Matrox MGA 450 MMS with dualhead on MSI Neo 875FISR2 Board

Hi,
i use a MSI 875PE NEO-FISR2 Board with a P4 Intel Processor and 512 MB DDR RAM.I have the latest bios on my mainboard.As OS W2K SP4.I wanna use the Matrox MGA 450 MMS with the newest Driver.I can install the driver as well,but the card wont work,i cant switch to another mode.is there a problem with old Matrox Cards in MSI Boards?All Hardware was tested on 2 other systems and they works fine.
System:
MSI 875PE Neo-FISR2
Intel P4 2,6Ghz
512 MB DDR Corsair Memory
80 GB SATA Seagate HD
130 GB Maxtor IDE HD
OS Windows 2000 SP4 uptodate

Similar Messages

  • V21 5800 - reply to MMS with SMS?

    I'm sure that before I upgraded to v21 I could reply to an MMS with an SMS by choosing from the options menu reply->via text message.  The "via text message" bit has gone now there is only a "to sender" - which replies with an MMS, or "with audio message".  Anyone else seen this?

    Just make sure that the "Subject:" header is visible when composing messages. When responding to an MMS (there only ever was a "reply to sender", there were never "reply by SMS" and "reply by MMS" commands on the 5800 since there never were "create new SMS" and "create new MMS" commands either, just "create new message" ), all you have to do is wipe out the content of that header.
    The 5800 converts your message to an MMS if there's something in the subject header or if you insert content that can't be sent via SMS like an image or video. If neither are present then it defaults to SMS.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Cannot send an MMS with Samsung Galaxy III

    Highly frustrating.
    I have turned on mobile data, turned on wi-fi, restarted it and it still doesn't want to send. The send circle just keeps going around and around, for hours! I have 2GB worth of data so it shouldn't be a problem. Can anyone tell me how to make it work because I really have no desire to drive up to Verizon, don't have the time. The phone is less than a week old. >.<

    No luck..>.<
    Perhaps I was doing it wrong. I took out the battery and held down the power button for 10 seconds. Then figuring I read it wrong, I took out the battery, let it sit for 30 seconds, put it back in and held the power button. Just powered on like usual. I really want to be able to send picture messages...>.<
    Date: Mon, 15 Oct 2012 23:18:46 -0600
    From: [email protected]
    To:  (removed personal email address as per Verizon Wireless Terms of Service)
    Subject: Re: Cannot send an MMS with Samsung Galaxy III - Re: Cannot send an MMS with Samsung Galaxy III
                                                                                    Re: Cannot send an MMS with Samsung Galaxy III
        created by B33 in Samsung Galaxy S III - View the full discussion
    Have you Pulled the Battery out and performed a Soft Rest?  by holding the power Button Down while the Battery is out..
    Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community
    Start a new discussion in Samsung Galaxy S III by email or at Verizon Wireless Community
    (deleted personal/private information)
    Message was edited by: Verizon Moderator (M)

  • I am trying to send mass MMS with an image

    Does anyone know of a way or an App that will allow me to send mass MMS with images and allow me to create groups. For Iphone 4s.
    I have over 2000 contacts, and i can't seem to find an App for group messaging capable of adding images.
    Any help is greatly appreciate it.
    Angel

    Use a utility such as Graphic Converter to  change the image to a jpeg using options to reduce the size of the converted image.

  • I have a factory unlocked 4s I'm haveing trouble with the mms withI have a  straight talk I'm useing the sim card swap with tmoblil sim card I'm following the insructions but it works for a while and then its gone. I've set the settings at least ten times

    I have a factory unlocked 4s I'm having trouble with the mms with straight talk I've been useing the sim swap system with tmobile i have put the settings in five times. The setting won't stay it works for a while and then it's gone. I'm not in a good coverage area but when i put the settings in i make sure i'm getting a good signal or near wifi. any suggestions would be great.

