Matrix Editor & Multiple Regions: Moving Note Start Earlier Doesn't Work
Hi,
When viewing multiple regions in the Matrix editor, I can't move the start time of a note to the left (leaving the end position the same). This move works just fine when viewing a single region in Matrix.
Funny thing is that although the note won't budge, the move is listed in the Undo History as "Undo Left Corner Change".
Feels like a bug, but before I go there...
Can anyone confirm this behavior? It would be great to know if it happens in 7.1.1 as well as 7.2.3.
Best,
-=iS=-
MS,
Thanks for correctly pronouncing my name! LOL!
Wouldnt dragging the note or notes to an
earlier starting place and lengthen the right hand
side give you operation you wanted?
Yes, indeed it would. But then I'd have to remember where the ending should be.
Wait a second... (think, think, think...)
Ah, yes, I could slice the note in two, leaving the end piece as a place marker, move the first piece backwards to where I want it to start, then glue the two pieces together.
Good suggestion! Thanks for that. (DING! DING! DING!)
-=iS=-
Similar Messages
-
Moving backward and forward doesn't work as it used to do
The latest update, 32.0.2, or perhaps the one earlier, 32.0.1, has created a problem with Fx.
Moving backward and forward doesn't work as it used to do; and if it is done quickly, backward and then forward again to the last page, Fx gets confused and both pages get the same address and the browser shows the same page.
Guess it has something to do with the latest changes to how Fx handles the cache, or that in combination with how some pages use scripts.
As it is it can be a pain to use sometimes.Are you able to switch songs from control center when Spotify is playing on your phone?
If you have Spotify playing on your computer then it won't show in control center on your phone. You will have to open up the app to control music on your computer.
This is because iOS does not show anything on the control center unless an app is outputing audio. The Spotify app is not outputing audio, it only shows what is playing on your computer.
Does that make sense? -
Creating a new library with 'Shift/Start iTunes' doesn't work
I'm trying to start a new library, but pressing Shift when I start itunes doesn't work. It takes me to my existing library.
I've uninstalled, rebooted and reinstalled, and completely deleted any other libraries.
Any ideas how I can start a new library any other way?Thanks, that didn't work the first time but did work the second.
Perhaps I wasn't holding the shift key long enough - you presumably must keep holding it until the 'choose library' dialog actually pops up. I was releasing it after I'd clicked the 'start itunes' button. -
HT3964 macbook pro will not start on battery power works fine when plugged in
My macbook pro 15 inch early 2008 model will not start on battery power but works fine when plugged in.
check the battery info.. >about this mac>more info>system report and select "power" on the lefthand column. How many cycles? What does it say about the condition? etc.
-
Xfce4-power-manager does not start, but after relogin - works
Hi all.
When I login after system start, xfce4-power-manager does not start and systemtray icon doesn't appear. But after relogin (not restart), the systemtray icon of xfce4-power-manager appears and power manager itself works correctly (if I don't relogin, notebook will shutdown after 10 minutes of downtime - that rule doesn't exist in xfce4-power-manager settings).
Diff between two logs (before relogin and after, xfce4-power-manager --debug command)
diff log_1 log_2
35c35,36
< TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 0
> TRACE[xfpm-battery.c:150] xfpm_battery_refresh_visible(): visible=TRUE: ((XfpmShowIcon) SHOW_ICON_WHEN_BATTERY_PRESENT)
> TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 4
51d51
< TRACE[xfpm-polkit.c:238] xfpm_polkit_free_data(): Destroying Polkit data
System
Linux gready 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
systemd 212-3
xfce4-power-manager 1.2.0-6
That bug start happening after one of last week updates. I don't have a package cache.
Can anyone help me?
p.s. sorry for a bad English.Yes, i'm actually running xfce4 (all other things from xfce4 group are installed).
It starts from a login manager named LightDM.
AcpiD installed as a dependency.
logind.conf
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#InhibitDelayMaxSec=5
HandlePowerKey=ignore
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#IdleAction=ignore
#IdleActionSec=30min
I turned off key handlers because I truly HATE when I press power button and a notebook doing shutdown after that.
Last edited by theperfectblance (2014-04-17 06:57:32) -
an update was sent to my wife's computer. she tried to use it ,but it would not open. the older version worked fine ,but it was erased by the upgrade. How do we get the old version back? the upgrade--yahoo_firefox_3.6_set_us.dmg-firefox will not open.
The last version of Firefox that works in OS 10.3 is Firefox 2.0.0.20, you can get it from ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
-
"Get Started" URL doesn't work...
I downloaded Oracle Database 11g Express Edition, when I click on Get Started it gives me the below error
Oops! Google Chrome could not connect to 127.0.0.1:8080
I also tried using IE browser, same error pops up.Tried all that is there online, doesn't seem to work.
