Matnr change with command AT
i have this code before insert into AT NEW ,END command
i see the matnr when it insert i get *************
why?
LOOP AT lt_lbkum.
AT NEW lgort.
i_lbkum-min = 'X'.
i_lbkum-lgort = lt_lbkum-lgort.
i_lbkum-matnr = lt_lbkum-matnr.
append i_lbkum.
ENDAT.
AT END OF lgort.
i_lbkum-max = 'X'.
i_lbkum-lgort = lt_lbkum-lgort.
i_lbkum-matnr = lt_lbkum-matnr.
append i_lbkum.
ENDAT.
ENDLOOP.
Hi Rani,
LOOP AT lt_lbkum.
AT NEW lgort.
<b>read table lt_lbkum index sy-tabix.</b>
i_lbkum-min = 'X'.
i_lbkum-lgort = lt_lbkum-lgort.
i_lbkum-matnr = lt_lbkum-matnr.
append i_lbkum.
ENDAT.
AT END OF lgort.
i_lbkum-max = 'X'.
i_lbkum-lgort = lt_lbkum-lgort.
i_lbkum-matnr = lt_lbkum-matnr.
append i_lbkum.
ENDAT.
ENDLOOP.
Regards
vijay
Similar Messages
-
How to change a setting in the Java Control Panel with command line
Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AMOK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
$ConfigFile_1 = @TempDir & "\deployment.properties"
$ConfigFile_2 = @TempDir & "\deployment.config"
FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
Sleep(10000)
FileDelete(@TempDir & "\deployment.properties")
FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM -
Change several Dataproviders with Command URL in WebTemplate
Dear Community,
Could someone help me with this problem?
I have an Webtemplate containing 5 Table-Items with several views of one Query - now I want to switch the whole 5 Qeries to other ones with one click.
I tried to realize this with command URL´s (like mentioned in SAP-Docu and some posts) but haven´t been successful. This only works for one dataprovider, furthermore the Filters won´t be applied in the switched template (We are on BW 3.5).
Any suggestions how to solve this issue in a smart way?
kind regards.
JürgenDear BW-Gurus,
now i will give you some coding - hoping somebody has a solution (we are on BW 3.5).
In the webtemplate there are 4 table-items with 4 several querie-views. With a click on button "Standard" the views should change to the other ones (works fine) and the filter values should stay (doesn´t work).
<FORM method=post name=Form1 action=<SAP_BW_URL>>change layout:
<input type="hidden" name="CMD_1" value="DATA_PROVIDER=DP_1&CMD=Reset_DATA_PROVIDER&DATA_PROVIDER_ID=ZQV_VC1&RRI=X">
<input type="hidden" name="CMD_2" value="DATA_PROVIDER=DP_2&CMD=RESET_DATA_PROVIDER&DATA_PROVIDER_ID=ZQV_VC2&RRI=X">
<input type="hidden" name="CMD_3" value="DATA_PROVIDER=DP_3&CMD=RESET_DATA_PROVIDER&DATA_PROVIDER_ID=ZQV_VC3&RRI=X">
<input type="hidden" name="CMD_4" value="DATA_PROVIDER=DP_4&CMD=RESET_DATA_PROVIDER&DATA_PROVIDER_ID=ZQV_VC4&RRI=X">
<input type="submit" class=SAPBEXBtnStd style="font-size:11px; height:100%" value="Standard">
</FORM>
the code works fine for changing the views, but the the nav-state after click is initial, even though i used the parameter "RRI=X" like mentioned here: [Forum Thread|; or here help.sap.com
what´s wrong with my coding? Do you prefer an other way to solve this issue??
thanks for every reply and hint
regards
Jürgen -
Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command + S, I get a looping "cannot mount errno = 19" message.
Problem started when I used Tech Tool Pro 6 to "de-fragment volume". Had to cancel that process before it finished because I ran out of time. Thereafter, when I startup my machine normally, I get the gray Apple logo at first, but it changes to a prohibited symbol (circle with a slash thru it) and hangs.
When I startup holding the Option key, I can see my internal drive, but I get the same results as above.
