Matrix Report Fomating with Down group and Accross group list
Hello,
Does anyone know if there is way to ensure that the Down list of a Matix report finishes its list first instead of the Across list in layout. For example:
Pg1.
1 2 3 4
A
B
C
D
Pg2
5 6 7 8
A
B
C
D
Client wants to see
Pg1
1 2 3 4
A
B
C
D
Pg2
1 2 3 4
E
F
G
H
Thanks.
Ry
I had an inspiration while I was on the can of how you could get your desired solution. Assuming your columns are way too wide to get them all on one page, here's what you could do. You need to make two separate queries in your data model. One for columns 1 - 4 and one for columns 5 - 8. On your layout model you'll pretty much need to have two separate layouts, one for each query. Now if the report will only have one group value that it grabs each time it is run then you shouldn't have to add anything more. However, if you the user can select a range of values than you will need to alter your layout a little more. You will have to add a master repeating frame to contain both layouts with the item it groups on. Otherwise all pages containing columns 1 - 4 will print out for all item numbers before any pages will print out for column 5 - 8. Good luck.
Similar Messages
-
When I use Thunderbird with Yahoo Groups, Google groups, and other email lists, I don't get a copy of my own emails back from the list. I *do* when I use Mail, so it seems like a Thunderbird thing. I'd really like to see my own emails come back to me in the conversation so that I know where my remarks fall in the discussion; it's very disorienting when you can't tell if your email has arrived at the list, or not. I can't seem to find the setting, and I've searched thru your help topics, etc., to no avail. Thanks.
It's both gmail and mac.com email accounts, and it's all email lists -- including some privately hosted on servers, that are not Google groups, not Yahoo groups.
I'm not sure what you mean by "saving a copy of your messages yourself" in Mail -- if I email to the lists with Mail on my laptop or iPad, I can see it on my desktop computer too, right in line with other email messages in the thread, after the list resends the message I've submitted. It's only Thunderbird that this "invisible posts" behavior happens, and it didn't use to happen this way. I used to get my emails posting right in the thread. -
Default excise group and series group issue
Hi Gurus
I have a doubt. Is it possible to maintain the default excise group and series group in this order
sales org dis chnl division ship pt plant excise group series group
1000 EX CD 1000 1000 10 A1
1000 EX CD 1000 2000 20 A2
i tried this combination, but getting the error message that a key already exists....The header data sales area and shipping point already exists.... I cant understand why we cant give the same sales area and shipping point for a new plant combination
Thanks in advance
MathanHi Mathan,
When we say Excise group then it is maintained for the plant as it is maintained with Excise authorities. We can have same shipping point for 2 different plants but the possibilities are less and when 2 plants share the resources and facilities then those plants are registered as a single excise entity with the authorities. That is the reason that the option of having the same sales area and shipping point as header data is not allowed for more than one excise group. This is more business related than SAP.
Hope this clarifies the doubt.
Regards,
Antima -
Valuation Group and Tolerance Group - FS00
Hi all,
Can someone please tell me what the field 'valuation group' and 'tolerance group' are used for? I've found a brief description online, but if you could provide me with an example that would be great.
thanks,Hi
We will use Tolerance group for below mentioned activities
the maximum document amount the employee is authorized to post
the maximum amount the employee can enter as a line item in a customer or vendor account
the maximum cash discount percentage the employee can grant in a line item
the maximum acceptable tolerance for payment differences for the employee
For Valuation Group suggest you to refer below links
Valuation group code in Account determination?
Regards
Praveen -
Very Urgent Extn.Material Group and Material Group.
Hi Guru's,
I was created Generic D.S Using table (AFRU) for Orders Confirmation.I was Created Info Source AND ODS.
I nedd to maitain ODS Extn.Material Group and Material Group.but These fields are not Avilable in Data Source (AFRU Table not having).
Data source having Field AUFNR (order number) I was mapped To BW Object 0prodorder. I was maitained master data for 0prodorder.
0prodorder master data (0prodorder_attr) having 0material (PLNBEZ Field mapeed to 0material) as a navigational Attribute.
i am asking to all is it possible to bring Extn.Material Group and Material Group update rule level using master data attribute option?
Please help to me Above issue.it's very urgent.
Thanks & Regards,
Guna.Hi Manju & Gopi,
This Order Confirmations cube having data from 2 data sources.
There is a performence issue to clubbing so many tables.
Any way i was maitained 0material is attribute(Nav Attr) of 0proorder.i was loaded 0prodoreder master data.
0material having master data .Extn mat group & Material group are Nav Attributes of 0material.
