Matrix Edit: How to disable scrolling thru unseen controller data?

I use key commands in the matrix window to navigate, select notes, move them, transpose them, change their length etc.
Upon upgrading from logic 4.7 I find that Logic now scrolls one by one through controller data like mod wheel events that I CAN"T EVEN SEE on the matrix page!
Why this is useful is beyond me, and it ruins my workflow. I would like to know:
a.) why this is useful and how people are taking advantage of this new feature.
b.) how do I disable it so logic only selects notes?

Matrix, it would be helpful if you added the version of Logic you're running to your profile. This is important because the behavior of various Logic functions differs between 7.1.x and 7.2.x.
Not listing this info results in the inevitable question that needs to be answered before constructive advice can be offered... "What verison of Logic are you running?"
-=iS=-

Similar Messages

NB100 - How to disable scroll function?

On a new NB100, Everytime I use the scroll bar in Internet explorer two pointing arrows appear in front of the pointer and disrupt the scroll function of the side bar. I was unable to turn it off or find where it is coming from. I would appreciate any information how to disable it and what it is.
Regards,
Je

Look in the Advanced Touchpad settings for scrolling configurations, go to Control Panel->Mouse->Advanced

How to disable scroll up starting dashboard

whenever I rapidly scroll up, the system jumps to dashboard, which is counter productive to my urgency in scrolling up. How can I disable this feature?

Port number for incoming connections must not be empty.
https://support.skype.com/en/faq/FA148/which-ports-need-to-be-open-to-use-skype-for-windows-desktop

How to disable Scroller bounce/pull effect

I have a Scroller with VGroup as viewport in one of my app built with Flex 4.5. I have some long label texts inside the VGroup. As you scroll down and release, it bounces back to top of the page. I would like to have a normal scrolling where the page stays at new scrolled position. How can it be done?

It sounds like the contentHeight and height of your viewport are equal so no scrolling is actually needed. Make sure you have a height set on your VGroup.

How can I scroll thru mail inbox using my touch pad with Yosemite, I was able to use my touch pad to scroll mail before

I can not use my touch pad to roll down my mail box or within a individual mail item. I was able before yosemite?
My touch pad works for all other apps,

I think I am having the same problem. I am using a macbook pro 15 and this morning it received an OSX update, it is now on 10.10.2. I use Office365 email for work and suddenly I can't use 2-finger scrolling over my inbox list. I can scroll through the email body and there is no problem with gmail inbox.
this is a real pain, when i attempt to scroll it attempts to scroll the whole web page, it doesn't seem to recognise that my mouse pointer is over the list of emails of my inbox.
i hope apple know about this and can fix it.

How to disable ATP when changing pricing date

When header pricing date in a sales order is changed, system triggers ATP. How can this be disabled?
Edited by: Jennifer Lua on Feb 22, 2010 10:10 AM

in material master Sales:general/plant data Availability check field enter no check and at the same time in VOV8 flag the availability check field.

How to disable block(update allowed) when data are retrive ?

Dear mates,
I have a form where are two blocks one is A_MASTER and A_DETAIL. By default A_DETAIL update allowed property is false. What happen when i insert data ? It's allow data to insert but don't permit to edit the data. So, I write When-New-Recorde-Instance trigger and the code are
condition
set_block_property(A_DETAIL,update_allowed,property_true);and the block,*A_DETAIL* is allowed to update.
Now, i need when the current record(Enter mode) displayed it should be available to update. When the record retrieved later, user can not update or change any thing.
Thanks,
problem solved :)
Edited by: HamidHelal on Dec 10, 2011 11:07 PM

sorry.

How to disable my onboard graphics controller hp desktop t3524

IM trying to upgrade the desktop im trying to install geforce 210 ddr2 but having no luck can some on help please

Yes I have the monitor hooked up to the GTX260 connection and I am getting a picture fine even though the 260 is not showing up in the device manager. It shows "standard VGA adaptor" in the device manager. That is why I was going to just install the latest drivers for the 260 and see what happens.

How to disabled all constraints when importing data (urgent)

Hi,
I am running import on my database. It’s dump file size 40GB & I forget to set import parameter constraint=N. due to that import is very slow.
Could any body help me out.
Thanks,
AT

Hi,
>>due to that import is very slow
I'm not sure whether this is the "source" of low performance, because just in the end of the process that integrity constraints are enabled.
1) New tables are created. (Type definitions, Table definitions)
2) Data is imported. (Table data)
3) Indexes are built. (Table indexes)
4) Triggers are imported. (integrity constraints, views, procedures, and triggers)
5) Integrity constraints are enabled on the new tables.
6) Any bitmap, functional, and/or domain indexes are built.
Cheers
Legatti

How to disable the "turn page" event triggered by the scroll/swipe function?