        Congrats on your recent upgrade actionkatie! I am sorry to learn of the difficulties you are experiencing with your Samsung Galaxy S4. Let's get to the bottom of this because we want you to love your phone.
    I understand you have done all necessary troubleshooting steps that should have enabled you to send messages to iPhone users without them having to disable iMessage. Have you tried contacting Apple Support regarding the inability to send a text message to iPhone users? Apple can be reached at (800) 275-2273.
    In addition, do you get a certain error message when your WiFi stops working? Have you verifed that Auto Switch network is disabled? To disable this setting simply to go Settings > Wi-Fi > Tap the Menu Key(to the left of the home button) > Select Advanced and it is called `Auto network switch. If you are still experiencing difficulties, please feel free to reach out to us for further assistance.
    Thank You,
    MichelleL_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT

  • Issue with Power management MSI Gforce GTX 770

    Hello,
    I contact you since I have bought one month ago a GForce GTX 770
    I do not have the serial Number but could havez a look at it quickly if needed
    I have since the beginning recurrent issues with the graphic cards and require support.
    System Windows 7 64 bits
    Last official Pilots up to date 335.23
    I also tryed the provided drivers 331.21 (9.18.13.3182 more precisely)
    Issue
    When the graphic cards is reauired high demands (in case of high GPU demand for games) the nvidia driver is crashing (nvlddmkm.sys). Sometimes windows recovers, sometimes not, the system is fully dead and only windows restore function could help restarting the system and restore stable driver set.
    Quote
    Nom du journal :System
    Source :       nvlddmkm
    Date :         17[SLASH]05[SLASH]2014 14:50:50
    ID de l’événement :14
    Catégorie de la tâche :Aucun
    Niveau :       Erreur
    Mots clés :    Classique
    Utilisateur :  N[SLASH]A
    Ordinateur :   Fabien-PC
    Description :
    La description de l’ID d’événement 14 dans la source nvlddmkm est introuvable. Le composant qui a déclenché cet événement n’est pas installé sur l’ordinateur local ou l’installation est endommagée. Vous pouvez installer ou réparer le composant sur l’ordinateur local.
    Si l’événement provient d’un autre ordinateur, les informations d’affichage doivent être enregistrées avec l’événement.
    Les informations suivantes étaient incluses avec l’événement :
    [BSLASH]Device[BSLASH]Video7
    CMDre 00000000 00000474 ff1fe205 00000007 00000000
    XML de l’événement :
    [XMLIN]Event xmlns="..."[XMLOUT]
      [XMLIN]System[XMLOUT]
        [XMLIN]Provider Name="nvlddmkm" [SLASH][XMLOUT]
        [XMLIN]EventID Qualifiers="49322"[XMLOUT]14[XMLIN][SLASH]EventID[XMLOUT]
        [XMLIN]Level[XMLOUT]2[XMLIN][SLASH]Level[XMLOUT]
        [XMLIN]Task[XMLOUT]0[XMLIN][SLASH]Task[XMLOUT]
        [XMLIN]Keywords[XMLOUT]0x80000000000000[XMLIN][SLASH]Keywords[XMLOUT]
        [XMLIN]TimeCreated SystemTime="2014-05-17T12:50:50.254312800Z" [SLASH][XMLOUT]
        [XMLIN]EventRecordID[XMLOUT]3277[XMLIN][SLASH]EventRecordID[XMLOUT]
        [XMLIN]Channel[XMLOUT]System[XMLIN][SLASH]Channel[XMLOUT]
        [XMLIN]Computer[XMLOUT]Fabien-PC[XMLIN][SLASH]Computer[XMLOUT]
        [XMLIN]Security [SLASH][XMLOUT]
      [XMLIN][SLASH]System[XMLOUT]
      [XMLIN]EventData[XMLOUT]
        [XMLIN]Data[XMLOUT][BSLASH]Device[BSLASH]Video7[XMLIN][SLASH]Data[XMLOUT]
        [XMLIN]Data[XMLOUT]CMDre 00000000 00000474 ff1fe205 00000007 00000000[XMLIN][SLASH]Data[XMLOUT]
        [XMLIN]Binary[XMLOUT]0000000002003000000000000E00AAC00000000 000000000000000000000000000000000000000 00[XMLIN][SLASH]Binary[XMLOUT]
      [XMLIN][SLASH]EventData[XMLOUT]
    [XMLIN][SLASH]Event[XMLOUT]
    Sorry for the replacements of XML and slashes stuff but it can t validate and can't validate either the code tag...
    Result
    Impossible to play games such as Diablo 3 Reaper of Souls without having a crash every 5-15 min...
    Impossible to run 3Dmark tests until the end. It somehow crashes sooner or later.
    In low charge the driver never crash.
    Tests I did
    Based on this new computer (everything is new into it)
    - Power supply seems to be the cause, thus i tested a more powerful one (520w to 700w) same result
    - i changed the card of PCI express plug on the mother board which did not do anything
    - I reinstalled fully win 7 and did the minimum installs such as antivirus and graphic drivers from nvidia. same result
    - I updated Power supply windows settings to high performance in order to disable auto adaptative voltage from the system. same result
    - I updated as well power supply nvidia option to best performances which did not solved the issue as well.
    Tests I did not do, since they are intrusive
    Update the Bios ? did not know if you have a more recent one
    My bios version is NV282MS.3A0
    Downclock the graphic card
    I will soon extract the card to put it in another computer to validate that this the card[SLASH]pilot that is having issue:
    What should I do to have a clear evidence of the issue which could be either the card itself, of the bios which does not manage properly the power consumption ?? How can I send you useful logs ? Is there is a diagnostic tool to provide you with better data to dig in ?
    I am stucked and unable to use properly this nez configuration ...
    Thanks in advance for your help
    best regards
    Fabien

