refresh
cheers,

FIX
A complete refresh is required before the next fast refresh.
Please run the process "Refresh Materialized Views"

Problem with view Log/Trace

I have installed Peoplesoft 8.9 peopletools 8.49 and web logic 9.2 and tuxedo 9.1.
I have installed everything succesfully.
I have configured the Process scheduler successfully.
In the reportnode(REP_NODE, the name i have given for the reporting node), i have set the URL as "http://localhost:8100/psreports/ps"( i don't know whether this is right or wrong. please let me know if that is wrong). and the URI Host as "SchedulerTransfer/ps" and URI port as 8100.
Now i went to the servers link and selected the PSNT and went to the distribution tab and i have given the report node as REP_NODE.
Maximum Transfer Retries as 3
Interval for Transfer Attempt as 30 seconds
Transfer System Files to Report Repository is checked.
Now when run any process the the distribution status is going to "posted". but the files are getting transferred to C:\FSDMO but not to C:\psreports.
when i click on the "Details" in the process monitor the "View Log/Trace" link is enabled and i go inside. i see the log files for that process.
I have the Problem here. when i click that it NOT showing any data. that is my problem.
Please tell me how to get my log files opened in "View Log/Trace" link .
Thank you,
Bye.

Hi Nicolas, Thanks for you reply.
What did you define in the configuration.properties file of your webserver for the parameter ReportRepositoryPath ?The ReportRepositoryPath is "c:\psreports"
http://img84.imageshack.us/my.php?image=configurationpropertieszm6.jpg
What is the URL of the link to the files (right click
on the link, then properties) ?http://localhost:8100/psreports/ps/4165/AE_PSXPARCHATTR_5391.stdout
"SchedulerTransfer/ps" is the URI resource.My bad, I gave "SchedulerTransfer/ps" under URI resource NOT in URI host. i just typed it wrong.
http://img501.imageshack.us/my.php?image=reportnodevf6.jpg
Are you connected with a URL as
http://localhost:8100/psp/ps/... ?
yes, i connect to peoplesoft this way.
if the image is not clear, just click on the image once.
Do we need to reboot app server/web server after we change something to the report node.(people tools -> process schedulet -> report nodes.
Thank you,
Bye.
Message was edited by:
user609854

GlassFish View Log File opens in editor instead of console

How to reproduce:
Open the Servers view, and bring up the context menu for a GlassFish server
Select GlassFish > View Log File
Actual: Log file is opened in an editor. Every time the file is changed, a popup is shown to ask whether the contents should be reloaded (unusable)
Expected: Log file is opened in Console view and provides the usual reloading and scrolling behavior
Eclipse: 4.3.0 (Kepler) (Platform 4.3.0.I20130605-2000)
GlassFish Tools: 6.0.3.201306271729
The question is: Can this bug please be fixed?

I've noticed that search is sometimes quirky in the console, yes. But that always felt like a bug in platform. Other than searching, usability of the console is superior: Automatically scrolling, Clear Console, Scroll Lock, Show Console when output changes, being in a view instead of an editor.
The editor is so bad that some people here refuse to upgrade to the new plugin version, instead installing the Indigo version from old workspaces.
How about just offering both in the context menu? They could be named something like View Log in Console and View Log File in Editor.

Materliazed View Log

Similar Messages

Maybe you are looking for