When I startup using the MacBook OSX Install DVD, it does not find my internal drive as possible destination.
When I startup using the MacBook OSX Install DVD and then run Disk Utility, it finds my drive, allows me to "repair" and says everything is fine.
When I startup with Command + S, I get a looping error message "errno = 19" and cannot stop it to do anything else.
When I startup from Disk Warrior v4.4, it does not find my internal drive to do any repairs.
When I startup from Tech Tool Pro 6 and run the "computer check" diagnostics, everything passes but the Volume Structure, which fails at "Volume Extents (B-tree)." When I use TTP's "Tools" option to run "volume repair" it will show my internal drive and allow me to click the GO button, but nothing happens and nothing changes.
I have a Time Machine backup on an external USB drive, but for as long as the internal drive doesn't mount, I can't use the backup to restore.It's a false report and should be ignored.
I would not rely on TT as I've already said earlier even before Grant posted similar advice.
I really think the Rigid Disk Block may be corrupted. This holds the partition map and could prevent a volume from being unmounted. Unfortunately, there is no way to fix that without repartitioning the drive which will remove everything. So, before going down this road I hope you have backups or can make a backup.
Drive Partition and Format
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Proceed with reinstalling OS X.
5. Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Launch executable with command line arguments
I have a programmer that I need to launch in my cvi code. I tried the system command and lauchexecutable command but cannot get the programmer to lauch correctly. If I run it from the command prompt or create a windows shortcut it works fine. Here is the shortcut I created:
C:\TPD\SAVS20P3\asix\up\up.exe /e c:\tpd\savs20p3\q33.hex/erase /q /p
I'm trying to run the up.exe software with /e c:\tpd\v20_hex\v20.hex /erase /q /p as the command line paramters.
I tried the following code which created the above path with command line
strcpy(filename,"C:\\tpd\\savs20p3\\asix\\up\\up.exe /e c:\\tpd\\savs20p3\\hex_ee\\"); ///e c:\\tpd\\savs20p3\\hex_ee\\"");
strcat(filename, hfile);//hex file name will change dynamically
strcat(filename, "/q /p");
I then tried LaunchExecutable(filename) and system(filename). The system functions gives an error. Its trying to lauch the /e c:\tpd\v20_hex\v20.hex file
any suggestions. I beieve its a simple syntax error.Well, apart evident typos in the code you posted, which is not creating the command line you stated, I can only think that before "/q" you should add a space to separate the option from the filename.
This code should create the correct command line:
strcpy (hfile, "c:\\tpd\\v20_hex\\v20.hex");
strcpy (filename, "C:\\tpd\\savs20p3\\asix\\up\\up.exe /e ");
strcat (filename, hfile);
strcat (filename, " /erase /q /p");
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
Can I set a destination object with command line
I have installed sun java system message queue 3.5 with sp1. Course of I can not run admin console, I want to know if I can set destination object with command.
Thanksall admin console functions are supported through the
command line administration tools
To change attributes on a destination administered
object, use imqobjmgr
http://docs.sun.com/source/817-3727/adminobj.html#wp14381
To create and administer physical destinations on the broker
use imqcmd
http://docs.sun.com/source/817-3727/brkrmgmt.html#wp19759 -
Generate PDF and Change printer command
Hello All,
Please, I need to generate a PDF file from a spool number, I'm trying to use the function 'CONVERT_ABAPSPOOLJOB_2_PDF', but it isn't working properly.
Somebody has a example code?
I need to change the printer button command and change the command of printer menu, for generate a PDF file directly when the user click in printer button or acess printer menu (Ctrl+P)...
I need to know how to generate this PDF file.
For example, the user generate the report normaly and after that if it clicks on printer button o select printer command on menu, this report will be converted in a PDF file.
Somebody could help me please?
Or somebody has a example code?
Thank you in advance for your colaboration.
Fernando Pena.Hi,
More or less like this:
parameters:spool like sy-spono.
spool_number = spool.
DATA:REAL_TYPE LIKE SOODK-OBJTP.