My OS is Windows7. Help Me, I am new to it and I need it badlyHey Orafad,
Thanks for your quick and prompt response, and trying to resolve my issue, really appreciate the help.
orafad wrote:
972606 wrote:
Pasting the complete contents of the cloneRmanRestore log file:
SQL> startup nomount pfile="C:\oracle\app\oracle\product\11.2.0\server\config\scripts\init.ora";
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00130: invalid listener address '(ADDRESS=(PROTOCOL=TCP)(HOST=MINDTREEM807031)(PORT=1521))'
...Instance startup failed on networking config error (and the remainder of the create db process becomes kaput).
Is 'mindtreem807031' a resolvable name?I'm not sure how this hostname got in there...I checked the listener.ora and tnsnames.ora and both have a correct host name which is MindtreeM8070313
>
Did os/networking configuration change recently? Is this on a portable device, or with changing network "locations"?This is on a laptop and probably has a dymanic IP being assigned by the ISP.
>
>
What does hostname command return?C:\Users\m8070313>hostname
MindtreeM8070313
>
What does following commands return?
ping -4 mindtreem807031C:\Users\m8070313>ping -4 mindtreem807031
Ping request could not find host mindtreem807031. Please check the name and try
again.
ping -4 localhost
ping -4 <output from hostname>Ping was successful for both the above commands.
>
>
>
SQL> @C:\oracle\app\oracle\product\11.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
Connected to an idle instance.
SQL> spool C:\oracle\app\oracle\product\11.2.0\server\config\log\cloneDBCreation.log
Weirdly, now when I try to connect to sqlplus, I see a new error:
C:\Users\m8070313>sqlplus /nolog
SQL*Plus: Release 11.2.0.2.0 Production on Thu Nov 22 11:56:58 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> connect
Enter user-name: sysdba
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter errorCommonly (on Win platform) this means the related Win Service is not started -- assuming ORACLE_SID and, possibly, PATH correctly set (the latter if you have another Oracle home installed, besides XE server).I've set a System Env variable -- ORACLE_SID as -- PLSExrProc, I assigned this from the listener.ora file which has (SID_NAME = PLSExtProc)...Please correct me if this is not supposed to be like this....
and PATH is set to
C:\oracle\app\oracle\product\11.2.0\server\bin;C:\Perl\site\bin;C:\Perl\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\Riverbed\Steelhead Mobile\;C:\Program Files\QuickTime\QTSystem\
>
Btw, the proper syntax is 'connect / as sysdba' or equivalently for user-name respons '/ as sysdba'.
Edited by: orafad on Nov 22, 2012 10:52 PM
Edited by: orafad on Nov 22, 2012 10:54 PM -
My start button doesn't work in Windows Pro 8.1
I installed an Windows Pro 8 to 8.1 Pro x64 on a desktop computer. Both were clean installations, no other software was installed. With Window 8.1 Pro, the start button worked for a day after all the updates, then booted the computer. Now, if I try to right
click on the Start button with the mouse; nothing happens. Thinking it was a virus, I used Windows Defender to search to the for a virus and nothing found. No other Windows updates to fix the problem! To me it just another glitch in Windows!
I updated a laptop at the same time with Windows 8 to 8.1 X64, not the Pro version. The laptop was a OEM version of Windows 8. The laptop works fine with Windows 8.1 after upgrading it.Hi,
Please try to copy WinX folder under C:\Users\Default\AppData\Local\Microsoft\Windows into C:\Users\[your user name]\AppData\Local\Microsoft\Windows.
If it doesn't work, please run following command to repair system:
dism /online /cleanup-image /restorehealth
If the issue persists, let's test the issue in New user account.
If all these steps doesn't fix your issue, please capture the actions during this process by using Process Monitor:
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
How to use, please refer to this article:
Using Process Monitor to capture system events
http://www.sophos.com/en-us/support/knowledgebase/119038.aspx
Keep post.
Kate Li
TechNet Community Support -
Note 121771.1 doesn't work
We created a form using Portal wizard and we need to validate a value when it is inserted trough that form. This value is validated under tolerance range stored in a DB table and it is generated by SQL that need parameters.
How we need to create the event in pl/sql like as the form validate the value and it insert
the value in the option "before to process the form" ?
The note 121771.1 shows an example but doesn't work. Any help?What about clearSelection() in class JList. I guess you want to achive that no item is selected in a list ?
-
"Do not import duplicates" doesn't work
Hi everyone,
I've been using Aperture 3.5.1 for a while and the import process always worked fine, until suddenly the "Do not import duplicates" feature stopped working. Now any time I plug my iphone or insert the SD card the photos I've already imported appear again on the import screen.
The funny thing is that if I open the library with iPhoto and import the images with it, the duplicate pictures do not show up, so it's definitely an Aperture issue. For the time being I'll keep importing stuff via iPhoto and then switch to Aperture for editing, but I'd like to get this thing fixed. I filed a bug report on Apple's bug reporter last week but got no reply.
CheersWell, it appears that if you
- import an image
- change your system time zone (going west, if that matters)
- plug the device again
then Aperure doesn't recognize you've already imported that image. I don't see how this could be considered a normal behaviour, I call it a bug (a bug iPhoto doesn't have btw).
