Matrialized view not refreshing all records from source.
My materialized view is not refreshing a fixed number of rows i.e 198 every time from source to target.What are the reasons for such behavior. Also what should i do to resolve this discrepancy.
My mv is a FAST REFRESH ON DEMAND based on ROWID.
It has a simple sql query select col1,col2,col3 from testschema.mytable@mydb;
Thanks,
Sandesh
Hello Raman & KV,
Thanks for your Suggestions.
Unfortunately, I would not be able to implement any of your suggestions because, I m not allowed to change the DTP Settings.
So, I m working on finding the root cause of this issue and came across a SAP Note - 1506944 - Only one package is always extracted during direct access , which says this is a Program Error.
Hence, i m checking more with SAP on this and will share their insights once i hear back from them.
Cheers
Shiva
Similar Messages
-
DTP does not fetch all records from Source, fetches only records in First Data Package.
Fellas,
I have a scenario in my BW system, where I pull data from a source using a Direct Access DTP. (Does not extract from PSA, extracts from Source)
The Source is a table from the Oracle DB and using a datasource and a Direct Access DTP, I pull data from this table into my BW Infocube.
The DTP's package size has been set to 100,000 and whenever this load is triggered, a lot of data records from the source table are fetched in various Data packages. This has been working fine and works fine now as well.
But, very rarely, the DTP fetches 100,000 records in the first data package and fails to pull the remaining data records from source.
It ends, with this message "No more data records found" even though we have records waiting to be pulled. This DTP in the process chain does not even fail and continues to the next step with a "Green" Status.
Have you faced a similar situation in any of your systems? What is the cause? How can this be fixed?
Thanks in advance for your help.
Cheers
ShivaHello Raman & KV,
Thanks for your Suggestions.
Unfortunately, I would not be able to implement any of your suggestions because, I m not allowed to change the DTP Settings.
So, I m working on finding the root cause of this issue and came across a SAP Note - 1506944 - Only one package is always extracted during direct access , which says this is a Program Error.
Hence, i m checking more with SAP on this and will share their insights once i hear back from them.
Cheers
Shiva -
Incomplete Data on report (report does not show all records from the table)
Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek -
Delta package not fetching all records from Delta queue in r/3
Hello,
I have loaded Goods Movement Data using 2LIS_03_BF datasource into my BI system.
The Delta has been initialized and everyday the delta is being moved from r/3.
I observed that when I execute my delta package not all delta records are fetched into PSA from r/3.
For Ex: Before starting my delta package I checked in SMQ1 of my R/3 system and see that there are around 1000 records.On executing the delta package I see that the record count is reduced from 1000 to 400 in SMQ1.On executing the delta package again I get the remaining 400 records into my PSA.
Shouldn't the delta package get all records from the queue on single execution??
Is there some setting to define the nr of records to be loaded?
I'm confused with this behaviour.Please help me understand this behaviour.
Thank You.Hello,
First thing: the data is not transferred from the SMQ1 queue, rather the data is transfered to BW from the RSA7 Delta queue. You need to check the number of records present in the RSA7 queue.
Since SMQ1 is involved, i think you are using the unserialized V3 update method. In this method, when data is first written to the application tables, it is first transferred to the SMQ1 update queue,then via a job to the LBWQ extractor queue and then to the RSA7 delta queue. So the number of entries that you see in the SMQ1 queue are not the number of entries that have to be transferred to BW but rather the records that are waiting to be transferred to the extractor queue in LBWQ. Similarly, in LBWQ, the number of entries displayed here are not the no of entries that are going to be transferred to BW, they are the no of entries that will be transferred to the delta queue RSA7 when the next v3 update job runs.
If you want to check the number of records that will be transferred to BW, select the datasource in rsa7 and then click on the display data entries button.
Hope this helps.
Regards. -
Form does not display all records from table
Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thankshi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal -
Insert statement does not insert all records from a partitioned table
Hi
I need to insert records in to a table from a partitioned table.I set up a job and to my surprise i found that the insert statement is not inserting all the records on the partitioned table.
for example when i am using select statement on to a partitioned table
it gives me 400 records but when i insert it gives me only 100 records.
can anyone help in this matter.INSERT INTO TABLENAME(COLUMNS)
(SELECT *
FROM SCHEMA1.TABLENAME1
JOIN SCHEMA2.TABLENAME2a
ON CONDITION
JOIN SCHEMA2.TABLENAME2 b
ON CONDITION AND CONDITION
WHERE CONDITION
AND CONDITION
AND CONDITION
AND CONDITION
AND (CONDITION
HAVING SUM(COLUMN) > 0
GROUP BY COLUMNS -
Hi All,
I am developing a Windows store app (WinRT 8.1) where I am implementing offline capabilities using azure mobile services.
When I am syncing the data from azure to local SQLite, some records not syncing even though the data exist in that table... I cross checked my code and the query to filter the records, everything is fine from backend code. But I am not able
to figure out the issue, why some are syncing and some are not syncing.
The below mentioned is the code I am using to sync the table data from azure
var devicesList = await deviceTbl.ToCollectionAsync();
foreach (var device in devicesList)
var pItems = await planogram_ItemTbl.Where(x => x.DEVICE_ID == device.DEVICE_ID).ToCollectionAsync();
foreach (var pItem in pItems)
await productTbl.PullAsync("ProductSync_Table", productTbl.Where(x => x.Id == pItem.productGUID));
I want to sync only the data from product table based on the pItems I have, Is this way is correct ...
Can anyone suggest me how to pull the records based on the another table records...
With this approach I have sync problems, some records are not syncing and it is taking more time.Here are a few questions for you.
