Matrix report in condensed mode in dot matrix printer
How can we print a 10g matrix report in condensed mode in dot matrix printer? The dot matrix printer is a Epson LQ 1070+ printer. I am tried using a printer definition file and given printer codes in the report. The printing is not taking place in condensed mode. This method however is working for other reports. Could any one help?
Regards,
Jayram
Edited by: jayramkumars on Feb 6, 2009 12:11 AM
Hi all,
This is to inform that I have myself found the solution. It is possible to print matrix report in condensed mode. The method for printing is same as for any other report. The mistake I made was not checking whether the .prt file is getting referred correctly. The DESFORMAT system parameter was getting populated through the calling form. By referring to the correct .prt file the problem got fixed.
Regards,
Jayram
Similar Messages
-
I want to print report somewhere in condensed and somewhere in bigger font. I also would like to control the page setup and printer (form feed, eject etc) programatically. I haev seen the prt file but unable to use it. Can someone send me a sample report file for my reference. Please mail me to [email protected]
Thank you,
Dwijesh, IndiaHi all,
This is to inform that I have myself found the solution. It is possible to print matrix report in condensed mode. The method for printing is same as for any other report. The mistake I made was not checking whether the .prt file is getting referred correctly. The DESFORMAT system parameter was getting populated through the calling form. By referring to the correct .prt file the problem got fixed.
Regards,
Jayram -
Print in Character Mode on Dot Matrix Printer
Dear All,
When we print any reports from SAP to Dox Matrix printers it comes in graphic mode. So it will take too much time to print and print is also not readable.
Same I want to print in Character mode (Simole reports where graphics are not involved e.g. Financial Ledger, Cash Voucher etc.).
Whether it's required to setup at printer level or at SAP.
ThanksHello,
I think this required to setup at printer level.
Regards,
David -
Reports for dot matrix printers in character mode 17 cpi
Hi,
I want to know how to develop reports to be printed in dot matrix printers
in character mode 17 cpi using BI Publisher 11g.
There is a guide available that can guide me?
How to print to a printer connected to a client machine?
How to print to a printer connected to a server machine?
Can someone help me?
Thank you,
Ricardo CesarHi all,
This is to inform that I have myself found the solution. It is possible to print matrix report in condensed mode. The method for printing is same as for any other report. The mistake I made was not checking whether the .prt file is getting referred correctly. The DESFORMAT system parameter was getting populated through the calling form. By referring to the correct .prt file the problem got fixed.
Regards,
Jayram -
Crystal Report Supporting Dot Matrix Printer
hi all.
Please tell me the crystal report's support for dot matrix printer , crystal reports are very slow on dot matrix.
RegardsQuestion is already answered in link
Printing Speed on Dot Matrix
Jeyakanthan -
Printing Reports to Dot-Matrix Printer
I have a customer that is trying to print a report to my company's dot-matrix printer and we keep seeing a "bold/unbold" command (7B, OB) where we should be getting actual bolded text. Is there anyone who has experience printing Oracle reports to a simple dot-matrix text printer? Can you suggest a printer emulation or fix?
The dflt132,dflt like.. files in c:\orawin95\rdbms\reports\print(may be dir is correct) for the printer and make sure that the file contains the correct escape sequence
like if bold escape "70",etc..
if you know Foxpro Special Char values,the samething you can apply in the dflt files.
Hope this helps.
null -
Reg: Dot Matrix Printer Settings problem
hello all,
The problem is with the Character format of Dot matrix printer, the printer is unable to print any graphical line. The line can be seen in print preview but in the actual printout the line is not printed. When the same O/P is printed through normal mode of dot matrix printer it is getting printed in the print out.
The client want all the Invoices to get printed in this format as it requires least usage of ink.
with regards,
sandeep akella.hello all,
The printer i am using is EPSON LQ 1050 . Does this printer support the graphical line in the character format ? In the normal mode i am able to print the graphical lines,but client want to use only in character mode as usage of the ink would be less.I dont know how to check the compatibility of the printer,can any one help what is the procedure to check the settings..do help me in this regards.
for above suggestions do tell me where can i post to get solution from a basis consultant.
with regards,
sandeep akella.
Edited by: sandeep akella on Jan 29, 2009 11:35 AM
Edited by: sandeep akella on Jan 29, 2009 1:28 PM
Edited by: sandeep akella on Jan 30, 2009 6:39 AM -
Hi all,
i want to create a matrix report manually by writing the query how can i create it in reports builder 10g
please give me the details steps or any documentations for this so can i easily create the matrix report and also design
for the matrix report. Please give me specific examples for creating the matrix report.
plz give me the detail steps.
please reply.......Have a look at this http://download.oracle.com/docs/cd/E12839_01/bi.1111/b32122/orbr_matrix.htm#g1017642
-Ammad -
Matrix Report in XML Publisher
Hi,
I have a requirement to develop a report through XML publisher. Can anybody tell me the steps to do ?