    Okay, some more hints to graphic Card issue ...
    - Tested qnd Confirmed with another Games GTA4 Same Crash
    - Board Bios already up to date.
    - GTX770 has been put into an old computer, and the new one got a HD5850
    Comparison of confs (changes in bold)
    New Computer
    Board: MSI B85-G43 Gaming
    Bios: Version 1.0
    VGA: Radeon HD5850
    PSU:   Antec 520W
    Intel Core i5 Quad 4570K (Haswell) 3.20GHz [C0] Family 6  Model 60 (3C)  Stepping 3  Revision 17
    MEM: Corsair Vengeance 2x4gb
    HDD: 1To SSHD
    COOLER: Corsair CWC-9060007-WW Water Cooler
    OC: No
    OS: Windows 7 x64 Ultimate V6.01  Build 7601  Service Pack 1
    Old Coputer
    VGA: MSI GeForce GTX 770 BIOS NV282MS.3A0 80.04.e6.00.1e
         N770 TF 2GD5/OC sn 602-V282-41SC14-02009565
    PSU:   Cooler Master 700W Silent Pro
    Intel Core 2 Duo @2Ghz
    MEM: Corsair 4x1gb
    HDD: 500Go
    OC: No
    OS: Windows 7 x86 Ultimate V6.1  Build 7600
    Note that both GTX770 tests have been done with same provided MSI drivers
    Result
    1 Old Computer with GTX770
    Crash reproduced after a full 3D Mark
    My idea is that the computer itself is old and do not ask so much the GPU to work. Hard to reach the full power requirement. It has also a small 1280x1024 screen. But problem finally reproduced... so Issue lies in the Graphic Card
    2 New computer with old Radeon
    3D Mark fully launched multiple time without any crash
    Another hint saying Graphic Card has issue.
    Now a few questions :
    - Does the NVidia Bios flash changes the guarantee on it ? I mean the CG is new, I do not want to lose the guarantee.
    Thanks a lot for your time.
    Best regards

  • Can I send pictures via MMs with £10 everything pack from Iphone5

    I am having problems sending pictures with my Iphone 5,  I have a £10 everything pack I should be able to send pictures using MMs with this pack shouldnt I.

    Hi 
    No Problem that's what we're here for!
    Yeah if you plug your device in to iTunes and back-up all your data. For Apple help & support on backing up Click Here.
    Once it's all backed if you go into Settings > General > Reset > Erase All Content and Settings this will then take you to the initial set-up.
    To save you having to call you can register your replacement SIM Here.
    I'll keep my fingers and toes crossed that this works!
    Let me know how you get on. 