1) Do you get any errors reported?
2) Is "ProductSync_Table" the same name of the table in your Mobile services database?
Rather than going through a loop to Pull the data, you can try something like below:
var newItems = pItems.Select(pItem => pItem.productGUID).ToList();
await productTbl.PullAsync("ProductSync_Table", productTbl.Where(x => newItems.Contains(x.Id)));
I haven't tested the code but something like above should help.
Let me know if that helps.
Abdulwahab Suleiman -
Requisition Change History - not showing all records from CDHDR/CDPOS
Hello,
When viewing the Item Changes for a requisition in ME53N, I don't always see all the records that are contained in tables CDHDR / CDPOS. The missing records are related to release strategies. Does anyone have any ideas why this happens?
Thank you,
Regards,
JackieHello Jackie,
check flag "Change document" is set for the data elements.
Start transaction SE11, enter database table, push button "Display".
Check register "Fields" In the following screen, doulbe click on "Data element" for the field you want to check.
Select register "Further Characteristics" in the following screen, here you can find flag for "Change document".
Best Regards, Dirk -
CUBE Not getting All records from DSO
Hi Experts ,
We have a situation where we have to load data from a DSO to a Cube . The DSO contains only 9 records and while we r loading the data into cube , the cube is only getting 2 records . Thus 7 records are missing. Also The Cube contains more Fields than DSO. in the transformations , for the extra fields we have written end routine and those extra fields will get data by reading master data .. Any pointers how to get the missing records or what is the error ...
SamWhy multiple threads ????
-
Full update not getting all records from PSA to ODS
Dear BW Masters,
I am working with MM module. Iam using standard extract structure 2LIS_02_ACC
Iam doing full update. Getting full data 1300 records in to PSA. But getting only 298 in to my ODS. I tried changing fields in to KEY FIELDS AND IN TO DATA FIELDS in my ODS
But could not get data.
Pls help me..i have dead line before that i need to complete report on the same.
Its happening with the other HDR and ITM extractors.
PLs help me..Hello,
Look at this example:
R/3 Record:
CustNo | Name | Order | Amount
1234 | Customer1 | Order 1 | 100
1235 | Customer2 | Order 2 | 200
1234 | Customer1 | Order 3 | 300
If Cust.No is Keyfield, In BW you will get 2 records
1234
1235
If Order No is Key field, you will get 3 records.
It is not necessary to get the same no of records as they are in R/3. -
Personnel Admin AdHoc Query not retrieving all records
Hi, I recently added a custom info type to a copy of the SAP ad hoc query for Personnel Admin by using the menu path in SQ02>Edit>Change Infotype selection . The query is picking up the new info type and runs fine but does not retrieve all records from the table for a given personnel id. It only retrieves 1 record per id.
Has anyone dealt with this before and have an easy/quick fix for this?Have other users try the query, preferably a user with end user authorization.
I've had this issue before, I'm an IT person and I customized a Standard infoset.
During testing, I'm only getting 1 (in my case) Insurance record per employee.
The end user can see multiple record per employee.
Btw, did you customize a Global or a Standard Infoset?
Regards,
Olekan -
How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.
You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/ -
Display all records from 4 select list
Hi,
trying to associate 4 select list where i could display all records from a list linked to an other list.
1./ Created an item for each select list
P1_employee_name
P1_departments
P1_employee_type
P1_locations
2./Set both null and default values to '-1' for each item
3./Associated these items to source columns in the Region:
where employee_name=:P1_employee_name
or :P1_employee_name ='-1'
and departments=:P1_departments
or :P1_departments ='-1'
and ......
When running the report, couldn't display all records from a given list associated to an other list.
e.g: Display all emp and type of emp for sales dept in Paris.
Thks for your helpI believe the issue is that you need to group your predicates such as:
where (employee_name=:P1_employee_name
or :P1_employee_name ='-1')
and
(departments=:P1_departments
or :P1_departments ='-1')
Also, if you are not already using the "select list with submit" type items, these work great for this case as the page will be submitted when the user changes the value of employeenam and the report will then reflect this change. -
Query not displaying all records when execute it first tme
Hello,
i have an issue with the WEBI report.when i run the report first time it's displaying only few records, but when i run the same report second time it's displaying the more records and it's correct.
Could any one tell me why it's not displaying all records when i execute first time.
Thanks in advance for your help.
Regards,
PrathapWhich BOBJ version do you use?
Which kind of data source are you retrieving data from?
Regards,
Stratos -
How get all record from master and matching record from detail
hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamirhi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid
Maybe you are looking for
-
Using a stand-alone Dell XPS 420 with Vista 32 bit and an OKI C1500 printer connected by USB. Always a problem getting the printer going after it has been disconnected, but this time it's a big problem! Get a printer spooler error message and it defa
-
TOC link with a subscript character does not work in PDF
Hi, has anyone come across with this? A heading has a subscript character and when you generate a PDF, the TOC page has no link. Other TOC heading links work out just fine, but all these that have subscript, these do not. I have used Save As PDF and
-
How i can check my phone is under warrenty???????
i want to know, how i can check my phone warrenty period and my phone originallty...........
-
Oracle Provider for OLE DB R 9.2.0.1.0 problems
Just installed 9iR2 on my development machine and now .net framework is broke I am getting error message from all .aspx pages The 'OraOLEDB.Oracle' provider is not registered on the local machine. Visual Studio .Net seems to be fine though? any ideas
-
I want to convert image height and width into inch .this image in a pdf file and the only information about image is height and width in pixel.actually i want to get resolution of this image in ppi(pixel per inch).if any body have any idea about it t