I don't know XML Publisher.
Thanks in Advance,
PradeepHi,
Check this link for developing the matrix report
Oracle Database and Oracle Applications: Matrix Report in XML Publisher
Regards
Srikkanth -
Matrix report in XML publisher with dynamic column groups
hi,
i have one matrix report in txt format having 5 columns under 1 month heading.
Now i want that all these 5 columns should repeat for multiple months depending upon input parameters.
S. No.
Organization Name
Organization Id
Project Code
1
GRANDWOODS 2
6825
1495
month
January
Wrk Count Ven
Wrk Cont Prw New
Wrk Amt Ven New
Wrk Amt Prw New
Tot Amt New
New
0
0
0
0
0
Existing
0
1
0
255000
255000
Total
0
1
0
255000
255000
rtf template is as follows:
S. No.
Organization Name
Organization Id
Project Code
F CS_11
ORGANIZATION_NAME
ORGANIZATION_ID
PROJECT_CODE E
month
Wrk Count Ven
Wrk Cont Prw New
Wrk Amt Ven New
Wrk Amt Prw New
Tot Amt New
New
F WRK_COUNT_VEN_NEW
WRK_CONT_PRW_NEW
WRK_AMT_VEN_NEW
WRK_AMT_PRW_NEW
TOT_AMT_NEW
Existing
F WRK_CONT_VEN_EXISTING
WRK_CONT_PRW_EXISING
WRK_AMT_VEN_EXISTING
WRK_AMT_PRW_EXISTING E
TOT_AMT_EXIS
Total
TOT_CONT_VEN_NEW_EXIS
TOT_CONT_PRW_NEW_EXIS
TOT_AMT_VEN_NEW_EXIS
TOT_AMT_PRW_NEW_EXIS
TOT E
E
now, please help me as to how repeat these 5 columns for multiple months.
if anybody has some template for matrix report with multiple coloumn group repeatation, pls. share along with sample data.
regards,
mohit guptaHi,
Check this link for developing the matrix report
Oracle Database and Oracle Applications: Matrix Report in XML Publisher
Regards
Srikkanth -
Crystal Report speed problem on dot matrix printers
We are attempting to print marketing documents (sales orders) to a dot matrix printer using Crystal Reports. All the add-ons for B1 do this using the crystal report viewer which causes crystal to send true type fonts to the printer, making it very slow. We can run the crystal reports in draft print mode outside of B1, and the performance is good. Is there a way to get the same performance in B1 using Crystal?
All solutions we have found will require us to launch Crystal reports and have the end user enter parameters, using a link off the application menu works this way. But we are looking for a better solution to print to the dot matrix printer faster.
ThanksHi Peter,
When you are printing it from b1 make all the font to the regular type ( not like bold are italic) like that then it will be some how faster...
Regards
PL.Chidambaram -
Crystal Report , Dot Matrix printer , Landscape , Legal
Post Author: naser
CA Forum: General
IDE : VS .NET 2003,
Platform : .NET 1.x, .NET 2.0, Hello I have been working 4 day's only to get print job which is should be on legal size and landscape mode Here is my story , I have u2022 Dot Matrix Epson Printer (Defaults setting) u2022 Legal size paper First : In crystal report designer I setup printer I select the PAPER SIZE = legal Orientation = Landscape Using this code Code:
Dim Frm1 As New Form1 Dim RV As New CrystalDecisions.Windows.Forms.CrystalReportViewer CR.SetDataSource(PrintDatabase1.Tables(0)) RV.DisplayGroupTree = False RV.DisplayToolbar = True Frm1.Controls.Add(RV) Frm1.WindowState = FormWindowState.Maximized RV.Dock = DockStyle.Fill RV.ReportSource = CR Frm1.Show() When print the Document , the printer print in Portrait Orientation mode . why I donu2019t know second : same situation but I add this code Code:
CR.PrintOptions.PaperOrientation = PaperOrientation.Landscape When print the Document , the printer print in Portrait Orientation mode . why I donu2019t know thired : Code:
CR.PrintOptions.PaperOrientation = PaperOrientation.Landscape CR.FormatEngine.PrintOptions.PaperOrientation = PaperOrientation.Landscape
Again When print the Document , the printer print in Portrait Orientation mode . why I donu2019t know
Now after I changed the defaults setting for the Epson printer to Orintation = Landscape Paper size = Legal And used this code Code: SetDataSource(PrintDatabase1.Tables(0)) CR.PrintOptions.PaperOrientation = PaperOrientation.Landscape CR.PrintOptions.PaperSize = PaperSize.PaperLegal CR.FormatEngine.PrintOptions.PaperOrientation = CrystalDecisions.Shared.PaperSize.DefaultPaperSize = PaperSize.DefaultPaperSize.PaperLegal The printer print in Landscape mode but it not printing the data which located in the right side of paper While that I checked the properties of printer from printer button in the crystal report viewer I found the orientation = Portrait I think its mean the program print the document by coding as landscape but printer receive it and print it as portrait because that it is not shown the right side of paper
i'm upgrade fees program for our Department which has been developed using Q basic language, and the were using same printer and same size of paper. they were printing fine without any prablem like what im facing help to get the help soon thanks for all the membersQuestion is already answered in link
Printing Speed on Dot Matrix
Jeyakanthan -
Need to Take Fast Printing on Dot Matrix Printer Using Report 10g
Dear ,
I need to take a fast output of Oracle 10g reports on Dot Matrix printer
Client runs the report and open in PDF but when he takes hard copy on his/her local printer, then printer works very slow and take huge time to print a single page.