You left something out: How did you set the Time Zone brick in Aperture's Import panel, when you made that test with a differnet Time Zone? Aperture uses the current system time zone to interpret the time stamps on the images as the default time zone, when you do not set the "camera time" and "actual time" correctly in the Import panel. This way you will import the images with a different time stamp, and then they will be different for Aperture. The date/time of the file are differnet, the file will be considerd to be different. But you can prevent that by setting the time zone correctly in Aperture's Import panel. -
After upgrade to Mavericks shutdown with start button doesn't work
Hallo!
I have a MacBookPro 15"/ 2,66 GHz/ Intel i7 (before upgrade to Mavericks OS 10.9.x was installed):
It was always possible to press the start button for about 1 second and this opened a popup where you could chosse "shut down", "sleep" or "cancle". After the upgrade to Mavericks this function doesn't work any more. When I press the start button the MBP goes into the sleep mode.
Any idea what happened to this feature?
ThanksThe feature is still there, but the power button function changed with Mavericks to be like this:
one-click = put the machine to sleep
click and hold (3 secs) = display shutdown dialog box
click and hold (10 secs) = hard power off -
Macbook Pro does not start up and nothing works. Need recovery!
Hi there
My MacBook Pro has shut down while wathcing a video and when ever I try to start up, a sign looking loke"no parking (Prohibitory Sign)" comes up after grey screen.
I tried to start it in safe mode but it does not go in safe mode.
Tried pram and nvram reset pro but didnt help.
Succesfully started in recovery mode ( tried both cmd + R and Cmd +opt+ R) tried disc repair but it cannot repair or verify anything. it gives me errors.
Could not recover anything in here as could not find any back up.
Tried to re-install Maveric but could not see HDD, so could not go ahead.
Inserted OS X installationCD that came with laptop, stared up by holding C, tried to repair disk but again, could not repair disk.
Could not do anything in Terminal.
I cannot even erase and re-install the OS
I also had windows 7 installed but now I cant start it up aswell.
The question is, what else I can try to save my computer? More importantly, I have so many pictures I want to save. How can I save them?
Thanks in advance!
Memis.Based on the procedures you have tried and the symptoms you have described, your MBP internal HDD had failed and will need to be replaced.
If you have a backup, your data should be available to you when you install the new HDD. If you do not have a backup, you may try to see if any of the data recovery software available online will work for you. Most have a trrial version that will tell you if they can be of any use for you or not. The last option is to engage the services of a data recover firm. They will not guarantee if they can get any or all of your data and will be very expensive.
Ciao. -
MSVCR80.dll not found, Apple Mobile Device failed to start, itunes doesn't work
Since a recent itunes update prompted by connecting my iphone, there has been massive corruption as indicated in the header. How do I resolve?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
It seems to have stopped working after installing the new version of iMovie.
You need to do as Jerry suggests because after the upgrade you very likely still have the old version of Numbers on your Mac. The new Numbers 3.1 is in your main Applications folder. The old version is in a subfolder within Applications named iWork '09. You can use both versions. But you can't use the old version to open a document that has been created or edited in the new version (or in Numbers for iOS).
SG -
Faxing to multiple fax numbers ...it doesn't work, can you help?
Hi,
I need to send one fax to multiple recipients. In the Help section, it says that once I've opened the FAX window, I can open the address book by clicking on the address book icon. That works, but when I click on a group or even just one address I get a beep sound and no results. So it's not letting me. I tried on another Mac and got the same thing. I CAN type in a fax number , but I don't want to sit there and type in all the fax numbers every time. The fax help SAYS I can, but I can't. Does anyone know why this isn't working? Can someone help? Thanks!!!!!!
KarenTry resetting it. Hold down the Sleep and the Home buttons until the Apple logo displays on the screen. This will not have any effect on your data.
Maybe you are looking for
-
Canon MP560 prints wirelessly ok but scanner is not recognized
Something is going on with the latest Mac OS. Seems to be only with Intel Macs only.Image capture does not recognize either scanner I have.(Canoscan 8400F also). I see others have broken connections other than Canon also. Has Apple given an official
-
HT1937 I am not able to make a call from my phone.
Sir, this is a very peculiar kind of problem I am facing and it has made my life terrible because not even your service providers are able to help me. I bought my phone from (Maharashtra-Mumbai, India) and my network operator is (airtel). My phone wo
-
Scheduling agreement for service procurement
Hi All, Am trying to create Scheduling Agreement for Services to Maintain Validity period for a longer time and do service entry sheet and invoice manually. But am not able to do service entry sheet , is there any option to do SES Other Side I did fr
-
I like the simplified sysvinit scripts that Arch uses, but I think the file locations could be improved a bit. /etc should be reserved for configuration files only; when you put init scripts in there as well the /etc folder gets a little cluttered.
-
Possibility of moving to fibre after move to a dif...
For years I've been on a none fibre enabled cabinet with 5 meg max adsl despite nearby neighbours being able to get FTTC. The other week my phone line went faulty (noisey line and adsl frequently dropping out). Openreach came out to fix the fault and