? Matrox MX02

The MX02 , when importing live video (NTSC Video Signal) that format does it apear in Adobe Premiere
IE Do you have to render it before you can edit it.. When imported, Is the render bar RED or GREEN ?
If you have one, do you like it.? What would buy today ?
On the MAX option have you tried to render a file from RAW format to H.264 in HANDBREAK
and if so is the quality the same ?
Thanks Mike c.

You can capture the video as Matrox's AVI(Mpeg 2) or M2T I believe the other one is depending on whether it's HD or SD. I just always use the AVI since that handles both HD and SD.
If you bring the material into a Matrox sequence then it should not have any bar over the top and no you dont need to render it to edit it.
The current Matrox tools has a bug with the media encoder presets when you select an H264 preset. It lags out for a while and looks like the system is non responsive. Then it will allow you to change presets. Also the audio driver still has a bug in AE. If you want the Max and you can deal with a few bugs then the MXO2 is fine. We will have to see if the update fixes atleast the Media Encoder preset issue when it releases. The Max is great if going to Blue Ray. However the file based options have been limited on the Matrox Max presets. Although I was told you can change the resolution options manually.
The Blackmagic hardware runs fine with Adobe however it does not have any Mpeg 2 options for capture or H264 accleration on export. You can capture M-Jpeg or DVCPro HD though. The export options are your standard Adobe and those codecs besides uncompressed.
Eric
ADK

Similar Messages

Speedgrade with Matrox MX02 Mini

Has anyone had success getting SG to display on an external monitor via Matrox MX02 Mini? PP, AE, even PS can output to the monitor via Matrox MX02, but not SG. If I delete the PluginCache64 folder in regedit, it will show up as a display option the next time I launch, but then if I close and relaunch SG, it's no longer an option. Matrox says it should work. Adobe support says it doesn't but maybe in the next version. Anyone got a fix? I am on Windows 7 64-bit. :atest Matrox driver (installed after CC).

Second display works on my MacPro with the Matrox MXO2 mini MAX driver supporting Mavericks and Adobe CC (ver 4.1). Only got external monitor with this recent driver release using current CC versions
Kuhnen

New Matrox MX02 mini not working

Just got a new Matrox MX02 Mini. I'v installed the PCIe card seemingly successfully - it's showing up in the system profiler under "Other Multimedia". I downloaded and installed the software package 2.0 from the Matrox site.
But when I go into Final Cut I get no option for Matrox under Video Playback. And no video or audio is playing through my Matrox (as far as I can tell).
I'm on a Mac Pro running 10.6.4 and Final Cut 6.0.6. Trying to go out from my Matrox HDMI to a Panasonic HD TV monitor and with audio going to external speakers.
Thanks for any help.
Seth

Just got my new MXO2 Mini MAX, and it won't even power up. The pci-e card does NOT show up in the System Profiler under PCI cards. I tried the card in two other slots, still not showing up as being seen by the MacPro (2009 Quad Intel). The card also did not show up when installed in our other MacPro (2007 Intel). All cable connections, including power are according to Hoyle. Should I be seeing a light come on inside the MXO2 mini box? As it is now, no light, no life.
I pre-installed the driver, and in System Prefs the Matrox MXO2 mini icon reports: "..video hardware not found." The Product Name, S/N, and Firmware Version are all blank lines. Software version is 2.0.0.
Thanks,
Mark.
Snow Leopard 10.6.5
FCP Studio 3
MacPro Quad (2009 Intel)

Sound plays through Matrox MX02 instead of Komplete Audio 6 USB Device =(

In Adobe Premire Pro CC I can't use my NI Komplete Audio 6 usb device for playback. Instead sound always comes out of my Matrox MX02 when I'm scrubbing or playing.
Under Preferences -> Audio Hardware -> Default Device I have selected Komplete Audio 6. When I hit ASIO settings it brings up the expected Komplete Audio 6 Control Panel.
Under Preferences -> Playback -> Audio Device I see options for Adobe DV, Adobe Desktop Audio, and Matrox Player but no Komplete Audio 6.
My system is a custom built Windows7 PC. Any advice on getting sound out of my Komplete Audio 6 instead of the Matrox MX02 would be much appreciated!

the komplete audio 6 seems more problematic than expected.
Preferences -> Audio Hardware -> Default Device -> Premiere Pro WDM Sound causes stuttery playback. I've tried enabling/disableing "Device 32-bit Playback" under ASIO settings and I've also ensured that the buffer size (256 samples) is the same as in my Komplete Audio 6 Control Panel.
Preferences -> Audio Hardware -> Default Device -> Komplete Audio 6 audio playback is fine but if I alt-tab away from PPCS6 the application will freeze as I describe in this thread: http://forums.adobe.com/message/5412540#5412540 ...
I'm running the latest driver/control pannel from Native Instruments (3.1.0) and the latest firmware has been flashed to the Komplete Audio 6 (45).