The problem is as follows.
The default behaviour of Acrobat Reader (both stand alone and browser plug-in) is to allow scrolling/swiping with the mouse wheel/trackpad. This is useful when the pdf's page length is greater than the screen's own length, because you can read the pdf with no need to distract your attention from the text to the scrollbar button. However, the same scroll/swipe function turns into a usability problem when the pdf is embedded in a html page and the pdf's page length is smaller than the browser's length. In this case, the scroll/swipe turns the page, distracting your attention from the text to the unintended behaviour of the browser. What happens is that you are so used to scrolling/swiping that you did it unintentionally in the pdf's caption area. You really did not want to turn pages in the pdf. Furthermore, if the pdf takes the whole html page, being a website, the scroll/swipe function flips the website pages in ways that neither the reader nor the writer had ever intended. Hence the question. How to disable, in this case, the "turn page" event triggered by the scroll/swipe function? A JavaScript should do, but the SDK documents did not help so far...
Message was edited by: 41457173
Message was edited by: 41457173

... or release a patch for the API,
... or suggest an alternative route to achieve the intended result.

How to disable a Entire row in a Matrix in Find Mode (User Form)

Hi,
How to disable a Entire row in a Matrix in Find Mode (User Form)
Regards
Jambu

Hi,
Iam using Bubble event = false in click event but the matrix row
is allow to edit but we cant save the document in Find Mode That is fine.
What is my actual requirement is In find mode matrix Row not allow to enter the data .
For examble In ADD mode i enter the data in Three rows (Item Section - Matrix) and
save the document. Whwn i open the document in find mode the three row is not allow
to editable like the same functionality of PO, sales Order, etc ..
Regards
Jambu

How to disable the "scroll lock" pointer?

I use 2-finger swipe to scroll on my trackpad.
I often get my pointer transformed into a scrolling pointer: it is gray circle about 1 cm in diameter, with a small white circle in the middle, 1 small arrow tip pointing down below the circle and 1 arrow tip pointing up above the circle.
This happens mostly when I touch the trackpad with 2 fingers, like when I am about to scroll with 2-finger gesture.
If I could post a png image I would but that is about as accurate as I could describe it.
When it appears, it locks the scrolling (with 1 finger swipe it keeps scrolling in the direction of the swipe).
This is very annoying because it interferes with the 2-finger scrolling.
Sometimes I get a "move" pointer (same as the one a above but arrow tips in all 4 directions).
Does anybody know what this "feature" is called and how to disable it?
Thanks

Hi,
The Scrollbar in the activeX browser is the property of the page being loaded and not the container.
If you have access to editing the HTML files that you are loading, add the following line in the html document:
If you don't have write access to the html files, then you can cover the scroll area of the activeX container with another activeX container. You can't use a decoration to cover it since the activeX container will remain on top.
I hope this helps.
Feroz

Does anyone know how to select text in Appleworks, click on the font button and then be able to scroll thru all the font so that one can see the text change as you scroll down the list, at present I have to do it one font style at a time and then repeat

does anyone know how to view text in Appleworks, to be able to click on the font button and then be able to scroll thru all the font so that one can see it change as you scroll down the list, at present I have to do it one font style at a time and then repeat? Thanks jl

Welcome to the Apple forums
Your question really belongs in the AppleWorks community/forum.
You can turn on fonts in actual type in the AppleWorks preferences.

How to disable col for editing in Advtable upon selection of radio btn

Hi,
how can we enable or diable editing of few columns in advance table based on selection of radio button?
i have 2 radio button on a page and one advance table (col1 ,col2,col3,col4,col5)
rad1 rad2 radio button
if user select rad1 then in advance table col1 col2 should be enabled for editing
if user select rad2 then in advance table col3,col4,col5 should be eanbled for editing and other col1 and col2 should be disabled for editing.
how can we accieve this in OAF ?
please guide me.

i tried this way:
---Set Action type property for radio to : FirePArtialAction and Event:ReadOnly
In CO PFR:
if("ReadOnly".equals(pageContext.getParameter(EVENT_PARAM))
AM.setReadOnly();
and then i need to set the value of the readonly property of the required columns based on the radio button selected
For the columns i bind the read-only property to transient attribute using SPEL
--Created Transient attr in advance table vo:
Name:ReadOnlytr
Type:Boolean
Updatble:Always
---Preapared SPEL syntax:
${oa.ViewObject1.ReadOnlytr}
---In Advancetable region for items set ReadOnly:
ReadOnly:${oa.ViewObject1.ReadOnlytr}
AM:
public void setReadOnly()
Code:
// now i need to make relevant columns to read only by setting the value of " ReadOnlytr " transient attribute for entire column values .
i am not getting how will i set value of " ReadOnlytr " transient attribute for entire column value .
but after doing this,page is not showing any error but its only refreshing page after PPR is fired ,
Please guide me whether i am following the correct steps.

How to disable edit link in interactive report

Hi,
How to disable edit(e3.gif image) link interactive report.
Thanks,
nr

Hi Jari,
Apex Version:3.2
I created on Interactive report on emp table I have created edit link on empno using Icon5 image.
Report Attributes>Column Attributes>Column Link.
I can Hide the Icon5 using following script but I need to disable only. I did not get any disable() method in Jquery.
Region Id:R812581842900385833
$(document).ready(function() {
var viewOnly=document.getElementById('P1_ITEM1').value;
if(viewOnly == "0")
$("#R812581842900385833 img").hide();
thanks,
Nr
Edited by: pnr on Mar 13, 2012 6:09 AM

Matrix Edit: How to disable scrolling thru unseen controller data?

Similar Messages

Maybe you are looking for