DATA:BUFFER_PDF LIKE TLINE OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = spool_number
desired_type = 'RAW'
IMPORTING
REAL_TYPE = REAL_TYPE
TABLES
buffer = contents_bin
BUFFER_PDF = BUFFER_PDF
EXCEPTIONS
no_such_job = 1
job_contains_no_data = 2
selection_empty = 3
no_permission = 4
can_not_access = 5
read_error = 6
type_no_match = 7
others = 8.
*clear contents_bin[].
if sy-subrc <> 0.
message e105 with 'RSPO_RETURN_SPOOLJOB'.
endif.
CALL FUNCTION 'SO_RAW_TO_RTF'
TABLES
objcont_old = contents_bin
objcont_new = contents_bin
EXCEPTIONS
others = 0.
data:TRANSFER_BIN TYPE SX_BOOLEAN." occurs 0.
data:CONTENT_BIN TYPE SOLIX_TAB." occurs 0.
data:OBJHEAD TYPE SOLI_TAB.
data:LEN TYPE SO_OBJ_LEN.
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
FORMAT_SRC = 'OTF'
FORMAT_DST = 'PDF'
devtype = 'PRINTER'
CHANGING
TRANSFER_BIN = TRANSFER_BIN
CONTENT_TXT = contents_bin
CONTENT_BIN = contents_hex
OBJHEAD = OBJHEAD
LEN = len.
OPEN DATASET filename IN BINARY MODE FOR OUTPUT.
LOOP AT contents_bin.
TRANSFER contents_bin TO filename.
ENDLOOP.
CLOSE DATASET filename. -
Export Data to Excel with commands API
Hello,With commands API, we want to add the possibility to Export Data to Excel to our users, but we don't want to give them the acess to the mouse right button, because they can change others things that we don't want.How can we do that ?Thanks.
Hello,With commands API, we want to add the possibility to Export Data to Excel to our users, but we don't want to give them the acess to the mouse right button, because they can change others things that we don't want.How can we do that ?Thanks.
-
How to change the command h short cut
Hi,
I was wondering how i can change the Command H shortcut on my macbook pro mountain lion.
Thanks!That article describes how to map keys to a menu option.
I would like to allow the cmd-H to be passed into an application un-changed.
This has been an issue for many years with no solution that I have found. I was only able to find a post where Adobe CS3 application allowed it to be mapped to their shortcut instead of hiding a window in OS X. I just want OS X to leave it alone and pass it to a appplication (VM) unchanged.
Any tips
Thanks -
Change keyboard commands in Lightroom
It should be possible to change keyboard commands in Lightroom. Like in Photoshop.
The problem I have on my Swedish keyboard is to toggle between grid and loupe mode. With the "`" key. Is it possible somehow to reassign to another key? Its really annoying. Its a very useful shortcut. :-)I am having similiar difficulties with the german keyboard and the english LR - a workaround i use is autohotkey a little prg that lets you use macros and reassign keys.. good luck
-
Help,"InsertTextData changed while command still active" Error
I try to use the command kCreatePageFromPageCmdBoss.
The case is, open a document with one page, and add some text frame to the page, then use the command to copy this new created page 100 times.
code:
for( int i=0; i<times;i++)
InterfacePtr<ICommand> iCreatePageFromPageCmd(CmdUtils::CreateCommand(kCreatePageFromPageCmdBoss));
if (iCreatePageFromPageCmd == nil){
ASSERT(iCreatePageFromPageCmd);
break;
iCreatePageFromPageCmd->SetItemList(pageUIDList);
InterfacePtr<ILayoutCmdData> iLayoutCmdData(iCreatePageFromPageCmd,UseDefaultIID());
if (iLayoutCmdData == nil){
ASSERT(iLayoutCmdData);
break;
// it is valid to set the layout control data parameter to nil, there are times when there is no view.