Will matrox mx02 be recognized by adobe connect

Will matrox mx02 be recognized by Adobe Connect. I presently use a Canopus ADVC110 but would like to go up to a hi-def camera due to client pressure. TX

For a video input to work the OS of your computer must recognize it as a 'web cam'. You may need to use the DVdriver (free to try, $20 to buy) software, if on a Windows PC.
Keep in mind that the Video pod of Connect does not support HD video. So the video quality you see in the room will likely not improve by using the new device. The video in the Video pod can be set to 240P or 480P.

Export from CS4 to Matrox MX02 LE to Betacam deck

Hi,
I'm attempting to export a sequence to tape. I think I have all my inputs and outputs set up right but I can't seem to record my sequence onto tape. I have no problem capturing footage from tape but going the other way won't seem to work. I have a Matrox MX02 LE connected to a Sony Betacam deck. Not even sure where to start as far as diagnosing this problem. Any ideas?
Thanks,
Kevin

Well, the first thing is to confirm that you're getting a signal out of the s-video port on the MXO. Plug it directly into a monitor to confirm a signal. If that's not working, it's probably a Matrox MXO panel option or something similar (i vaguely remember in the past that you had to choose between s-video or component out, although that might be not required anymore). If you are getting a signal out, then it's likely a deck setting somewhere.
One thing that trips people up with betacams is that there's an EE mode that allows passthrough so that, if you're monitoring the output of the deck, it'll pass through the input. If that's off (ie PB mode), you'll only see black when you put the deck in record mode.

I have a Power Mac G5 - How can I run Matrox MX02 mini max

I have a Power Mac G5 Running Mac OSX 10.5.8 I recently got the MX02 Mini Max by Matrox to run my Final Cut Studio application version 6.6 and Im having problems with the pci board that comes with the matrox unit ( it does not fit in the mother board) how would i be able to use this with out connecting the pci board into my mother board on my Mac.?

Can't use it with a G5.
System requirements are Mac Pro and Intel-based MacBook Pro running Mac OS X Leopard 10.5.6 or higher.
IF (big if) the card is PPC Mac compatible, only Late 2005 G5 machines have PCIe. All other G5s are PCI.
The Matrox card is PCIe, not PCI.

FCP 7 and Matrox MX02 mini has bad audio playback

This problem has been frustrating me for months.
I have FCP setup to output video and audio via my marox MX02 mini. The mini is hooked up to HDMI and component, and RCA audio.
When playing back on the timeline in FCP the audio stutters, echos and drops out.
I've been bugging them at the Matrox forum, and each new update that comes out claims to fix the problem, and it gets a little better, but honestly it is still nowhere near satisfactory.
It's worst when stepping 1 frame at a time or scrubbing thru footage.
Does anyone else experience this problem? Am I doing something wrong?

What drivers are you running? What footage type are you working with? Format, frame rate...
Thanks,
Shane

Matrox MX02 Mini and FCP 7...

We have been using the MX02 Mini essentially for HD monitoring and have run across a few issues that have hindered productivity. It appears that one or two of these issues have been fixed in the latest 2.2.1 software release. The following remain. Has anyone experienced the same?
1) Audio scrubbing... audio cannot be heard on a per frame basis, usually audio is heard every three
frames or so.
Apparently this has not been fixed.
2) Audio playback. In the viewer... Hit play... Playback begins but the audio drops out and then
resumes... hit stop and playback repeats the last bit of what was playing before you hit stop.
3) Audio distorts, similar to an analog overdrive sound, when hitting play every 10 times or so.
Most of the projects that we are working with are Apple Pro Res 422 @ 23.98, Audio 48khz/16 bits.
Most of our computers are as described... 2 x 2.26GHz Quad Core Mac Pro running 10.6.6 and FCP 7.0.3.
Hard drives are local external 2TB G-RAIDs with plenty of room. We have check all of our media to make sure that it matches our sequence settings.
I realize that there are Matrox advocates out there, but we seem to have a hard time getting the MX02 Minis to work reliably.
All ideas are welcome. Note that we are working with Matrox support as well.
Thanks,
Scott