Now is it possible to maitaining the data in cube Extn mat group & Material group ?
Please Give me Suggestion with out adding another table using view.
Thanks & Regards,
Guna. -
Dunning letters printing with zero balance and no invoice listing
How to trouble shoot 'Dunning letters printing with zero balance and no invoice listing' problem
As per my understanding it could be due to OB22 settings.
refer following SAP notes
335608,191927,
373296 -
Creation of new employee groups and sub groups
Hi All,
What all the steps should I follow to create new employee groups and sub groups? and How many structures should I create for this?
Its urgent pls.......
Good replies will be rewarded!!!!
Regards,
SitaHi
You can create the employee groups depending up on your clients requirement, Eg: Permanent, Temporary, Seasonal, Trainee, Advisor etc
And define the employee subgroups and assign them to the employee groups Like
Enterprise structure>Definition>Human Resource Management-->Employee Groups & Employee Groups
Enterprise structure>Assignment>Human Resource Management-->Assign employee subgroup to employee group
you can create employee subgroups depending up on your requirement like asst manager, manager, GM, MD, VP ETC an assign them to the employee subgroups ok.
Ensure that certain empployee subgroups may not be assigned to employee group based on requiremen, but create all the employee sub groups which is existing in the organization.
Regards -
Change employee group and sub group
Hi all,
During the new hire if an employees group and subgroup are enetered wrongly, how shouldl they be corrected. We have scenarios when the emplooyes group and sub group are corrected after a month or so and the users want to correct the same
How do we do it?Goto PA40 reselect the same Hire action for this employee and click execute. In IT0000 screen enter the new EG/ESG.
and save it. Then Save the IT0001, then fill rest of the infotypes.
If you have already process the payroll and the new Emp group / Sub group is in different payroll area you wont be able to change it. -
Primary Group and Additional Group in Solaris 10
hi!
We've just freshly installed a Solaris 10 system. I'm very new in Solaris. There's something i noticed, and i'm not sure whether is that normal.
In the user screen in solaris management console, i notice that i'm not able to see the Primary group and additonal group list. What i can see is only the Primary group in ID format. I'm able to see it only the first time when i launch the Solaris management console or switch from one workplace to another. After right clicking on the user properties for the second time, it disappear and show only the primary group id in integer. On the left hand side of the screen, it says "The group cannot be listed. You can change the primary group 10 to another valid integer. Because of error or oversight, group membership cannot be found. You can enter a number for the primary group, but cannot choose from a list of groupnames. Also you cannot choose Seconday Group until the group info is available". "Check group files, NIS maps, or load for possible corruption. If you have not already populated appropiate files or maps, See administrator guide, Naming and Directory Services(DNS, NIS, LDAP) or docs.sun.com for LDAP see also Solaris Management console help, about the toolbox editor to manage LDAP"
Is that normal? What could be wrong here? Please advise. Thanks.hi! Anyone can provide advise on the issue i encountered?
-
Singapore - Employee Group and Sub groups
Hi Gurus
While making employee groups and sub group for SG what factors should one keeep in mind??Hi,
When we are assigning the employee groups to sub groups select 25 singapore country allowed in the table V_T503Z.
that factor we need to remember.
Good luck
Devi -
I am trying to free up some room on my touch and am unable to delete any songs or books from the listing. With iTumes open and my touch listed I open the touch. I then select the items I want to delete from the touch and press the delete button. Nothing happens. I have also tried to right click on the item, but a delete option is not listed. What do I need to do to get rid of some books?
Open itunes, connect ipod, go to each tab, select what you want to be on the ipod, sync
-
What is meant by article grouping and site grouping and how to define
what is meant by article grouping and site grouping and how to define in SAP.
Hi Charan,
Article Grouping in its broader sense means grouping of Articles for ease of maintenance and business functions, either on the basis of Hierarchy or on the basis of Merchandise Category.Article Grouping is also primarily useful in promotions,wherein you can define a set of articles(which may not necessary fall under the same MC or Hierarchy) and club them together and assign them in a promotion.Txn codes used are : VBG1/2/3 - Create/Change/Display Article Group
For more information refer the link below
http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
Site Grouping is used for ease of maintenance by grouping the sites.It is also used to maintain the characteristics as well.This can also be used in Allocation Tables,promotion and Listing etc
Some of the Txn codes -
WB50 - Site Group,Create Alloc,.table
Wb56 - Site Group, Alloc.table,Maintain Sites in Class
WB60 - Site Group,Create Promotions
WB64 - Site Group,Maintain SItes to Class
Wb80 - Create Site Group Other
For more information,refer the link below
http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
Hope it helps
Rgds,
Aram K.