Kindly help me, how can client get the output directly on his locally attached Dot Matrix Printer and fast.
Reports desinged and compile in Report10g R2 and
Middle teir using =Application Server 10 R2.
Thanks and regards.
PriyaDraft mode is not by font. It is a specific printer mode. If you can not manually setup the mode, B1 may not have any abilities to print in this mode.
Thanks,
Gordon -
Crystal Report printing on dot-matrix printer
Hello,
I've developed an application using VB.NET and Crystal Reports in VS2008. The report generated gets printed correctly on modern laser or inkjet printers. However, the entire formatting gets affected when I print these reports on dot matrix printer. Apart from that. the print speed is very slow. I tried exporting the report to PDF, DOC and other formats - but no solution. There was Export to Text function, which is not working in Crystal Reports now.
After a research on this issue, I found out few links to some solutions - which actually doesn't work. These links are as follows:
http://social.msdn.microsoft.com/forums/en-US/vscrystalreports/thread/e24a8084-ad53-48bc-a7d5-065ef82636ac
http://social.msdn.microsoft.com/Forums/en-US/vscrystalreports/thread/dd506c66-4cdc-48a7-9fa8-2c6f14daef24/ (Same issue in C#)
I've seen some software, in which, when Print on Dot Matrix (custom menu option) is selected, data is sent to DOS mode and reports are printed from DOS mode.
Is there any solution for this? OR DOS mode is the only solution?
This is high priority issue. Even though we're moving ahead in IT industry, govt. still depend on 4 color dot matrix printer reports.
Waiting for solution
Regards
Mayur Tendulkar | www.mayurtendulkar.comAlso, as of Service Pack 3 Microsoft updated their security models so a new C++ runtime is required. Please see these Kbase articles and Forum posts for more info:
https://bosap-support.wdf.sap.corp/sap/support/notes/0001495319
Forum thread for info Setup And Deployment Problem
Info:
Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update and is available using the link below.
This needs to be installed before installing a setup package that uses the SP 3 merge modules.
http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-40ff-b072-9112bab119c2&displaylang=en
Thank you all again and have a great day
Don -
Text Format Report to Dot Matrix Printer
Hi,
I would like to know how do I output my reports to dot matrix printer. In this way I need to output the report from Report Server (in text format) and send it to the dot matrix printer.
If I send the report in PDF or JSP format, then the printing process will be slow as PDF or JSP format may contains some graphical objects. The printing process will be faster if the report is in text format.
How do I output the report from the Report Server in text format to the dot matrix printer?
Cheers
CheersHi Guys,
I am facing the same issue. Please if you find the solution.. I already tried using MODE=Character but the fields are cutting-off.
You can reach me at [email protected]
Thanks
Venkat
Maybe you are looking for
-
Invisible meta data in smartforms
Hello, I want to include meta data on every single page of a smartform that can be used as control codes by our printing service provider. This meta data has to be invisible on the printed page, but must be existent in the resulting spool (to be spec
-
Sorting Playlist is a Challenge
For some reasons I am not able to get the hang of sorting by multiple fields, for example, I have multiple playlists that I want sorted by Date Added descending, and within that by Album Example: Date Added 2009.09.15 Album A1 B1 C1 D1 Date Added 200
-
CRM Office 2007 - Windows 7 problem
Hello Experts, I need your help about something. When I try to attach a word document to a quotation, it seems like it's opening the document but closes back. I have done the activex settings of my web browser but it's still the same. It only happens
-
Hello, I'm developing scenario Sender Soap Adapter using https. How to configure o https? Thanks.
-
Premiere CC will not open 5.5 projects. Why?
I have puechased CC and can not open 5.5 projects. Why? Why do you offer chat when no one ever answers? Why do you spend so much time and money to avoid at all cost actually helping your customers?