1) Audio scrubbing... audio cannot be heard on a per frame basis, usually audio is heard every three frames or so. Apparently this has not been fixed.
Well, that actually is the main thing that was addressed in that update. I didn't have the issue for a while, then I upgraded to snow leopard, and there it was. But that was something with the 2.0 and first 2.1 drivers. But the latest driver that was just released, 2.1.1...fixes that. For a lot of people, me included:
http://forums.creativecow.net/thread/132/860478
http://forums.creativecow.net/thread/132/860397
As for the other issues, that are all audio related... they should have been addressed too.
Make sure to update PROPERLY. Uninstall the older drivers, then restart. Install the new drivers... and when the updates erase and then update the firmware, when the computer will shut down, and you need to unplug the MXO2 mini for at least 5 seconds, then plug it back in. Then start up the system.
Shane

MATROX MX02 mini on NTSC monitor

hi, i just bought this product and it is a bear to set up. tech support closed. i am hoping someone out there with this unit might be able to help.
i am trying to connect it to my Sony PVM broadcast monitor, which is SD. i am going RGB out on mini via monster cables to RGB component in on the NTSC monitor (which has BNC connectors, but i have RCA adapters. I am using the NTSC setup in Final Cut. Nothing on screen. Can anyone help me?

There is a large list of flavors to play out when you chose Matrox in FCP in the playback tab - in that giant list, you have to match whatever your playing to. So, in your case, set it to NTSC. It doesn't actually say "down convert".
pJ

SG 2014 w/Matrox MX02 Mini - audio glitch

With previous version, I could not get SG to display on my external monitor via Matrox - at all. It was not an option. Now with 2014 and the latest Matrox driver, I can output through the Matrox, but the audio is choppy. As if it has latency issues. I've tried changing the settings under "display" and "audio" but to no avail. Anyone else using this combination? If so, does it work for you? I have no issues with the same setup, same computer and PP, AE, or Avid MC.

Thanks for the reply penguin!
I tried adding it to the kernel, but it did not work. I think usb_hid is just for usb keyboards/mouses/etc.
I noticed that every time I remove and plugin my flash drive /var/log/messages.log says something slightly different for my flash drive if that helps:
Oct 30 18:10:43 myhost sda1
Oct 30 18:10:43 myhost Attached scsi removable disk sda at scsi4, channel 0, id
Oct 30 18:10:43 myhost Attached scsi generic sg0 at scsi4, channel 0, id 0, lun
Oct 30 18:11:10 myhost (jftaylor21-896): starting (version 2.12.0), pid 896 user
Oct 30 18:11:10 myhost (jftaylor21-896): Resolved address "xml:readonly:/opt/gnosition 0
Oct 30 18:11:10 myhost (jftaylor21-896): Resolved address "xml:readwrite:/home/j
Oct 30 18:11:10 myhost (jftaylor21-896): Resolved address "xml:readonly:/opt/gnoition 2
Oct 30 18:11:50 myhost usb 1-6: USB disconnect, address 3
Oct 30 18:11:55 myhost usb 1-6: new high speed USB device using ehci_hcd and add
Oct 30 18:11:55 myhost scsi5 : SCSI emulation for USB Mass Storage devices
Any other suggestions?

CS4 and Matrox MX02 Mini with MAX

CS4 sucks.
Is there some kind of written rule that eac new version has be worse than the previous ?
Why does Adobe keep cutting out the tools and processes we, I, want the most !
Examples;
WHY doe Adobe STILL refuse to put back in stop motion capture ?
Why has Adobe screwed up the whole export thing and made it not only 100 times more complicated, but, also able to do 100 times LESS than it always used to in previous versions ?
BUT, my immediate question is why are my 720x480i exports to MPEG2-DVD m2v repeatedly failing - unknown error ?
- Source File: C:\DOCUME~1\steve\LOCALS~1\Temp\fleming8mmfilms-sd-3_2.prproj
- Output File: C:\Sequence 01.m2v
- Preset Used: Custom
- Video: NTSC, 720x480, 29.97 drop frame [fps], Lower, Quality 5.0
- Audio: No Summary Available
- Bitrate: VBR, 1 Pass, Min 2.01, Target 4.13, Max 7.00 [Mbps]
- Encoding Time: 00:00:08
18/09/2009 9:35:55 PM : Encoding Failed
Error compiling movie.
Unknown error.