iLayoutCmdData->Set(::GetUIDRef(iNewDocument),nil);
// process the command
status = CmdUtils::ProcessCommand(iCreatePageFromPageCmd);
It is troublesome that I always get the error message:"InsertTextData changed while command still active" when I debug my plugin in the indsign, what shall I do?anyone knows?In my opinion,you can get the ILayoutControlData before the loop,
for example:
InterfacePtr<ILayoutControlData> iLayoutControlData(Utils<ILayoutUIUtils>()->QueryFrontLayoutData());
or:
InterfacePtr<ILayoutControlData> iLayoutControlData(Utils<ILayoutUIUtils>()->QueryLayoutData(IPMUnknown* inWindow));
After you get the ILayoutControlData, you can specify it in loop
as follows:
for(int32 i=0;i<times;i++)
iLayoutCmdData->Set(::GetUIDRef(iNewDocument),iLayoutControlData);
Please try it,and tell me the result,thank you!
hawkrococo -
When on a page if I click on a web link I get a new window that is blank and asks me enter a web address. This started happening with the new 3.6 version. It seems to have something to do with what I choose for the location in my privacy settings as the window changes with each setting but I still cannot get to the new site. Any ideas? I have no problem with this in IE and I have to keep opening IE when I encounter the problem on Firefox which is annoying.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
Post Author: nl11087
CA Forum: JAVA
A single quote/apostrophe in string parameter passed to a Crystal Report with Command datasource connecting to a SQL Server database, using sqljdbc driver does not escape the special character correctly. When doing a preview in the Crystal Reports IDE it allows you to escape the input parameter as expected and work correctly, but through the JRC component it fails. For string parameters without special sql server characters I experience no problems at all. When replacing the Command with a direct table there is also no problem.
Reproduction:
1. create a database db1, create a table table1 with a String type column col1.
2. Create new report Report1.rpt, create a connection to above, Add Command using 'SELECT col1, col2, col3 FROM table1 WHERE col1 = '{?Par1}' . Add a parameter field Par1 : String
3. In your java stand alone application using JRC add the parameter Par1 with a value "Jon Doe's Value" containing a single apostrophe. Export to PDF. (I also tried MSWord and this failed too, similar behavior). Additionally, in another test try to replaceAll("'","''") to escape it, preventing the code to break, but now it does not retrieve the expected row anymore and you end up with an empty report.
Exception StackTrace:
com.crystaldecisions.reports.exportinterface.exceptions.ExportException: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)
Caused by: com.crystaldecisions.reports.formatter.formatter.c: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.<init>(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.if(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.l.<init>(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.<init>(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.a(Unknown Source)
at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
... 17 more
Caused by: com.crystaldecisions.reports.dataengine.be: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.nr(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.bn(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.bp(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
at com.crystaldecisions.reports.dataengine.s.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.aa(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
... 23 more
Caused by: com.crystaldecisions.reports.reportdefinition.datainterface.n: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.reportdefinition.datainterface.p.a(Unknown Source)
... 35 more
Caused by: com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.queryengine.driverImpl.o.eC(Unknown Source)
at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.ap.ea(Unknown Source)
at com.crystaldecisions.reports.queryengine.ap.h(Unknown Source)
at com.crystaldecisions.reports.queryengine.ap.dV(Unknown Source)
at com.crystaldecisions.reports.queryengine.ax.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.bc.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.bc.do(Unknown Source)
at com.crystaldecisions.reports.queryengine.bc.do(Unknown Source)
at com.crystaldecisions.reports.queryengine.ae.cy(Unknown Source)
at com.crystaldecisions.reports.queryengine.ae.cz(Unknown Source)
at com.crystaldecisions.reports.queryengine.b1.bc(Unknown Source)
... 36 more
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near 's'.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement$StatementExecutionRequest.executeStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.execute(Unknown Source)
... 48 more
- JRCAgent3 detected an exception: An error occured while exporting the report
at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)Post Author: nl11087
CA Forum: JAVA
A single quote/apostrophe in string parameter passed to a Crystal Report with Command datasource connecting to a SQL Server database, using sqljdbc driver does not escape the special character correctly. When doing a preview in the Crystal Reports IDE it allows you to escape the input parameter as expected and work correctly, but through the JRC component it fails. For string parameters without special sql server characters I experience no problems at all. When replacing the Command with a direct table there is also no problem.
Reproduction:
1. create a database db1, create a table table1 with a String type column col1.