  • MOVED: I have problems with grafick motherboards MSI 845G max when i play games

    This topic has been moved to Intel P4 & Celeron P4 based board.
    I have problems with grafick  motherboards MSI 845G max when i play games

    There diff x4 agp and x8 agp.......... nothing!!!!!!!
    Check you have INTEL application accelerator installed!!!!!!!
    845GE-Max is very fast mainboard, only the single channel mem make's it slower than 865/875 chipset........ fact
    Check ALL drivers are COMPAT with system NOT the latest............. Try older drivers
    Del

  • TS2755 Why I can't send and receive MMS with Redpocket on the 4s,iOS 5.1.1?

    Why I can't send and receive MMS with Redpocket on the 4s,iOS 5.1.1?

    Check Settings>Messages>MMS Messaging and make sure it's set to on. Contact Redpocket and make sure your account is provisioned correctly. However, if Redpocket is not a supported carrier, it is possible that not all functions of the iPhone will work or work as expected.

  • I'm having trouble sending mms with my iPhone 3GS

    I'm having trouble sending mms with my iPhone 3GS

    This also happened to me after update to IOS 6. So probably it is cause your email outgoing stopped to work.
    So check your outgoing settings and you probably will solve the issue.
    Hope it will be helpful

  • Sample to send MMS with REST

    Hi!
    Anyone has an example how to build a POST request to send an MMS (with an image attached) with REST?
    I have this on documentation but it doesn't tell me how to attach an image:
    Message Part Content
    *"addresses": ["URI"],<The recipient(s)>*
    *"charging": {<This entire attribute is optional>*
    *"description": "String",<Text to be used for information and billing>*
    *"amount": "BigDecimal",<The amount to be charged>*
    *"code": "String",<A charging code, from an existing contractual description>*
    *"currency": "String"<A currency identifier as defined in ISO 4217 [9]>*
    *"priority": "Default|Low|Normal|High", <The message priority>*
    *"receiptRequest": {<This entire attribute is optional>*
    *"correlator": "String",<A correlator used to connect the receipt to the inital message>*
    *"endpoint": "URI",<The endpoint address to which the receipt should be delivered>*
    *"interfaceName": "String"<Descriptive only, a string to identify the type of receipt>*
    *"senderAddress": "String",<The sender of the MMS>*
    *"subject": "String" <The subject line of the MMS>*
    Thanks to all,
    Raquel

    hi,
    attachments are just regular mime parts of multipart/form-data POST request., like the way you upload a file to a servlet.
    thanks
    kiran

  • Uploading 450 KB with SFTP impossible

    Can anyone confirm that it's possible to upload a file with
    more than 450
    KB with SFTP in Dreamweaver CS4? At least I don't manage. I
    see the
    "Background File Activity" window trying to upload the file
    and then
    "Waiting for server...". At the same time I can see the file
    size growing
    on the server. Thus the data is received and stored. However
    Dreamweaver
    says it's waiting for the server. I don't know what's waiting
    for but at
    some point it stops waiting and cancels the transmission. Now
    the very
    same file is transferred successfully if I use FTP. Is this a
    known
    problem?
    Boris

    On Mon, 23 Mar 2009 09:17:05 +0100, David Powers
    <[email protected]> wrote:
    > Boris Schaeling wrote:
    >> Can anyone confirm that it's possible to upload a
    file with more than
    >> 450 KB with SFTP in Dreamweaver CS4?
    >
    > I can neither confirm nor disprove it. What I can say is
    that the FTP
    > performance of Dreamweaver is one of its weakest points.
    Adobe is aware
    > of complaints about the FTP support in Dreamweaver.
    Hopefully, these
    > issues will be addressed in the next version.
    Ah, good to know that Adobe is trying to fix these issues.
    The previous
    Dreamweaver version I had used extensively was MX 2004. And
    even back then
    FTP support was horrible in my opinion. I never tried SFTP in
    MX 2004
    though.
    > FWIW, I use Dreamweaver FTP most of the time, but if I
    have a large
    > number of files to upload, I always use an external
    program.
    I see. I'd like to benefit from the synchronizing feature in
    Dreamweaver
    though.
    Boris