I didn't sin, but you did by assuming things that are not true.
1/ The project file is on the same drive as the export, BUT, the source files are on a different capture drive than the export to C.
2/ I've been using the Matrox RTX100 with previous versions of Premiere for 7 years, and the two have worked very well together all that time, and still are working very well, and, will continue to I've no doubt. - Just because you couldn't get it to work, does not mean they don't.
3/ The export I refer to did not have any connection to the Matrox box. All Premiere and Encore.
4/ I didn't mention that I had done a lot of successful export tests of various definition formats, to other formats, and including a 1 hour Full HD export, no problems.
So, - there - nyah !

Alternatives to Matrox MX02?

The Matrox has great features on paper, but there are lots of reports of conflicts. Any suggestions for more reliable performance, in the same price range?

Hi,
I had a BM Infinity Pro and was satisfied with it until CS4. The CS5.5 drivers did randomly crash, especially in conjunction with Mercury Play Engine and H264 footage. The BM-support recommended to better switch it off - Thank you BM ! The biggest bad point for me was the delay of 1-2 sec of fader movements in PPro's mixer window. This was really unusable for mixing sound. All updates didn't bring any fixes for Intensity Pro, maybe this is better with Ultra studio, but I've lost my faith in BM's programmers and switched to a Matrox MXO2 mini.
I tried an ordinary mini without this MAX-option which is definitely only useful for H264 exports on systems with slower CPUs. The drivers are even worse than BM's and I was very disappointed - until I tried the actual beta drivers 6.1. With them the Matrox device is running stable and much faster than my Intensity Pro. I noticed that the graphics card (quadro 2000) is used much more than in BM timelines so I think the Matrox engineers understand the Adobe architecture much better.

Matrox MX02 with CS6

Hi,
any ideas if the matrox mxo2 works well with cs6, have a chance to buy one loacally for a low price.
I am aware that there has been issues in the past with matrox products, is it still the same.
any other recoemndations for a I/o
Baz

The MXO2 mini works far better with CS6 than it has with previous versions, particularly with the recent revised driver.
You should bear in mind that the changes in Premiere have forced the removal of most of the old Matrox effects, and those that remain are no longer RT.
You no longer use proprietary Matrox presets as Premiere now copes with anything you throw at it. I still use the Matrox colour correction as I am used to it, and prefer it to the Adobe effects. Despite not being RT, it plays smoothly on my timeline without rendering, even when I have used Mercalli, scaling, and sharpening as well. This is on a 3930K system, not overclocked, with either 1920x1080p Matrox HD I-frame, or high bitrate Canon AVCHD 1080p.

Matrox $450 hardware for upscaling sd footage / hdmi in and out is usable?

I have a lot of Sd footage (DV 720x576) footage as I used to work with professional film 10 years ago or so. I would love to be able to upscale the footage to HD (1080) in a good way both quality wise and not to spend huge amounts of money on extra hardware. It seems Matrox came about reccently with some good hardware to do this. Does anyone have any personal experience with this product or any advice?
It is the: "Matrox Mx02 Mini":
http://www.matrox.com/video/media/pdf/products/mxo2mini/en_Matrox_MXO2Mini.pdf

The camera uses the Apple HDV codec. It looks good, and plays black well in Final Cut. It offers a pretty good variety of recording options 720, 1080, 30p, 60p, etc.
The XDCAM recording, however, has not been as trouble free. I recorded some footage using the XDCAM mode, and I could not get it to play back in an editing system using Adobe Premiere CS3. We tried everything and nothing seemed to work. Then we got our hands on a Sony EX1 and had no problems bringing in the footage and it looked great.
I think part of the issue was that the JVC camera uses some type of wrapper to emulate the XDCAM footage, and is not true XDCAM.
The other thing that annoyed me about the whole "XDCAM" on the JVC is that I was told the only way to record in the XDCAM format was to buy a $500 SxS adapter. Then we could record on either the SxS card OR the SD card. Now just a couple months later, JVC comes out and says that they have a firmware update that eliminates the need for the SxS adapter! That did not make me happy! I am hoping that JVC will make things right by allowing me to return the adapter, or at least provide some type of credit towards my next purchase, but I doubt it.
Of course overall I am happy with the camera, but I would not buy it if you plan on relying on the XDCAM feature.
Hope that helps
Ken

? Matrox MX02

Similar Messages

Maybe you are looking for