2. Create new report Report1.rpt, create a connection to above, Add Command using 'SELECT col1, col2, col3 FROM table1 WHERE col1 = '{?Par1}' . Add a parameter field Par1 : String
3. In your java stand alone application using JRC add the parameter Par1 with a value "Jon Doe's Value" containing a single apostrophe. Export to PDF. (I also tried MSWord and this failed too, similar behavior). Additionally, in another test try to replaceAll("'","''") to escape it, preventing the code to break, but now it does not retrieve the expected row anymore and you end up with an empty report.
Exception StackTrace:
com.crystaldecisions.reports.exportinterface.exceptions.ExportException: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)
Caused by: com.crystaldecisions.reports.formatter.formatter.c: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.<init>(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.if(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.l.<init>(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.<init>(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.a(Unknown Source)
at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
... 17 more
Caused by: com.crystaldecisions.reports.dataengine.be: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.nr(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.bn(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.bp(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
at com.crystaldecisions.reports.dataengine.s.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.aa(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
... 23 more
Caused by: com.crystaldecisions.reports.reportdefinition.datainterface.n: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.reportdefinition.datainterface.p.a(Unknown Source)
... 35 more
Caused by: com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.queryengine.driverImpl.o.eC(Unknown Source)
at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.ap.ea(Unknown Source)
at com.crystaldecisions.reports.queryengine.ap.h(Unknown Source)
at com.crystaldecisions.reports.queryengine.ap.dV(Unknown Source)
at com.crystaldecisions.reports.queryengine.ax.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.bc.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.bc.do(Unknown Source)
at com.crystaldecisions.reports.queryengine.bc.do(Unknown Source)
at com.crystaldecisions.reports.queryengine.ae.cy(Unknown Source)
at com.crystaldecisions.reports.queryengine.ae.cz(Unknown Source)
at com.crystaldecisions.reports.queryengine.b1.bc(Unknown Source)
... 36 more
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near 's'.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement$StatementExecutionRequest.executeStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.execute(Unknown Source)
... 48 more
- JRCAgent3 detected an exception: An error occured while exporting the report
at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source) -
I can't seem to update my apps or make any purchases on from my account. Nothing has changed with my credit card information and for some reason the iTunes Store tells me my information is incorrect. What do I do?
Yes, it's frustrating.
I don't have my iPod with me but, as I recall, the change is done in Settings/Store. That change will apply to NEW purchases. However, be aware that all purchases are permanently associated with the Apple ID that was originally used. Generally, it's only a problem when you need to update an app. IF you do your updating from iTunes and your logged in to the "wrong" ID, you'll need to log out and back in again. It's easier from the iPod as you do not need to log out/in but you do need to know the password.
Unfortunately, you can not merge IDs nor can you transfer purchases from one ID to another. Go here to find out exactly what you have. I have the same problem so I deliberately made both passwords identical to make things slightly easier for me. -
how can I fix this problem ? I cant close the safari with command Q anymore and the tabs don't have the exit botton that used to be on left corner !
Use cmnd+w to close the tab.
Maybe you are looking for
-
I need to capture directly into Imovie using EyeTV.
I can capture directly into EyeTV software no problem. I have an EyeTV 200 with a firewire connection. I can export from Eye TV into Imovie. I would like to remove a step and capture from my EyeTV directly into Imovie. Currently I get a message that
-
Background images for website enlarges on iPAD and iPhone
I have a responsive website. My CSS3 for the background looks like this: body { background url(.../images/backgroundArchx1920.jpg) no-repeat center center fixed; -webkit-background-size:cover; -moz-background-size:cov
-
I would like to connect my HDTV/Monitor to my mac-mini using HDMI but it does nothing
Any ideas?
-
Distribute different versions of data to 3rd party systems from SAP ERP2004
Dear fellow SDN users I am working in a large retail company where we are about to implement a new store system. The new system should be implemented in phases, where each phase covers one or multiple countries. Until the implementation is complete,
-
Urgent Tricky problem... I challenge you all....
I'm working on a very cool freeware Java text editor, that is working beautifully, except for the code used to change the color of reserved words, etc, on the fly... At the moment, I use a documentlistener. When text is inserted, I need to color some