For more information refer to the link below -
Customer group and price group mapping
Hi All ,
I want to know where do we set the mapping for the customer group versus price group in the system .
Is there any customizing t-code for this?
Please advice.
Thanks in advance,
SwatiDear Swathi,
There is no T-Code for Setting Customer Group and Pricing gorup in Customizing
But we assign generally this two in front end due to requirements,
like we consider in this two in Pricing condition creation in VK11, here suppose we maintain Key Combination in Customer Group and Pricing Group then we consider
Hope this may helps you
Prem. -
Hi Experts,
I need your help in following topic. I have a requirement to build a big (overall) sales report in BI (NW2004s).
I would like to use BI Content because I'm running out of time and try to use all preconfigured stuff if possible.
In the requirement a bunch of fields of different SD DataSources are used (mostly 2LIS_11_VAHDR and 2LIS_11_VAITM but also some fields of other Datasources).
In SE16 I know how to locate all the field in the tables VBAK, VBAP, KNA1, VBKD,
LIKP, VBRK and of course some texts. Some fields could already be located by me, others couldn't even be found in BI.
The difficulty I have is to bring all the DataSources together so that the data is displayed correct - even if there are redundant parts.
For example:
For sales orders the doc no, sales org, distr. channel (and a lot of other header data) should be displayed in each line together with item data such as item no., material code, quantity (and a lot of other item data). If an order has multiple items each item should be diplayed in one row in the report.
In the Query the report should look like a common table (e.g. as in an ALV Grid if you model a query with SQ01) --> a lot of columns.
I'm not sure if I should use one big DSO with multiple InfoSources or if I should create a MultiCube and add the BI DSOs 0SD_O03 (Orders) and 0SD_O01(Order Items).
I know this is a very common requirement in SD. Do you know how to combine the most common SD datasources that no issues come up?
Thank you very much in advance,
Horst
Message was edited by:
Horst HenkelHi Horst,
Reporting on ODS / DSo is slow. I'm here at a cleint where we have lots of reports on SD_O01 and SD_O03. The best way to have good query performance is to build cubes on top of your ODS. Build a sales cube on top of SD_O03 with all fields and a billing cube on top of SD_O01. Load the data from your ODS to your new cubes. Then create a multipovider on top of both cubes, identify the keyfigures and characteristics required for your queries. Build the queries on top of the multiprovider.
You can display all items of a bill in one row if you choose drill-across for the irems in the query, instead of drill-down. So it looks for a standard SD report.
Regards,
Juergen -
Matrix report data with summary column in excel format
Hi ,
I want to display output of matrix report with summary column in excel format.
I have tried using spreadsheet but column header and actual data is displaying in proper order.
Please tell me the way how to do this ASAP.
Thanks in advance.Hi ,
I want to display output of matrix report with summary column in excel format.
I have tried using spreadsheet but column header and actual data is displaying in proper order.
Please tell me the way how to do this ASAP.
Thanks in advance.
Maybe you are looking for
-
Clear Google search history from Safari Toolbar (v.4.0.3 and up)
How to clear your search history. TEDIOUS but works. *Delete Google results pages from the history* In Safari 4.0.3 and up, you may now search your history. Search for the URL string www.google.com/search? and delete the records that match it. *Clear
-
Help!! Can't launch Acrobat 7 Pro (Error locating "updater.api")
Acrobat 7 Pro has worked fine all week, and today - boom! Receiving the following error messages: 1st Error Window "There was an error while loading the plug-in "updated.api". The plug-in failed to initialize. 2nd Error Window " The instruction at "
-
Error in ME21 (by User Exit MM06E005 in ME21N)
Hi All, I am implimenting '<b>MM06E005</b>' User-Exit in <b>ME21N</b>. I am using "<b>EXIT_SAPMM06E_006</b>" Function Exit. I write following code in it:- *& Include ZXM06U36 IF SY-TCODE = 'ME21N'. LOOP AT TEKPO. IF TEKPO-KNTTP = 'A'.
-
Problem installing CS2 from download.
I was attempting to re-install Adobe CS1 but could not get it to re-activate. I called Adobe support and was directed to download the CS2 suite from their site. I downloaded it and attempted to install. The filenames are a little different than th
-
Any tutorial for Live RTMP Dynamic Streaming using Strobe Media Playback?
Any tutorial for Live RTMP Dynamic Streaming using Strobe Media Playback anywhere available on the web ?