  • Web cams for a G4 powermac (450 mhz) with osx 10.4.11 on

    I am hoping some kind soul will put me out of my misery here.
    I need a webcam for a g4 powermac (450 mhz) with osx 10.4.11 on
    I only have usb 1 ports so new webcams ex icecam by mcally do not work
    I think an old isight will work but need the specifics
    if anyone can supply me with a list of exact product details for cams that
    would definitely work - I am all ears
    best elluise

    Elluise102 wrote:
    I am hoping some kind soul will put me out of my misery here.
    I need a webcam for a g4 powermac (450 mhz) with osx 10.4.11 on
    I only have usb 1 ports so new webcams ex icecam by mcally do not work
    I think an old isight will work but need the specifics
    if anyone can supply me with a list of exact product details for cams that
    would definitely work - I am all ears
    best elluise
    (1) Check any webcam's specs for compatibility with the minimum requirements for system hardware, Mac OS, and the applications software you intend to use to operate your webcam. Failure to meet the minimum requirements for any system element can keep your camera from working.
    (2) External iSight is a great camera, but they are getting old as electronics go, and you have no idea how the one you buy now has been used or treated by its previous owner(s).
    I suggest that you buy locally and test any external iSight you are considering on your Macbefore you pay for it. That way you know whether it will work before you buy, and a local seller may be able to answer questions, if any, about connecting and using iSight. If you need help with how to make sure an external iSight works, see "How to test your iSight to ensure it is functional":
      http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
    If you consider buying an external iSight sight-unseen, I strongly suggest that you (try to) get a written guarantee that you can have the iSight examined by your Apple Authorized Service Provider and can have a refund or exchange if the iSight doesn't pass his checks.
    Even *if the external iSight you are considering is advertised as an NOS* (new, old-stock) iSight, it may not be covered by Apple Warranty. If the seller is not providing you service guarantees or warranty, you may be want to check Apple's iSight Service: Frequently Asked Questions, especially if you cannot test the iSight before you buy to be sure it is working.
    (3) If you want to consider Firewire webcams, there are a still some new Firewire cams available:
    • http://www.cwol.com/firewire-cameras/fire-i-webcam-unibrain.htm
    • other unibrain Firewire (IEEE-1394) cameras: http://www.unibrain.com/
    • iSweet may still be available: http://www.welovemacs.com/isweet1.html (page down)
    Be sure to ask vendor about system requirements mentioned above.  To avoid disappointment, also check whether the device comes with connecting cables and has an integrated microphone.
    (4) The full range of camera alternatives is discussed in this Discussions User Tip:
      http://discussions.apple.com/thread.jspa?threadID=2018211
    If your G4 has room, you may want to consider adding a USB 2.0 card to your G4 Tower so you have the option to consider the new UVC webcams that require USB 2.0. When connected via USB 2.0, UVC cams can work with Mac OS X later than 10.4.8 without additional driver software.
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

  • MMS with voice and pic

    Is it possible to send and or receive a MMS with voice and picture without it being broken down into two messages. I receive the pic and then receive the voice in a separate Quicktime file. My previous bb would allow the MMS to be opened with the in one file.

    Apple needs to address this also. Its extremely frustrating. Along with that issue is the issue of not being able to forward those same kinds of MMS. For some reason "Forward" gets dimmed and cannot be selected when you select both the picture and audio file. You can do only one or the other...not both. This has been an issue since Apple implemented MMS on the iPhone. Its absurd.

  • MMS with SMIL part Display problems

    Hi, A freind of me has just bought a new Nokia 6700 Classic
    The problem is when he recieve an MMS with the SMIL presentation File, he has "can't display the SMIL part" !!!
    Do you have any idea about this problem ?
    Txs

    Just an FYI / update to this unresolved issue. I tried re-scanning the pictures and the new scans behave normally. I think what happened was that I rotated the pictures to make them upright when examining the 'event' as a whole; then somehow the program lost the rotation information (though I don't remember a crash I did have a couple during the long process); so when I tried to go from thumbnail to full size to edit that information was gone and somehow defaulted to 'blank'. That's my best guess, anyway as the issue was resolved by re-scanning.

Maybe you are looking for